Mosquito (Diptera: Culicidae) Diversity of a Forest-Fragment Mosaic in the Amazon Rain Forest

To study the impact of Amazonian forest fragmentation on the mosquito fauna, an inventory of Culicidae was conducted in the upland forest research areas of the Biological Dynamics of Forest Fragments Project located 60 km north of Manaus, Amazonas, Brazil. The culicid community was sampled monthly between February 2002 and May 2003. CDC light traps, flight interception traps, manual aspiration, and net sweeping were used to capture adult specimens along the edges and within forest fragments of different sizes (1, 10, and 100 ha), in second-growth areas surrounding the fragments and around camps. We collected 5,204 specimens, distributed in 18 genera and 160 species level taxa. A list of mosquito taxa is presented with 145 species found in the survey, including seven new records for Brazil, 16 new records for the state of Amazonas, along with the 15 morphotypes that probably represent undescribed species. No exotic species [Aedes aegypti (L.) and Aedes albopictus (Skuse)] were found within the sampled areas. Several species collected are potential vectors of Plasmodium causing human malaria and of various arboviruses. The epidemiological and ecological implications of mosquito species found are discussed, and the results are compared with other mosquito inventories from the Amazon region.

Embryo Mitochondrial DNA Depletion Is Reversed During Early Embryogenesis in Cattle

The extensive replication of mitochondria during oogenesis and the wide variability in mitochondrial DNA ( mtDNA) copy numbers present in fully grown oocytes indicate that mtDNA amount may play an important role during early embryogenesis. Using bovine oocytes derived from follicles of different sizes to study the influence of mtDNA content on development, we showed that oocytes obtained from small follicles, known to be less competent in developing into blastocysts, contain less mtDNA than those originating from larger follicles. However, because of the high variability in copy number, a more accurate approach was examined in which parthenogenetic one-cell embryos were biopsied to measure their mtDNA content and then cultured to assess development capacity. Contrasting with previous findings, mtDNA copy number in biopsies was not different between competent and incompetent embryos, indicating that mtDNA content is not related to early developmental competence. To further examine the importance of mtDNA on development, one-cell embryos were partially depleted of their mtDNA (64% +/- 4.1% less) by centrifugation followed by the removal of the mitochondrial-enriched cytoplasmic fraction. Surprisingly, depleted embryos developed normally into blastocysts, which contained mtDNA copy numbers similar to nonmanipulated controls. Development in depleted embryos was accompanied by an increase in the expression of genes (TFAM and NRF1) controlling mtDNA replication and transcription, indicating an intrinsic ability to restore the content of mtDNA at the blastocyst stage. Therefore, we concluded that competent bovine embryos are able to regulate their mtDNA content at the blastocyst stage regardless of the copy numbers accumulated during oogenesis.

THE RIO APA CRATON IN MATO GROSSO DO SUL (BRAZIL) AND NORTHERN PARAGUAY: GEOCHRONOLOGICAL EVOLUTION, CORRELATIONS AND TECTONIC IMPLICATIONS FOR RODINIA AND GONDWANA

The Rio Apa cratonic fragment crops out in Mato Grosso do Sul State of Brazil and in northeastern Paraguay. It comprises Paleo-Mesoproterozoic medium grade metamorphic rocks, intruded by granitic rocks, and is covered by the Neoproterozoic deposits of the Corumbi and Itapocurni Groups. Eastward it is bound by the southern portion of the Paraguay belt. In this work, more than 100 isotopic determinations, including U-Pb SHRIMP zircon ages, Rb-Sr and Sm-Nd whole-rock determinations, as well as K-Ar and Ar-Ar mineral ages, were reassessed in order to obtain a complete picture of its regional geological history. The tectonic evolution of the Rio Apa Craton starts with the formation of a series of magmatic arc complexes. The oldest U-Pb SHRIMP zircon age comes from a banded gneiss collected in the northern part of the region, with an age of 1950 +/- 23 Ma. The large granitic intrusion of the Alumiador Batholith yielded a U-Pb zircon age of 1839 +/- 33 Ma, and from the southeastern part of the area two orthogneisses gave zircon U-Pb ages of 1774 +/- 26 Ma and 1721 +/- 25 Ma. These may be coeval with the Alto Terere metamorphic rocks of the northeastern corner, intruded in their turn by the Baia das Garcas granitic rocks, one of them yielding a zircon U-Pb age of 1754 +/- 49 Ma. The original magmatic protoliths of these rocks involved some crustal component, as indicated by the Sm-Nd TDm model ages, between 1.9 and 2.5 Ga. Regional Sr isotopic homogenization, associated with tectonic deformation and medium-grade metamorphism occurred at approximately 1670 Ma, as suggested by Rb-Sr whole rock reference isochrons. Finally, at 1300 Ma ago, the Ar work indicates that the Rio Apa Craton was affected by widespread regional heating, when the temperature probably exceeded 350 degrees C. Geographic distribution, age and isotopic signature of the fithotectonic units suggest the existence of a major suture separating two different tectonic domains, juxtaposed at about 1670 Ma. From that time on, the unified Rio Apa continental block behaved as one coherent and stable tectonic unit. It correlates well with the SW corner of the Amazonian Craton, where the medium-grade rocks of the Juruena-Rio Negro tectonic province, with ages between 1600 and 1780 Ma, were reworked at about 1300 Ma. Looking at the largest scale, the Rio Apa Craton is probably attached to the larger Amazonian Craton, and the actual configuration of southwestern South America is possibly due to a complex arrangement of allochthonous blocks such as the Arequipa, Antofalla and Pampia, with different sizes, that may have originated as disrupted parts of either Laurentia or Amazonia, and were trapped during later collisions of these continental masses.

Algorithms for two-dimensional cutting stock and strip packing problems using dynamic programming and column generation

We investigate several two-dimensional guillotine cutting stock problems and their variants in which orthogonal rotations are allowed. We first present two dynamic programming based algorithms for the Rectangular Knapsack (RK) problem and its variants in which the patterns must be staged. The first algorithm solves the recurrence formula proposed by Beasley; the second algorithm - for staged patterns - also uses a recurrence formula. We show that if the items are not so small compared to the dimensions of the bin, then these algorithms require polynomial time. Using these algorithms we solved all instances of the RK problem found at the OR-LIBRARY, including one for which no optimal solution was known. We also consider the Two-dimensional Cutting Stock problem. We present a column generation based algorithm for this problem that uses the first algorithm above mentioned to generate the columns. We propose two strategies to tackle the residual instances. We also investigate a variant of this problem where the bins have different sizes. At last, we study the Two-dimensional Strip Packing problem. We also present a column generation based algorithm for this problem that uses the second algorithm above mentioned where staged patterns are imposed. In this case we solve instances for two-, three- and four-staged patterns. We report on some computational experiments with the various algorithms we propose in this paper. The results indicate that these algorithms seem to be suitable for solving real-world instances. We give a detailed description (a pseudo-code) of all the algorithms presented here, so that the reader may easily implement these algorithms. (c) 2007 Elsevier B.V. All rights reserved.

Asymmetric Ramsey Properties of Random Graphs Involving Cliques

Consider the following problem: Forgiven graphs G and F(1),..., F(k), find a coloring of the edges of G with k colors such that G does not contain F; in color i. Rodl and Rucinski studied this problem for the random graph G,,, in the symmetric case when k is fixed and F(1) = ... = F(k) = F. They proved that such a coloring exists asymptotically almost surely (a.a.s.) provided that p <= bn(-beta) for some constants b = b(F,k) and beta = beta(F). This result is essentially best possible because for p >= Bn(-beta), where B = B(F, k) is a large constant, such an edge-coloring does not exist. Kohayakawa and Kreuter conjectured a threshold function n(-beta(F1,..., Fk)) for arbitrary F(1), ..., F(k). In this article we address the case when F(1),..., F(k) are cliques of different sizes and propose an algorithm that a.a.s. finds a valid k-edge-coloring of G(n,p) with p <= bn(-beta) for some constant b = b(F(1),..., F(k)), where beta = beta(F(1),..., F(k)) as conjectured. With a few exceptions, this algorithm also works in the general symmetric case. We also show that there exists a constant B = B(F,,..., Fk) such that for p >= Bn(-beta) the random graph G(n,p) a.a.s. does not have a valid k-edge-coloring provided the so-called KLR-conjecture holds. (C) 2008 Wiley Periodicals, Inc. Random Struct. Alg., 34, 419-453, 2009

Interactions between Bacteriophage DNA and Cationic Biomimetic Particles

The interaction between giant bacteriophage DNA and cationic biomimetic particles was characterized from sizing by dynamic light-scattering, zeta-potential analysis, turbidimetry, determination of colloid stability, visualization from atomic force microscopy (AFM), and determination of cytotoxicity against E. coli from colony forming unities counting. First, polystyrene sulfate (PSS) particles with different sizes were covered by a dioctadecyldimethylammonium bromide (DODAB) bilayer yielding the so-called cationic biomimetic particles (PSS/DODAB). These cationic particles are highly organized, present a narrow size distribution and were obtained over a range of particle sizes. Thereafter, upon adding lambda, T5 or T2-DNA to PSS/DODAB particles, supramolecular assemblies PSS/DODAB/DNA were obtained and characterized over a range of DNA concentrations and particle sizes (80-700 nm). Over the low DNA concentration range, PSS/DODAB/DNA assemblies were cationic, colloidally stable with moderate polydispersity and highly cytotoxic against E. coli. From DNA concentration corresponding to charge neutralization, neutral or anionic supramolecular assemblies PSS/DODAB/DNA exhibited low colloid stability, high polydispersity and moderate cytotoxicity. Some nucleosome mimetic assemblies were observed by AFM at charge neutralization (zeta-potential equal to zero).

Characterization of banana, sugarcane bagasse and sponge gourd fibers of Brazil

In recent times, increasing attention has been paid to the use of renewable resources particularly of plant origin keeping in view the ecological concerns, renewability and many governments passing laws for the use of such materials. On the other hand, despite abundant availability of lignocellulosic materials in Brazil, very few attempts have been made about their utilization, probably due to lack of sufficient structure/property data. Systematic studies to know their properties and morphology may bridge this gap while leading to value addition to these natural materials. Chemical composition, X-ray powder diffraction, and morphological studies and thermal behavior aspects in respect of banana, sugarcane bagasse sponge gourd fibers of Brazilian origin are presented. Chemical compositions of the three fibers are found to be different than those reported earlier. X-ray diffraction patterns of these three fibers exhibit mainly cellulose type I structure with the crystallinity indices of 39%, 48% and 50% respectively for these fibers. Morphological studies of the fibers revealed different sizes and arrangement of cells. Thermal stability of all the fibers is found to be around 200 degrees C. Decomposition of both cellulose and hemicelluloses in the fibers takes place at 300 degrees C and above, while the degradation of fibers takes place above 400 degrees C. These data may help finding new uses for these fibers. (C) 2009 Elsevier B.V. All rights reserved.

Kraftutveckling för manuella trädfällningsredskap : Force development for manual tree felling tools

The objective with this study has been to build general models of the mechanics in tree felling with chain-saw and to compare felling torque for different tools. The theoretical models are completed and validated with a comparative study. The study includes a great number of felling tools of which some are used with different methods. Felling torque was measured using a naturally like measuring arrangement where a tree is cut at about 3.7 m height and then anchored with a dynamometer to a tree opposite to the felling direction. Notch and felling cut was made as ordinary with exception that the hinge was made extra thin to reduce bending resistance. The tree was consequently not felled during the trials and several combinations of felling tools and individuals could be used on the same tree.The results show big differences between tools, methods and persons. The differences were, however, not general, but could vary depending on conditions (first of all tree diameters). Tools and methods that push or pull on the stem are little affected by the size of the tree, while tools that press on the stump are very much dependent of a large stump-diameter. Hand force asserted on a simple pole is consequently a powerful tool on small trees. For trees of medium size there are several alternative methods with different sizes and brands of felling levers and wedges. Larger and more ungainly tools and methods like tree pusher, winch, etc. develop very high felling torque on all tree sizes. On large trees also the felling wedge and especially the use of several wedges together develop very high felling torque.

How does data quality in a network affect heuristic solutions?

To have good data quality with high complexity is often seen to be important. Intuition says that the higher accuracy and complexity the data have the better the analytic solutions becomes if it is possible to handle the increasing computing time. However, for most of the practical computational problems, high complexity data means that computational times become too long or that heuristics used to solve the problem have difficulties to reach good solutions. This is even further stressed when the size of the combinatorial problem increases. Consequently, we often need a simplified data to deal with complex combinatorial problems. In this study we stress the question of how the complexity and accuracy in a network affect the quality of the heuristic solutions for different sizes of the combinatorial problem. We evaluate this question by applying the commonly used p-median model, which is used to find optimal locations in a network of p supply points that serve n demand points. To evaluate this, we vary both the accuracy (the number of nodes) of the network and the size of the combinatorial problem (p). The investigation is conducted by the means of a case study in a region in Sweden with an asymmetrically distributed population (15,000 weighted demand points), Dalecarlia. To locate 5 to 50 supply points we use the national transport administrations official road network (NVDB). The road network consists of 1.5 million nodes. To find the optimal location we start with 500 candidate nodes in the network and increase the number of candidate nodes in steps up to 67,000 (which is aggregated from the 1.5 million nodes). To find the optimal solution we use a simulated annealing algorithm with adaptive tuning of the temperature. The results show that there is a limited improvement in the optimal solutions when the accuracy in the road network increase and the combinatorial problem (low p) is simple. When the combinatorial problem is complex (large p) the improvements of increasing the accuracy in the road network are much larger. The results also show that choice of the best accuracy of the network depends on the complexity of the combinatorial (varying p) problem.

Papéis de marketing em um sistema de capital de distribuição: estudos de casos sobre diferentes composições organizacionais

Este projeto tem o objetivo de identificar os papéis de marketing existentes nos componentes da cadeia de distribuição de Tecnologia da Informação (TI), com ênfase na observação das atividades orientadas para melhoria do relacionamento da organização com o usuário corporativo e na consolidação da marca do integrante da cadeia, independente da tecnologia ou marca do fabricante representado. Este projeto centrou a observação em casos de representações no Brasil, embora um dos casos analisados atue multinacionalmente. Para manter certa homogeneidade na avaliação, foram escolhidos casos integrantes de um único canal de um fabricante de TI internacional. Estes casos foram selecionados por estarem inseridos num ambiente freqüentemente mutável e de alta competitividade. As empresas pesquisadas, que ocupam espaços específicos na cadeia de relacionamento do canal, diferenciam-se também no tamanho e na abrangência de mercado, considerando-se o tipo, a quantidade e a dispersão geográfica dos usuários. As observações efetuadas indicam que poucas atividades e papéis de marketing são comuns aos casos pesquisados. Além disto, foi identificado que o conjunto básico de atividades necessárias para um adequado relacionamento com o usuário final, embora contido em toda a cadeia ou sistema do canal, não está estruturado como um todo, ocorrendo eventualmente ineficiência de determinadas atividades e papéis de marketing ou superposição de outros.

O perfil da administração financeira das pequenas e médias empresas

Este trabalho aborda o uso da administração financeira nas pequenas e médias empresas. Procurou-se discutir as principais metodologias propostas nas referências bibliográficas sobre o tema, e verificar, através do resultado de uma pesquisa de campo, a realidade encontrada nas empresas. Através dessa, buscou-se investigar os conhecimentos aplicados em suas rotinas administrativas e as variações nos padrões gerenciais entre empresas de diferentes portes e setores de atuação, no que se refere à área pesquisada. O estudo contemplou os principais temas que envolvem a administração financeira, analisando as áreas da tesouraria, fluxo de caixa, demonstrações financeiras, análise de balanços, custos e análise de investimento. Foram também objetos desse estudo a atenção dispensada à contabilidade, a forma como as empresas avaliam sua administração e os fatores que influenciam na implementação de uma administração financeira adequada. Foi proposta ainda uma metodologia de atribuição de notas às empresas, que objetiva demonstrar o desempenho da administração financeira das empresas pesquisadas. As conclusões deste estudo demonstram as principais falhas encontradas na gestão financeira das pequenas e médias empresas. Na comparação por porte, as pequenas empresas apresentaram graves problemas em sua administração, com uma melhora significativa nas médias empresas. Os resultados comprovam que mesmos pequenas empresas podem ter uma administração financeira adequada; porém, apresentam um grande número de empresas ineficientes nessa área, principalmente nos setores do comércio e serviço. O estudo comprovou que as empresas pesquisadas - mesmo as de médio porte - podem melhorar sua gestão financeira, principalmente através da aplicação das metodologias de análise de balanços e de projeções financeiras.

Modelos de gestão da inovação: um estudo de casos em empresas brasileiras do setor petroquímico

A inovação consiste em desafio premente para inúmeras organizações, de diferentes portes e missões. Dada sua relevância para as organizações públicas e privadas, de portes variados, assim como para as economias locais, regionais, nacionais e internacionais, a gestão da inovação constitui o cerne deste estudo de casos múltiplos. A gestão da inovação e seu alinhamento com a estratégia organizacional pode representar um diferencial competitivo significativo. Através de uma visão sistêmica sobre a gestão da inovação, é possível que as organizações gerem benefícios e externalidades que poderão atender a diversos atores envolvidos e públicos interessados no processo, tais como colaboradores, parceiros de negócios, fornecedores, usuários, clientes e agências do governo. A partir desta perspectiva, a estratégia de inovação é considerada uma abordagem central no que diz respeito à estratégia empresarial. Nossa intenção na realização desta pesquisa é compreender a complexidade e o valor de processos de inovação em organizações e seus efeitos enquanto consequências de estratégias deliberadas e emergentes. Esta pesquisa propõe um modelo referencial a ser utilizado pelos gestores para o mapeamento de processos de variados graus de complexidade, com vistas a prestar suporte na gestão da inovação de produtos, processos e administrativa, de forma estruturada, com especial ênfase ao modelo do funil de inovação e sua interface com tecnologias de informação, assim como em processos organizacionais e interorganizacionais, que podem contemplar parcerias externas em inovação aberta. Foram desenvolvidos três estudos de caso, os quais formam a base deste modelo referencial. Todos os casos abrangem empresas do setor petroquímico brasileiro, sendo um caso de empresa de grande porte, a Braskem S.A., e dois casos de empresas de pequeno porte, respectivamente a Hausthene Poliuretanos Ltda. e a Prorevest Revestimentos de Poliuretanos e Peças Especiais Ltda. O modelo referencial proposto busca identificar as condições necessárias – os determinantes da inovação – que possibilitam a gestão da inovação em produtos, processos e em gestão, e seus possíveis resultados.

Resiliência - um estudo exploratório da percepção de gestores sobre o constructo, nas dimensões humana e organizacional

Afinal, o que os gestores entendem por resiliência? É o questionamento que pautou este estudo e para respondê-lo desenvolvemos uma pesquisa empírica com 17 gestores de empresas de diversos portes, aqui no Rio de Janeiro, por meio de entrevista semi-estruturada, realizada durante os meses de janeiro a junho de 2015. As respostas colhidas foram submetidas à Análise do Discurso posibilitando identificar na prática discursiva, figuras de linguagem, ethos do entrevistado, seleção lexical predominante, intertextualidade e temas de fundo, e relacioná-los aos elementos do corpus discursivo acadêmico, o que permitiu a constituição das categorias analíticas sobre: resiliência humana e resiliência organizacional. A análise concluiu que, para os gestores, embora o conceito de resiliência humana ainda seja influenciado pelos conceitos de elasticidade e invulnerabilidade, que informaram a construção do conceito de resiliência nos estudos iniciais no campo da Psicologia, a resiliência é um processo dinâmico cujo resultado é a adaptação bem sucedida e a transformação do indivíduo. A resiliência organizacional é personificada na resiliência dos indivíduos, especificamente, na dos gestores cujos comportamentos, individuais e coletivos, contribuem ou impedem a resiliência organizacional, com destaque para a revelação a respeito de como a resiliência influencia o processo de tomada de decisão, tanto por sua presença como por sua ausência. Este estudo é relevante na medida que suas revelações consubstanciam implicações para a academia e para as empresas. Para a academia a influência da resiliência no processo decisório sinaliza um denominador comum diante do qual as pesquisas acadêmicas podem partir, viabilizando a elaboração de proposições epistemológicas, metodológicas e praxiólogicas que ampliem, de forma realista, as possibilidades de acesso, por indivíduos e organizações, de um repertório de respostas produtivas às adversidades. Para as empresas as revelações deste estudo implicam em maior foco das iniciativas de desenvolvimento, tanto organizacional quanto de pessoas, no alinhamento de estrutura, processos e gestão de ativos intangíveis relacionados ao exercício da liderança, que resultem no delineamento de uma cultura organizacional favorável e compatível com um contexto viabilizador da resiliência organizacional.

Atividade β-D-N-Acetilglucosaminidásica de enzimas imobilizadas extraídas da Artemia franciscana e possíveis aplicações biotecnológicas

A β-D-N-acetilglucosaminidase extracted and partially isolated from crustacean Artemia franciscana by ammonium sulfate precipitation and filtration gel chromatography Bio Gel A 1.5m. the enzyme was immobilized on ferromagnetic Dacron yielding a insoluble active derivative with 5.0 units/mg protein and 10.35% of the soluble enzyme activity. β-D-N-acetilglucosaminidase-ferromagnetic Dacron was easily removed from the reaction mixture by a magnetic field, it was reused for ten times without loss in its activity. The ferromagnetic Dacron was better activated at pH 5.0. The particles visualized at scanning electron microscope (SEM) had presented different sizes, varying between 721nm and 100µm. Infra red confirmed immobilization on support, as showed by primary amino peaks at 1640 and 1560 cm-1 . The immobilize enzyme presented Km of 2.32 ± 0.48 mM and optimum temperature of 50°C. Bought presented the same thermal stable of the soluble enzyme and larger enzymatic activity at pH 5.5. β-D-N-acetilglucosaminidase-Dacron ferromagnético showed sensible for some íons as the silver (AgNO3), with loss of activity. The β-D-N acetilglucosaminidase activity for mercury chloride (HgCl2), whom is one of the most toxic substance joined in nature, it was presented activity already diminished at 0,01mM and lost total activity at 4mM, indicating sensitivity for this type of metal. β-D-N-acetilglucosaminidase-ferromagnetic Dacron showed degradative capacity on heparan sulfate, the enzyme still demonstrated degradative capacity on heparan sulphate, suggesting a possible application to produce fractions of this glycosaminoglycan

Respostas funcionais de diferentes tamanhos de Tilápia do Nilo; Oreochromis niloticus; predando zooplâncton

The Nile tilapia, Oreochromis niloticus, is an important omnivorous fish in the reservoirs of the semi-arid region of Brazil. Throughout its growth tilapia s feeding behavior changes from a visual predator of zooplankton to a filter-feeder, collecting suspended particulate matter, including planktonic organisms, through pumping. This feature results in different impacts of tilapia on plankton community as the fish grows. Aiming to quantify the functional response of different sizes of Nile tilapia on zooplankton experiments in microcosms scale in the laboratory and in mesocosm scale in the field were carried out. The data were fitted to four different models of functional response. The best fits were obtained for nonlinear models in laboratory experiments. While the experiments in mesocosms were the best settings for responses of type I (juvenile and adult tilapia) and type III (fry). The Manly's alpha index was used to evaluate the feeding selectivity of tilapia on the three main groups of the zooplankton in the experiments in mesocosms. The results show that: (i) rotifers were the preferred prey of fingerlings,(ii) copepods were rejected by fry and juvenile tilapia and (iii) adult fish fed non-selectively on copepods, cladocerans and rotifers. The functional response models obtained in this research can be applied to population models and help in modeling the dynamics of interactions between Nile tilapia and the planktonic communities in the reservoirs of the semi-arid