Archaean crustal evolution in eastern Finland : New geochronological and geochemical constraints from the Kuhmo terrain and the Nurmes belt

This thesis summarises the results of four original papers concerning U-Pb geochronology and geochemical evolution of Archaean rocks from the Kuhmo terrain and the Nurmes belt, eastern Finland. The study area belongs to a typical Archaean granite-greenstone terrain, composed of metavolcanic and metasedimentary rocks in generally N-S trending greenstone belts as well as a granitoid-gneiss complex with intervening gneissic and migmatised supracrustal and plutonic rocks. U-Pb data on migmatite mesosomes indicate that the crust surrounding the Tipasjärvi-Kuhmo-Suomussalmi greenstone belt is of varying age. The oldest protolith detected for a migmatite mesosome from the granitoid-gneiss complex is 2.94 Ga, whereas the other dated migmatites protoliths have ages of 2.84 2.79 Ga. The latter protoliths are syngenetic with the majority of volcanic rocks in the adjacent Tipasjärvi-Kuhmo-Suomussalmi greenstone belt. This suggests that the genesis of some of the volcanic rocks within the greenstone belt and surrounding migmatite protoliths could be linked. Metamorphic zircon overgrowths with ages of 2.84 2.81 Ga were also obtained. The non-migmatised plutonic rocks in the Kuhmo terrain and in the Nurmes belt record secular geochemical evolution, typical of Archaean cratons. The studied tonalitic rocks have ages of 2.83 2.75 Ga and they have geochemical characteristics similar to low-Al and high-Al TTD (tonalite-trondhjemite-dacite). The granodiorites, diorites, and gabbros with high Mg/Fe and LILE-enriched characteristics were mostly emplaced between 2.74 2.70 Ga and they exhibit geochemical characteristics typical of Archaean sanukitoid suites. The latest identified plutonic episode took place at 2.70 2.68 Ga, when compositionally heterogeneous leucocratic granitoid rocks, with a variable crustal component, were emplaced. U-Pb data on migmatite leucosomes suggest that leucosome generation may have been coeval with this latest plutonic event. On the basis of available U-Pb and Sm-Nd isotopic data it appears that the plutonic rocks of the Kuhmo terrain and the Nurmes belt do not contain any significant input from Palaeoarchaean sources. A characteristic feature of the Nurmes belt is the presence of migmatised paragneisses, locally preserving primary edimentary structures, with sporadic amphibolite intercalations. U-Pb studies on zircons indicate that the precursors of the Nurmes paragneisses were graywackes that were deposited between 2.71 Ga and 2.69 Ga and that they had a prominent 2.75 2.70 Ga source. Nd isotopic and whole-rock geochemical data for the intercalated amphibolites imply MORB sources. U-Pb data on zircons from the plutonic rocks and paragneisses reveal that metamorphic zircon growth took place at 2.72 2.63 Ga. This was the last tectonothermal event related to cratonisation of the Archaean crust of eastern Finland.

The evolution of entrepreneurial learning

- Purpose The purpose of this paper is to present an evolutionary perspective on entrepreneurial learning, whilst also accounting for fundamental ecological processes, by focusing on the development of key recurring, knowledge components within nascent and growing small businesses. - Design/methodology/approach The paper relates key developments within the organizational evolution literature to research on entrepreneurial learning, with arguments presented in favor of adopting a multi‐level co‐evolutionary perspective that captures and explains hidden ecological process, such as niche‐construction. - Findings It is argued in the paper that such a multi‐level focus on key recurring knowledge components can shed new light on the process of entrepreneurial learning and lead to the cross‐fertilization of ideas across different domains of study, by offering researchers the opportunity to use the framework of variation‐selection‐retention to develop a multi‐level representation of organizational and entrepreneurial learning. - Originality/value Entrepreneurial learning viewed in this way, as a multi‐level struggle for survival amongst competing knowledge components, can provide entrepreneurs with a set of evolutionary heuristics as they re‐interpret their understanding of the evolution of their business.

Creating the reasonable adventurer: The co-evolution of student and learning environment

Purpose: This paper seeks to address the issue of how are graduate skills developed. The focus is not on which skills, but rather what type of learning environments is required within Higher Education to support the development of skills valued and demanded by SMEs within Australia. Approach: This paper takes a step back to consider the underlying issue of how an individual student's habits of thought are altered. In doing so, the past works of Morgan, Dewey, Whitehead, and Tyler are synthesized with the modern work of Baxter Magolda, Heath, and Biggs. Findings: It is argued that that without the development of a student-centred learning environment, most graduates will not develop the types of skills demanded by SMEs in a meaningfully way. That the failure to treat knowledge and skills as equal drivers of curriculum design will result in an imbalance that relegates skill development to a secondary learning outcome. Practical Implications: By removing the distraction of what skills should be developed, a clearer focus is possible regarding how educators should assist students to develop a broad array of generic graduate skills. From this perspective, skills can be viewed as an essential element of the educational process, rather than a new element that must be squeezed in between content. Value of Paper: This paper extends recent discussion of skills development through the use of an evolutionary perspective. Viewed as a process of creating social change, education becomes increasingly connected to a world that lays beyond institutional boundaries, thus promoting the notion of developing graduates for the world that awaits them.

From Francovich to Köbler and beyond : The evolution of a State liability regime for the EC

The aim of this paper is to present the evolution of the Francovich doctrine within the European legal order. The first part deals with the gradual development of the ECJ's case law on State liability in damages for breach of EC law. Starting from the seminal Francovich and Brasserie du Pêcheur, the clarification of the criteria set by the Court is attempted with reference to subsequent case law, whereas issues concerning the extent and form of the compensation owned are also mentioned. The second part concerns one of the more recent developments in the field, namely State liability for breaches of Community law attributed to national judiciary. The Court's ruling in Köbler is examined in connection with two other recent judgments, namely Commission v. Italy of 2003 and Kühne & Heitz, as an attempt of the ECJ to reframe its relationships with national supreme courts and appropriate for itself the position of the Supreme Court in the European legal order. The implications on State liability claims by the ruling in Commission v. France of 1997 constitute the theme of the third part, where it is submitted that Member States can also be held liable for disregard of Community law by private individuals within their respected territories. To this extent, Schmidberger is viewed as a manifestation of this opinion, with fundamental rights acquiring a new dimension, being invoked by the States, contra the individuals as a shield to liability claims. Finally, the third part examines the relationship between the Francovich doctrine and the principle of legal certainty and concludes that the solutions employed by the ECJ have been both predictable and acceptable by the national legal orders. Keywords: State liability, damages, Francovich, Köbler, Schmidberger

Evolution of Social Behavior Through Interpopulation Selection

Under certain special conditions natural selection can be effective at the level of local populations, or demes. Such interpopulation selection will favor genotypes that reduce the probability of extinction of their parent population even at the cost of a lowered inclusive fitness. Such genotypes may be characterized by altruistic traits only in a viscous population, i.e., in a population in which neighbors tend to be closely related. In a non-viscous population the interpopulation selection will instead favor spiteful traits when the populations are susceptible to extinction through the overutilization of the habitat, and cooperative traits when it is the newly established populations that are in the greatest danger of extinction.

Elite Bargaining and the Evolution of Centre-Periphery Relations in Post-Soviet Russia : A Comparative Analysis

This work is concerned with presenting a modified theoretical approach to the study of centre-periphery relations in the Russian Federation. In the widely accepted scientific discourse, the Russian federal system under the Yeltsin Administration (1991-2000) was asymmetrical; largely owing to the varying amount of structural autonomy distributed among the federation s 89 constituent units. While providing an improved understanding as to which political and socio-economic structures contributed to federal asymmetry, it is felt that associated large N-studies have underemphasised the role played by actor agency in re-shaping Russian federal institutions. It is the main task of this thesis to reintroduce /re-emphasise the importance of actor agency as a major contributing element of institutional change in the Russian federal system. By focusing on the strategic agency of regional elites simultaneously within regional and federal contexts, the thesis adopts the position that political, ethnic and socio-economic structural factors alone cannot fully determine the extent to which regional leaders were successful in their pursuit of economic and political pay-offs from the institutionally weakened federal centre. Furthermore, this work hypothesises that under conditions of federal institutional uncertainty, it is the ability of regional leaders to simultaneously interpret various mutable structural conditions then translate them into plausible strategies which accounts for the regions ability to extract variable amounts of economic and political pay-offs from the Russian federal system. The thesis finds that while the hypothesis is accurate in its theoretical assumptions, several key conclusions provide paths for further inquiry posed by the initial research question. First, without reliable information or stable institutions to guide their actions, both regional and federal elites were forced into ad-hoc decision-making in order to maintain their core strategic focus: political survival. Second, instead of attributing asymmetry to either actor agency or structural factors exclusively, the empirical data shows that both agency and structures interact symbiotically in the strategic formulation process, thus accounting for the sub-optimal nature of several of the actions taken in the adopted cases. Third, as actor agency and structural factors mutate over time, so, too do the perceived payoffs from elite competition. In the case of the Russian federal system, the stronger the federal centre became, the less likely it was that regional leaders could extract the high degree of economic and political pay-offs that they clamoured for earlier in the Yeltsin period. Finally, traditional approaches to the study of federal systems which focus on institutions as measures of federalism are not fully applicable in the Russian case precisely because the institutions themselves were a secondary point of contention between competing elites. Institutional equilibriums between the regions and Moscow were struck only when highly personalised elite preferences were satisfied. Therefore the Russian federal system is the product of short-term, institutional solutions suited to elite survival strategies developed under conditions of economic, political and social uncertainty.

Kinetics of hydrogen evolution on a stainless steel electrode

The kinetic parameters for the hydrogen evolution reaction on a stainless steel substrate have been obtained from a study of the steady-state polarization curves as well as the galvanostatic transients. The high Tafel slope obtained in the steady-state polarization measurements was ascribed to the presence of an oxide film present on the surface of the stainless steel electrode.

Evolution of Grain-Boundary Microstructure and Texture in Interstitial-Free Steel Processed by Equal-Channel Angular Extrusion

The equal-channel angular extrusion (ECAE) of Ti-bearing interstitial-free (IF) steel was performed following two different routes, up to four passes, at a temperature of 300 degrees C. The ECAE led to a grain refinement to submicron size. After the second pass, the grain size attained saturation thereafter. The microstructural analysis indicated the presence of coincident-site lattice (CSL) boundaries in significant fraction, in addition to a high volume fraction of high-angle random boundaries and some low-angle boundaries after the deformation. Among the special boundaries, Sigma 3 and Sigma 13 were the most prominent ones and their fraction depended on the processing route followed. A deviation in the misorientation angle distribution from the Mackenzie distribution was noticed. The crystallographic texture after the first pass resembled that of simple shear, with the {112}, {110}, and {123} aligned to the macroscopic shear plane.

trans gene regulation in adaptive evolution: A genetic algorithm model

This is a continuation of earlier studies on the evolution of infinite populations of haploid genotypes within a genetic algorithm framework. We had previously explored the evolutionary consequences of the existence of indeterminate—“plastic”—loci, where a plastic locus had a finite probability in each generation of functioning (being switched “on”) or not functioning (being switched “off”). The relative probabilities of the two outcomes were assigned on a stochastic basis. The present paper examines what happens when the transition probabilities are biased by the presence of regulatory genes. We find that under certain conditions regulatory genes can improve the adaptation of the population and speed up the rate of evolution (on occasion at the cost of lowering the degree of adaptation). Also, the existence of regulatory loci potentiates selection in favour of plasticity. There is a synergistic effect of regulatory genes on plastic alleles: the frequency of such alleles increases when regulatory loci are present. Thus, phenotypic selection alone can be a potentiating factor in a favour of better adaptation.

Effects of mould filling on evolution of the solid-liquid interface during solidification

This work presents a numerical analysis of simultaneous mould filling and phase change for solidification in a two-dimensional rectangular cavity. The role of residual flow strength and temperature gradients within the solidifying domain, caused by the filling process, on the evolution of solidification interface are investigated. An implicit volume of fluid (VOF)-based algorithm has been employed for simulating the free surface flows during the filling process, while the model for solidification is based on a fixed-grid enthalpy-based control volume approach. Solidification modeling is coupled with VOF through User Defined Functions developed in the commercial computational fluid dynamics (CFD) code FLUENT 6.3.26. Comparison between results of the conventional analysis without filling effect and those of the present analysis shows that the residual flow resulting from the filling process significantly influences the progress of the solidification interface. A parametric study is also performed with variables such as cooling rate, filling velocity and filling configuration, in order to investigate the coupled effects of the buoyancy-driven flow and the residual flow on the solidification behavior.

Analysis of microstructure and texture evolution in pure magnesium during symmetric and asymmetric rolling

Asymmetric rolling of commercially pure magnesium was carried out at three different temperatures: room temperature, 200 degrees C and 350 degrees C. Systematic analysis of microstructures, grain size distributions, texture and misorientation distributions were performed using electron backscattered diffraction in a field emission gun scanning electron microscope. The results were compared with conventional (symmetric) rolling carried out under the same conditions of temperature and strain rate. Simulations of deformation texture evolution were performed using the viscoplastic self-consistent polycrystal plasticity model. The main trends of texture evolution are faithfully reproduced by the simulations for the tests at room temperature. The deviations that appear for the textures obtained at high temperature can be explained by the occurrence of dynamic recrystallization. Finally, the mechanisms of texture evolution in magnesium during asymmetric and symmetric rolling are explained with the help of ideal orientations, grain velocity fields and divergence maps displayed in orientation space.