System Architecture of a Mixed Reality Framework

In this paper the software architecture of a framework which simplifies the development of applications in the area of Virtual and Augmented Reality is presented. It is based on VRML/X3D to enable rendering of audio-visual information. We extended our VRML rendering system by a device management system that is based on the concept of a data-flow graph. The aim of the system is to create Mixed Reality (MR) applications simply by plugging together small prefabricated software components, instead of compiling monolithic C++ applications. The flexibility and the advantages of the presented framework are explained on the basis of an exemplary implementation of a classic Augmented Realityapplication and its extension to a collaborative remote expert scenario.

QoE-aware Multiple Path Video Transmission for Wireless Multimedia Sensor Networks

Wireless Multimedia Sensor Networks (WMSNs) promise a wide scope of emerging potential applications in both civilian and military areas, which require visual and audio information to enhance the level of collected information. The transmission of multimedia content requires a minimal video quality level from the user’s perspective. However, links in WMSN communi- cations are typically unreliable, as they often experience fluctuations in quality and weak connectivity, and thus, the routing protocol must evaluate the routes by using end-to-end link quality information to increase the packet delivery ratio. Moreover, the use multiple paths together with key video metrics can enhance the video quality level. In this paper, we propose a video-aware multiple path hierarchical routing protocol for efficient multimedia transmission over WMSN, called video-aware MMtransmission. This protocol finds node-disjoint multiple paths, and implements an end-to-end link quality estimation with minimal over- head to score the paths. Thus, our protocol assures multimedia transmission with Quality of Experience (QoE) and energy-efficiency support. The simula- tion results show the benefits of video-aware MMtransmission for disseminating video content by means of energy-efficiency and QoE analysis.

Real-World Energy Measurements of a Wireless Mesh Network

Over the past several years the topics of energy consumption and energy harvesting have gained significant importance as a means for improved operation of wireless sensor and mesh networks. Energy-awareness of operation is especially relevant for application scenarios from the domain of environmental monitoring in hard to access areas. In this work we reflect upon our experiences with a real-world deployment of a wireless mesh network. In particular, a comprehensive study on energy measurements collected over several weeks during the summer and the winter period in a network deployment in the Swiss Alps is presented. Energy performance is monitored and analysed for three system components, namely, mesh node, battery and solar panel module. Our findings cover a number of aspects of energy consumption, including the amount of load consumed by a mesh node, the amount of load harvested by a solar panel module, and the dependencies between these two. With our work we aim to shed some light on energy-aware network operation and to help both users and developers in the planning and deployment of a new wireless (mesh) network for environmental research.

Energy Efficiency Issues in Information-Centric Networking

In this paper we address energy efficiency issues of Information Centric Networking (ICN) architectures. In the proposed framework, we investigate the impact of ICN architectures on energy consumption of networking hardware devices and compare them with the energy consumption of other content dissemination methods. In particular, we investigate the consequences of caching in ICN from the energy efficiency perspective, taking into account the energy consumption of different hardware components in the ICN architectures. Based on the results of the analysis, we address the practical issues regarding the possible deployment and evolution of ICN from an energy-efficiency perspective. Finally, we summarize our findings and discuss the outlook/future perspectives on the energy efficiency of Information-Centric Networks.

Enhancing IEEE 802.11 Energy Efficiency for Continuous Media Applications

This paper proposes the Optimized Power save Algorithm for continuous Media Applications (OPAMA) to improve end-user device energy efficiency. OPAMA enhances the standard legacy Power Save Mode (PSM) of IEEE 802.11 by taking into consideration application specific requirements combined with data aggregation techniques. By establishing a balanced cost/benefit tradeoff between performance and energy consumption, OPAMA is able to improve energy efficiency, while keeping the end-user experience at a desired level. OPAMA was assessed in the OMNeT++ simulator using real traces of variable bitrate video streaming applications. The results showed the capability to enhance energy efficiency, achieving savings up to 44% when compared with the IEEE 802.11 legacy PSM.

Green Wireless-Energy Efficiency in Wireless Networks

Wireless networks have become more and more popular because of ease of installation, ease of access, and support of smart terminals and gadgets on the move. In the overall life cycle of providing green wireless technology, from production to operation and, finally, removal, this chapter focuses on the operation phase and summarizes insights in energy consumption of major technologies. The chapter also focuses on the edge of the network, comprising network access points (APs) and mobile user devices. It discusses particularities of most important wireless networking technologies: wireless access networks including 3G/LTE and wireless mesh networks (WMNs); wireless sensor networks (WSNs); and ad-hoc and opportunistic networks. Concerning energy efficiency, the chapter discusses challenges in access, wireless sensor, and ad-hoc and opportunistic networks.

Explicitly Context-Aware Publish/Subscribe with Context-Invariant Subscriptions

Although context could be exploited to improve the performance, elasticity and adaptation in most distributed systems that adopt the publish/subscribe (P/S) model of communication, only very few works have explored domains with highly dynamic context, whereas most adopted models are context agnostic. In this paper, we present the key design principles underlying a novel context-aware content-based P/S (CA-CBPS) model of communication, where the context is explicitly managed, focusing on the minimization of network overhead in domains with recurrent context changes thanks to contextual scoping. We highlight how we dealt with the main shortcomings of most of the current approaches. Our research is some of the first to study the problem of explicitly introducing context-awareness into the P/S model to capitalize on contextual information. The envisioned CA-CBPS middleware enables the cloud ecosystem of services to communicate very efficiently, in a decoupled, but contextually scoped fashion.

StreamCloud: An elastic and scalable data streaming system

Many applications in several domains such as telecommunications, network security, large scale sensor networks, require online processing of continuous data lows. They produce very high loads that requires aggregating the processing capacity of many nodes. Current Stream Processing Engines do not scale with the input load due to single-node bottlenecks. Additionally, they are based on static con?gurations that lead to either under or over-provisioning. In this paper, we present StreamCloud, a scalable and elastic stream processing engine for processing large data stream volumes. StreamCloud uses a novel parallelization technique that splits queries into subqueries that are allocated to independent sets of nodes in a way that minimizes the distribution overhead. Its elastic protocols exhibit low intrusiveness, enabling effective adjustment of resources to the incoming load. Elasticity is combined with dynamic load balancing to minimize the computational resources used. The paper presents the system design, implementation and a thorough evaluation of the scalability and elasticity of the fully implemented system.

Riding out of the storm: How to deal with the complexity of grid and cloud management

Over the last decade, Grid computing paved the way for a new level of large scale distributed systems. This infrastructure made it possible to securely and reliably take advantage of widely separated computational resources that are part of several different organizations. Resources can be incorporated to the Grid, building a theoretical virtual supercomputer. In time, cloud computing emerged as a new type of large scale distributed system, inheriting and expanding the expertise and knowledge that have been obtained so far. Some of the main characteristics of Grids naturally evolved into clouds, others were modified and adapted and others were simply discarded or postponed. Regardless of these technical specifics, both Grids and clouds together can be considered as one of the most important advances in large scale distributed computing of the past ten years; however, this step in distributed computing has came along with a completely new level of complexity. Grid and cloud management mechanisms play a key role, and correct analysis and understanding of the system behavior are needed. Large scale distributed systems must be able to self-manage, incorporating autonomic features capable of controlling and optimizing all resources and services. Traditional distributed computing management mechanisms analyze each resource separately and adjust specific parameters of each one of them. When trying to adapt the same procedures to Grid and cloud computing, the vast complexity of these systems can make this task extremely complicated. But large scale distributed systems complexity could only be a matter of perspective. It could be possible to understand the Grid or cloud behavior as a single entity, instead of a set of resources. This abstraction could provide a different understanding of the system, describing large scale behavior and global events that probably would not be detected analyzing each resource separately. In this work we define a theoretical framework that combines both ideas, multiple resources and single entity, to develop large scale distributed systems management techniques aimed at system performance optimization, increased dependability and Quality of Service (QoS). The resulting synergy could be the key 350 J. Montes et al. to address the most important difficulties of Grid and cloud management.

Node sampling using random centrifugal walks

Sampling a network with a given probability distribution has been identified as a useful operation. In this paper we propose distributed algorithms for sampling networks, so that nodes are selected by a special node, called the source, with a given probability distribution. All these algorithms are based on a new class of random walks, that we call Random Centrifugal Walks (RCW). A RCW is a random walk that starts at the source and always moves away from it. Firstly, an algorithm to sample any connected network using RCW is proposed. The algorithm assumes that each node has a weight, so that the sampling process must select a node with a probability proportional to its weight. This algorithm requires a preprocessing phase before the sampling of nodes. In particular, a minimum diameter spanning tree (MDST) is created in the network, and then nodes weights are efficiently aggregated using the tree. The good news are that the preprocessing is done only once, regardless of the number of sources and the number of samples taken from the network. After that, every sample is done with a RCW whose length is bounded by the network diameter. Secondly, RCW algorithms that do not require preprocessing are proposed for grids and networks with regular concentric connectivity, for the case when the probability of selecting a node is a function of its distance to the source. The key features of the RCW algorithms (unlike previous Markovian approaches) are that (1) they do not need to warm-up (stabilize), (2) the sampling always finishes in a number of hops bounded by the network diameter, and (3) it selects a node with the exact probability distribution.

Documentación en Arqueología. Aplicaciones del Núcleo Español de Metadatos

RESUMEN Las aplicaciones de los Sistemas de Información Geográfica (SIG) a la Arqueología, u otra disciplina humanística no son una novedad. La evolución de los mismos hacia sistemas distribuidos e interoperables, y estructuras donde las políticas de uso, compartido y coordinado de los datos sí lo son, estando todos estos aspectos contemplados en la Infraestructura de Datos Espaciales. INSPIRE es el máximo exponente europeo en cuestiones de iniciativa y marco legal en estos aspectos. La metodología arqueológica recopila y genera gran cantidad de datos, y entre los atributos o características intrínsecas están la posición y el tiempo, aspectos que tradicionalmente explotan los SIG. Los datos se catalogan, organizan, mantienen, comparten y publican, y los potenciales consumidores comienzan a tenerlos disponibles. Toda esta información almacenada de forma tradicional en fichas y posteriormente en bases de datos relacionadas alfanuméricas pueden ser considerados «metadatos» en muchos casos por contener información útil para más usuarios en los procesos de descubrimiento, y explotación de los datos. Además estos datos también suelen ir acompañados de información sobre ellos mismos, que describe su especificaciones, calidad, etc. Cotidianamente usamos los metadatos: ficha bibliográfica del libro o especificaciones de un ordenador. Pudiéndose definir como: «información descriptiva sobre el contexto, calidad, condición y características de un recurso, dato u objeto que tiene la finalidad de facilitar su recuperación, identificación,evaluación, preservación y/o interoperabilidad». En España existe una iniciativa para estandarizar la descripción de los metadatos de los conjuntos de datos geoespaciales: Núcleo Español de Metadatos (NEM), los mismos contienen elementos para la descripción de las particularidades de los datos geográficos, que incluye todos los registros obligatorios de la Norma ISO19115 y del estudio de metadatos Dublin Core, tradicionalmente usado en contextos de Biblioteconomía. Conscientes de la necesidad de los metadatos, para optimizar la búsqueda y recuperación de los datos, se pretende formalizar la documentación de los datos arqueológicos a partir de la utilización del NEM, consiguiendo así la interoperabilidad de la información arqueológica. SUMMARY The application of Geographical Information Systems (GIS) to Archaeology and other social sciences is not new. Their evolution towards inter-operating, distributed systems, and structures in which policies for shared and coordinated data use are, and all these aspects are included in the Spatial Data Infrastructure (SDI). INSPIRE is the main European exponent in matters related to initiative and legal frame. Archaeological methodology gathers and creates a great amount of data, and position and time, aspects traditionally exploited by GIS, are among the attributes or intrinsic characteristics. Data are catalogued, organised, maintained, shared and published, and potential consumers begin to have them at their disposal. All this information, traditionally stored as cards and later in relational alphanumeric databases may be considered «metadata» in many cases, as they contain information that is useful for more users in the processes of discovery and exploitation of data. Moreover, this data are often accompanied by information about themselves, describing its especifications, quality, etc. We use metadata very often: in a book’s bibliographical card, or in the description of the characteristics of a computer. They may be defined as «descriptive information regarding the context, quality, condition and characteristics of a resource, data or object with the purpose of facilitating is recuperation, identification, evaluation, preservation and / interoperability.» There is an initiative in Spain to standardise the description of metadata in sets of geo-spatial data: the Núcleo Español de Metadatos (Spanish Metadata Nucleus), which contains elements for the description of the particular characteristics of geographical data, includes all the obligatory registers from the ISO Norm 19115 and from the metadata study Dublin Core, traditionally used in library management. Being aware of the need of metadata, to optimise the search and retrieval of data, the objective is to formalise the documentation of archaeological data from the Núcleo Español de Metadatos (Spanish Metadata Nucleus), thus obtaining the interoperability of the archaeological information.

Procedimiento de diseño acústico y eletroacústico de sistemas tipo

El presente proyecto propone la creación de un procedimiento y metodología para el diseño de salas y sistemas electroacústicos basados en el software EASE. La sala tipo elegida para el diseño será una sala de cine bajo las premisas de DOLBY Digital. Los sistemas electroacústicos modelo serán: • Sistema distribuido tanto en malla cuadrada como hexagonal • Sistemas centralizados basados en agrupaciones, tanto lineales como circulares. Se establecerán los pasos básicos imprescindibles para el diseño de los sistemas descritos de forma que, con la ayuda de este tutorial y los medios didácticos adjuntos al mismo, se puedan acometer paso a paso las distintas fases de diseño, cálculo y análisis de los mismos. Como metodología de trabajo se acometerá el proceso de diseño de un ejemplo de cada tipo sobre el que se describirán todos los pasos, posibilidades de diseño y cálculo de los mismos. Los puntos de estudio serán: • Diseño de una sala de Cine ◦Importación de los Ficheros Autocad del cine a EASE ◦Dibujo del recinto en EASE ◦Inserción de materiales ◦Cálculo del tiempo de reverberación en función del volumen de la sala ◦Ajuste del tiempo de reverberación ◦Elección de altavoces para la sonorización ◦Comprobación de la uniformidad de campo sonoro en todos los canales ◦Comprobación de los niveles de pico y total por canal ◦Ecualización de la sala según la curva X (ISO-2969) ◦Inclusión de la Pantalla en la curva de ecualización ◦Estudios psicoacústico de la sala. Retardos ◦Inteligibilidad ◦Diagrama de bloques • Diseño de un sistema distribuido ◦Estudio de los diferentes tipos de solapamientos ▪Borde con Borde ▪Solapamiento mínimo ▪Centro con Centro ◦Estudio de los diferente tipos de mallas ▪Cuadrada ▪Hexagonal • Diseño de un sistema Centralizado ◦Sistemas centralizados tipo Linear Array ◦Sistemas centralizados tipo Circular Array Así mismo se estudiarán las diferentes posibilidades dentro de la suite EASE, incluyendo las versiones gratuitas del mismo EASE ADDRESS (sistemas distribuidos) y FOCUS II (sistemas centralizados), comparando sus posibilidades con los módulos comerciales equivalentes de EASE y las herramientas añadidas del mismo EARS (software para la auralización biaural) y AURA (utilidad de análisis extendido). ABSTRACT This project proposes the creation of a procedure and methodology for the design of rooms and electroacoustic systems based on EASE software. The room chosen as example design is a cinema under DOLBY Digital premises. Electroacoustic systems chosen as example are: • Distributed both square and hexagonal mesh • Centralized systems based on clusters, both linear and circular. It will be established the basic essential steps for the design of the systems described so, with this tutorial and attached teaching aids, could be undertaken the various stages of design, calculation and analysis. As a working methodology, the process design of an example will be described of each system on which all the steps described, design possibilities and calculation will be shown. The main points are: • Design of a cinema • Importing Autocad Files in EASE • Drawing with EASE • Materials insertion • Reverberation time based on the room volume • Adjusting reverberation time • Choosing speakers • Checking sound field uniformity in all channels • Checking peak levels and total level per each channel • Room equalization using X curve (ISO-2969) • Adding screen in the EQ • Psychoacoustic. Delays • Intelligibility • Block diagram • Design of a distributed system • Study of the different types of overlap o Edge to Edge o Minimum Overlap o Center to Center • Study of different types of mesh • Square • Hex • Centralized System Design • Centralized systems. Linear Array • Centralized systems. Circular Array It also will explore the different possibilities within the EASE suite, including the free versions of the same EASE ADDRESS (distributed systems) and FOCUS II (centralized), comparing its potential with commercial equivalents EASE modules and added tools EARS (software for biaural auralization) and AURA (utility extended analysis).