Functionally partitioned module-based programmable architecture for wireless base-band processing

A specialised reconfigurable architecture is targeted at wireless base-band processing. It is built to cater for multiple wireless standards. It has lower power consumption than the processor-based solution. It can be scaled to run in parallel for processing multiple channels. Test resources are embedded on the architecture and testing strategies are included. This architecture is functionally partitioned according to the common operations found in wireless standards, such as CRC error correction, convolution and interleaving. These modules are linked via Virtual Wire Hardware modules and route-through switch matrices. Data can be processed in any order through this interconnect structure. Virtual Wire ensures the same flexibility as normal interconnects, but the area occupied and the number of switches needed is reduced. The testing algorithm scans all possible paths within the interconnection network exhaustively and searches for faults in the processing modules. The testing algorithm starts by scanning the externally addressable memory space and testing the master controller. The controller then tests every switch in the route-through switch matrix by making loops from the shared memory to each of the switches. The local switch matrix is also tested in the same way. Next the local memory is scanned. Finally, pre-defined test vectors are loaded into local memory to check the processing modules. This paper compares various base-band processing solutions. It describes the proposed platform and its implementation. It outlines the test resources and algorithm. It concludes with the mapping of Bluetooth and GSM base-band onto the platform.

Investigations into diversity of A 2x2 MIMO system with the use of an indoor testbed

This paper presents investigations into an indoor 2×2 multiple input multiple output (MIMO) system, whose diversity performance is assessed using a high precision test-bed. In this system, transmitter and receiver are equipped with 180° or 90° 3dB hybrids with their two output ports terminated with co-polar monopole antennas. By feeding a signal to one of the two input ports of the hybrid (while the other input port is matched terminated) different communication channels in a rich-scattering environment can be created. The test-bed allows for the signal strength measurements around the receiver/ transmitter sides for a given feeding configuration of hybrids when the receiver is moved over a circular region in an indoor environment. The signal strengths maps obtained for various modes of this 2×2 MIMO system are foundations for investigating transmit/receive diversity schemes. As the signal strength measurement results are obtained with Bluetooth modules operating in the ISM 2.4 GHz, the results are of importance to many other wireless systems that aim at utilizing MIMO diversity schemes to enhance their performance in this frequency band.

Indoor antenna diversity testbed

This paper presents a high precision testbed for evaluating antenna diversity techniques in an indoor environment. Details concerning mechanical, electrical and electronics hardware and associated measurement software are described. Initial measurement results for two Bluetooth modules operating with co-polar and cross-polar monopole antennas in the ISM 2.4 GHz band are given.

Hop selection in peer-to-peer WPAN networks

Currently, wireless technology is revolutionizing the way we share information and communicate. The demands for mobility have made wireless technology the primary source for voice communication. Code-division multiple-access (CDMA) is a very popular spread spectrum application due to its claims of low transmission power, higher system capacity, ability to mitigate multipath fading and user interference. In that case, frequency-hopping code-division multiple access (FH-CDMA) has received considerable attention over the past few years. This technique will allow a better performance over a fading channel, message privacy, and immunity to narrowband interference. This paper addresses the characteristics of FH-CDMA in WPAN networks, with an emphasis on frequency-hopped Bluetooth systems. A performance evaluation of FH-CDMA is discussed and simulated. The analysis shows the interaction between the designed parameters and their effect on the network system. Most specifically, the FH-CDMA scheme provides frequency and temporal diversity to combat the effects of interference.

Demonstrating the effects of multi-path propagation and advantages of diversity antenna techniques

In this paper, experimental investigations are performed into assessing the quality of communication link between Bluetooth devices in an indoor environment, as an initial step of demonstrating benefits of diversity and smart antenna techniques in mobile computing.

Tablet App halometer for the assessment of dysphotopsia

Purpose To assess the validity and repeatability of the Aston Halometer. Setting University clinic, United Kingdom. Design Prospective, repeated-measures experimental study. Methods The halometer comprises a bright light-emitting-diode (LED) glare source in the center of an iPad4. Letters subtending 0.21° (∼0.3 logMAR) were moved centrifugally from the LED in 0.05 degree steps in 8 orientations separated by 45 degrees for each of 4 contrast levels (1000, 500, 100, and 25 Weber contrast units [Cw]) in random order. Bangerter occlusion foils were inserted in front of the right eye to simulate monocular glare conditions in 20 subjects (mean age 27.7 ± 3.1 years). Subjects were positioned 2 meters from the screen in a dark room with the iPad controlled from an iPhone via Bluetooth operated by the researcher. The C-Quant straylight meter was also used with each of the foils to measure the level of straylight over the retina. Halometry and straylight repeatability was assessed at a second visit. Results Halo size increased with the different occlusion foils and target contrasts (F = 29.564, P <.001) as expected and in a pattern similar to straylight measures (F = 80.655, P <0.001). Lower contrast letters showed better sensitivity but larger glare-obscured areas, resulting in ceiling effects caused by the screen's field-of-view, with 500 Cw being the best compromise. Intraobserver and interobserver repeatability of the Aston Halometer was good (500Cw: 0.84 to 0.93 and 0.53 to 0.73) and similar to the straylight meter. Conclusion The halometer provides a sensitive, repeatable way of quantifying a patient-recognized form of disability glare in multiple orientations to add objectivity to subjectively reported discomfort glare.

Modeling impact of both frame collisions and frame corruptions on IEEE 802.15.4 channel access for smart grid applications

IEEE 802.15.4 standard has been recently developed for low power wireless personal area networks. It can find many applications for smart grid, such as data collection, monitoring and control functions. The performance of 802.15.4 networks has been widely studied in the literature. However the main focus has been on the modeling throughput performance with frame collisions. In this paper we propose an analytic model which can model the impact of frame collisions as well as frame corruptions due to channel bit errors. With this model the frame length can be carefully selected to improve system performance. The analytic model can also be used to study the 802.15.4 networks with interference from other co-located networks, such as IEEE 802.11 and Bluetooth networks. © 2011 Springer-Verlag.

A compact, portable and low cost generic interrogation strain sensor system using an embedded VCSEL, detector and fibre Bragg grating

We present a compact, portable and low cost generic interrogation strain sensor system using a fibre Bragg grating configured in transmission mode with a vertical-cavity surface-emitting laser (VCSEL) light source and a GaAs photodetector embedded in a polymer skin. The photocurrent value is read and stored by a microcontroller. In addition, the photocurrent data is sent via Bluetooth to a computer or tablet device that can present the live data in a real time graph. With a matched grating and VCSEL, the system is able to automatically scan and lock the VCSEL to the most sensitive edge of the grating. Commercially available VCSEL and photodetector chips are thinned down to 20 µm and integrated in an ultra-thin flexible optical foil using several thin film deposition steps. A dedicated micro mirror plug is fabricated to couple the driving optoelectronics to the fibre sensors. The resulting optoelectronic package can be embedded in a thin, planar sensing sheet and the host material for this sheet is a flexible and stretchable polymer. The result is a fully embedded fibre sensing system - a photonic skin. Further investigations are currently being carried out to determine the stability and robustness of the embedded optoelectronic components. © 2012 Copyright Society of Photo-Optical Instrumentation Engineers (SPIE).

A compact, portable and low cost generic interrogation strain sensor system using an embedded VCSEL, detector and fibre Bragg grating

We present a compact, portable and low cost generic interrogation strain sensor system using a fibre Bragg grating configured in transmission mode with a vertical-cavity surface-emitting laser (VCSEL) light source and a GaAs photodetector embedded in a polymer skin. The photocurrent value is read and stored by a microcontroller. In addition, the photocurrent data is sent via Bluetooth to a computer or tablet device that can present the live data in a real time graph. With a matched grating and VCSEL, the system is able to automatically scan and lock the VCSEL to the most sensitive edge of the grating. Commercially available VCSEL and photodetector chips are thinned down to 20 µm and integrated in an ultra-thin flexible optical foil using several thin film deposition steps. A dedicated micro mirror plug is fabricated to couple the driving optoelectronics to the fibre sensors. The resulting optoelectronic package can be embedded in a thin, planar sensing sheet and the host material for this sheet is a flexible and stretchable polymer. The result is a fully embedded fibre sensing system - a photonic skin. Further investigations are currently being carried out to determine the stability and robustness of the embedded optoelectronic components. © 2012 Copyright Society of Photo-Optical Instrumentation Engineers (SPIE).

Agent-Oriented Middleware Supporting Delivery of Mobile Elearning Services

Within project Distributed eLearning Center (DeLC) we are developing a system for distance and eLearning, which offers fixed and mobile access to electronic content and services. Mobile access is based on InfoStation architecture, which provides Bluetooth and WiFi connectivity. On InfoStation network we are developing multi-agent middleware that provides context-aware, adaptive and personalized access to the mobile services to the users. For more convenient testing and optimization of the middleware a simulation environment, called CA3 SiEnv, is being created.

A wearable device for recording of biopotentials and body movements

Long term recording of biomedical signals such as ECG, EMG, respiration and other information (e.g. body motion) can improve diagnosis and potentially monitor the evolution of many widespread diseases. However, long term monitoring requires specific solutions, portable and wearable equipment that should be particularly comfortable for patients. The key-issues of portable biomedical instrumentation are: power consumption, long-term sensor stability, comfortable wearing and wireless connectivity. In this scenario, it would be valuable to realize prototypes using available technologies to assess long-term personal monitoring and foster new ways to provide healthcare services. The aim of this work is to discuss the advantages and the drawbacks in long term monitoring of biopotentials and body movements using textile electrodes embedded in clothes. The textile electrodes were embedded into garments; tiny shirt and short were used to acquire electrocardiographic and electromyographic signals. The garment was equipped with low power electronics for signal acquisition and data wireless transmission via Bluetooth. A small, battery powered, biopotential amplifier and three-axes acceleration body monitor was realized. Patient monitor incorporates a microcontroller, analog-to-digital signal conversion at programmable sampling frequencies. The system was able to acquire and to transmit real-time signals, within 10 m range, to any Bluetooth device (including PDA or cellular phone). The electronics were embedded in the shirt resulting comfortable to wear for patients. Small size MEMS 3-axes accelerometers were also integrated. © 2011 IEEE.

Implementazione e valutazione delle prestazioni di algoritmi di localizzazione Indoor basati su dispositivi Beacon

Questo elaborato di tesi ha lo scopo di illustrare un'applicazione realizzata per dispositivi Android in grado di localizzare l'utente all'interno di un ambiente indoor sfruttando l'utilizzo dei Beacon e dare una valutazione dei risultati ottenuti. L'utente potrà registrare i dispositivi Beacon in suo possesso all'interno dell'applicazione, caricare la planimetria di un ambiente e configurarlo indicando esattamente quale Beacon si trova in una determinata posizione. Infine potrà scegliere quale tra i tre algoritmi implementati (Prossimità, Triangolazione e Fingerprinting) utilizzare per visualizzare la propria posizione sulla mappa. I tre algoritmi sono stati sottoposti a vari test che hanno permesso di analizzare le differenze tra di essi in termini di accuratezza e le performance generali dell'applicativo.

Soluções de controlo de dispositivos para automação residencial

Nos últimos anos temos assistido ao aparecimento de novos dispositivos inteligentes e sistemas de automação residencial. Com o objetivo de conectar e controlar equi- pamentos eletrónicos, dentro de uma habitação, existe a necessidade de desenvolver soluções integradas de controlo remoto. Os smartphones, apresentam todas as carac- terísticas, poder computacional e portabilidade, ideais para controlo e monitorização deste tipo de dispositivos. Quando se considera o desenvolvimento de um produto novo e dependendo do problema, escolher a abordagem e tecnologias mais adequadas nem sempre é fácil. Este projeto apresenta um conjunto de tecnologias e soluções de controlo baseadas em arquiteturas móveis. Para prova de conceito, e baseado num sistema real (IVIT), é proposta uma solução inovadora usando um smartphone. O IVIT, desenvolve uma tecnologia para aplicar num reservatório de aquecimento de água de inércia variável, com funcionalidades de monitorização, controlo e operação colaborativa do sistema de aquecimento. Os resultados obtidos comprovaram que o desempenho da aplicação ultrapassou as expectativas e que a solução proposta é uma alternativa viável para o controlo de dispositivos para automação residencial usando smartphones.

Publicidade em celulares utilizando o sistema de busca de perfil

ARAÚJO, B. G. ; VALENTIM, R. A. M. . Publicidade em celulares utilizando o sistema de busca de perfil. Holos, Natal,v. 1, p. 109-118, 2010. Disponível em:

Esineiden internetin verkkostandardit älykodissa

Tutkielman tavoitteena on esitellä esineiden internetin kokonaisuutta ja tutkia siellä käytettäviä langattomia verkkostandardeja sekä niiden käyttöä älykodissa. Esineiden internetin soveltamisalueet jakautuvat älykodin, teollisuuden ja yhteiskunnan osa-alueisiin. Näistä älykotia käsitellään tutkielmassa tarkemmin. Työssä selvitetään, mitkä ovat esineiden internetin yleisimmät langattomat verkkostandardit ja niiden ominaisuudet. Lisäksi selvitetään, mistä osista älykoti koostuu, mitkä ovat soveltamisalueet ja miten älykoti toimii. Vertailukohteina käytetään kahden suuren elektroniikkavalmistajan, Samsungin ja LG:n, älykotiratkaisuja. Tutkielmassa esitellään esineiden internetin määritelmä, sen historiaa ja käyttökohteita, jotta saadaan yleiskuva esineiden internetin kokonaisuudesta. Tämän jälkeen syvennytään langattomiin verkkostandardeihin, jotka ovat keskeisesti käytössä esineiden internetissä. Kyseiset verkkostandardit ovat Bluetooth, Bluetooth Low Energy, NFC, Wi-Fi, Zigbee ja 6LoWPAN. Lopuksi käsitellään älykotia ja sen ominaisuuksia. Samalla tutkitaan Samsungin ja LG:n älykotilaitteita ja pohditaan niiden toimivuutta. Lisäksi pohditaan verkkostandardien käyttöä älykodeissa sekä esineiden internetin ja älylaitteiden vaikutuksia ihmisiin. Lopputuloksena todetaan, että Wi-Fi, Bluetooth ja Zigbee ovat yleisimmät älykodin verkkostandardit ja että ainoastaan yksi verkkostandardi ei tällä hetkellä riitä monipuolisen älykodin kaikkia toimintoja varten. Vertailussa huomataan Samsungin älykotiratkaisun olevan kehityksessä LG:tä edellä.