Cyclodextrin Production by Bacillus lehensis Isolated from Cassava Starch: Characterisation of a Novel Enzyme

The properties of a previously unknown enzyme, denominated cyclodextrin glycosyltransferase, produced from Bacillus lehensis, were evaluated using affinity chromatography for protein purification. Enzyme characteristics (optimum pH and temperature; pH and temperature stability), the influence of substances on the enzyme activity, enzyme kinetics, and cyclodextrin production were analysed. Cyclodextrin glycosyltransferase was purified up to 320.74-fold by affinity chromatography using beta-cyclodextrin as the binder and it exhibited 8.71% activity recovery. This enzyme is a monomer with a molecular weight of 81.27 kDa, as estimated by SDS-PAGE. Optimum temperature and pH for cydodextrin glycosyltransferase were 55 degrees C and 8.0, respectively. The Michaelis-Menten constant was 8.62 g/l during maximum velocity of 0.858 g/l.h.

Behavior of Peruvian carrot (Arracacia xanthorrhiza) and cassava (Manihot esculenta) starches subjected to heat-moisture treatment

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Physical and mechanical characterization of a recycled polypropylene and wood flour without additives

Recycled polymer matrix composites reinforced with wood flour can be a viable alternative for the replacement of wood and virgin polymers in materials used in floors, door frames, windows and external cladding. The objective of this research was to determine some physical and mechanical parameters of composite made with Pinus taeda and elliottii wood flour (WF) and recycled polypropylene (PP), without the use of compatibilizers or additives. The composites were separated into four traits, namely 100% PP, 90% PP with 10%, WF 80% PP with 20% WF and 70 % PP with 30% WF. The characterization of the composite followed the standards ASTM D-638-10, ASTM D256-00, ASTM D570 -98, ASTM D1238 -10 and ASTM G 155-05, it was also employed the surface analysis by scanning electron microscopy. The dimensional stability tests showed satisfactory results. Even the composite with a higher percentage of wood flour (30%) had a flow index of 10 MFI, considered compatible with that observed for PP (polypropylene) virgin by standard ASTM D 1238-10. The inclusion of wood flour (FM) afforded composites with good mechanical characteristics which can be applied in manufacture of different materials, specifically employed outdoors.

Evaluation of the effect of supplementing fermented milk with quinoa flour on probiotic activity

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Propriedades físicas de snacks de farinha de folhas de mandioca

The food industry is continually growing with new products becoming available every year. Extrusion combines a number of unit operations in one energy efficient rapid continuous process and can be used to produce a wide variety of snacks foods. The objective of this study was to evaluate the effect of extrusion temperature, screw speed, and amount of cassava leaf flour mixed with cassava starch on the physical properties of extruded snacks processed using a single screw extruder. A central composite rotational design, including three factors with 20 treatments, was used in the experimental design. Dependent variables included the expansion index, specific volume, color, water absorption index, and water solubility index. Among the parameters examined, the amount of cassava leaf flour and extrusion temperature showed significant effects on extruded snack characteristics. Mixtures containing 10% of cassava leaf flour extruded at 100 degrees C and 255 rpm shows favorable levels of expansion, color, water absorption index, and water solubility index.

Produção de hidrolisado enzimático de farinha de batata-doce para fermentação etanólica

Recently there is a great quest of producing alcohol from starchy resources, replacing the sugar cane. The most common starchy sources are cassava, maize and sweet potatoes and a lot of research are been realized with excellent results. In this work it was evaluated the influence of the concentration of dry matter on the enzymatic hydrolysis process of starch from sweet potato for ethanol production. Through the sweet potato was produced a flour using a low-cost method and easy operation equipments. The sweet potato flour was characterized physical and chemically and from these results was prepared the treatments for enzymatic hydrolysis. The experimental design considered as independent variable the dry matter concentration of the sweet potato flour in 3 levels; 10, 15 and 20% in the formulation of suspensions. The other variables were keeping constant being: temperature in the 1° hydrolysis step of 90°C and time of 2 hours; temperature in the 2° saccharification step of 60°C and time of 17 hours. The hydrolysates obtained at the three assays were transferred to six liter enlerynmeyer and inoculated with a biologic catalyst, Saccharomyces, dehydrated yeasts of Saccharomyces cerevisiae CAT 1, at a rate of 5% in weight. The flasks were placed in a shaker type orbital with controlled temperature of 30°C during a time of 15 hours. The initial reducer sugars concentration and respective ethanol concentrations in wine were: 11.2% glucose and 2.16% ethanol in the suspension with 10% of dry matter; 13.5% glucose and 4.39% ethanol with 15% and 17.5% glucose and 6.03% ethanol in suspension with 20% of dry matter. ix The results showed that the higher percentage of dry matter carried out to higher sugar yield in hydrolyzed. It was possible observed that products quality improved with a higher concentration of dry matter

Cassava wastewater as carbon source for the polyhydroxybutyrate production by Azotobacter vinelandii CCT 2841

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Effect of ball milling on the physicochemical characteristics of Peruvian carrot and cassava starches

Peruvian carrot and cassava starches were ground in a ball mill for 4, 8, 16, and 32 h and their structural and physicochemical characteristics were determined. Results obtained from HPAEC-PAD, GPC, and amylose content indicated a breaking of hydrogen bounds and α-(1 [RIGHTWARDS ARROW] 6) linkages of the starch molecules after treatment. X-ray diffractograms showed that the milling provided a reduction in the crystalline area of the starch granules. Most of the starch granules displayed agglomeration after 4 h of milling, when observed under a scanning electron microscope, and after 16 h a shapeless mass was observed for Peruvian carrot starch. Solubility and water absorption capacity of the starches increased with an increase in the milling time, while RVA profiles showed a progressive reduction of peak, breakdown, and final viscosities, as well as the development of initial viscosity. Gelatinization temperatures and enthalpies were reduced. Prolonged ball milling accelerated the enthalpy relaxation in both starches. These results confirmed a partial gelatinization of the starches, which was 82.6% for Peruvian carrot and 65.4% for cassava starches after 32 h of milling. The Peruvian carrot starch was more affected by the ball milling because of both its lower amylose content and the defects in its crystalline structure

Behavior of Peruvian carrot (Arracacia xanthorrhiza) and cassava (Manihot esculenta) starches subjected to the heat-moisture treatment

Peruvian carrot and cassava starches were isolated, adjusted to 30 and 35% moisture, and heatedat 90°C for 8 h. Structural and physicochemical characteristics of the treated starches wereevaluated and compared. High performance anion exchange chromatography with pulsedamperometric detector (HPAEC-PAD), gel permeation chromatography (GPC), and amylosecontent, revealed that the HMT did not change the chemical structures of the starches. A largeagglomeration of granules was observed from SEM, particularly in the Peruvian carrot starch.Crystalline patterns in Peruvian carrot and cassava starches changed from B to C and CAto A,respectively. Relative crystallinity decreased from 30 to 25% in Peruvian Carrot starch, andincreased from 35 to 37% in cassava starch adjusted to 30% moisture. SF and peak viscositydecreased, breakdown was almost completely eliminated (particularly in the Peruvian carrotstarch), and final viscosity increased. WAI and WSI increased as moisture levels of bothstarches increased. Gelatinization temperatures increased and enthalpy decreased. Degrees ofgelatinization increased as the moisture level increased, reaching 33 and 72% in the cassavaand Peruvian carrot starches, respectively. HMT strengthened the intra- and intermolecularinteractions of starches and increased their stability during heating and shearing, but also causeda partial gelatinization in the starches, particularly in Peruvian carrot starch.

Fuzzy rule-based system for evaluation of uncertainty transaction in cassava chain

A fuzzy ruled-based system was developed in this study and resulted in an index indicating the level of uncertainty related to commercial transactions between cassava growers and their dealers. The fuzzy system was developed based on Transaction Cost Economics approach. The fuzzy system was developed from input variables regarding information sharing between grower and dealer on “Demand/purchase Forecasting”, “Production Forecasting” and “Production Innovation”. The output variable is the level of uncertainty regarding the transaction between seller and buyer agent, which may serve as a system for detecting inefficiencies. Evidences from 27 cassava growers registered in the Regional Development Offices of Tupa and Assis, São Paulo, Brazil, and 48 of their dealers supported the development of the system. The mathematical model indicated that 55% of the growers present a Very High level of uncertainty, 33% present Medium or High. The others present Low or Very Low level of uncertainty. From the model, simulations of external interferences can be implemented in order to improve the degree of uncertainty and, thus, lower transaction costs.

Thermoanalytical study of cassava starch native and treated with hydrogen peroxide

Starch is one of the most important sources of reserve of carbohydrate in plants and the main source in the human diet due to its abundance in the nature. There no other food ingredient that can be compared with starch in terms of sheer versatility of application in the food industry. Unprocessed native starches are structurally too weak and functionally too restricted for application in today’s advanced food and industrial technologies. The main objective of this study was to compare the thermal behavior of native cassava starch and those treated with hydrogen peroxide, as well as those treated with hydrogen peroxide and ferrous sulfate. The cassava starch was extracted from cassava roots (Manihot esculenta, Crantz) and treated by standardized hydrogen peroxide (H2 O2 ) solutions at 1, 2 and 3% (with or without FeSO4 ). Investigated by using they are thermoanalytical techniques: thermogravimetry - TG, differential thermal analysis – DTA and differential scanning calorimetry - DSC, as well as optical microscopy and X-ray powder diffractometry. The results showed the steps of thermal decomposition, changes in temperatures and in gelatinization enthalpy and small changes in crystallinity of the granules.

Cassava root husks as a sorbent material for the uptake and pre-concentration of cadmium(II) from aqueous media

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Consumption Diagnosis of Sweet Cassava in three Municipalities in Cuba

Cassava is an important staple food for human and animal feeding in Cuba. Despite its importance, there is little or nonexistent information to diagnose preferences and frequency of consumption of cassava in that country. In this sense, the present article characterizes the preferences and frequency of consumption of cassava in the municipalities of Plaza de la Revolución-La Habana province, El Salvador–Guantanamo province and San José de Las Lajas–Mayabeque province in Cuba. A survey was conducted through a questionnaire containing twelve closed and two open questions. The sample was determined based on the number of total population of each municipality considering 95% as confidence interval and 5% as error margin. The results were statistically analyzed by calculating the absolute and the relative frequencies of each question. It was observed that the acquisition of cassava in the municipalities of Plaza de la Revolución, El Salvador and San José de las Lajas in Cuba is done by purchase small quantities of fresh cassava for home consumption within one week, due to the extreme perishability of cassava, which limits consumers' ability to store fresh roots at home. The choice of cassava is made based on both skin colour (light brown) and pulp (white) and empirical knowledge about its ease of cooking, and that cassava is mostly consumed in boiled and fried forms up to four times a week in times where there is root market supply with the desirable culinary characteristics (cooking facility), that is, from September to December.

Pruning management of cassava for animal feeding: parameters of the root

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Starch accumulation in cassava roots: spatial and temporal distribution

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)