When does charisma matter for top-level leaders? Effect of attributional ambiguity

One stream of leadership theory suggests leaders are evaluated via inferential observer processes that compare the fit of the target to a prototype of an ideal (charismatic) leader. Attributional theories of leadership suggest that evaluations depend on knowledge of past organizational performance, which is attributed to the leader's skills. We develop a novel theory showing how inferential and attributional processes simultaneously explain top-level leader evaluation and ultimately leader retention and selection. We argue that observers will mostly rely on attributional mechanisms when performance signals clearly indicate good or poor performance outcomes. However, under conditions of attributional ambiguity (i.e., when performance signals are unclear), observers will mostly rely on inferential processes. In Study 1 we tested our theory in an unconventional context-the U.S. presidential election-and found that the two processes, due to the leader's charisma and country economic performance, interact in predicting whether a leader is selected. Using a business context and an experimental design, in Study 2 we show that CEO charisma and firm performance interact in predicting leader retention, confirming the results we found in Study 1. Our results suggest that this phenomenon is quite general and can apply to various performance domains.

Organisaation kehittämisen merkitys yrityksen tulokselle. Tapaustutkimus Elimäen Osuuspankista

Tutkimuksen tarkastelukohteena oli organisaation kehittämisen merkitys yrityksen tulokselle. Tutkielma jakaantui teoreettiseen ja empiiriseen osaan. Teoriaosassa muodostettiin viitekehys organisaation kehittämisen menetelmien ymmärtämiseksi ja siihen vaikuttavien osatekijöiden jaottelemiseksi. Työn empiirisessä osassa tätä viitekehystä hyödynnettiin kysely- ja haastattelututkimuksen sekä asiakas- ja henkilökyselyn pohjana. Organisaation kehittäminen on organisaation ja yksilön oppimista, kykyä oppia ja soveltaa oppimaansa käytäntöön siten, että se saa aikaan taloudellista tulosta. Yrityksen tulos voidaan jakaa taloudelliseen ja laadulliseen tulokseen. Taloudellinen tulos mitataan numeerisesti tilinpäätöksessä. Laadullinen tulos liittyy asiakkuuteen, oppimiskykyyn, sosiaalisen ja inhimillisen arvon mittaamiseen tai tietopääoman kehitykseen, jota voidaan mitata esimerkiksi asiakas- ja henkilöstötutkimuksin. Jotta organisaation kehittämisellä olisi merkitystä yrityksen tulokselle, tulee kehittämistyön olla pitkäjänteistä, systemaattista ja suunnitemallista pohjautuen yrityksen visioon.

Clustering and International Competitiveness of Information Technology Industry in the Saint Petersburg Area

The main objective of this study is to assess the potential of the information technology industry in the Saint Petersburg area to become one of the new key industries in the Russian economy. To achieve this objective, the study analyzes especially the international competitiveness of the industry and the conditions for clustering. Russia is currently heavily dependent on its natural resources, which are the main source of its recent economic growth. In order to achieve good long-term economic performance, Russia needs diversification in its well-performing industries in addition to the ones operating in the field of natural resources. The Russian government has acknowledged this and started special initiatives to promote such other industries as information technology and nanotechnology. An interesting industry that is basically less than 20 years old and fast growing in Russia, is information technology. Information technology activities and markets are mainly concentrated in Russia’s two biggest cities, Moscow and Saint Petersburg, and areas around them. The information technology industry in the Saint Petersburg area, although smaller than Moscow, is especially dynamic and is gaining increasing foreign company presence. However, the industry is not yet internationally competitive as it lacks substantial and sustainable competitive advantages. The industry is also merely a potential global information technology cluster, as it lacks the competitive edge and a wide supplier and manufacturing base and other related parts of the whole information technology value system. Alone, the industry will not become a key industry in Russia, but it will, on the other hand, have an important supporting role for the development of other industries. The information technology market in the Saint Petersburg area is already large and if more tightly integrated to Moscow, they will together form a huge and still growing market sufficient for most companies operating in Russia currently and in the future. Therefore, the potential of information technology inside Russia is immense.

Kymenlaaksolaisten kuljetusyritysten taloudellisen suorituskyvyn kehitys vuosina 1997-2007

Tämän Pro gradu -tutkielman tarkoituksena on tutustua suomalaiseen kuljetustoimialaan erityisesti liiketoiminnallisesta näkökulmasta ja tarkastella suurimpien kymenlaaksolaisten kuljetusyritysten taloudellisen suorituskyvyn sekä muun talouden kehitystä vuosien 1997–2007 aikana. Lisäksi tässä tutkimuksessa pyritään löytämään selittäviä strategisia tekijöitä kymenlaaksolaisyritysten taloudelliselle menestykselle. Kymenlaakson alueen kuljetusyritysten taloudellisen suorituskyvyn osatekijät pysyttelevät koko Suomen kuljetusyritysten lukujen tavoin tutkimuksen tarkastelujakson ajan keskimäärin tyydyttävällä tasolla. Kannattavuuden ja vakavaraisuuden osalta kymenlaaksolaisyritykset näyttävät menestyvän hieman muuta Suomea paremmin, mutta toisaalta yritysten maksukykyisyys jää muita alemmaksi. Tutkimusjakson selkein kehitys kuljetusyrityksillä liittyy sekä huomattavaan toimintakustannusten että liiketoiminnan koon kasvuun. Tutkimuksen kuljetusyrityksistä erityisesti pienimmät ja perinteikkäät, ainoastaan kuljetuspalveluiden tarjontaan keskittyneet toimijat vaikuttavat menestyvän taloudellisesti muita yrityksiä paremmin. Tutkimusyritysten joukossa esiintyy kuitenkin paljon vaihtelua ja mukaan mahtuu niin menestyjiä kuin heikompiakin toimijoita.

Clustering and international competitiveness of information technology industry in the Saint Petersburg area

The main objective of this study is to assess the potential of the information technology industry in the Saint Petersburg area to become one of the new key industries in the Russian economy. To achieve this objective, the study analyzes especially the international competitiveness of the industry and the conditions for clustering. Russia is currently heavily dependent on its natural resources, which are the main source of its recent economic growth. In order to achieve good long-term economic performance, Russia needs diversification in its well-performing industries in addition to the ones operating in the field of natural resources. The Russian government has acknowledged this and started special initiatives to promote such other industries as information technology and nanotechnology. An interesting industry that is basically less than 20 years old and fast growing in Russia, is information technology. Information technology activities and markets are mainly concentrated in Russia’s two biggest cities, Moscow and Saint Petersburg, and areas around them. The information technology industry in the Saint Petersburg area, although smaller than Moscow, is especially dynamic and is gaining increasing foreign company presence. However, the industry is not yet internationally competitive as it lacks substantial and sustainable competitive advantages. The industry is also merely a potential global information technology cluster, as it lacks the competitive edge and a wide supplier and manufacturing base and other related parts of the whole information technology value system. Alone, the industry will not become a key industry in Russia, but it will, on the other hand, have an important supporting role for the development of other industries. The information technology market in the Saint Petersburg area is already large and if more tightly integrated to Moscow, they will together form a huge and still growing market sufficient for most companies operating in Russia currently and in the future. Therefore, the potential of information technology inside Russia is immense.

Geography of talent and regional differences in Spain

Tentative empirical evidence suggests that the agglomeration of talent contributes to regional development. However, given that talented people are not evenly distributed across regions, this paper seeks to determine how the concentration of talent affects patterns of regional development. Here, we empirically evaluate the effects of the distribution of talent on regional differences by means of a detailed analysis of the 17 Autonomous Communities of Spain between 1996 and 2004. We hypothesise that regions specialising in strategic sectors that are creative and which can be assumed to enjoy rapid growth in productivity will experience faster rates of development and, in turn, that this concentration of talent will have a positive impact on the region’s economic performance. Thus, we believe that this mechanism can explain the marked regional imbalances in Spain. Our findings confirm that regional differences, measured in terms of GDP per capita and by, - industrial and service- oriented production, are influenced by the Communities’ talent bases as determined by, educational attainment and employment in assumed to be strategic for regional development, inasmuch as these sectors provide economic specialization.

Trust in inter-organizational relationships

Trust in inter-organizational collaborative relationships has attracted substantial research interest among academics and practitioners. Previous studies have concentrated on the benefits of trust to business outcomes and economic performance, as it is considered to be a source of competitive advantage. Despite this increased level of interest, there is no consensus, much less overall agreement, about how it should be conceptualized or about the number of dimensions it incorporates. On the inter-organizational level there is an obvious challenge in defining both the trusting party and the objects of trust. Thus, the notion of trust as an under-theorized and poorly understood phenomenon still holds. Hence, the motivation of this study was fuelled by the need to increase our knowledge and understanding of the role and nature of trust in inter-organizational collaborative relationships. It is posited that there is a call for more understanding about its antecedents and consequences, as well as about the very concept in inter-organizational collaborative relationships. The study is divided into two parts. The first part gives a general overview, and the second part comprises four research publications. Both qualitative and quantitative research methodology is utilized. A multi-method research design was used because it provides different levels of data and different perspectives on the phenomenon. The results of this study reveal that trust incorporates three dimensions on both the individual and the organizational level: capability, goodwill, and self-reference. Trust develops from the reputation and behavior of the trusted party. It appears from this study that trust is clearly directed towards both individual boundary spanners and the counterpart company itself – i.e. not only to one or the other. The trusting party, on the other hand, is always an individual, and not the organization per se. Trust increases collaboration benefits and lowers collaboration drawbacks, thus having a positive effect on relationship performance. The major contribution of this study lies in uncovering the critical points and drawbacks in prior research and thereby in responding to the highlighted challenges. The way in which these challenges were addressed offers contributions to three major issues in the emerging theory of trust in the inter-organizational context: firstly, this study clarifies the trustor-trustee discussion; secondly, it conceptualizes trust as existing on both individual and organizational levels; and thirdly, it provides more information about the antecedents of trust and the ways in which it affects relationship performance.

Mobiilitehdaskonseptin soveltaminen puutalotuotantoon

Tullit ja kuljetuskustannukset haittaavat suomalaisten puutuotteiden hintakilpailua Venäjällä, mikä on luonut tarpeen uudenlaisten toimintamallien kehittämiselle. Tutkimuksen hypoteesina on, että soveltamalla teorioita mobiilista tuotantojärjestelmästä puutalotuotantoon pystytään vastaamaan aluerakennustoiminnan ongelmiin ja saavuttamaan kustannusetuja. Tämän työn tavoitteena on antaa yritysjohdolle kuvaus siirrettävän talotehtaan tuotantokonseptista ja arvioida toiminnan kannattavuutta. Työn tulosten avulla pyritään vastaamaan kysymyksiin: millainen on siirrettävä puutalotehdas ja onko mobiilitehdaskonsepti puutalotuotannossa taloudellisesti kannattava. Tutkimusta tarkastellaan Venäjän liiketoiminta- ja Venäjän puurakentamiskontekstissa. Tutkimus on laadullinen tapaustutkimus, jossa käytettiin useiden menetelmien yhdistelmää. Tutkimusmenetelmät sisälsivät sekä teknisen suunnittelun että kannattavuuden arvioinnin menetelmiä. Työn tekninen osa perustui tehdassuunnittelun ja konseptin kehittämisen menetelmiin. Taloudellisessa tarkastelussa käytettiin tuloslaskelmaa sekä tuottoasteen ja takaisinmaksuajan menetelmiä. Eri tekijöiden vaikutusta kannattavuuteen arvioitiin herkkyysanalyysilla. Työssä esitellään mobiilin talotehtaan tehdassuunnitelma ja tuotantokonsepti sekä sivutaan logistista konseptia. Mobiiliin talotehtaaseen sovellettiin mobiilitehdaskonseptia ja verstastuotantomallia. Mobiili talotehdas koostuu kokoonpanolinjasta, jota täydennetään esivalmistusverstailla. Investoinnille laskettiin kannattavuutta kuvaavat tunnusluvut, joiden perusteella mobiilitehdas todettiin kannattamattomaksi ja riskialttiiksi. Kannattavuuden epävarmuutta analysoitiin herkkyysanalyysillä. Kannattavuuteen vaikuttavat merkittävästi muuttuvien kustannusten ja myyntihinnan muutokset. Työssä annetaan toimenpide-ehdotuksia siirrettävän talotuotannon konseptin kehittämiseen. Keskeiset jatkotutkimuskohteet liittyvät mobiilitehtaan elinkierron toimintojen ja osakonseptien kehittämiseen.

Integrating corporate social responsibility into business in Finnish consumer goods companies

The motives for this study originated from the notion that surprisingly little academic literature is found on actually managing and putting corporate social responsibility (CSR) into practice, in comparison with the definitions and frameworks of the concept itself. Regardless of the author, CSR has been considered consisting of three dimensions: economic, social and environmental. The question behind the three dimensions has always been whether socially and environmentally responsible behavior can lead to increased economic performance and improve the competitiveness of a company. Most of the current CSR development has related to the quantification of environmental and social performance in order to review these along with the established financial key ratios, which are based on the law and the reporting obligation of the companies. However, the previous research has mainly focused on US companies whereas studies with a European viewpoint, let alone Nordic, have been mostly lacking. Furthermore, it has been discovered recently that the integration of corporate responsibility into business is identified as the greatest challenge in CSR management in Finnish large companies. Therefore the integration of CSR into business in Finnish consumer goods companies provided an interesting, topical and somewhat obscure purpose for this study. This was further divided into three research questions concerning the reasons for CSR engagement, the role of the stakeholders and the practice of corporate responsibility. This study did not aim to build a new theory; instead an explorative viewpoint was regarded more appropriate. Accordingly, qualitative research approach and case study design were adopted in the study. Semi-structured theme interviews were used as a primary data collection method and complemented with secondary data such as websites, responsibility reports and another recent CSR study. There were four Finnish managers as interviewees of whom three presented companies and one non-profit organization. The results were somewhat convergent but differences arose as a result of the companies being at different stages as regards corporate responsibility. However, this provided only more insight into the implementation of CSR. The voluntary CSR initiatives, responsibility reporting, stakeholders and CSR management were identified as the most important viewpoints on the practical side of CSR, besides a key requirement for the integration of CSR into business to be credible was found to be a favorable management attitude. Based on the findings of this study it was admitted that giving concrete advice on CSR management is really a challenge and there is no one generally accepted and right manner to integrate corporate responsibility successfully into business.

Feasibility of industrial implementation of laser cutting into paper making machine

Laser cutting implementation possibilities into paper making machine was studied as the main objective of the work. Laser cutting technology application was considered as a replacement tool for conventional cutting methods used in paper making machines for longitudinal cutting such as edge trimming at different paper making process and tambour roll slitting. Laser cutting of paper was tested in 70’s for the first time. Since then, laser cutting and processing has been applied for paper materials with different level of success in industry. Laser cutting can be employed for longitudinal cutting of paper web in machine direction. The most common conventional cutting methods include water jet cutting and rotating slitting blades applied in paper making machines. Cutting with CO2 laser fulfils basic requirements for cutting quality, applicability to material and cutting speeds in all locations where longitudinal cutting is needed. Literature review provided description of advantages, disadvantages and challenges of laser technology when it was applied for cutting of paper material with particular attention to cutting of moving paper web. Based on studied laser cutting capabilities and problem definition of conventional cutting technologies, preliminary selection of the most promising application area was carried out. Laser cutting (trimming) of paper web edges in wet end was estimated to be the most promising area where it can be implemented. This assumption was made on the basis of rate of web breaks occurrence. It was found that up to 64 % of total number of web breaks occurred in wet end, particularly in location of so called open draws where paper web was transferred unsupported by wire or felt. Distribution of web breaks in machine cross direction revealed that defects of paper web edge was the main reason of tearing initiation and consequent web break. The assumption was made that laser cutting was capable of improvement of laser cut edge tensile strength due to high cutting quality and sealing effect of the edge after laser cutting. Studies of laser ablation of cellulose supported this claim. Linear energy needed for cutting was calculated with regard to paper web properties in intended laser cutting location. Calculated linear cutting energy was verified with series of laser cutting. Practically obtained laser energy needed for cutting deviated from calculated values. This could be explained by difference in heat transfer via radiation in laser cutting and different absorption characteristics of dry and moist paper material. Laser cut samples (both dry and moist (dry matter content about 25-40%)) were tested for strength properties. It was shown that tensile strength and strain break of laser cut samples are similar to corresponding values of non-laser cut samples. Chosen method, however, did not address tensile strength of laser cut edge in particular. Thus, the assumption of improving strength properties with laser cutting was not fully proved. Laser cutting effect on possible pollution of mill broke (recycling of trimmed edge) was carried out. Laser cut samples (both dry and moist) were tested on the content of dirt particles. The tests revealed that accumulation of dust particles on the surface of moist samples can take place. This has to be taken into account to prevent contamination of pulp suspension when trim waste is recycled. Material loss due to evaporation during laser cutting and amount of solid residues after cutting were evaluated. Edge trimming with laser would result in 0.25 kg/h of solid residues and 2.5 kg/h of lost material due to evaporation. Schemes of laser cutting implementation and needed laser equipment were discussed. Generally, laser cutting system would require two laser sources (one laser source for each cutting zone), set of beam transfer and focusing optics and cutting heads. In order to increase reliability of system, it was suggested that each laser source would have double capacity. That would allow to perform cutting employing one laser source working at full capacity for both cutting zones. Laser technology is in required level at the moment and do not require additional development. Moreover, capacity of speed increase is high due to availability high power laser sources what can support the tendency of speed increase of paper making machines. Laser cutting system would require special roll to maintain cutting. The scheme of such roll was proposed as well as roll integration into paper making machine. Laser cutting can be done in location of central roll in press section, before so-called open draw where many web breaks occur, where it has potential to improve runability of a paper making machine. Economic performance of laser cutting was done as comparison of laser cutting system and water jet cutting working in the same conditions. It was revealed that laser cutting would still be about two times more expensive compared to water jet cutting. This is mainly due to high investment cost of laser equipment and poor energy efficiency of CO2 lasers. Another factor is that laser cutting causes material loss due to evaporation whereas water jet cutting almost does not cause material loss. Despite difficulties of laser cutting implementation in paper making machine, its implementation can be beneficial. The crucial role in that is possibility to improve cut edge strength properties and consequently reduce number of web breaks. Capacity of laser cutting to maintain cutting speeds which exceed current speeds of paper making machines what is another argument to consider laser cutting technology in design of new high speed paper making machines.

Uma interpretação do Primeiro Milagre Econômico Alemão (1933-1944)

The German Third Reich was successful in reaching its economical objectives. It is intended to explain the causes of the First German Economic Miracle, fitting its economic system into the category of command economy, which does not confuse itself with the centrally planned economy. Thus, in the first section, we describe the so adopted politics in this period and explain how they had led to the recovery of the German economy. The second section evaluates global indicators of economic performance and population welfare. We are looking for to demonstrate the hypothesis that the Nazi economy was efficient. Such efficiency is explained by the characteristics of the German model.

Liberalização financeira, estabilidade macroeconômica e crescimento econômico nos países do BRIC

The objective of this paper is to analyze the relationship between exchange rate regime, capital account convertibility and economic growth in 1990-2007 period within the emerging countries that constitute what has been called BRIC - Brazil, Russia, India and China. Our hypothesis is that economic performance of these countries is the result, at least partially, of the quality of the macroeconomic policy management adopted in each country, in which exchange rate policy, capital account convertibility and the degree of external vulnerability plays a key role.

Coping with globalization: Asian versus Latin American strategies of development, 1980-2010

When compared to Latin America, Asian economies since 1980 have grown faster and have done so with relatively modest inequalities. Why? A comparison of Asia and Latin America underlines the superiority of the nationalist capitalist model of development, which has often been pursued more explicitly in Asia, over that of a dependent capitalist model, which has often been pursued in Latin America. In comparison to Latin America, the Asian model has facilitated higher and less volatile rates of economic growth and a greater political room to pursue social democratic policies. The "tap root" of these alternate pathways is relative autonomy from global constraints: states and economies in Asia have been more nationalist and autonomous than in Latin America.

Les expériences sociales et universitaires d’étudiants internationaux au Québec, le cas de l’Université de Montréal : comprendre leur persévérance aux études

Notre recherche a pour objet la persévérance aux études supérieures d’étudiants internationaux à l’Université de Montréal (UdeM) inscrits en programme de recherche (maîtrise et doctorat). L’objectif général de cette étude est d’explorer leurs conditions de vie et d’études afin de tendre vers une compréhension approfondie leur persévérance à l’UdeM. Constatant l’augmentation des migrations étudiantes, nous avons choisi de nous intéresser aux expériences sociales et universitaires d’étudiants internationaux. Des étudiants en mobilité internationale arrivent dans un pays et une université qu’ils ne connaissent pas ou peu et dans une nouvelle ville et une nouvelle culture qui leur sont souvent étrangères. Toutefois, nous ignorons beaucoup des conditions de vie et d’études des étudiants internationaux aux cycles supérieurs alors qu’ils jouent un rôle clé au chapitre des performances économique et scientifique des pays et institutions qui les accueillent. Dès lors, nous voulons comprendre comment des étudiants internationaux inscrits en programmes de recherche (maîtrise et doctorat) persévèrent à l’Université de Montréal. Cette thèse expose donc les points relatifs aux conditions d’accueil, d’intégration et de formation d’étudiants internationaux inscrits en programme de recherche à l’Université de Montréal. Nous partons des contextes canadiens et québécois de l’internationalisation de l’enseignement supérieur pour analyser la trame de l’expérience desdits étudiants, depuis les conditions scolaires, sociales et personnelles de leurs milieux d’accueil. Ainsi, la thèse nous plonge dans l’univers de ces étudiants et présente de nombreux points d’intérêt et une contribution à la sociologie de l’enseignement supérieur. Nous avons analysé les aspects relatifs aux caractéristiques des étudiants susceptibles de favoriser ou compromettre leur persévérance (Tinto, 1993) et les expériences scolaires et sociales de ces étudiants et le sens qu’ils donnent à ces expériences (Dubet, 1994; Rochex, 1995) et, enfin, nous avons exploré les trois temps de l’affiliation (Coulon, 1997). La question de recherche est la suivante : quels sont les aspects associés aux caractéristiques des étudiants (Tinto), à leurs expériences sociales (Dubet) et à l’apprentissage du métier d’étudiant (Coulon) susceptibles d’influencer la persévérance aux études chez les étudiants internationaux ? En ce qui concerne la méthodologie, cette recherche est de type exploratoire et repose sur une démarche d’investigation qualitative. Notre étude s’est attachée à décrire le cheminement scolaire des étudiants internationaux, nous avons tenté de tirer du sens de données institutionnelles mises à disposition. Des entretiens auprès de huit étudiants internationaux ont été réalisés. Nous proposons un survol des facteurs freinant ou favorisant la poursuite des études. Finalement, l’analyse compréhensive des entretiens suggère une forte capacité de résilience et l’importance d’une solidarité entre étudiants internationaux, en dépit de l’absence de bourses d’études ou d’autres soutiens financiers. Concernant leur intégration sociale et académique, si le Canada est décrit comme une société accueillante, les étudiants internationaux ont encore à surmonter des barrières culturelles et linguistiques, ils souffrent également d’un manque d’amitiés interculturelles faisant en sorte qu’ils ressentent un malaise général. Les échos de leurs récits suggèrent également l’importance des interactions de qualité avec leurs directions de recherche. Les étudiants internationaux ont besoin du soutien intellectuel, moral et financier de leur direction de recherche. Ces dernières sont souvent et systématiquement décrites comme première, voire unique, source d’informations. Elles sont aussi reconnues comme favorisant la persévérance aux études. Dans un tout autre ordre de déterminant, les étudiants internationaux mentionnent également que leur bien-être (physique et psychologique) dépend également de leur alimentation et la pratique de leur religion. Par exemple, certains sont véritablement en lutte pour accepter une alimentation totalement différente de celle de chez eux. De toute évidence, l’alimentation, la langue et la religion sont décrites comme véhicule de maintien de leur identité culturelle, au Canada et ce maintien est important pour leur bien-être et leur confort général dans le pays d’accueil. La recherche a permis de rendre plus audible la vie universitaire et sociale de ces étudiants jusque-là méconnue au Québec et à Montréal. L’approche exploratoire et compréhensive a montré que les migrations pour études répondent avant tout à des choix individuels liés à des aspirations sociales et professionnelles élevées. Mais, la décision de persévérer dépend de l’interrelation entre les stratégies individuelles et les contraintes migratoires, économiques et sociales. La thèse contribue à une meilleure compréhension de l’expérience des étudiants internationaux, notamment en montrant comment leur persévérance s’accompagne d’une fragilité et ces connaissances sont importantes pour les universités qui cherchent à accroître leur place sur le marché international de l’enseignement supérieur.

Effect of Improving Energy Efficiency on System Reliability

In the present scenario of energy demand overtaking energy supply top priority is given for energy conservation programs and policies. Most of the process plants are operated on continuous basis and consumes large quantities of energy. Efficient management of process system can lead to energy savings, improved process efficiency, lesser operating and maintenance cost, and greater environmental safety. Reliability and maintainability of the system are usually considered at the design stage and is dependent on the system configuration. However, with the growing need for energy conservation, most of the existing process systems are either modified or are in a state of modification with a view for improving energy efficiency. Often these modifications result in a change in system configuration there by affecting the system reliability. It is important that system modifications for improving energy efficiency should not be at the cost of reliability. Any new proposal for improving the energy efficiency of the process or equipments should prove itself to be economically feasible for gaining acceptance for implementation. In order to arrive at the economic feasibility of the new proposal, the general trend is to compare the benefits that can be derived over the lifetime as well as the operating and maintenance costs with the investment to be made. Quite often it happens that the reliability aspects (or loss due to unavailability) are not taken into consideration. Plant availability is a critical factor for the economic performance evaluation of any process plant.The focus of the present work is to study the effect of system modification for improving energy efficiency on system reliability. A generalized model for the valuation of process system incorporating reliability is developed, which is used as a tool for the analysis. It can provide an awareness of the potential performance improvements of the process system and can be used to arrive at the change in process system value resulting from system modification. The model also arrives at the pay back of the modified system by taking reliability aspects also into consideration. It is also used to study the effect of various operating parameters on system value. The concept of breakeven availability is introduced and an algorithm for allocation of component reliabilities of the modified process system based on the breakeven system availability is also developed. The model was applied to various industrial situations.