High-speed solid-rotor induction machine – calculation program

The aim of this thesis is to utilize the technology developed at LUT and to provide an easy tool for high-speed solid-rotor induction machine preliminary design. Computer aided design tool MathCAD has been chosen as the environment for realizing the calculation program. Four versions of the design program have been made depending on the motor rotor type. The first rotor type is an axially slitted solid-rotor with steel end rings. The next one is an axially slitted solid-rotor with copper end rings. The third machine type is a solid rotor with deep, rectangular copper bars and end rings (squirrel cage). And the last one is a solid-rotor with round copper bars and end rings (squirrel cage). Each type of rotor has its own specialties but a general thread of design is common. This paper follows the structure of the calculating program and explains some features and formulas. The attention is concentrated on the difference between laminated and solid-rotor machine design principles. There is no deep analysis of the calculation ways are presented. References for all solution methods appearing during the design procedure are given for more detailed studying. This thesis pays respect to the latest innovations in solid-rotor machines theory. Rotor ends’ analytical calculation follows the latest knowledge in this field. Correction factor for adjusting the rotor impedance is implemented. The purpose of the created design program is to calculate the preliminary dimensions of the machine according to initial data. Obtained results are not recommended for exact machine development. Further more detailed design should be done in a finite element method application. Hence, this thesis is a practical tool for the prior evaluating of the high-speed machine with different solid-rotor types parameters.

Caracterização molecular de DNA de Delta papillomavirus bovino (BPV1, 2 e 13) em sarcoides equinos

Resumo:Sarcoides são tumores fibroblásticos, considerados os tumores de pele mais comuns em pele de equinos e que raramente apresentam regressão espontânea. Papilomavírus bovino (BPV) tipos 1 e 2 são relacionados com a patogenia do sarcoide e, provavelmente, o BPV tipo 13 (BPV13), recentemente descrito, também pode estar associado com a formação dessa lesão. Neste estudo, 20 amostras de lesões cutâneas, sendo 12 constituídas por tecidos frescos e 8 amostras de tecido fixado em formalina e embebido em parafina, provenientes de 15 cavalos foram utilizadas para a identificação do DNA de BPV. A análise histopatológica (HE) confirmou todas as lesões como sarcoide. Para a amplificação do DNA de papilomavírus (PV) foram realizadas três reações de PCR. Como triagem, os primers IFNR2/IDNT2 foram utilizados para amplificar um fragmento da ORF L1 do PV. O segundo par de primersutilizado é complementar a sequência dos genes E5 e L2 de BPVs 1, 2 e 13. O terceiro par de primers(FAP59/FAP64) utilizado tem o gene L1 como alvo. A primeira e a segunda PCRs permitiram amplificar produtos em todas as amostras avaliadas. Entretanto, na terceira reação, na qual foram utilizados os primers FAP, foi possível amplificar produtos com tamanho molecular esperado somente nas amostras constituídas por tecidos frescos. O sequenciamento de nucleotídeos e as análises filogenéticas realizadas nos fragmentos E5L2 resultaram na identificação de BPV1, 2 e 13 em 14 (70%), 2 (10%) e em 4 (20%) amostras de sarcoides, respectivamente. As amostras de sarcoides de um dos animais continha somente o DNA de BPV1. Entretanto, nas amostras provenientes do segundo cavalo foi possível identificar o DNA de três tipos de Deltapapillomavirus bovino (BPV1, 2 e 13) em lesões distintas. Este estudo ratifica a presença do DNA de BPV1, 2 e 13 em lesões de sarcoides em equinos, além de identificar três tipos de BPVs em um mesmo animal e descrever pela primeira vez no Brasil a presença de BPV1 e 2 nesse tipo de lesão.

Accuracy of modelling and identification of malfunctions in rotor systems: experimental results

The accuracy of modelling of rotor systems composed of rotors, oil film bearings and a flexible foundation, is evaluated and discussed in this paper. The model validation of different models has been done by comparing experimental results with numerical results by means. The experimental data have been obtained with a fully instrumented four oil film bearing, two shafts test rig. The fault models are then used in the frame of a model based malfunction identification procedure, based on a least square fitting approach applied in the frequency domain. The capability of distinguishing different malfunctions has been investigated, even if they can create similar effects (such as unbalance, rotor bow, coupling misalignment and others) from shaft vibrations measured in correspondence of the bearings.

Effects of aluminum sulfate on delta-aminolevulinate dehydratase from kidney, brain, and liver of adult mice

The purpose of the present study was to investigate the in vitro and in vivo effects of aluminum sulfate on delta-aminolevulinic acid dehydratase (ALA-D) activity from the brain, liver and kidney of adult mice (Swiss albine). In vitro experiments showed that the aluminum sulfate concentration needed to inhibit the enzyme activity was 1.0-5.0 mM (N = 3) in brain, 4.0-5.0 mM (N = 3) in liver and 0.0-5.0 mM (N = 3) in kidney. The in vivo experiments were performed on three groups for one month: 1) control animals (N = 8); 2) animals treated with 1 g% (34 mM) sodium citrate (N = 8) and 3) animals treated with 1 g% (34 mM) sodium citrate plus 3.3 g% (49.5 mM) aluminum sulfate (N = 8). Exposure to aluminum sulfate in drinking water inhibited ALA-D activity in kidney (23.3 ± 3.7%, mean ± SEM, P<0.05 compared to control), but enhanced it in liver (31.2 ± 15.0%, mean ± SEM, P<0.05). The concentrations of aluminum in the brain, liver and kidney of adult mice were determined by graphite furnace atomic absorption spectrometry. The aluminum concentrations increased significantly in the liver (527 ± 3.9%, mean ± SEM, P<0.05) and kidney (283 ± 1.7%, mean ± SEM, P<0.05) but did not change in the brain of aluminum-exposed mice. One of the most important and striking observations was the increase in hepatic aluminum concentration in the mice treated only with 1 g% sodium citrate (34 mM) (217 ± 1.5%, mean ± SEM, P<0.05 compared to control). These results show that aluminum interferes with delta-aminolevulinate dehydratase activity in vitro and in vivo. The accumulation of this element was in the order: liver > kidney > brain. Furthermore, aluminum had only inhibitory properties in vitro, while in vivo it inhibited or stimulated the enzyme depending on the organ studied.

Effects of lead and/or zinc exposure during the second stage of rapid postnatal brain growth on delta-aminolevulinate dehydratase and negative geotaxis of suckling rats

Lead has been shown to produce cognitive and motor deficits in young rats that could be mediated, at least in part, by inhibition of the zinc-containing heme biosynthetic enzyme delta-aminolevulinate dehydratase (ALA-D). In the present study we investigated the effects of lead and/or zinc treatment during the second stage of rapid postnatal brain development on brain, kidney and blood ALA-D specific activity, as well as the negative geotaxis behavior of rats. Eight-day-old Wistar rats were injected intraperitoneally with saline, lead acetate (8 mg/kg) and/or zinc chloride (2 mg/kg) daily for five consecutive days. Twenty-four hours after treatment, ALA-D activity was determined in the absence and presence of DL-dithiothreitol (DTT). The negative geotaxis behavior was assessed in 9- to 13-day-old rats. Treatment with lead and/or zinc did not affect body, brain or kidney weights or brain- or kidney-to-body weight ratios of the animals. In spite of the absence of effect of any treatment on ALA-D specific activity in brain, kidney and blood, the reactivation index with DTT was higher in the groups treated with lead or lead + zinc than in the control group, in brain, kidney and blood (mean ± SEM; brain: 33.33 ± 4.34, 38.90 ± 8.24, 13.67 ± 3.41; kidney: 33.50 ± 2.97, 37.60 ± 2.67, 15.80 ± 2.66; blood: 63.95 ± 3.73, 56.43 ± 5.93, 31.07 ± 4.61, respectively, N = 9-11). The negative geotaxis response behavior was not affected by lead and/or zinc treatment. The results indicate that lead and/or zinc treatment during the second stage of rapid postnatal brain growth affected ALA-D, but zinc was not sufficient to protect the enzyme from the effects of lead in brain, kidney and blood.

Reaction of diphenyl diselenide with hydrogen peroxide and inhibition of delta-aminolevulinate dehydratase from rat liver and cucumber leaves

The interaction of the product of H2O2 and (PhSe)2 with delta-aminolevulinate dehydratase (delta-ALA-D) from mammals and plants was investigated. (PhSe)2 inhibited rat hepatic delta-ALA-D with an IC50 of 10 µM but not the enzyme from cucumber leaves. The reaction of (PhSe)2 with H2O2 for 1 h increased the inhibitory potency of the original compound and the IC50 for animal delta-ALA-D inhibition was decreased from 10 to 2 µM. delta-ALA-D from cucumber leaves was also inhibited by the products of reaction of (PhSe)2 with H2O2 with an IC50 of 4 µM. The major product of reaction of (PhSe)2 with H2O2 was identified as seleninic acid and produced an intermediate with a lambdamax at 265 nm after reaction with t-BuSH. These results suggest that the interaction of (PhSe)2 with mammal delta-ALA-D requires the presence of cysteinyl residues in close proximity. Two cysteine residues in spatial proximity have been recently described for the mammalian enzyme. Analysis of the primary structure of plant delta-ALA-D did not reveal an analogous site. In contrast to (PhSe)2, seleninic acid, as a result of the higher electrophilic nature of its selenium atom, may react with additional cysteinyl residue(s) in mammalian delta-ALA-D and also with cysteinyl residues from cucumber leaves located at a site distinct from that found at the B and A sites in mammals. Although the interaction of organochalcogens with H2O2 may have some antioxidant properties, the formation of seleninic acid as a product of this reaction may increase the toxicity of organic chalcogens such as (PhSe)2.

Numerical simulation of rotor-stator interaction and tip clearance flow in centrifugal compressors

The effect of the tip clearance and vaneless diffuser width on the stage performance and flow fields of a centrifugal compressor were studied numerically and results were compared to the experimental measurements. The diffuser width was changed by moving the shroud side of the diffuser axially and six tip clearances size from 0.5 to 3 mm were studied. Moreover, the effects of rotor-stator interaction on the diffuser and impeller flow fields and performance were studied. Also transient simulations were carried out in order to investigate the influence of the interaction on the impeller and diffuser performance parameters. It was seen that pinch could improve the performance and it help to get more uniform flow at exit and less back flow from diffuser to the impeller.

Analytic evaluation of three-phase short circuit demagnetization and hysteresis loss risk in rotor-surface-magnet Permanent-Magnet Synchronous Machines

Permanent magnet synchronous machines (PMSM) have become widely used in applications because of high efficiency compared to synchronous machines with exciting winding or to induction motors. This feature of PMSM is achieved through the using the permanent magnets (PM) as the main excitation source. The magnetic properties of the PM have significant influence on all the PMSM characteristics. Recent observations of the PM material properties when used in rotating machines revealed that in all PMSMs the magnets do not necessarily operate in the second quadrant of the demagnetization curve which makes the magnets prone to hysteresis losses. Moreover, still no good analytical approach has not been derived for the magnetic flux density distribution along the PM during the different short circuits faults. The main task of this thesis is to derive simple analytical tool which can predict magnetic flux density distribution along the rotor-surface mounted PM in two cases: during normal operating mode and in the worst moment of time from the PM’s point of view of the three phase symmetrical short circuit. The surface mounted PMSMs were selected because of their prevalence and relatively simple construction. The proposed model is based on the combination of two theories: the theory of the magnetic circuit and space vector theory. The comparison of the results in case of the normal operating mode obtained from finite element software with the results calculated with the proposed model shows good accuracy of model in the parts of the PM which are most of all prone to hysteresis losses. The comparison of the results for three phase symmetrical short circuit revealed significant inaccuracy of the proposed model compared with results from finite element software. The analysis of the inaccuracy reasons was provided. The impact on the model of the Carter factor theory and assumption that air have permeability of the PM were analyzed. The propositions for the further model development are presented.

Delta sleep instability in children with chronic arthritis

The objective of the present study was to evaluate the expression of a cyclic alternating pattern (CAP) in slow wave sleep (SWS) in children with the well-defined chronic syndrome juvenile idiopathic arthritis (JIA). Twelve patients (9-17 years of age), 7 girls, with JIA were compared to matched controls by age, pubertal stage and gender. After one night of habituation in the sleep laboratory, sleep measurements were obtained by standard polysomnography with conventional sleep scoring and additional CAP analyses. The sleep parameters of the JIA and control groups were similar for sleep efficiency (91.1 ± 6.7 vs 95.8 ± 4.0), sleep stage in minutes: stage 1 (16.8 ± 8.5 vs 17.8 ± 4.0), stage 2 (251.9 ± 41 vs 262.8 ± 38.1), stage 3 (17.0 ± 6.0 vs 15.1 ± 5.7), stage 4 (61.0 ± 21.7 vs 77.1 ± 20.4), and rapid eye movement sleep (82.0 ± 27.6 vs 99.0 ± 23.9), respectively. JIA patients presented nocturnal disrupted sleep, with an increase in short awakenings, but CAP analyses showed that sleep disruption was present even during SWS, showing an increase in the overall CAP rate (P < 0.01). Overall CAP rate during non-rapid eye movement sleep was significantly higher in pediatric patients who were in chronic pain. This is the first study of CAP in pediatric patients with chronic arthritis showing that CAP analyses can be a powerful tool for the investigation of disturbance of SWS in children, based on sleep EEG visual analysis.

Notch ligand Delta-like 1 promotes the metastasis of melanoma by enhancing tumor adhesion

Notch signaling plays a vital role in tumorigenicity and tumor progression by regulating proliferation, invasion, and the tumor microenvironment. Previous research by our group indicated that Notch ligand Delta-like 1 (Dll1) is involved in angiogenesis in melanoma, and we noticed that it took a longer time to trypsinize Dll1-expressing B16 melanoma cells than the control cells. In this article, we extended our study to investigate the effects of Dll1 on tumor cell adhesion and metastasis. Dll1 overexpression activated Notch signaling in B16 tumor cells and significantly enhanced the adhering capacity of B16 tumor cells both in vitro and in vivo. B16-Dll1 cells also had a higher metastatic potential than their counterpart in the mouse model of lung metastasis. Along with increased Dll1 expression, N-cadherin, but not E-cadherin, was upregulated in B16-Dll1 cells. These data suggested that Notch ligand Dll1 may enhance the adhesion and metastasis of melanoma cells by upregulation of N-cadherin.

Quality of 'Delta Valencia' orange grown in semiarid climate and stored under refrigeration after coating with wax

The effects of carnauba-based wax on the quality of 'Delta Valencia' orange produced in Ceará state, Brazil, were studied. The fruits were coated with carnauba-based wax and refrigerated (7 ± 2 ºC and 85 ± 2% R.H.) for 28 days. The quality attribute parameters assessed were weight loss, peel color (brightness, hue angle, and chromaticity), peel moisture, pH, soluble solids (SS), titratable acidity (TA), SS/TA ratio, ascorbic acid, total soluble sugars, reducing sugars, yellow flavonoids, and polyphenols. The results showed that 'Delta Valencia' oranges grown in the dry climate of Ceará state has excellent quality. The coated fruits lost mass at a lower rate than the the control fruits. No significant loss of soluble solids, titratable acidity, pH, and SS/TA ratio was observed, while ascorbic acid, soluble sugars, reducing sugars, yellow flavonoids, and polyphenols increased during storage in both the coated and control fruits. Carnauba-based wax coated fruits showed no signal of dehydration keeping their shiny green peel up to the end of the storage. The use of coating was crucial for the maintenance of visual quality by reducing mass loss, as well as keeping peel moisture.

Studies of rotor dynamics using a multibody simulation approach

The non-idealities in a rotor-bearing system may cause undesirable subcritical superharmonic resonances that occur when the rotating speed of the rotor is a fraction of the natural frequency of the system. These resonances arise partly from the non-idealities of the bearings. This study introduces a novel simulation approach that can be used to study the superharmonic vibrations of rotor-bearing systems. The superharmonic vibrations of complex rotor-bearing systems can be studied in an accurate manner by combining a detailed rotor and bearing model in a multibody simulation approach. The research looks at the theoretical background of multibody formulations that can be used in the dynamic analysis of flexible rotors. The multibody formulations currently in use are suitable for linear deformation analysis only. However, nonlinear formulation may arise in high-speed rotor dynamics applications due to the cenrrifugal stiffening effect. For this reason, finite element formulations that can describe nonlinear deformation are also introduced in this work. The description of the elastic forces in the absolute nodal coordinate formulation is studied and improved. A ball bearing model that includes localized and distributed defects is developed in this study. This bearing model could be used in rotor dynamics or multibody code as an interface elements between the rotor and the supporting structure. The model includes descriptions of the nonlinear Hertzian contact deformation and the elastohydrodynamic fluid film. The simulation approaches and models developed here are applied in the analysis of two example rotor-bearing systems. The first example is an electric motor supported by two ball bearings and the second is a roller test rig that consists of the tube roll of a paper machine supported by a hard-bearing-type balanceing machine. The simulation results are compared to the results available in literature as well as to those obtained by measuring the existing structure. In both practical examples, the comparison shows that the simulation model is capable of predicting the realistic responses of a rotor system. The simulation approaches developed in this work can be used in the analysis of the superharmonic vibrations of general rotor-bearing systems.

Active Magnetic Bearing System Identification Methods and Rotor Model Updating

Active magnetic bearing is a type of bearing which uses magnetic field to levitate the rotor. These bearings require continuous control of the currents in electromagnets and data from position of the rotor and the measured current from electromagnets. Because of this different identification methods can be implemented with no additional hardware. In this thesis the focus was to implement and test identification methods for active magnetic bearing system and to update the rotor model. Magnetic center calibration is a method used to locate the magnetic center of the rotor. Rotor model identification is an identification method used to identify the rotor model. Rotor model update is a method used to update the rotor model based on identification data. These methods were implemented and tested with a real machine where rotor was levitated with active magnetic bearings and the functionality of the methods was ensured. Methods were developed with further extension in mind and also with the possibility to apply them for different machines with ease.