Estudo de propriedades físico-químicas de um novo cimento obturador endodôntico

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Reciclagem de resíduo a partir de cinzas de carvão mineral: produção de argamassas

Este trabalho tem como objetivo avaliar a possibilidade de aproveitamento do resíduo obtido a partir da combustão do carvão mineral em caldeiras de leito fluidizado, de uma refinaria de alumina no estado do Pará. Neste contexto, foi avaliada a incorporação de cinzas volantes, como pozolana, em substituição parcial do cimento na produção de argamassas. Para tanto, foram elaborados corpos de prova utilizando-se o cimento do tipo Portland CPII-E-32. As misturas foram definidas na proporção 4:1, ou seja, 4 partes de agregado (sílica) e 1 parte de aglomerante (cimento e cinza), com a inserção de cinza nos teores de 10, 20, 30, 40 e 50 em porcentagem com relação ao cimento, além da argamassa sem adição. Foram definidas duas relações água/aglomerante, 0,4 e 0,8. Após tempo de cura de 7 e 28 dias, foram feitos testes de resistência à compressão para análise de comportamento. Além disso, as argamassas com a relação água/aglomerante 0,8 foram sujeitas a análises complementares de Difração de Raios-X, Microscopia Eletrônica de Varredura, absorção de água, porosidade aparente e massa específica aparente, cujos resultados obtidos mostraram-se compatíveis quando comparados com os dados da literatura, demonstrando ser viável a aplicação das cinzas estudadas na indústria da construção civil.

Estudo de parâmetros físicoquímicos para a produção de argamassas utilizando resíduos industriais e da construção civil

As argamassas podem ser consideradas como a mistura de aglomerantes e agregados com água, possuindo capacidade de endurecimento e aderência. Como alternativa, é proposto produção de argamassas utilizando como agregado miúdo resíduos de construção civil (RCC), rico em silicoaluminatos, gerado nas obras de demolições e reformas, e cinza volante (CV) como material pozolânico, obtida a partir da combustão do carvão mineral em caldeiras de leitos fluidizados, em substituição parcial ao cimento Portland. Neste contexto, o resíduo de construção civil foi beneficiado e caracterizado pelas análises de espectrofotometria de raios- X e difração de raios-X, a cinza volante foi caracterizada pela análise granulométrica e espectrofotometria de raios-X. Para produção das argamassas formularam-se composições de RCC nas proporções de 95, 90, 85, 80, 75 e 70%; CV de 0, 5, 10, 15, 20 e 25% e 5% de cimento Portland CP II Z 32, sendo que em cada composição do traço de argamassa foi adicionado 0,8% em volume de água e para o ensaio reológico utilizou-se as mesmas proporções de resíduos (RCC e CV) com 35% em volume de água. Após a cura de 28 dias os corpos de prova foram submetidos a ensaios físicos de absorção, porosidade e massa específica aparente; ensaio mecânico de resistência à compressão e análise de difração de raios-X e microscopia eletrônica de varredura, cujos resultados obtidos mostraram-se ser viável a utilização da cinza volante e RCC na construção civil, na produção de argamassas.

Cimentos Portland aditivados com arenito zeolítico com propriedades pozolânicas

O uso adequado de pozolanas possibilita a produção de cimentos especiais, de menor custo de fabricação e de maior durabilidade que os correspondentes sem adição. O emprego dessas adições minerais possibilita ganhos significativos em termos de produtividade e uma extensão da vida útil dos equipamentos de produção e da própria jazida de calcário, também ajudando na diminuição de CO2 lançado na atmosfera. As zeólitas têm sido utilizadas como material pozolânico em misturas com "terras vulcânicas" e água nas construções desde o tempo do antigo Império Romano. Nos dias atuais, existem muitas discussões envolvendo reatividade pozolânica das zeólitas naturais na incorporação dos cimentos Portland. Na Região nordeste do Brasil, zeólitas sedimentares relacionadas a arenitos da Bacia do Parnaíba foram descobertas pelo Serviço Geológico do Brasil nos anos 2000. Estes arenitos são constituídos em sua maioria de quartzo, zeólitas naturais (estilbita) e argilominerais (esmectita). Estudos preliminares constataram que este arenito pode ser empregado como material pozolânico em sistemas a base de cimento Portland, desde que o material seja peneirado para remoção do quartzo e ativado termicamente, uma vez que a estilbita é uma zeólita de baixa atividade pozolânica. O objetivo geral desse trabalho foi determinar qual proporção de arenito zeolítico ativado termicamente proporciona melhores propriedades mineralógicas e mecânicas ao cimento Portland. No programa experimental empregou-se o arenito zeolítico passante na peneira 200# e calcinado à temperatura de 500ºC. A análise química das amostras foi realizada por espectroscopia de fluorescência de raios-x e a caracterização mineralógica por difração de raios-x e análise termogravimétrica e termodiferencial. O comportamento da hidratação dos cimentos foi avaliado através de calorimetria de condução, difratometria de raio-X e análises termodiferencial e termogravimétricas. Para avaliação da atividade pozolânica foi adotado um ensaio mecânico de resistência à compressão em argamassas cimento Portland (CP I -S) e areia, com percentuais de substituição de cimento por arenito de 10, 20 e 30%. Os resultados mostraram que o arenito zeolítico calcinado com a percentual de substituição de 10% proporcionou às argamassas melhor resultado tem termos de resistência à compressão simples, contudo estudos mais aprofundados de durabilidade e a idades mais avançadas podem indicar que teores mais elevados do arenito zeolítico podem também ser apropriados para a produção de concretos, principalmente em obras de infraestrutura como barragens, canais, entre outras.

Avaliação de propriedades físicas, químicas e biológicas de cimentos Portland associados a radiopacificadores micro e nanoparticulados

Pós-graduação em Odontologia - FOAR

Caracterização dos finos de areia de uma fundição e sua incorporação em argamassa de cimento

Pós-graduação em Engenharia Civil e Ambiental - FEB

Produção e caracterização físico-mecânica do compósito cimento-madeira com variação granulométrica dos resíduos lignocelulósicos

The need to reduce environmental damage and add value to waste causes more and more new alternatives appear to unite these two points. One of the main ways to achieve this in timber industries and the use of waste for making panels. This work was aimed at studying the influence of particle size and density in Eucalyptus mechanical compressive strength of cement composite wood. For this study was performed production and physico-mechanical characterization of specimens, using portland cement, water and waste eucalyptus. The methodology consists of a statistical study of the results obtained by calculating the density and axial compression tests and a subsequent comparison of these results with other studies. The results showed that there are significant differences in density and compressive strength when using different particle sizes the particles of eucalyptus. In general, the smaller the particle size, the lower the compression strength and the greater the density when the samples are produced with the same trait

Estudos exploratórios sobre propriedades térmicas do compósito cimento-polpa celulósica(CPC)

The search for a more aware use of available raw materials has led to a need to create more sustainable products. The use of natural fibers to reinforce cement, for instance, has been widely studied in the past decades because of the possibility that they can improve material properties such as thermal resistance and to compression, besides conferring a decrease in their total weight. This present study aimed at to conduct preliminary studies on the thermal resistance of the composite cement - Cellulose Pulp, using waste from the pulp and paper industry. Through experiments, it was found that the composite manufactured using the ratio 30 % Portland cement and 70 % pulp, showed satisfactory results regarding its thermal resistance, so it could be considered as a potential thermal insulation material, for use in constructions

Compressive strength and setting time of MTA and portland cement associated with different radiopacifying agents

The aim of this study was to evaluate the compressive strength and setting time of MTA and Portland cement (PC) associated with bismuth oxide (BO), zirconium oxide (ZO), calcium tungstate (CT), and strontium carbonate (SC). Methods. For the compressive strength test, specimens were evaluated in an EMIC DL 2000 apparatus at 0.5 mm/min speed. For evaluation of setting time, each material was analyzed using Gilmore-type needles. The statistical analysis was performed with ANOVA and the Tukey tests, at 5% significance. Results. After 24 hours, the highest values were found for PC and PC + ZO. At 21 days, PC + BO showed the lowest compressive strength among all the groups. The initial setting time was greater for PC. The final setting time was greater for PC and PC + CT, and MTA had the lowest among the evaluated materials (< 0.05). Conclusion. The results showed that all radiopacifying agents tested may potentially be used in association with PC to replace BO.

Ph and antimicrobial activity of portland cement associated with different radiopacifying agents

The aim of this study was to evaluate the antimicrobial activity and pH changes induced by Portland cement (PC) alone and in association with radiopacifiers. Methods. The materials tested were pure PC, PC + bismuth oxide, PC + zirconium oxide, PC + calcium tungstate, and zinc oxide and eugenol cement (ZOE). Antimicrobial activity was evaluated by agar diffusion test using the following strains: Micrococcus luteus, Streptococcus mutans, Enterococcus faecalis, Pseudomonas aeruginosa, and Candida albicans. After 24 hours of incubation at 37°C, inhibition of bacterial growth was observed and measured. For pH analysis, material samples (n=10) were placed in polyethylene tubes and immersed in 10 mL of distilled water. After 12, 24, 48, and 72 hours, the pH of the solutions was determined using a pH meter. Results. All microbial species were inhibited by the cements evaluated. All materials composed of PC with radiopacifying agents promoted pH increase similar to pure Portland cement. ZOE had the lowest pH values throughout all experimental periods. Conclusions. All Portland cement-based materials with the addition of different radiopacifiers (bismuth oxide, calcium tungstate, and zirconium oxide) presented antimicrobial activity and pH similar to pure Portland cement.

Biocompatibility and setting time of CPM-MTA and white Portland cement clinker with or without calcium sulfate

To evaluate the biocompatibility and the setting time of Portland cement clinker with or without 2% or 5% calcium sulfate and MTA-CPM. Twenty-four mice (Rattus norvegicus) received subcutaneously polyethylene tubes filled with Portland cement clinker with or without 2% or 5% calcium sulfate and MTA. After 15, 30 and 60 days of implantation, the animals were killed and specimens were prepared for microscopic analysis. For evaluation of the setting time, each material was analyzed using Gilmore needles weighing 113.5 g and 456.5 g, according to the ASTM specification Number C266-08 guideline. Data were analyzed by ANOVA and Tukey's test for setting time and Kruskal-Wallis and Dunn test for biocompatibility at 5% significance level. Histologic observation showed no statistically significant difference of biocompatibility (p>0.05) among the materials in the subcutaneous tissues. For the setting time, clinker without calcium sulfate showed the shortest initial and final setting times (6.18 s/21.48 s), followed by clinker with 2% calcium sulfate (9.22 s/25.33 s), clinker with 5% calcium sulfate (10.06 s/42.46 s) and MTA (15.01 s/42.46 s). All the tested materials showed biocompatibility and the calcium sulfate absence shortened the initial and final setting times of the white Portland cement clinker

Rat subcutaneous tissue response to MTA Fillapex® and Portland cement

The aim of this study was to evaluate the response of rat subcutaneous tissue to MTA Fillapex® (Angelus), an experimental root canal filling material based on Portland cement and propylene glycol (PCPG), and a zinc oxide, eugenol and iodoform (ZOEI) paste. These materials were placed in polyethylene tubes and implanted into the dorsal connective tissue of Wistar rats for 7 and 15 days. The specimens were stained with hematoxylin and eosin, and evaluated regarding inflammatory reaction parameters by optical microscopy. The intensity of inflammatory response against the sealers was analyzed by two blinded and previously calibrated examiners for all experimental periods (kappa=0.96). The histological evaluation showed that all materials caused a moderate inflammatory reaction at 7 days, which subsided with time. A greater inflammatory reaction was observed at 7 days in the tubes filled with ZOEI paste. Tubes filled with MTA Fillapex presented some giant cells, macrophages and lymphocytes after 7 days. At 15 days, the presence of fibroblasts and collagen fibers was observed indicating normal tissue healing. The tubes filled with PCPG showed similar results to those observed in MTA Fillapex. At 15 days, the inflammatory reaction was almost absent at the tissue, with several collagen fibers indicating normal tissue healing. Data were analyzed by the nonparametric Kruskal-Wallis test (?=0.05). Statistically significant difference (p<0.05) was found only between PCPG at 15 days and ZOEI at 7 days groups. No significant differences were observed among the other groups/periods (p>0.05). MTA Fillapex and Portland cement added with propylene glycol had greater tissue compatibility than the PCPG paste.

Aditivo polimérico derivado de fonte renovável para aplicação em cimento asfáltico de petróleo

This study evaluated the effects of incorporating an additive from an agro-industrial residue, after some chemical modification reactions, to petroleum asphalt cement (CAP) through the polymerization reaction of a viscous polyol obtained by bagasse biomass oxypropylation reaction sugarcane with anhydrides. The polyol is obtained by biomass oxypropylation reaction with propylene oxide, the reaction was performed in an autoclave sealed with pressure and temperature control using 25 mL of OP for every 5 grams of biomass 200°C, which time reaction was two hours. The reaction is revealed by varying the system pressure, initially at atmospheric pressure to reach a maximum pressure value and its subsequent return to atmospheric pressure. For the choice of the most suitable reaction time for polymerization of the polyol with pyromellitic anhydride, the reaction was also conducted in an autoclave sealed with temperature controller (150 ° C) using 20 g of polyol, 1 g of sodium acetate (catalyst) and 8 g of pyromellitic anhydride with the times 30 and 60 minutes. The polymerized materials with different times were characterized by determining the relative viscosity and percentage content of extractable in cyclohexane / ethanol. Given the results with the polymerized material 30 minutes showed the lowest percentage content of extractives and an increased viscosity relative indicating that this time is highlighted with respect to time 60 minutes, because the material is possibly in the form of a crosslinked polymer. Given the choice of time of 30 minutes other polymerization reactions were performed with various anhydrides and other conditions employed different proportions by mass of polyol anhydrides we were referred to as condition I (20 g anhydride and 8 g of polyol), II (20 g anhydride and 20 g of polyol) and III (8 g anhydride and 20 g of polyol). The FTIR spectra of polymeric materials with different polymerization conditions used to prove the occurrence of chemical modification due to the appearance of a characteristic band ester groups (1750 cm-1) present in the polymerized material. He chose to work with the condition III, as is the condition which employs a larger amount of polyol, and even with the smaller amount of anhydride used FTIR spectra revealed that the polymerization reaction was performed. Among the various anhydrides (phthalic, maleic and pyromellitic) of the different conditions used that stood out before the solubility test with solvents analyzed was polymerized material with pyromellitic anhydride because the polymerized material likely in the form of a crosslinked polymer because it was insoluble or poorly soluble in the solvents tested. Polymerization of the polyol with pyromellitic anhydride using condition III, that is, BCPP30, CSPP30, PCPP30 e BCPPG30, provided an increase in thermal stability relative to material in the form of polyol. Applicability tests concerning the incorporation of 16% m / m BCPP30, CSPP30, PCPP30 e BCPPG30 additive in relation to the mass of 600 g CAP showed through characterization tests used, softening point, elastic recovery and marshall dosage, it is possible to use BCPP30 as an additive the conventional CAP, because even with the incorporation of this new additive modified CAP met the specifications of the appropriate standard.

Formulação e caracterização de pastas espumadas por incorporação de ar e estabilizantes minerais

Cementing operations may occur at various stages of the life cycle of an oil well since its construction until its definitive abandonment. There are some situations in which the interest zones are depleted or have low fracture pressure. In such cases, the adoption of lowdensity cement slurries is an efficient solution. To this end, there are basically three ways to reduce the density of cement slurries: using microspheres, water extending additives or foamed cement. The objective of this study is to formulate, to study and to characterize lowdensity foamed cement, using an air entrainment surfactant with vermiculite or diatomite as water extenders and stabilizers. The methodology consists on preparation and evaluation of the slurries under the American Petroleum Institute (API) and the Brazilian Association of Technical Standards (ABNT) guidelines. Based on calculated densities between 13 and 15 ppg (1.559 and 1.799 g/cm3), the slurries were prepared with fixed surfactant concentration, varying the concentrations of vermiculite and diatomite and were compared with the base slurries. The results of plastic viscosity, yield point and gel strength and the compressive strength for 24 h showed that the slurries presented suitable rheology and mechanical strength for cementing operations in oil wells, and had their densities reduced between 8.40 and 11.89 ppg (1.007 and 1.426 g/cm3). The conclusion is that is possible, under atmospheric conditions, to obtain light weighted foamed cement slurries with satisfactory rheological and mechanical properties by means of air entrainment and mineral additions with extenders and stabilizers effects. The slurries have great potential for cementing operations; applicability in deep wells, in low fracture gradient formations and in depleted zones and bring cost savings by reducing the cementing consumption

Metodologia para avaliação de cinemática de partículas gasosas em fluidos de viscosidade variável com o tempo e sua aplicação na construção de poços de petróleo

Many challenges have been presented in petroleum industry. One of them is the preventing of fluids influx during drilling and cementing. Gas migration can occur as result of pressure imbalance inside the well when well pressure becomes lower than gas zone pressure and in cementing operation this occurs during cement slurry transition period (solid to fluid). In this work it was developed a methodology to evaluate gas migration during drilling and cementing operations. It was considered gel strength concept and through experimental tests determined gas migration initial time. A mechanistic model was developed to obtain equation that evaluates bubble displacement through the fluid while it gels. Being a time-dependant behavior, dynamic rheological measurements were made to evaluate viscosity along the time. For drilling fluids analyzed it was verified that it is desirable fast and non-progressive gelation in order to reduce gas migration without affect operational window (difference between pore and fracture pressure). For cement slurries analyzed, the most appropriate is that remains fluid for more time below critical gel strength, maintaining hydrostatic pressure above gas zone pressure, and after that gels quickly, reducing gas migration. The model developed simulates previously operational conditions and allow changes in operational and fluids design to obtain a safer condition for well construction