Experimental and Computational Studies on Copper and Hydrobenzoin Derivatives in Catalytic Asymmetric Reactions

The use of theory to understand and facilitate catalytic enantioselective organic transformations involving copper and hydrobenzoin derivatives is reported. Section A details the use of theory to predict, facilitate, and understand a copper promoted amino oxygenation reaction reported by Chemler et al. Using Density Functional Theory (DFT), employing the hybrid B3LYP functional and a LanL2DZ/6-31G(d) basis set, the mechanistic details were studied on a N-tosyl-o-allylaniline and a [alpha]-methyl-[gamma]-alkenyl sulfonamide substrate. The results suggest the N-C bond formation proceeds via a cisaminocupration, and not through a radical-type mechanism. Additionally, the origin of diastereoselection observed with [alpha]-methyl-[gamma]-alkenyl sulfonamide arises from avoidance of unfavourable steric interactions between the methyl substituent and the N -protecting group. Section B details the computationally guided, experimental investigation of two hydrobenzoin derivatives as ligands/ catalysts, as well as the attempted synthesis of a third hydrobenzoin derivative. The bis-boronic acid derived from hydrobenzoin was successful as a Lewis acid catalyst in the Bignielli reaction and the Conia ene reaction, but provided only racemic products. The chiral diol derived from hydrobenzoin successfully increased the rate of the addition of diethyl zinc to benzaldehyde in the presence of titanium tetraisopropoxide, however poor enantioinduction was obseverved. Notably, the observed reactivity was successfully predicted by theoretical calculations.

(A) BODIPY as a versatile fluorophore (B) Synthesis of PNAs via Staudinger reaction

(A) In recent years, 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY) fluorophores have attracted considerable interest due to their unique photochemical properties. However detailed studies on the stability of BODIPY and analogues under acidic and basic conditions have been lacking. Thus the stability of a series of BODIPY analogues in acidic (di- and trichloroacetic acid) and basic (aqueous ammonium hydroxide) conditions was investigated using 11B NMR spectroscopy. Among the analogues tested, 4,4-diphenyl BODIPY was the most stable under the conditions used in the experiments. It was found that reaction of 4,4-dimethoxy BODIPY with dichloroacetic acid gave mixed anhydride 4,4-bis(dichloroacetoxy) BODIPY in good yields. Treatment of the latter mixed anhydride with alcohols such as methanol and ethanol in the presence of a base afforded corresponding borate esters, whereas treatment with 1,2-diols such as ethylene glycol and catechol in the presence of a base gave corresponding cyclic borate esters. Furthermore treatment of 4,4-difluoro-8-methyl-BODIPY with secondary amines in dihalomethane resulted in carbon–carbon bond formation at the meso-methyl position of BODIPY via Mannich-type reactions. The resulting modified BODIPY fluorophores possess high fluorescent quantum yields. Five BODIPY analogues bearing potential ion-binding moieties were synthesized via this Mannich-type reaction. Among these, the BODIPY bearing an aza-18-crown-5 tether was found to be selective towards copper (II) ion, resulting in a large blue shift in absorption and sharp fluorescent quenching, whereas aza-15-crown-4 analogue was selected towards fluoride ion, leading to effective florescent quenching and blue shift. (B) Peptide nucleic acids (PNA), as mimics of natural nucleic acids, have been widely applied in molecular biology and biotechnology. Currently, the preparation of PNA oligomers is commonly achieved by a coupling reaction between carboxyl and amino groups in the presence of an activator. In this thesis attempts were made towards the synthesis of PNA through the Staudinger ligation reactions between C-terminal diphenylphosphinomethanethiol thioesters and N-terminal α-azido PNA building blocks.

Mirroring Enzymes: The Role of H-Bonding In HQuin-BAM Catalyzed Asymmetric Aza-Henry Reactions: A DFT Study into the Reactivity, Mechanism, and Origins of Selectivity

The exact mechanistic understanding of various organocatalytic systems in asymmetric reactions such as Henry and aza-Henry transformations is important for developing and designing new synthetic organocatalysts. The focus of this dissertation will be on the use of density functional theory (DFT) for studying the asymmetric aza-Henry reaction. The first part of the thesis is a detailed mechanistic investigation of a poorly understood chiral bis(amidine) (BAM) Brønsted acid catalyzed aza-Henry reaction between nitromethane and N-Boc phenylaldimine. The catalyst, in addition to acting as a Brønsted base, serves to simultaneously activate both the electrophile and the nucleophile through dual H-bonding during C-C bond formation and is thus essential for both reaction rate and selectivity. Analysis of the H-bonding interactions revealed that there was a strong preference for the formation of a homonuclear positive charge-assisted H-bond, which in turn governed the relative orientation of substrate binding. Attracted by this well-defined mechanistic investigation, the other important aspect of my PhD research addressed a detailed theoretical analysis accounting for the observed selectivity in diastereoselective versions of this reaction. A detailed inspection of the stereodetermining C-C bond forming transition states for monoalkylated nitronate addition to a range of electronically different aldimines, revealed that the origins of stereoselectivity were controlled by a delicate balance of different factors such as steric, orbital interactions, and the extent of distortion in the catalyst and substrates. The structural analysis of different substituted transition states established an interesting dependency on matching the shape and size of the catalyst (host molecule) and substrates (guest molecules) upon binding, both being key factors governing selectivity, in essence, offering an analogy to positive cooperative binding effect of catalytic enzymes and substrates in Nature. In addition, both intra-molecular (intra-host) and inter-molecular (host-guest, guest-guest) stabilizing interactions play a key role to the high π-facial selectivity. The application of dispersion-corrected functionals (i.e., ωB97X-D and B3LYP-D3) was essential for accurately modeling these stabilizing interactions, indicating the importance of dispersion effects in enantioselectivity. As a brief prelude to more extensive future studies, the influence of a triflate counterion on both reactivity and selectivity in this reaction was also addressed.

The role of GAPDH in maintaining the functional state of the DNA repair enzyme APE1

Les sites apuriniques/apyrimidiniques (AP) sont des sites de l’ADN hautement mutagène. Les dommages au niveau de ces sites peuvent survenir spontanément ou être induits par une variété d’agents. Chez l’humain, les sites AP sont réparés principalement par APE1, une enzyme de réparation de l’ADN qui fait partie de la voie de réparation par excision de base (BER). APE1 est une enzyme multifonctionnelle; c’est une AP endonucléase, 3’-diestérase et un facteur redox impliqué dans l’activation des facteurs de transcription. Récemment, il a été démontré qu’APE1 interagit avec l’enzyme glycolytique GAPDH. Cette interaction induit l’activation d’APE1 par réduction. En outre, la délétion du gène GAPDH sensibilise les cellules aux agents endommageant l’ADN, induit une augmentation de formation spontanée des sites AP et réduit la prolifération cellulaire. A partir de toutes ces données, il était donc intéressant d’étudier l’effet de la délétion de GAPDH sur la progression du cycle cellulaire, sur la distribution cellulaire d’APE1 et d’identifier la cystéine(s) d’APE1 cible(s) de la réduction par GAPDH. Nos travaux de recherche ont montré que la déficience en GAPDH cause un arrêt du cycle cellulaire en phase G1. Cet arrêt est probablement dû à l’accumulation des dommages engendrant un retard au cours duquel la cellule pourra réparer son ADN. De plus, nous avons observé des foci nucléaires dans les cellules déficientes en GAPDH qui peuvent représenter des agrégats d’APE1 sous sa forme oxydée ou bien des focis de la protéine inactive au niveau des lésions d’ADN. Nous avons utilisé la mutagénèse dirigée pour créer des mutants (Cys en Ala) des sept cystéines d’APE1 qui ont été cloné dans un vecteur d’expression dans les cellules de mammifères. Nous émettons l’hypothèse qu’au moins un mutant ou plus va être résistant à l’inactivation par oxydation puisque l’alanine ne peut pas s’engager dans la formation des ponts disulfures. Par conséquent, on anticipe que l’expression de ce mutant dans les cellules déficientes en GAPDH pourrait restaurer une distribution cellulaire normale de APE1, libérerait les cellules de l’arrêt en phase G1 et diminuerait la sensibilité aux agents endommageant l’ADN. En conclusion, il semble que GAPDH, en préservant l’activité d’APE1, joue un nouveau rôle pour maintenir l’intégrité génomique des cellules aussi bien dans les conditions normales qu’en réponse au stress oxydatif.

Micelles polyioniques ternaires pour la libération intracellulaire d’oligonucleotides

Les oligonucléotides (ONs) antisens présentent un fort potentiel en tant qu’agents thérapeutiques. Toutefois, leurs propriétés physicochimiques limitent leur utilisation en thérapie génique. Pour pallier aux divers obstacles, des systèmes de vectorisation, tels que les micelles polyioniques (PICMs), ont été développés. Grâce à leur structure unique, les micelles protégent l’ON contre une dégradation prématurée et le couplage d’un ligand à leur surface augmente leur spécificité et leur internalisation. Dans d’autres systèmes, un polymère adjuvant aux propriétés pH-sensibles peut être ajouté pour faciliter la sortie de l’endosome et augmenter l’efficacité de l’ON. L’objectif général de ce mémoire était de mettre au point des PICMs ternaires ciblées pour l’administration d’ONs. Ces micelles assureraient à la fois l’internalisation cellulaire de leur cargaison en interagissant avec des récepteurs cellulaires et sa fuite de l’endosome grâce à un mécanisme de déstabilisation de la membrane endosomale. Pour cela, des PICMs composées d’un copolymère cationique de type poly(éthylène glycol)-bloc-poly(méthacrylate d’(alkylamino)éthyle) et d’un copolymère d’acide méthacrylique ont été préparées. Les propriétés physicochimiques de ces vecteurs ont démontré qu’ils permettaient une condensation efficace de l’acide nucléique et ce, indépendamment de la nature du polymère cationique et de l’acide nucléique. Finalement, une approche de couplage par pont disulfure a été développée afin de greffer au copolymère un fragment d’anticorps dirigé contre les récepteurs de la transferrine. En conclusion, ces travaux démontrent la versatilité et le potentiel des PICMs ternaires en tant que vecteurs d’acide nucléique, et proposent une méthodologie de couplage d’un ligand afin de formuler des PICMs ciblées.

New insights into the substrate specificities of microbial transglutaminase: a biocatalytic perspective

La transglutaminase microbienne (Microbial transglutaminase : MTG) est fortement exploitée dans l’industrie textile et alimentaire afin de modifier l’apparence et la texture de divers produits. Elle catalyse la formation de liaisons iso-peptidiques entre des protéines par l’entremise d’une réaction de transfert d’acyle entre le groupement γ-carboxamide d’une glutamine provenant d’un substrat donneur d’acyle, et le groupement ε-amino d’une lysine provenant d’un substrat accepteur d’acyle. La MTG est tolérante à un large éventail de conditions réactionnelles, ce qui rend propice le développement de cette enzyme en tant que biocatalyseur. Ayant pour but le développement de la MTG en tant qu’alternative plus soutenable à la synthèse d’amides, nous avons étudié la réactivité d’une gamme de substrats donneurs et accepteurs non-naturels. Des composés chimiquement diversifiés, de faible masse moléculaire, ont été testés en tant que substrats accepteurs alternatifs. Il fut démontré que la MTG accepte une large gamme de composés à cet effet. Nous avons démontré, pour la première fois, que des acides aminés non-ramifiés et courts, tels la glycine, peuvent servir de substrat accepteur. Les α-acides aminés estérifiés Thr, Ser, Cys et Trp, mais pas Ile, sont également réactifs. En étendant la recherche à des composés non-naturels, il fut observé qu’un cycle aromatique est bénéfique pour la réactivité, bien que les substituants réduisent l’activité. Fait notable, des amines de faible masse moléculaire, portant les groupements de forte densité électronique azidure ou alcyne, sont très réactives. La MTG catalyse donc efficacement la modification de peptides qui pourront ensuite être modifiés ou marqués par la chimie ‘click’. Ainsi, la MTG accepte une variété de substrats accepteurs naturels et non-naturels, élargissant la portée de modification des peptides contenant la glutamine. Afin de sonder le potentiel biocatalytique de la MTG par rapport aux substrats donneurs, des analogues plus petits du peptide modèle Z-Gln-Gly furent testés; aucun n’a réagi. Nous avons toutefois démontré, pour la première fois, la faible réactivité d’esters en tant que substrats donneurs de la MTG. L’éventuelle amélioration de cette réactivité permettrait de faire de la MTG un biocatalyseur plus général pour la synthèse d’amides. Mots clés: Lien amide, biocatalyse, biotransformation, transglutaminase, arrimage moléculaire, criblage de substrats, ingénierie de substrats.

First Example of Organocatalysis by Polystyrene-Supported PAMAM Dendrimers: Highly Efficient and Reusable Catalyst for Knoevenagel Condensations

This paper describes the first use of polystyrene-supported poly(amidoamine) (PAMAM) dendrimers as heterogeneous basic organocatalysts for carbon–carbon bond formation. Polystyrene-supported PAMAM dendrimers of first, second and third generations have been used as reusable base catalysts in Knoevenagel condensations of carbonyl compounds with active methylene compounds. The reactions proceed in short periods of time and with 100% selectivity. This novel catalyst eliminates the use of aromatic and halogenated solvents, as well as complex purification processes. The catalysts can be recycled ten times.

Two complementary molecular energy decomposition schemes: the Mayer and Ziegler-Rauk methods in comparison

In the present paper we discuss and compare two different energy decomposition schemes: Mayer's Hartree-Fock energy decomposition into diatomic and monoatomic contributions [Chem. Phys. Lett. 382, 265 (2003)], and the Ziegler-Rauk dissociation energy decomposition [Inorg. Chem. 18, 1558 (1979)]. The Ziegler-Rauk scheme is based on a separation of a molecule into fragments, while Mayer's scheme can be used in the cases where a fragmentation of the system in clearly separable parts is not possible. In the Mayer scheme, the density of a free atom is deformed to give the one-atom Mulliken density that subsequently interacts to give rise to the diatomic interaction energy. We give a detailed analysis of the diatomic energy contributions in the Mayer scheme and a close look onto the one-atom Mulliken densities. The Mulliken density ρA has a single large maximum around the nuclear position of the atom A, but exhibits slightly negative values in the vicinity of neighboring atoms. The main connecting point between both analysis schemes is the electrostatic energy. Both decomposition schemes utilize the same electrostatic energy expression, but differ in how fragment densities are defined. In the Mayer scheme, the electrostatic component originates from the interaction of the Mulliken densities, while in the Ziegler-Rauk scheme, the undisturbed fragment densities interact. The values of the electrostatic energy resulting from the two schemes differ significantly but typically have the same order of magnitude. Both methods are useful and complementary since Mayer's decomposition focuses on the energy of the finally formed molecule, whereas the Ziegler-Rauk scheme describes the bond formation starting from undeformed fragment densities

L´onconasa com a model per l´estudi de les bases moleculars de la citotoxicitat de les ribonucleases pancreàtiques. Aplicacions a la construcció de ribonucleases amb activitat antimicrobiana

La primera part d'aquest treball s´ha centrat en la caracterització i optimització del procés d'activació de l´onconasa recombinant per tal d'obtenir l´enzim igual a la forma nativa. Per això, les reaccions d'eliminació de la Met-1 i la ciclació de la Glu1, necessàries per generar el piroglutamic han estat seguides per MALDI-TOF MS. La segona part d´aquest treball s´ha centrat en l´estudi de la contribució del pont disulfur 30-75 de l´onconasa a les seves propietats biològiques. Els resultats suggereixen que el potencial redox del citosol cel·lular podria reduir el pont disulfur 30-75 de l´onconasa salvatge afectant la unió onconasa -inhibidor proteic de ribonucleases. La tercera part ha consistit en la construcció de variants de l´HP-RNasa i onconasa amb activitat bactericida. Per això, s´ha introduït el determinant bactericida (YRWR) descrit per la proteïna catiònica d'eosinòfils en els dos enzims. Els resultats obtinguts han evidenciat que les dues ribonucleases amb el determinant bactericida presenten activitat citotòxica contra bacteris gram-negatius preferentment.

Thermo-responsive microphase separated supramolecular polyurethanes

The ability to generate very stable assemblies via non-covalent interactions has enabled materials to be constructed that were not feasible via traditional covalent bond formation processes. A series of low molecular mass bisurethane and bisurea polymers have been developed that form stable self-assembled networks through hydrogen bonding interactions. Thermo-responsive polymers were generated by end-capping poly(ethylene-co-butylene) or polybutadiene chains with the bisurethane or bisurea motif. Microphase separation is observed via TEM and small-angle X-ray scattering (SAXS) for the modified pseudo polymers and significant differences in the temperature dependence of microphase separation are analysed via SAXS. The importance of the polarity of the end groups is manifested in distinct temperature-dependent microphase separation behaviour. Information on the local hydrogen bonding structure is provided by wide-angle X-ray scattering and variable temperature FTI

A tungsten complex containing a highly delocalized metal-ligand system

Nucleophilic attack of (triphenylphosphonio) cyclopentadienide on the dichlorodiazomethane-tungsten complex trans[ BrW(dppe)(2)(N2CCl2)]PF6 [dppe is 1,2-bis(diphenylphosphino) ethane] results in C-C bond formation and affords the title compound, trans-[W(C24H18ClN2P)Br(C26H24P2)(2)]PF6 center dot 0.6CH(2)Cl(2). This complex, bis[1,2- bis(diphenylphosphino)ethane] bromido{chloro[3-(triphenylphosphonio) cyclopentadienylidene] diazomethanediido} tungsten hexafluorophosphate dichloromethane 0.6-solvate, contains the previously unknown ligand chloro[3-(triphenylphosphonio) cyclopentadienylidene] diazomethane. Evidence from bond lengths and torsion angles indicates significant through-ligand delocalization of electron density from tungsten to the nominally cationic phosphorus(V) centre. This structural analysis clearly demonstrates that the tungsten-dinitrogen unit is a powerful pi-electron donor with the ability to transfer electron density from the metal to a distant acceptor centre through an extended conjugated ligand system. As a consequence, complexes of this type could have potential applications as nonlinear optical materials and molecular semiconductors.

Big and little Meccano

The emergence of the mechanical bond during the past 25 years is giving chemistry a fillip in more ways than one. While its arrival on the scene is already impacting materials science and molecular nanotechnology, it is providing a new lease of life to chemical synthesis where mechanical bond formation Occurs as a consequence of the all-important templation Orchestrated by molecular recognition and self-assembly. The way in which covalent bond formation activates noncovalent bonding interactions, switching on molecular recognition that leads to self-assembly, and the template-directed synthesis of mechanically interlocked molecules-of which the so-called catenanes and rotaxanes may be regarded as the prototypes-has introduced a level of integration into chemical synthesis that has not previously been attained jointly at the supramolecular and molecular levels. The challenge now is to carry this I vel of integration during molecular synthesis beyond relatively small molecules into the realms of precisely functionalized extended molecular Structures and superstructures that perform functions in a collective manner as the key sources of instruction, activation, and performance in multi-component integrated Circuits and devices. These forays into organic chemistry by a scientific nomad are traced through thick and thin from the Athens of the North to the Windy City by Lake Michigan with interludes on the edge of the Canadian Shield beside Lake Ontario, in the Socialist Republic of South Yorkshire, on the Plains of Cheshire beside the Wirral, in the Midlands in the Heartland of Albion, and in the City of Angels beside the Peaceful Sea. (C) 2008 Elsevier Ltd. All rights reserved.

Stochiometrically governed molecular interactions in drug: Poloxamer solid dispersions

This study probes the molecular interactions between model drugs and poloxamers that facilitate dissolution rate improvements using solid dispersions. Ibuprofen and ketoprofen solid dispersions were prepared at different mole ratios using poloxamers 407 and 188. The carbonyl stretching vibration of the ibuprofen dimer shifted to higher wavenumber in the infrared spectra of 2:1 drug:carrier mole ratio solid dispersions, indicating disruption of the ibuprofen dimer concomitant with hydrogen bond formation between the drug and carrier. Solid dispersions with mole ratios >2:1 drug:carrier (up to 29:1) showed both ibuprofen hydrogen-bonded to the poloxamer, and excess drug present as dimers. X-ray diffraction studies confirmed these findings with no evidence of crystalline drug in 2:1 mole ratio systems whereas higher drug loadings retained crystalline ibuprofen. Similar results were found with ketoprofen-poloxamer solid dispersions. Thermal analysis of ibuprofen-poloxamer 407 solid dispersions and their resultant phase diagram suggested solid solutions and a eutectic system were formed, depending on drug loading. Dissolution studies showed fastest release from the solid solutions; dissolution rates from solid solutions were 12-fold greater than the dissolution of ibuprofen powder whereas the eutectic system gave a 6-fold improvement over the powder. When designing solid dispersions to improve the delivery of poorly-water soluble drugs, the nature of drug:carrier interactions, which are governed by the stochiometry of the composition, can affect the dissolution rate improvement.

Self-immolative linkers in polymeric delivery systems

There has been significant interest in the methodologies of controlled release for a diverse range of applications spanning drug delivery, biological and chemical sensors, and diagnostics. The advancement in novel substrate-polymer coupling moieties has led to the discovery of self-immolative linkers. This new class of linker has gained popularity in recent years in polymeric release technology as a result of stable bond formation between protecting and leaving groups, which becomes labile upon activation, leading to the rapid disassembly of the parent polymer. This ability has prompted numerous studies into the design and development of self-immolative linkers and the kinetics surrounding their disassembly. This review details the main concepts that underpin self-immolative linker technologies that feature in polymeric or dendritic conjugate systems and outlines the chemistries of amplified self-immolative elimination.

General aspects of organocatalytic cyclizations

Ring-forming reactions are an essential part of synthetic chemistry and allow access to a range of useful natural products and biologically important molecules. The applications of organocatalysis to the synthesis of functionalized, enantiopure structures really begins where organocatalysis itself begins; with the Hajos-Parrish reaction in the 1970s for the synthesis of steroids using proline. This chapter then will review the uses of organocatalysts in cyclization methodology – from the initial Hajos-Parrish discovery to current advances in the field.