Comparison of low-power wireless communication technologies for wearable health-monitoring applications

Health monitoring technologies such as Body Area Network (BAN) systems has gathered a lot of attention during the past few years. Largely encouraged by the rapid increase in the cost of healthcare services and driven by the latest technological advances in Micro-Electro-Mechanical Systems (MEMS) and wireless communications. BAN technology comprises of a network of body worn or implanted sensors that continuously capture and measure the vital parameters such as heart rate, blood pressure, glucose levels and movement. The collected data must be transferred to a local base station in order to be further processed. Thus, wireless connectivity plays a vital role in such systems. However, wireless connectivity comes at a cost of increased power usage, mainly due to the high energy consumption during data transmission. Unfortunately, battery-operated devices are unable to operate for ultra-long duration of time and are expected to be recharged or replaced once they run out of energy. This is not a simple task especially in the case of implanted devices such as pacemakers. Therefore, prolonging the network lifetime in BAN systems is one of the greatest challenges. In order to achieve this goal, BAN systems take advantage of low-power in-body and on-body/off-body wireless communication technologies. This paper compares some of the existing and emerging low-power communication protocols that can potentially be employed to support the rapid development and deployment of BAN systems.

A Gradient-Type Method For Real-Time State Estimation Of Water Distribution Networks

Drinking water distribution networks risk exposure to malicious or accidental contamination. Several levels of responses are conceivable. One of them consists to install a sensor network to monitor the system on real time. Once a contamination has been detected, this is also important to take appropriate counter-measures. In the SMaRT-OnlineWDN project, this relies on modeling to predict both hydraulics and water quality. An online model use makes identification of the contaminant source and simulation of the contaminated area possible. The objective of this paper is to present SMaRT-OnlineWDN experience and research results for hydraulic state estimation with sampling frequency of few minutes. A least squares problem with bound constraints is formulated to adjust demand class coefficient to best fit the observed values at a given time. The criterion is a Huber function to limit the influence of outliers. A Tikhonov regularization is introduced for consideration of prior information on the parameter vector. Then the Levenberg-Marquardt algorithm is applied that use derivative information for limiting the number of iterations. Confidence intervals for the state prediction are also given. The results are presented and discussed on real networks in France and Germany.

WISE-MANager: criação e gestão de sessões colaborativas em redes de sensores sem fio

As redes de sensores sem fios (WSN- WSN-Wireless Sensor Network) utilizam um grande número de dispositivos sem fios (sensores), que são de baixo custo e equipados com interfaces wireless. Utilizam um conjunto de sensores autónomos que colaboram entre si para efectuar a monitorização das condições ambientais, tais como: temperatura, oxigénio, luz, humidade, pressão, gases poluentes, entre outras. Estas redes podem operar durante largos períodos de tempo, sem intervenção humana, sendo que esse tempo depende do nível de bateria desses nós. De modo a que os gestores de um Museu possam gerir de forma mais adequada as obras de arte e arquivos históricos, surge o projecto WISE-MUSE – Environmental Monitoring based on Wireless Sensor Networks, que permite implementar soluções para a monitorização museológica, com a utilização de redes de sensores sem fios. Actualmente, a colaboração entre o utilizador e a WSN é muito ténue, sendo que apenas existe colaboração entre os nós sensores. De forma a aumentar esta colaboração, e no âmbito do projecto WISE-MUSE surge o CWSN – Collaborative Wireless Sensor Network Model, que define um modelo de colaboração na rede de sensores sem fios, permitindo a utilização de sessões colaborativas para a monitorização da rede. Com o intuito de obter o máximo rendimento da rede, é necessário definir qual o deployment a utilizar. O tipo de deployment de uma WSN é a forma como os nós são distribuídos pela rede. Em zonas longínquas, ou de difícil acesso, os nós são colocados de forma aleatória, por exemplo, caiem de um avião. Nos locais de fácil acesso, podem ser colocados no local exacto. Portanto, este projecto de Mestrado de Engenharia Informática apresenta duas contribuições principais: (i) um estudo de propagação no Museu da Baleia; e; (ii) o WISE-MANager, um sistema de gestão de sessões colaborativas. De forma a definir qual o deployment da rede a instalar no Museu da Baleia, será apresentado um estudo de propagação do sinal empírico, que determinou a melhor posição física dos nós, para que a rede tenha uma boa performance. O sistema WISE-MANager permite a criação, monitorização e gestão de sessões colaborativas numa WSN baseada no protocolo Zigbee. O intuito da utilização de sessões colaborativas é proporcionar uma melhor interacção entre o utilizador e a WSN, visto que o utilizador pode personalizar o tipo de monitorização a efectuar (por nó sensor, por fenómeno ou por intervalo de tempo), e interrogar à rede e aos seus componentes, aumentando assim a flexibilidade da WSN.A gestão de redes de sensores sem fios é muito importante para que o utilizador tenha controlo sobre a mesma ao saber quais os dispositivos da rede, assim como o seu nível de energia. Por tanto, através de WISE-MANager, os gestores do Museu serão capazes de analisar a rede, detectar eventuais problemas e obter parâmetros específicos.

Desenvolvimento de sistemas embarcados para redes de sensores e atuadores sem fio aplicadas em unidades de elevação de petróleo do tipo Plunger-Lift

The Wireless Sensor Networks (WSN) methods applied to the lifting of oil present as an area with growing demand technical and scientific in view of the optimizations that can be carried forward with existing processes. This dissertation has as main objective to present the development of embedded systems dedicated to a wireless sensor network based on IEEE 802.15.4, which applies the ZigBee protocol, between sensors, actuators and the PLC (Programmable Logic Controller), aiming to solve the present problems in the deployment and maintenance of the physical communication of current elevation oil units based on the method Plunger-Lift. Embedded systems developed for this application will be responsible for acquiring information from sensors and control actuators of the devices present at the well, and also, using the Modbus protocol to make this network becomes transparent to the PLC responsible for controlling the production and delivery information for supervisory SISAL

Análise de desempenho de sistemas de comunicação sem-fio para monitoramento de unidade de produção de poços petrolíferos terrestres

The greater part of monitoring onshore Oil and Gas environment currently are based on wireless solutions. However, these solutions have a technological configuration that are out-of-date, mainly because analog radios and inefficient communication topologies are used. On the other hand, solutions based in digital radios can provide more efficient solutions related to energy consumption, security and fault tolerance. Thus, this paper evaluated if the Wireless Sensor Network, communication technology based on digital radios, are adequate to monitoring Oil and Gas onshore wells. Percent of packets transmitted with successful, energy consumption, communication delay and routing techniques applied to a mesh topology will be used as metrics to validate the proposal in the different routing techniques through network simulation tool NS-2

Desenvolvimento de um software de comunicação sem fio aplicado à instrumentação de unidade de elevação de petróleo tipo Plunger Lift

This dissertation aims to develop a software applied to a communication system for a wireless sensor network (WSN) for tracking analog and digital variables and control valve of the gas flow in artificial oil s elevation units, Plunger Lift type. The reason for this implementation is due to the fact that, in the studied plant configuration, the sensors communicate with the PLC (Programmable and Logic Controller) by the cables and pipelines, making any changes in that system, such as changing the layout of it, as well as inconveniences that arise from the nature of the site, such as the vicinity s animals presence that tend to destroy the cables for interconnection of sensors to the PLC. For software development, was used communication polling method via SMAC protocol (Simple Medium Access ControlIEEE 802.15.4 standard) in the CodeWarrior environment to which generated a firmware, loaded into the WSN s transceivers, present in the kit MC13193-EVK, (all items described above are owners of Freescale Semiconductors Inc.). The network monitoring and parameterization used in its application, was developed in LabVIEW software from National Instruments. The results were obtained through the observation of the network s behavior of sensors proposal, focusing on aspects such as: indoor and outdoor quantity of packages received and lost, general aspects of reliability in data transmission, coexistence with other types of wireless networks and power consumption under different operating conditions. The results were considered satisfactory, which showed the software efficiency in this communication system

Roteamento em Redes de Sensores Sem Fios Com Base Em Aprendizagem Por Reforço

The use of wireless sensor and actuator networks in industry has been increasing past few years, bringing multiple benefits compared to wired systems, like network flexibility and manageability. Such networks consists of a possibly large number of small and autonomous sensor and actuator devices with wireless communication capabilities. The data collected by sensors are sent directly or through intermediary nodes along the network to a base station called sink node. The data routing in this environment is an essential matter since it is strictly bounded to the energy efficiency, thus the network lifetime. This work investigates the application of a routing technique based on Reinforcement Learning s Q-Learning algorithm to a wireless sensor network by using an NS-2 simulated environment. Several metrics like energy consumption, data packet delivery rates and delays are used to validate de proposal comparing it with another solutions existing in the literature

Abordagem dirigida a modelos para redes de sensores sem fio

Research on Wireless Sensor Networks (WSN) has evolved, with potential applications in several domains. However, the building of WSN applications is hampered by the need of programming in low-level abstractions provided by sensor OS and of specific knowledge about each application domain and each sensor platform. We propose a MDA approach do develop WSN applications. This approach allows domain experts to directly contribute in the developing of applications without needing low level knowledge on WSN platforms and, at the same time, it allows network experts to program WSN nodes to met application requirements without specific knowledge on the application domain. Our approach also promotes the reuse of the developed software artifacts, allowing an application model to be reused across different sensor platforms and a platform model to be reused for different applications

Innovations in health care services: The CAALYX system

Purpose: This paper describes proposed health care services innovations, provided by a system called CAALYX (Complete Ambient Assisted Living eXperiment). CAALYX aimed to provide healthcare innovation by extending the state-of-the-art in tele-healthcare, by focusing on increasing the confidence of elderly people living autonomously, by building on the knowledge base of the most common disorders and respective characteristic vital sign changes for this age group. Methods: A review of the state-of-the-art on health care services was carried out. Then, extensive research was conducted on the particular needs of the elderly in relation to home health services that, if offered to them, could improve their day life by giving them greater confidence and autonomy. To achieve this, we addressed issues associated with the gathering of clinical data and interpretation of these data, as well as possibilities of automatically triggering appropriate clinical measures. Considering this initial work we started the identification of initiatives, ongoing works and technologies that could be used for the development of the system. After that, the implementation of CAALYX was done. Findings: The innovation in CAALYX system considers three main areas of contribution: (i) The Roaming Monitoring System that is used to collect information on the well-being of the elderly users; (ii) The Home Monitoring System that is aimed at helping the elders independently living at home being implemented by a device (a personal computer or a set top box) that supports the connection of sensors and video cameras that may be used for monitoring and for interaction with the elder; (iii) The Central Care Service and Monitoring System that is implemented by a Caretaker System where attention and care services are provided to elders, where actors as Caretakers, Doctors and Relatives are logically linked to elders. Innovations in each of these areas are presented here. Conclusions: The ageing European society is placing an added burden on future generations, as the 'elderly-to-working-age-people' ratio is set to steadily increase in the future. Nowadays, quality of life and fitness allows for most older persons to have an active life well into their eighties. Furthermore, many older persons prefer to live in their own house and choose their own lifestyle. The CAALYX system can have a clear impact in increasing older persons' autonomy, by ensuring that they do not need to leave their preferred environment in order to be properly monitored and taken care of. © 2011 Elsevier B.V. All rights reserved.

Development of an instrumentation system embedded on FPGA for real time measurement of mechanical vibrations in rotating machinery

The real-time monitoring of events in an industrial plant is vital, to monitor the actual conditions of operation of the machinery responsible for the manufacturing process. A predictive maintenance program includes condition monitoring of the rotating machinery, to anticipate possible conditions of failure. To increase the operational reliability it is thus necessary an efficient tool to analyze and monitor the equipments, in real-time, and enabling the detection of e.g. incipient faults in bearings. To fulfill these requirements some innovations have become frequent, namely the inclusion of vibration sensors or stator current sensors. These innovations enable the development of new design methodologies that take into account the ease of future modifications, upgrades, and replacement of the monitored machine, as well as expansion of the monitoring system. This paper presents the development, implementation and testing of an instrument for vibration monitoring, as a possible solution to embed in industrial environment. The digital control system is based on an FPGA, and its configuration with an open hardware design tool is described. Special focus is given to the area of fault detection in rolling bearings. © 2012 IEEE.

Estudo e desenvolvimento do índice potencial de impacto de descargas atmosféricas em linhas de transmissão

Pós-graduação em Engenharia Mecânica - FEG

Estudo e simulação de redes de sensores em superfícies não-planas

This Bachelor’s Thesis of Bachelor of Computer Science defines a research and a network sensor simulation on non-planar surfaces . The report is composed of an introduction of the research, a theoretic study, a state of the art and a historic context of sensor network. The simulation consists of the formation of terrain, node’s random distribution and a production and a transmission of the node’s packages. Based on these three important topics , the exchange of information/packages between multiple nodes is through breadth-first search algorithm. The active nodes, node quantity and operation range are also defined in the program. After the program analysis the node activation, the packages are created and transmitted to the next node. This process occurs many times and help on the analysis of the sensor network on non-planar surfaces parameters

Desenvolvimento de um sistema de SHM sem fio e com compensação automática de temperatura

Pós-graduação em Engenharia Elétrica - FEIS

Desenvolvimento de uma rede de sensores sem fio aplicada no monitoramento da variabilidade térmica em casas de vegetação

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Redes dinâmicas de sensores sem fio ZigBee para aplicações de monitoramento e controle

Pós-graduação em Engenharia Elétrica - FEB