Reflections on the legal framework for relations between cooperatives and subsidiaries.

In the light of Portuguese legal system, cooperative enterprises may include an enterprise carried out by a subsidiary, provided they conform to certain requirements. The aim of this paper is to reflect on the issue of the legal framework of the relationship between the cooperative and the subsidiary. There are several problems to be addressed in this paper: (i) How to qualify such a relationship since corresponding to mere investments made by the cooperative? Should it be classified as non-member cooperative transactions or as extraordinary activities? (ii) How to qualify such a relationship when related to the development of preparatory or complementary activities for the economic activity developed between the cooperative and its members? May we speak, in this situation, of a concept of “indirect mutuality”, as provided in other legal systems? (iii) How should we classify and what is the regime of the economic results from the activity developed by the subsidiary? We will conclude, advocating: (i) That the cooperative enterprise may include an enterprise carried out by a subsidiary if this is deemed necessary to satisfy the interests of the members; (ii) The inadmissibility of the concept of “indirect mutuality”; (iii) The inadequacy of qualifying the legal relationship between the cooperative partner (iv) The application, to the economic results coming from the activity developed by the subsidiary, of the regime provided for in the Portuguese Cooperative Code to the results from non-member cooperative transactions; (v) The economic results coming from the activity developed by the subsidiary cannot be appropriated by individual co-operators members, and so should be allocated to indivisible reserves.

Sol-gel biomimetic material designed to target CEA cancer biomarker

1st ASPIC International Congress

No Fate But What We Make: a Case of Full Recovery After Out-of-Hospital Cardiac Arrest

An 80 years old man suffered a cardiac arrest shortly after arrival to his local health department. Basic Life Support was started promptly and nine minutes later, on evaluation by an Advanced Life Support team, the victim was defibrillated with a 200J shock. When orotracheal intubation was attempted, masseter muscle contraction was noticed: on reevaluation, the victim had pulse and spontaneous breathing.Thirty minutes later, the patient had been transferred to an emergency department. As he complained of chest pain, the ECG showed a ST segment depression in leads V4 to V6 and laboratory tests showed cardiac troponine I slightly elevated. A coronary angiography was performed urgently: significant left main plus three vessel coronary artery disease was disclosed.Eighteen hours after the cardiac arrest, a quadruple coronary artery bypass grafting operation was undertaken. During surgery, a fresh thrombus was removed from the middle left anterior descendent artery. Post-operative course was uneventful and the patient was discharged seven days after the procedure. Twenty four months later, he remains asymptomatic.In this case, the immediate call for the Advanced Life Support team, prompt basic life support and the successful defibrillation, altogether, contributed for the full recovery. Furthermore, the swiftness in the detection and treatment of the acute reversible cause (myocardial ischemia in this case) was crucial for long-term prognosis.

Analysis of the Out-Of-Plane Seismic Behavior of Unreinforced Masonry: A Literature Review

Although the issue of the out-of-plane response of unreinforced masonry structures under earthquake excitation is well known with consensus among the research community, this issue is simultaneously one of the more complex and most neglected areas on the seismic assessment of existing buildings. Nonetheless, its characterization should be found on the solid knowledge of the phenomenon and on the complete understanding of methodologies currently used to describe it. Based on this assumption, this article presents a general framework on the issue of the out-of-plane performance of unreinforced masonry structures, beginning with a brief introduction to the topic, followed by a compact state of art in which the principal methodologies proposed to assess the out-of-plane behavior of unreinforced masonry structures are presented. Different analytical approaches are presented, namely force and displacement-based, complemented with the presentation of existing numerical tools for the purpose presented above. Moreover, the most relevant experimental campaigns carried out in order to reproduce the phenomenon are reviewed and briefly discussed.

A simplified four-branch model for the analytical study of the out-of-plane performance of regular stone URM walls

During the last years, several studies have been made aiming to assess the out-of-plane seismic response of unreinforced stone masonry structures. This fact led to the development of a wide variety of models and approaches, ranging from simple kinematic based analytical models up to complex numerical simulations. Nevertheless, for the sake of simplicity, the out-of-plane seismic response of a masonry wall pier may be obtained by means of a simple single-degree-of-freedom system while still providing good results. In fact, despite the assumptions associated with such a simple formulation, it is also true that the epistemic uncertainty inherent with the selection of appropriate input parameters in more complex models may render them truly ineffective. In this framework, this paper focuses on the study of the out-of-plane bending of unreinforced stone masonry walls (cantilevers) by proposing a simplified analytical approach based on the construction of a linearized four-branch model, which is used to characterize the linear and nonlinear response of such structural elements through an overturning moment-rotation relationship. The formulation of the four-branch model is presented and described in detail and the meaningful parameters used for its construction are obtained from a set of experimental laboratory tests performed on six full-scale unreinforced regular sacco stone masonry specimens. Moreover, a parametric analysis aiming to evaluate the effect of these parameters’ variation on the final configuration of the model is presented and critically discussed. Finally, the results obtained from the application of the developed four-branch model on real unreinforced regular sacco stone masonry walls are thoroughly analysed and the main conclusions obtained from its application are summarized.

Experimental characterization of the out-of-plane performance of regular stone masonry walls, including test setups and axial load influence

Stone masonry is one of the oldest and most worldwide used building techniques. Nevertheless, the structural response of masonry structures is complex and the effective knowledge about their mechanical behaviour is still limited. This fact is particularly notorious when dealing with the description of their out-of-plane behaviour under horizontal loadings, as is the case of the earthquake action. In this context, this paper describes an experimental program, conducted in laboratory environment, aiming at characterizing the out-of-plane behaviour of traditional unreinforced stone masonry walls. In the scope of this campaign, six full-scale sacco stone masonry specimens were fully characterised regarding their most important mechanic, geometric and dynamic features and were tested resorting to two different loading techniques under three distinct vertical pre-compression states; three of the specimens were subjected to an out-of-plane surface load by means of a system of airbags and the remaining were subjected to an out-of-plane horizontal line-load at the top. From the experiments it was possible to observe that both test setups were able to globally mobilize the out-of-plane response of the walls, which presented substantial displacement capacity, with ratios of ultimate displacement to the wall thickness ranging between 26 and 45 %, as well as good energy dissipation capacity. Finally, very interesting results were also obtained from a simple analytical model used herein to compute a set of experimental-based ratios, namely between the maximum stability displacement and the wall thickness for which a mean value of about 60 % was found.

Simulation of masonry out-of-plane failure modes by multi-body dynamics

The seismic assessment of the local failure modes in existing masonry buildings is currently based on the identification of the so-called local mechanisms, often associated with the out-of-plane wall behavior, whose stability is evaluated by static force-based approaches and, more recently, by some displacement-based proposals. Local mechanisms consist of kinematic chains of masonry portions, often regarded as rigid bodies, with geometric nonlinearity and concentrated nonlinearity in predefined contact regions (unilateral no-tension behavior, possible sliding with friction). In this work, the dynamic behavior of local mechanisms is simulated through multi-body dynamics, to obtain the nonlinear response with efficient time history analyses that directly take into account the characteristics of the ground motion. The amplification/filtering effects of the structure are considered within the input motion. The proposed approach is validated with experimental results of two full-scale shaking-table tests on stone masonry buildings: a sacco-stone masonry façade tested at Laboratório Nacional de Engenharia Civil and a two-storey double-leaf masonry building tested at European Centre for Training and Research in Earthquake Engineering (EUCENTRE).

A interacção oral na sala de aula como desafio ao professor de Língua Estrangeira

O presente relatório foi elaborado no âmbito do estágio de Prática Educativa I, II e III, do curso de 2.º ciclo do Mestrado em Ensino do Inglês e Francês ou Espanhol no Ensino Básico, da Escola Superior de Educação. Ao longo deste relatório reflicto sobre as minhas práticas, incidindo em dois aspectos basilares para a realização deste trabalho: o modo como se processam as estratégias que concorrem para que seja possível promover a interacção oral dos alunos em sala de aula, e consequente desenvolvimento da sua competência comunicativa em língua estrangeira; e a forma como planifiquei actividades assentes em recursos diversificados, nomeadamente, jogos, histórias, flashcards, vídeo, roleplay, canções e debate. De forma a documentar as minhas reflexões, faço uma análise a algumas planificações de aulas em que utilizei os recursos mencionados, incluindo algumas imagens ilustrativas desses momentos. Concluo o relatório tecendo algumas considerações finais sobre o percurso que tracei na qualidade de aluna deste mestrado e de futura professora, reflectindo sobre alguns aspectos que considero relevantes na construção da profissionalidade docente.

Tuberculosis among HIV-1-infected subjects in a tertiary out-patient service in São Paulo city, Brazil

TB is currently considered to be the most important infectious disease among HIV-1-infected subjects in developing countries, such as Brazil. A retrospective analysis of TB cases was performed, occurring from January 1995 to December 2010 in our cohort of 599 HIV positive patients. The primary outcome was the occurrence of active TB. Forty-one TB cases were diagnosed over this period of 16 years, among 599 HIV positive patients in an open cohort setting in the city of Sao Paulo, Brazil. All-time lowest mean CD4 T cell count at the time of TB diagnosis was 146 and 186 cells/mm³, respectively. The mean HIV viral load was 5.19 log10 copies/mL, and 59% of the patients were on HAART. TB incidence was 1.47 per 100 person-years, for a total follow-up time of 2775 person-years. The probability of surviving up to 10 years after diagnosis was 75% for TB patients as opposed to 96% for patients with other, non-TB opportunistic diseases (p = 0.03). TB can be considered a public health problem among people living with HIV in Brazil despite of the widespread use of antiretrovirals for the treatment of HIV infection/AIDS.

Melhoria e automação de linhas de montagem

Hoje em dia, e com os avanços tecnológicos a surgirem de forma constante, existem novas áreas que têm de ser consideradas com um foco importante por parte de todas as organizações, sendo uma delas a robótica industrial. Motivada em aumentar o seu output, as condições de trabalho para os seus colaboradores, bem como todas as condições de organização da logística interna, a Grohe Portugal, mais especificamente o departamento da montagem, achou relevante fazer um estudo de métodos e tempos, calculando os ganhos potenciais de aumento de output com introdução de robótica nas linhas dos cartuchos. Os objetivos principais seriam então, fazer uma restruturação de todo o layout dessas linhas, tendo como foco automatizar alguma(s) operação(ões), conseguindo assim uma melhoria significativa do output dessas linhas com o menor payback possível. Posto isto, esta dissertação pretende apresentar o trabalho desenvolvido junto da Grohe Portugal, que teve como objetivo fazer os estudos e a automatização de linhas de montagem de cartuchos, bem como melhorar algumas linhas de montagem tendo em conta fatores ergonómicos. Relativamente à automatização da linha dos cartuchos, foi importante estudar todos os seguintes aspetos:  utilização de unidades robóticas;  ergonomia;  ganhos de produtividade;  automatizar ou semi-automatizar operações;  simplificar processos de montagem;  simplificar setups;  solicitar orçamentos;  elaborar caderno de encargos. Para a realização deste projeto, o trabalho desenvolvido foi decomposto em várias etapas, entre as quais se destacam:  análise e estudo dos métodos e sequências de montagem;  levantamento de todos os componentes e operações de montagem até à obtenção do cartucho final;  estudo de tempos de todas essas operações de montagem;  caraterização de um novo layout para as linhas com a introdução de unidades robóticas, tanto quanto possível, mais adequadas;  elaboração de caderno de encargos para ser enviado a empresas, para estas poderem apresentar uma orçamentação, bem como indicar as unidades robóticas mais adequadas para as tarefas pretendidas;  automatização da linha dos cartuchos. Relativamente ao projeto de novas linhas de montagem tendo em conta fatores ergonómicos, de forma a melhorar os sistemas de abastecimento e as condições de trabalho por parte dos operadores, foram postos em prática diferentes passos, nomeadamente:  identificação de todos os processos de montagem realizados pelos operadores na linha a melhorar;  estudo e definição da disposição dos componentes na nova linha, bem como a sua forma de abastecimento;  projeto da nova linha de montagem em 3D com recurso ao software SolidWorks;  realização prática da linha, acompanhando e ajudando a equipa da ferramentaria. O balanço final do trabalho foi bastante positivo, tanto na automatização das linhas de montagem dos cartuchos, em que todo o seu estudo foi alcançado com sucesso, como no melhoramento ergonómico das linhas de montagem, tendo-se alcançado melhorias em alguns índices de qualidade, tempos de abastecimento, organização das linhas, e nas condições de iluminação, resultando essas melhorias numa avaliação positiva por parte dos colaboradores que nelas trabalham todos os dias.

Symmetry-out asymmetry-in: the role of DMRT2

Dissertation presented to obtain the PhD degree in Biology

Avaliação do ensaio de pull-out na estimativa da resistência à compressão do betão em idades jovens

Dissertação para obtenção do Grau de Mestre em Engenharia Civil – Perfil Estruturas

A way out of the crises for expatriates: The mediating role of psychological capital

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Fast screening for diagnostic of heart ischemic episodes

Dissertação para obtenção do Grau de Doutor em Química Sustentável