1000 resultados para Efeito de marca-país
Resumo:
Alterações dos componentes atmosféricos, principalmente o aumento nas concentrações do dióxido de carbono, reconhecido como um dos principais gases de efeito estufa, estão levando a um progressivo e acelerado aumento da temperatura média global, a qual poderá alcançar de 2 a 4,5 ºC até o fim do século XXI, segundo dados do IPCC (2007). Desta forma, devido à importância do ambiente para o desenvolvimento de doenças de plantas, é estratégico o estudo dos efeitos do aumento da concentração do dióxido de carbono e das demais alterações climáticas sobre o desenvolvimento das doenças de importantes culturas do país. Este trabalho teve como objetivo verificar os efeitos de diferentes concentrações de CO2 atmosférico sobre o desenvolvimento da ferrugem (Puccinia psidii) em mudas de eucalipto. O experimento foi conduzido em sala climatizada, com as mudas mantidas em caixas plásticas transparentes e fechadas com uma placa de vidro. Após 13 dias da inoculação, verificou-se que o aumento da concentração de CO2 conduziu à redução do número de folhas lesionadas e uma tendência de redução do número de pústulas por planta.
Resumo:
A soja resistente ao glifosate (RR) é uma tecnologia que vem acrescentar mais uma ferramenta ao manejo de plantas daninhas para essa cultura, que possui a maior área plantada no país. Estudos buscando informações para o uso correto da soja transgênica na região de Campinas/SP são importantes devido ao uso cada vez mais freqüente desta prática agrícola em todo o Estado e no Brasil. O objetivo deste trabalho foi avaliar esta tecnologia na nodulação da soja cv. Valiosa RR em condições de casa de vegetação. Os tratamentos utilizados foram aplicações isoladas de Roundup Ready a 1,5, 2,0 e 3,0 L.ha-1; aplicações seqüenciais de Roundup Ready a 1,5/1,5; 2,0/1,5 e 2,0/1,5/1,5 L.ha-1, além de uma testemunha absoluta. O número e as biomassas fresca e seca dos nódulos foram determinados nos estádios R3 e R5. Apesar de terem sido observadas reduções em alguns dos parâmetros avaliados, estas foram não significativas.
Resumo:
EFEITO DA APLICAÇÃO CONTINUADA DE BIOSÓLIDO NA COMPARTIMENTALIZAÇÃO DE METAIS EM SOLO CULTIVADO COM BANANA (MUSA SPP). MA040 Germana Breves Rona1; Fernanda Ardilha1; Fernanda Serrenho1; Sarai de Alcantara1; Daniel Vidal Perez2; Luiz A.S. Melo3., germanarona@hotmail.com 1Instituto de Química/UFRJ, Av. Brig. Trompovsky, s/nº, Cidade Universitária, CEP 21949-900, Rio de Janeiro (RJ); 2Embrapa Solos, R. Jardim Botânico, 1024, CEP: 22460-000, Rio de Janeiro (RJ). 3Embrapa Meio Ambiente, Caixa Postal 69, CEP: 13820-000, Jaguariúna (SP) (INTRODUÇÃO) O lodo de esgoto é rico em matéria orgânica e nutrientes, podendo substituir, ainda que parcialmente, os fertilizantes minerais. Graças a essas características, esse resíduo pode desempenhar importante papel na produção agrícola e na manutenção da fertilidade do solo. Entretanto, esse composto apresenta materiais pesados em sua composição. Assim torna-se necessário ponderar as variações das formas disponíveis desses elementos. Nesse sentido, a extração seqüencial é uma metodologia que permite avaliar o destino principal de dado metal no solo em função de suas preferências de ligação química na matriz organomineral. No entanto, essa análise consome muito tempo e reagente. A possibilidade de relacionar essa extração complexa com uma mais simples seria interessante. É o objetivo do presente trabalho, portanto, avaliar a relação entre uma metodologia de extração seqüencial e os dois métodos de extração simples mais usados no Brasil, Mehlich 1 e DTPA. (METODOLOGIA) As amostras foram coletadas em um ensaio instalado no campo experimental da Embrapa-Meio Ambiente (Jaguariúna, SP) em um Argissolo Vermelho- Amarelo. O delineamento experimental foi o de blocos ao acaso com 5 repetições. Os tratamentos estudados foram: 1. fertilização mineral (NPK), com base na análise de solo; 2. aplicação de lodo de esgoto com base na sua concentração de nitrogênio e mantendo a metade da quantidade aplicada na fertilização mineral (N/2); 3 aplicação de lodo de esgoto mantendo a quantidade de N aplicada na fertilização mineral (N); 4. duas vezes a concentração de lodo de esgoto aplicada no tratamento 3 (2N). Dois tipos de lodo foram aplicados: entre 2000 e 2004 usou-se lodo originário da região de Barueri (SP), tipicamente industrial.; em 2005 foi aplicado lodo originário do município de Jundiaí (SP), que pode ser considerado de característica doméstica. Ambos foram fornecidos pela SABESP, na forma adequada para aplicação agrícola. As amostras de solo foram coletadas na profundidade de 0-20 cm no ano de 2006. A extração seqüencial foi a descrita por Wasserman et al. (2005). As extrações simples, DTPA e Mehlich 1 seguiram a metodologia da Embrapa (1997). A determinação de Fe, Cu, Zn e Cr foi realizada por ICP-OES (PE OTIMA 3000). (RESULTADOS) As extrações simples de Fe, Cu, Zn e Cr correlacionaram-se positiva e significativamente com as principais fases do solo ligadas à biodisponibilidade. Os elementos Fe e Zn, extraídos tanto por Mehlich 1, como por DTPA, correlacionaram-se com mais significânica com a Fase 1, ligada à CTC do solo. Já os elementos Cu e Cr, correlacionaram-se melhor com a Fase 3, relacionada à matéria orgânica. O Mn extraído por DTPA apresentou melhor correlação com a Fase 1. (CONCLUSÃO) Todos os metais analisados apresentaram uma tendência em aumentarem sua concentração total em função da dose de lodo aplicada. As fases 1 e 3 apresentam importância neste sentido, sendo este um motivo de grande preocupação, por serem frações biodisponíveis, podendo agravar seriamente, os riscos de contaminação pelos metais em questão. No entanto, as concentrações encontradas são bem menores que aquelas recomendadas pela CONAMA no375/2006. Agradecimentos: CNPq, FAPERJ, FUJB, Embrapa
Resumo:
EFEITO RESIDUAL DA APLICAÇÃO DE BIOSÓLIDO NA CULTURA DO MILHO. MA039 Fernanda Ardilha dos Santos1; Fernanda Gonçalves Serrenho1; Germana Breves Rona1; Sarai de Alcantara1; Daniel Vidal Perez2; Wagner Bettiol3 ; Waldemore Moriconi3, fernanda.ardilha@oi.com.br (1) Instituto de Química, UFRJ, (2) Embrapa Solos, RJ, (3) Embrapa Meio Ambiente (INTRODUÇÃO) A operação de uma Estação de Tratamento de Esgoto visa diminuir a carga poluente que seria lançada nos corpos receptores. Porém um novo problema é gerado: a disposição do lodo de esgoto, ou biossólido. Uma opção seria a disposição em aterro sanitário, que agrava ainda mais o problema de manejo do lixo urbano. Uma alternativa razoável seria a sua utilização como condicionador de solo e/ou fertilizantes, já que o biossólido promove a reciclagem de matéria orgânica e nutrientes. Entretanto, metais pesados são facilmente encontrados na composição de um biossólido. A utilização desse material para fins agrícolas pode causar alterações nos teores desses metais e na sua dispersão, tanto na fase sólida quanto na líquida do solo, com conseqüências ainda pouco conhecidas para nossas condições. O objetivo deste trabalho é estudar o impacto causado pelo uso agrícola do biossólido, de origem doméstica/industrial, nos teores e na evolução dos elementos Mn, Zn, Cu, Ni, Cd e Cr. (METODOLOGIA) A área experimental situou-se em Jaguariúna (SP), em Latossolo Vermelho Distroférrico (textura argilosa). O delineamento experimental escolhido foi o de fatorial (2 x 6) em blocos ao acaso, com 3 repetições, em que um tratamento correspondeu a uma dose aplicada, antes do plantio de milho, do lodo de esgoto. Os tratamentos estudados constaram de uma Testemunha Absoluta, Testemunha convencional (NPK), 1, 2, 4 e 8 vezes a dose de lodo de esgoto, calculada com base na adubação de N, requerida pela cultura do milho. O outro tratamento se refere ao tipo de lodo de esgoto utilizado, que foi fornecido pela SABESP, a saber: Barueri (Industrial) e de Franca (Doméstico), em SP. A amostragem ocorreu em novembro de 2004,2005,2006 e 2007 sendo a profundidade de coleta de 0-20cm. A técnica de extração seqüencial utilizada foi a descrita por Wasserman et al. (2005). As determinações analíticas dos metais estudados foram realizadas por ICP-OES(PE OPTIMA 3000). (RESULTADOS) Para o Zn, com o aumento da dose aplicada, observa-se um aumento significativo na concentração das fases 1e 2 e em menor grau na fase 5. Para o Cu observa-se um aumento na concentração de todas as frações em função do aumento da dose aplicada de lodo sendo a fase 5 desprezível. Nota-se que, apesar da tendência do Cu formar complexos com a matéria orgânica, é a fase 2 a mais representativa, sendo que a fase 1 apresenta alguma importância nas doses mais elevadas. O Cr sofreu um aumento na concentração total com o aumento da dose de lodo aplicada, apresentando um incremento nas concentrações de todas as fases exceto a fase 5. Todas as concentrações totais dos elementos estudados aumentaram em função do aumento das doses de lodo aplicadas. Vale ressaltar que o ano de 2003 foi o último onde houve aplicação do biossólido. Portanto, a amostragem feita em 2006 já se refere a um estudo de atenuação natural. Ademais, os resultados são relativos a aplicação do lodo de Barueri já que este apresenta concentrações metálicas mais elevadas e o comportamento dos elementos são semelhantes para distintoas fontes de lodo. (CONCLUSÃO) As concentrações nas fases aumentaram em função do aumento da concentração de lodo utilizada. As fases 1 e 2 apresentam importância neste sentido sendo este um motivo de grande preocupação, por serem frações biodisponíveis, podendo agravar seriamente, os riscos de contaminação pelos metais em questão. No entanto, as concentrações encontradas são bem menores que aquelas recomendadas pela CONAMA no375/2006 . Isto indica que a utilização do lodo oriundo das ETES na agricultura é uma solução bastante viável para sua disposição final, sendo uma prática já adotada em vários países (Ludivice et al, 2000). Agradecimentos: CNPq, FAPERJ, FUJB, EMBRAPA
Resumo:
The objective of this work was to determine the influence of hyperconjugative interactions on the ¹J CH coupling constant for hexamethylenetetramine (1) and adamantane (2). For this end, theoretical and experimental ¹J CH were obtained and hyperconjugative interactions were investigated using NBO. It was observed, theoretically and experimentally, that ¹J CH in 1 is 20 Hz larger than in 2, mainly due to the nN®s*C-H hyperconjugative interaction. This interaction occurs only in 1, with an energy of 9.30 kcal mol-1. It increases the s-character of the carbon atom in the C-H bond and the occupancy of the sigma*C-H orbital in (1).
Resumo:
It is very well known that the addition of polymers to a liquid increases the shear viscosity of the solution. In other words, the polymer increases the dissipation of the flow energy. Contrarily, in turbulent flow, some particular macromolecules in very low concentration are able to produce large attenuation in the turbulence and thus, decreasing the dissipation of the energy. This article present a brief revision about macroscopic and molecular models used to explain this dynamic effect. Some of the experimental techniques used to quantify the attenuation of the turbulence and the main active substances are also discussed.
Resumo:
The study of female broiler breeders is of great importance for the country as poultry production is one of the largest export items, and Brazil is the second largest broiler meat exporter. Animal behavior is known as a response to the effect of several interaction factors among them the environment. In this way the internal housing environment is an element that gives hints regarding to the bird s thermal comfort. Female broiler breeder behavior, expresses in form of specific pattern the bird s health and welfare. This research had the objective of applying predictive statistical models through the use of simulation, presenting animal comfort scenarios facing distinct environmental conditions. The research was developed with data collected in a controlled environment using Hybro - PG® breeding submitted to distinct levels of temperature, three distinct types of standard ration and age. Descriptive and exploratory analysis were proceeded, and afterwards the modeling process using the Generalized Estimation Equation (GEE). The research allowed the development of the thermal comfort indicators by statistical model equations of predicting female broiler breeder behavior under distinct studied scenarios.
Resumo:
The rice husk and its ash are abundant and renewable and can be used to obtain alternative building materials. An increase in the consumption of such waste could help minimize the environmental problems from their improper disposal. This study aimed to evaluate the use of ashes as a cargo mineral (filler). However, the rice husk chemically interferes in the conduct of the based cement mixtures. Thus, different mixes cement-rice husk with and without the addition of ash were evaluated in order to highlight the influence of its components (husk; ash), which could otherwise be excluded or be underestimated. Cylindrical samples (test of simple compression and traction by diametrical compression) and samples extracted from manufactured pressed board (test of bending and parallel compression to the surface), were used to evaluate the behavior of different mixtures of components (rice hush; RHA - rice husk ahs). The results of the mechanical tests showed, in general, there is not a statistical difference between the mixtures, which are associated with the chemical suppressive effect of the rice husk ash. The mixture of rice husk of 10 mm, with an addition of 35% of the rice husk ash, is notable for allowing the highest consumption of rice husk and rice husk ash, to reduce 25% the consumption of cement and to allow the storage (without emissions to the atmosphere), around 1.9 ton of CO2 per ton of cement consumed, thus contributing to the reduction of CO2 emissions, which can stimulate rural constructions under an ecological point of view.
Resumo:
Kohleria eriantha (Benth.) Hanst is a plant belonging to the family Gesneriaceae, with an underground organ, which is associated with vegetative reproduction. This organ is a rhizome, whose stem bears buds covered with modified leaves that store up starch. In small sections of this rhizome, containing six buds (1.5 to 2.0cm long), only one bud sprouted. The sprouted bud could be differentiated into two morphological pattern: aerial part or rhizome. Sprouting of the rhizome pattern occurred in sections kept on substrate with low water content (1mL of water), or lacking water, whereas sprouting of the aerial part pattern occurred in sections on substrate with high water content (12mL of water). Temperature at 20ºC also stimulated sprouting of the rhizome pattern, regardless of the water volume in the substrate. Sprouting of the rhizome pattern occurred still in sections on substrate to which polyethylene glycol 6000 (PEG) solution was added at the concentrations of 161.2, 235.2 and 340.0g/L, resulting in potentials of -3, -6 and -12 MPa, respectively. Sections kept on substrate with low water content (1 ml of water) showed a reduction in the dry matter content and high osmotic concentration in comparison with those on substrate with high water content. The results obtained revealed that forming of the rhizome pattern was influenced by water content and temperature. It is suggested that sprouting of the rhizome pattern was induced by the low water potential in the sections, when kept on substrate with low water content. Moreover, it was observed that the rhizome buds of Kohleria eriantha showed a high degree of plasticity.
Resumo:
The objective of this study was to quantify the effect of plonk on compressive behavior and mechanical attributes such as consistency, optimum moisture for compaction and maximum density of a Red-Yellow Latosol (Oxisol) to evaluate the effect of plonk and compaction state in splashed particles, from Lavras (MG) region. The plonk was obtained from an artisanal sugarcane brandy alembic. Undisturbed and disturbed soil samples were collected at 0 to 3 cm and 60 to 63 cm depths. Disturbed soil samples were used for soil characterization, determination of consistence limits and Normal Proctor essay after material incubation with plonk. Undisturbed soil samples were saturated with plonk or distilled water (control) during 48 hours for testing the compressibility and resistance to splash by using simulated rainfall. The plonk altered the consistence limits of studied layers. For the 0-3 cm layer, the plonk reduced the friable range, and for the 60-63 cm layer the effect was in the opposite direction. For both layers, the plonk increased Dmax and decreased Uoptimum. Regardless of the plonk treatment, both layers presented the same load support capacity. The compaction degree of samples influenced the splash erosion. The increase of the applied pressure over the samples resulted in increase of splash material quantity. At the 60-63 cm layer, the plonk treatment reduced the splash material quantity by increasing the applied pressure, mainly when the samples were at field capacity.
Resumo:
Dental materials that release fluoride have been shown to be effective in caries inhibition around restorations. Adhesive materials would also be effective in caries inhibition by sealing and protecting cavity margins from acidic demineralization. This in vitro study tested the hypothesis that composite restorations with a dentin adhesive system have a caries preventive effect similar to that of an adhesive material with fluoride - glass-ionomer cement - on root surfaces. Twenty roots from extracted sound third molars were embedded in polystyrene resin and ground flat. Standardized cavities were prepared in leveled root surfaces and randomly restored with (a) Chelon-Fil (Espe) or (b) Z100/SingleBond (3M). Baseline indentations were measured at 100, 200 and 300 mum from the occlusal margins of each restoration and the surface microhardness values were obtained using a Knoop diamond indenter. A 2.0 mm wide margin around the restorations was submitted to a pH-cycling model, at 37ºC. After that, surface microhardness was measured again, as it was before. The differences between baseline and final surface microhardness were considered for statistical analysis. The median values of differences were (a): -3.8; -0.3; -1.0; and (b): 3.3; 2.5; 1.7, for the distances of 100, 200 and 300 mum, respectively. The Kruskal-Wallis test did not show statistically significant difference between 100, 200 and 300 mum distances in each tested group. There was no difference between the studied materials at the distances of 200 and 300 mum. Chelon-Fil was statistically different from Z100/SingleBond, at 100 mum (p<0.05). Under the studied conditions, the glass-ionomer cement had a higher caries preventive effect than the composite/dentin adhesive restorations.
Resumo:
The present work evaluated the effect of low doses of X-irradiation on the repairing process of sutured and nonsutured skin wounds in rats. For that, rats underwent a surgical proceedure, in which a 20 x 5-millimeter rectangular wound approximately 2-millimeter-deep was made in the dorsal region of each animal, and were divided in four groups: nonirradiated nonsutured; irradiated nonsutured ; nonirradiated sutured and irradiated sutured. The animals under irradiation were protected, during exposure, with a 2-millimeter-thick lead apron in such a way that only the incision was irradiated. Each animal was submitted to 18 seconds of exposure, undergoing a total of 7.4 rads. The evaluation of the effects of X-rays on the repairing process was carried out through microscopic observation by means of hematoxylin-eosin staining for morphological evaluation, and silver impregnation under polarized light for the observation of collagen synthesis. The results have shown that X-irradiation has caused delay in the repairing process, but it did not stop its development. The irradiated nonsutured group was considered to show the greater delay when compared with the other groups.
Resumo:
The aim of this study was to investigate the influence of different assessment time periods of submaximal tests on the determination of the maximal accumulated oxygen deficit (MAOD), through the adoption of different time slots of 4 to 6, 6 to 8 and 8 to 10 min. Ten cyclists with mean age of 27.5 ± 4.1 years, body mass 74.4 ± 12.7 kg and time experience of 9.8 ± 4.7 years participated in this study. The athletes underwent an incremental exercise test to determine the peak oxygen consumption (VO2peak), and four submaximal constant work-load test sessions (60, 70, 80 and 90% VO2peak) of 10 min in order to estimate the O2 demand (DEO2). The mean VO2 values obtained on each constant work-load for the 4 to 6, 6 to 8 and 8 to 10 min time-periods intervals were used to perform a linear regression between the intensity and O2 consumption for each time-period. In addition, the subjects performed one supramaximal rectangular test (110% VO2peak) for the quantification of MAOD. There was no significant difference in VO2 between the different time-periods for all submaximal tests (P> 0.05). Similarly, no significant difference was found in DEAO2 and MAOD (P> 0.05). Furthermore, the values of MAOD for the three time-periods intervals showed good agreement and strong correlation. Thus, the data suggest that the submaximal tests used to estimate the values of MAOD can be reduced, at least in this type of sample, and with the use of a cycle simulator.
Resumo:
INTRODUCTION: Armies from all over the world acknowledge the importance of good physical fitness for the performance of military duties. The Military Exercise Training (MET) attempts to provide assistance to this search for better physical fitness and performance. OBJECTIVE: To verifying the effect on the body composition and physical performance of the students at ESPCEX (Military School for Preparation of Army Cadets) after 13 weeks of MET. METHODS: The sample was formed by 287 male students from the ESPCEX, whose average age was 18.33 ±1.26. Such students accomplished a boarding school routine, having defined schedules, meals and activities from which they were only released during the weekends. The MET was accomplished five days a week and it comprised both aerobic and resistance training. Measurement of body mass, height, skinfold (triceps, abdominal and suprailiac) was accomplished during pre and post training periods, and the following tests were performed: 12-minutes-run, oblique sit up, arm push up and pull up. Fat percentage, fat-free body mass and fat body mass were calculated using the anthropometric data based on the Guedes 3 skinfold protocol. RESULTS: Significant reduction in fat body mass, fat percentage and in triceptal and abdominal skinfold, as well as increase in suprailiac skinfold and fat-free body mass was observed when anthropometric and body composition data were compared, during the initial and the final periods of training. Significant improvement also occurred in all prformed physical tests, in which better performance was achieved. CONCLUSION: The acquired data suggest that performance of MET 5 days a week brought significantly improved body composition as well as physical performance
Resumo:
The association of 0,03 % v/w pectinase (Clarex), 0,6 % v/w invertase (Invertase-S) and 0,5 % w/w glucose isomerase (Taka-sweet) in industrialized banana (Musa cavendishii) pulp, under conditions of hydrolysis 40oC, 15 minutes, was observed and compared to other three enzymatic treatements: 0,03 % v/w pectinase (Clarex); 0,03 % v/w pectinase (Clarex) associated to 0,6 % v/w invertase (Invertase-S); and 0,03 % v/w pectinase (Sigma) associated to 0,03 % cellulase (Sigma) to determine the quality using a group of physical, physico-chemical, chemical, microbiological and sensory properties of the banana juices obtained. These properties had not differ significantly in function of pectinases and celulase employed. The addition of invertase had increased sweetness and decreased viscosity in juice. On the other side, the addition of glucose isomerase in inverted juice was not able in increasing significantly fructose content.