Alinhamento estratégico da TI: o caso da UFRN

It is considered that the Strategic Alignment IT is the first step within the IT Governance process for any institution. Taking as initial point the recognition that the governance corporate has an overall view of the organizations, the IT Governance takes place as a sub-set responsible for the implementation of the organization strategies in what concerns the provision of the necessary tools for the achievement of the goals set in the Institutional Development Plan. In order to do so, COBIT specifies that such Governance shall be built on the following principles: Strategic Alignment, Value Delivery, Risk Management, Performance Measurement. This paper aims at the Strategic Alignment, considered by the authors as the foundation for the development of the entire IT Governance core. By deepening the technical knowledge of the management system development, UFRN has made a decisive step towards the technical empowerment needed to the “Value Delivery”, yet, by perusing the primarily set processes to the “Strategic Alignment”, gaps that limited the IT strategic view in the implementation of the organizational goals were found. In the qualitative study that used documentary research with content analysis and interviews with the strategic and tactical managers, the view on the role of SINFO – Superintendência de Informática was mapped. The documentary research was done on public documents present on the institutional site and on TCU – Tribunal de Contas da União – documents that map the IT Governance profiles on the federal public service as a whole. As a means to obtain the documentary research results equalization, questionnaires/interviews and iGovTI indexes, quantitative tools to the standardization of the results were used, always bearing in mind the usage of the same scale elements present in the TCU analysis. This being said, similarly to what the TCU study through the IGovTI index provides, this paper advocates a particular index to the study area – SA (Strategic Alignment), calculated from the representative variables of the COBIT 4.1 domains and having the representative variables of the Strategic Alignment primary process as components. As a result, an intermediate index among the values in two adjacent surveys done by TCU in the years of 2010 and 2012 was found, which reflects the attitude and view of managers towards the IT governance: still linked to Data Processing in which a department performs its tasks according to the demand of the various departments or sectors, although there is a commission that discusses the issues related to infrastructure acquisition and systems development. With an Operational view rather than Strategic/Managerial and low attachment to the tools consecrated by the market, several processes are not contemplated in the framework COBIT defined set; this is mainly due to the inexistence of a formal strategic plan for IT; hence, the partial congruency between the organization goals and the IT goals.

Otimização do controle do diagrama de radiação de radares de varredura para rastreio de foguetes usando o método GAMMC para o Caso Planar (GAMMC-P)

Launching centers are designed for scientific and commercial activities with aerospace vehicles. Rockets Tracking Systems (RTS) are part of the infrastructure of these centers and they are responsible for collecting and processing the data trajectory of vehicles. Generally, Parabolic Reflector Radars (PRRs) are used in RTS. However, it is possible to use radars with antenna arrays, or Phased Arrays (PAs), so called Phased Arrays Radars (PARs). Thus, the excitation signal of each radiating element of the array can be adjusted to perform electronic control of the radiation pattern in order to improve functionality and maintenance of the system. Therefore, in the implementation and reuse projects of PARs, modeling is subject to various combinations of excitation signals, producing a complex optimization problem due to the large number of available solutions. In this case, it is possible to use offline optimization methods, such as Genetic Algorithms (GAs), to calculate the problem solutions, which are stored for online applications. Hence, the Genetic Algorithm with Maximum-Minimum Crossover (GAMMC) optimization method was used to develop the GAMMC-P algorithm that optimizes the modeling step of radiation pattern control from planar PAs. Compared with a conventional crossover GA, the GAMMC has a different approach from the conventional one, because it performs the crossover of the fittest individuals with the least fit individuals in order to enhance the genetic diversity. Thus, the GAMMC prevents premature convergence, increases population fitness and reduces the processing time. Therefore, the GAMMC-P uses a reconfigurable algorithm with multiple objectives, different coding and genetic operator MMC. The test results show that GAMMC-P reached the proposed requirements for different operating conditions of a planar RAV.

Escalonando uma aplicação paralela com demanda variável em ambiente de nuvem

This study proposes a solution responsible for scheduling data processing with variable demand in cloud environments. The system built check specific variables to the business context of a company incubated at Digital Metropole Institute of UFRN. Such a system generates an identification strategy machinery designs available in a cloud environment, focusing on processing performance, using data load balancing strategies and activities of parallelism in the software execution flow. The goal is to meet the seasonal demand within a standard time limit set by the company, controlling operating costs by using cloud services in the IaaS layer.

Relatório de Estágio na Inficon AG e na PT Inovação & Sistemas

This document focuses the projects developed during two independent internships, which were carried out at Inficon AG and PT Inovação & Sistemas. Since the research areas of both internships are unrelated, individual abstracts are presented.

Computação de alto desempenho aplicada a modelagem numérica de fenômenos atmosféricos

A constante evolução da tecnologia disponibilizou, atualmente, ferramentas computacionais que eram apenas expectativas há 10 anos atrás. O aumento do potencial computacional aplicado a modelos numéricos que simulam a atmosfera permitiu ampliar o estudo de fenômenos atmosféricos, através do uso de ferramentas de computação de alto desempenho. O trabalho propôs o desenvolvimento de algoritmos com base em arquiteturas SIMT e aplicação de técnicas de paralelismo com uso da ferramenta OpenACC para processamento de dados de previsão numérica do modelo Weather Research and Forecast. Esta proposta tem forte conotação interdisciplinar, buscando a interação entre as áreas de modelagem atmosférica e computação científica. Foram testadas a influência da computação do cálculo de microfísica de nuvens na degradação temporal do modelo. Como a entrada de dados para execução na GPU não era suficientemente grande, o tempo necessário para transferir dados da CPU para a GPU foi maior do que a execução da computação na CPU. Outro fator determinante foi a adição de código CUDA dentro de um contexto MPI, causando assim condições de disputa de recursos entre os processadores, mais uma vez degradando o tempo de execução. A proposta do uso de diretivas para aplicar computação de alto desempenho em uma estrutura CUDA parece muito promissora, mas ainda precisa ser utilizada com muita cautela a fim de produzir bons resultados. A construção de um híbrido MPI + CUDA foi testada, mas os resultados não foram conclusivos.

Operating infrastructure for an FPGA and ARM system

Advances in FPGA technology and higher processing capabilities requirements have pushed to the emerge of All Programmable Systems-on-Chip, which incorporate a hard designed processing system and a programmable logic that enable the development of specialized computer systems for a wide range of practical applications, including data and signal processing, high performance computing, embedded systems, among many others. To give place to an infrastructure that is capable of using the benefits of such a reconfigurable system, the main goal of the thesis is to implement an infrastructure composed of hardware, software and network resources, that incorporates the necessary services for the operation, management and interface of peripherals, that coompose the basic building blocks for the execution of applications. The project will be developed using a chip from the Zynq-7000 All Programmable Systems-on-Chip family.

Ordenação por translocação de genomas sem sinal utilizando algoritmos genéticos

Dissertação (mestrado)—Universidade de Brasília, Instituto de Ciências Exatas, Departamento de Ciência da Computação, Programa de Pós-Graducação em Informática, 2016.

Desenvolvimento e validação de metodologias para quantificação de 3,4 metilenodioximetanfetamina (MDMA) em comprimidos de ecstasy por cromatografia gasosa e ressonância magnética nuclear

Dissertação (mestrado)—Universidade de Brasília, Instituto de Química, 2016.

Implementation of an intelligent sensor for measurement and prediction of solar radiation and atmospheric temperature

Dissertação de mestrado, Engenharia Electrónica e Telecomunicações, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2011

Biomechanics of the trunk and lower limbs during gait in individuals with and without chronic low back pain

Combining information on kinetics and kinematics of the trunk during gait is important for both clinical and research purposes, since it can help in better understanding the mechanisms behind changes in movement patterns in chronic low back pain patients. Although three-dimensional gait analysis has been used to evaluate chronic low back pain and healthy individuals, the reliability and measurement error of this procedure have not been fully established. The main purpose of this thesis is to gain a better understanding about the differences in the biomechanics of the trunk and lower limbs during gait, in patients and healthy individuals. To achieve these aims, three studies were developed. The first two, adopted a prospective design and focused on the reliability and measurement error of gait analysis. In these test-retest studies, chronic low back pain and healthy individuals were submitted to a gait assessment protocol, with two distinct evaluation moments, separated by one week. Gait data was collected using a 13-camera opto-electronic system and three force platforms. Data analysis included the computation of time-distance parameters, as well as the peak values for lower limb and trunk joint angles/moments. The third study followed a cross sectional design, where gait in chronic low back pain individuals was compared with matched controls. Step-to-step variability of the thoracic, lumbar and hips was calculated, and step-to-step deviations of these segments from their average pattern (residual rotations) were correlated to each other. The reliability studies in this thesis show that three-dimensional gait analysis is a reliable and consistent procedure for both chronic low back pain and healthy individuals. The results suggest varied reliability indices for multi-segment trunk joint angles, joint moments and time-distance parameters during gait, together with an acceptable level of error (particularly regarding sagittal plane). Our findings also show altered stride-to-stride variability of lumbar and thoracic segments and lower trunk joint moments in patients. These kinematic and kinetic results lend support to the notion that chronic low back pain individuals exhibit a protective movement strategy.

Estudo Geoarqueológico de Georradar e Magnetometria no Povoado do Outeiro do Circo (Mombeja, Beja)

O presente trabalho tem como objecti- vo mostrar os resultados preliminares do estudo de prospecção geoarqueológica realizado no povoado do Outeiro do Circo. O trabalho consistiu no cruzamen- to de dois métodos de prospecção geofísica: georradar e magnetometria. Para concretizar o objectivo da missão realizaram-se ensaios dos dois métodos em áreas dis- tintas. O processamento dos dados registados permitiu identificar estruturas enterradas, interpretadas como vestígios da muralha que rodeava o povoado e de edifíci- os que terão existido no seu interior. Essas estruturas serão em breve confirmadas pelas escavações arque- ológicas em curso.

Avaliação da distribuição diamétrica de indivíduos arbóreos em uma área de manejo florestal comunitário localizada no município de Mojuí dos Campos, oeste paraense.

Para este estudo, realizou-se o inventário florestal amostral de seis lotes, em um total de 18 parcelas permanentes na Comunidade Santo Antônio, localizado a altura do km 124, município de Mojuí dos Campos-PA. Na área são praticadas atividades de manejo com a exploração florestal em parceria empresa-comunidade e a produção e comercialização de produtos florestais nãomadeireiros (PFNM). Após o procedimento experimental em campo, levantamento das informações e processamento dos dados foram realizadas inferências quantitativas para avaliar a estrutura diamétrica arbórea nos diferentes lotes amostrados. As árvores foram agrupadas em seis intervalos de classes diamétricas com amplitude de 10 cm. Constatou-se que a distribuição diamétrica da comunidade arbórea foi tipo exponencial negativa, que mais de 60% dos indivíduos está na primeira classe, para árvores menores de DAP <20 cm. Conclui-se que e ocorre alta similaridade na distribuição dos indivíduos nas classes diamétricas entre os lotes.

Pré-processamento no processo de descoberta de conhecimento em banco de dados

A Descoberta de Conhecimento em Banco de Dados (DCBD) é uma nova área de pesquisa que envolve o processo de extração de conhecimento útil implícito em grandes bases de dados. Existem várias metodologias para a realização de um processo de DCBD cuja essência consiste basicamente nas fases de entendimento do domínio do problema, pré-processamento, mineração de dados e pós-processamento. Na literatura sobre o assunto existem muitos trabalhos a respeito de mineração de dados, porém pouco se encontra sobre o processo de pré-processamento. Assim, o objetivo deste trabalho consiste no estudo do pré-processamento, já que é a fase que consome a maior parte do tempo e esforço de todo o processo de DCBD pois envolve operações de entendimento, seleção, limpeza e transformação de dados. Muitas vezes, essas operações precisam ser repetidas de modo a aprimorar a qualidade dos dados e, conseqüentemente, melhorar também a acurácia e eficiência do processo de mineração. A estrutura do trabalho abrange cinco capítulos. Inicialmente, apresenta-se a introdução e motivação para trabalho, juntamente com os objetivos e a metodologia utilizada. No segundo capítulo são abordadas metodologias para o processo de DCBD destacando-se CRISP-DM e a proposta por Fayyad, Piatetsky-Shapiro e Smyth. No terceiro capítulo são apresentadas as sub-fases da fase de pré-processamento contemplando-se entendimento, seleção, limpeza e transformação de dados, bem como os principais métodos e técnicas relacionados às mesmas. Já no quarto capítulo são descritos os experimentos realizados sobre uma base de dados real. Finalmente, no quinto capítulo são apresentadas as considerações finais sobre pré-processamento no processo de DCBD, apontando as dificuldades encontradas na prática, contribuições do presente trabalho e pretensões da continuidade do mesmo. Considera-se como principais contribuições deste trabalho a apresentação de métodos e técnicas de pré-processamento existentes, a comprovação da importância da interatividade com o especialista do domínio ao longo de todo o processo de DCBD, mas principalmente nas tomadas de decisões da fase de pré-processamento, bem como as sugestões de como realizar um pré-processamento sobre uma base de dados real.

Aquisição, processamento e análise de dados de sísmica de alta resolução na plataforma continental norte do Rio Grande do Norte: Vale inciso do rio açu

On the modern Continental Shelf to the north of Rio Grande do Norte state (NE Brazil) is located a paleo-valley, submerged during the last glacial sea-level lowstand, that marks continuation of the most important river of this area (Açu River). Despite the high level of exploration activity of oil industry, there is few information about shallow stratigraphy. Aiming to fill this gap, situated on the Neogene, was worked a marine seismic investigation, the development of a processing flow for high resolution data seismic, and the recognition of the main feature morphology of the study area: the incised valley of the River Açu. The acquisition of shallow seismic data was undertaken in conjunction with the laboratory of Marine Geology/Geophysics and Environmental Monitoring - GGEMMA of Federal University of Rio Grande do Norte UFRN, in SISPLAT project, where the geomorphological structure of the Rio paleovale Açu was the target of the investigation survey. The acquisition of geophysical data has been over the longitudinal and transverse sections, which were subsequently submitted to the processing, hitherto little-used and / or few addressed in the literature, which provided a much higher quality result with the raw data. Once proposed for the flow data was developed and applied to the data of X-Star (acoustic sensor), using available resources of the program ReflexW 4.5 A surface fluvial architecture has been constructed from the bathymetric data and remote sensing image fused and draped over Digital Elevation Models to create three-dimensional (3D) perspective views that are used to analyze the 3D geometry geological features and provide the mapping morphologically defined. The results are expressed in the analysis of seismic sections that extend over the region of the continental shelf and upper slope from mouth of the Açu River to the shelf edge, providing the identification / quantification of geometrical features such as depth, thickness, horizons and units seismic stratigraphyc area, with emphasis has been placed on the palaeoenvironmental interpretation of discordance limit and fill sediment of the incised valley, control by structural elements, and marked by the influence of changes in the sea level. The interpretation of the evolution of this river is worth can bring information to enable more precise descriptions and interpretations, which describes the palaeoenvironmental controls influencing incised valley evolution and preservation to provide a better comprehensive understanding of this reservoir analog system