Notas sobre o Trypanosoma cruzi e suas características bio-ecológicas, como agente de enfermidades transmitidas por alimentos

São revistas evidências experimentais e observações de terreno que demonstram a transmissão do Trypanosoma cruzi ao homem e vários mamíferos pela via oral, que ocorre especialmente no ciclo enzoótico do parasita. Vários tipos de alimentos e veículos de carreamento do flagelado têm sido implicados nesta modalidade de transmissão, geralmente sendo os casos humanos relacionados com triatomíneos infectados nas imediações do evento. Sumariam-se as vias de penetração (mucosas da boca, esôfago, estômago e intestino) e se descrevem os principais eventos anatomopatológicos, tais como fenômenos hemorrágicos, mesenterite e hepatite intersticial. Em particular são analisados aspectos da biologia e da bioquímica do parasita, com vistas à epidemiologia da transmissão oral e às possibilidades de sua prevenção na doença de Chagas.

Métodos inovadores para a bio-secagem do CDR produzido na linha de processo da unidade de Tratamento Mecânico e Biológico (TMB) – Caso de estudo na VALNOR SA

A presente dissertação foca-se em métodos inovadores para a bio-secagem do Combustível Derivado de Resíduos (CDR) produzido na linha de Tratamento Mecânico de Biológico (TMB), na VALNOR SA. O CDR representa 25 a 35% dos resíduos indiferenciados tratados numa unidade de TMB e que resulta do refugo e rejeitados retirados na linha de triagem mecânica e no processo de afinação do composto orgânico. O CDR pode ser utilizado como combustível alternativo ao combustível fóssil em centrais de co-geração e/ou cimenteiras. No caso da indústria cimenteira, a secagem do CDR é fundamental (a humidade média é de 40 a 50% e, terá de se reduzir para 20% ou inferior) de modo a aumentar o seu Poder Calorífico Inferior (PCI), para maior eficiência energética no processo produtivo nos fornos do clínquer e dar cumprimento à redução de utilização dos combustíveis fósseis que a União Europeia pretende. Com este trabalho, contribuiu-se com mais um passo no sentido de se viabilizarem as melhores opções técnico-ambientais e económicas para se cumprirem os objetivos prioritários no domínio da valorização dos resíduos passando a ser um recurso ou produto. Com efeito a substituição do combustível fóssil por um combustível alternativo do tipo do CDR não só se traduz em benefícios ambientais, nomeadamente a redução de deposição em aterro, a redução das emissões de Gases com Efeito de Estufa (GEE) e o cumprimento dos objetivos e metas do Plano Estratégico para os Resíduos Sólidos Urbanos (PERSU) 2020, como também enquadra evidentes vantagens económicas enquanto recurso alternativo e minimiza o valor do instrumento financeiro da Taxa de Gestão de Resíduos (TGR) que se prevê aumentar significativamente até 2020 no que respeita à deposição de resíduos/refugos/rejeitados em aterro.

Development of bio-batteries based on electrospun membranes

Fundação para a Ciência e a Tecnologia (FCT-MCTES) under the grant SFRH/BD/69306/2010

Projecto de um bio-reactor para cultura celular em membranas tubulares

O Grupo de Engenharia de Tecidos da FCT/UNL desenvolve e produz membranas poliméricas tubulares biodegradáveis que servem de substrato a culturas celulares e que se destinam a substituir temporariamente vasos sanguíneos danificados. O objectivo desta dissertação foi o desenvolvimento de um bio-reactor com a capacidade de bombeamento controlado de um fluido adequado à manutenção de uma cultura celular, que simula a passagem do fluxo sanguíneo pelo interior das membranas tubulares, permitindo que as células nelas semeadas recebam os estímulos adequados ao seu desenvolvimento. Foi construído um bio-reactor de perfusão pulsátil para cultura celular em membranas tubulares que é instalável numa incubadora, beneficiando assim de condições ambientais — pH, temperatura e humidade — semelhantes às fisiológicas. O bio-reactor é capaz de gerar estímulos mecânicos pulsáteis favoráveis ao alinhamento de células endoteliais e de músculo liso. O sistema foi desenvolvido de modo a que a pressão e o caudal aplicados às membranas pudessem ser monitorizados e controlados. Foram semeadas células endoteliais em matrizes planas de policaprolactona, tendo-se confirmado a sua adesão e proliferação por microscopia de fluorescência. Após enrolamento, obtiveram-se duas membranas tubulares com células endoteliais semeadas no lúmen. Uma delas foi submetida a cultura estática, e outra a cultura dinâmica no bio-reactor. Após 10 dias de condicionamento in vitro, as membranas foram novamente observadas por microscopia de fluorescência. Os resultados obtidos não foram conclusivos, pelo que serão necessários novos estudos para concluir se o bio-reactor construído é capaz de garantir o condicionamento mecânico das células semeadas nas matrizes.

A logical foundation for session-based concurrent computation

Linear logic has long been heralded for its potential of providing a logical basis for concurrency. While over the years many research attempts were made in this regard, a Curry-Howard correspondence between linear logic and concurrent computation was only found recently, bridging the proof theory of linear logic and session-typed process calculus. Building upon this work, we have developed a theory of intuitionistic linear logic as a logical foundation for session-based concurrent computation, exploring several concurrency related phenomena such as value-dependent session types and polymorphic sessions within our logical framework in an arguably clean and elegant way, establishing with relative ease strong typing guarantees due to the logical basis, which ensure the fundamental properties of type preservation and global progress, entailing the absence of deadlocks in communication. We develop a general purpose concurrent programming language based on the logical interpretation, combining functional programming with a concurrent, session-based process layer through the form of a contextual monad, preserving our strong typing guarantees of type preservation and deadlock-freedom in the presence of general recursion and higher-order process communication. We introduce a notion of linear logical relations for session typed concurrent processes, developing an arguably uniform technique for reasoning about sophisticated properties of session-based concurrent computation such as termination or equivalence based on our logical approach, further supporting our goal of establishing intuitionistic linear logic as a logical foundation for sessionbased concurrency.

Phage display as a tool for generation of bio-therapeutic agents for breast cancer

Notch is a conserved signalling pathway, which plays a crucial role in a multiple cellular processes such as stem cell self-renewal, cell division, proliferation and apoptosis. In mammalian, four Notch receptors and five ligands are described, where interaction is achieved through their extracellular domains, leading to a transcription activation of different target genes. Increased expression of Notch ligands has been detected in several types of cancer, including breast cancer suggesting that these proteins represent possible therapeutic targets. The goal of this work was to generate quality protein targets and, by phage display technology, select function-blocking antibodies specific for Notch ligands. Phage display is a powerful technique that allows the generation of highly specific antibodies to be used for therapeutics, and it has also proved to be a reliable approach in identifying and validating new cancer-related targets. Also, we aimed at solving the tri-dimensional structure of the Notch ligands alone and in complex with selected antibodies. In this work, the initial phase focused on the optimization of the expression and purification of a human Delta-like 1 ligand mutant construct (hDLL1-DE3), by refolding from E. coli inclusion bodies. To confirm the biological activity of the produced recombinant protein cellular functional studies were performed, revealing that treatment with hDLL1-DE3 protein led to a modulation of Notch target genes. In a second stage of this study, Antibody fragments (Fabs) specific for hDLL1-DE3 were generated by phage display, using the produced protein as target, in which one good Fab candidate was selected to determine the best expression conditions. In parallel, multiple crystallization conditions were tested with hDLL1-DE3, but so far none led to positive results.

Bio-valorization of crude glycerol through polyhydroxyalkanoates production

Due to the prospective partial replacement of fossil fuels by biodiesel, its production has continuously grown in the last decade. The increase in global biodiesel production demands the development of sustainable applications of its main by-product, crude glycerol. In this thesis the feasibility of producing polyhydroxyalkanoates (PHA) by a mixed microbial community using crude glycerol as feedstock was investigated. Several incubation conditions were studied in order to maximize PHA production. The microbial population selected under aerobic dynamic feeding conditions had the ability to consume both major carbon fractions present in the crude, glycerol and methanol. Two biopolymers were stored, poly-3-hydroxybutyrate (PHB) and glucose biopolymer (GB), apparently using glycerol as the only carbon source for their production. The microbial enrichment obtained was able to accumulate up to 47% PHB of cell dry weight with a productivity of 0.24 g HA/L d. The overall PHA yield on total substrate consumed (0.32 g COD HB/g COD crude glycerol) was in the middle range of those reported in literature (0.08–0.58 g COD PHA/g COD real waste). The increase of temperature from 23ºC to 30ºC favored the culture fraction that accumulates glucose biopolymer with a maximum accumulation value of 25% of cell dry weight, which is an interesting value but not the main goal of this thesis. The fact that crude glycerol can be used to produce PHA without any pre-treatment step, makes the overall production process economically more competitive, reducing polymer final cost. This was the first study that demonstrates the valorization of the glycerol fraction present in the crude glycerol into PHA using an aerobic mixed microbial consortium.

Minimal computation structures for visual information applications based on printed electronics

In the early nineties, Mark Weiser wrote a series of seminal papers that introduced the concept of Ubiquitous Computing. According to Weiser, computers require too much attention from the user, drawing his focus from the tasks at hand. Instead of being the centre of attention, computers should be so natural that they would vanish into the human environment. Computers become not only truly pervasive but also effectively invisible and unobtrusive to the user. This requires not only for smaller, cheaper and low power consumption computers, but also for equally convenient display solutions that can be harmoniously integrated into our surroundings. With the advent of Printed Electronics, new ways to link the physical and the digital worlds became available. By combining common printing techniques such as inkjet printing with electro-optical functional inks, it is starting to be possible not only to mass-produce extremely thin, flexible and cost effective electronic circuits but also to introduce electronic functionalities into products where it was previously unavailable. Indeed, Printed Electronics is enabling the creation of novel sensing and display elements for interactive devices, free of form factor. At the same time, the rise in the availability and affordability of digital fabrication technologies, namely of 3D printers, to the average consumer is fostering a new industrial (digital) revolution and the democratisation of innovation. Nowadays, end-users are already able to custom design and manufacture on demand their own physical products, according to their own needs. In the future, they will be able to fabricate interactive digital devices with user-specific form and functionality from the comfort of their homes. This thesis explores how task-specific, low computation, interactive devices capable of presenting dynamic visual information can be created using Printed Electronics technologies, whilst following an approach based on the ideals behind Personal Fabrication. Focus is given on the use of printed electrochromic displays as a medium for delivering dynamic digital information. According to the architecture of the displays, several approaches are highlighted and categorised. Furthermore, a pictorial computation model based on extended cellular automata principles is used to programme dynamic simulation models into matrix-based electrochromic displays. Envisaged applications include the modelling of physical, chemical, biological, and environmental phenomena.

Engineering bio-based polymers using alternative solvents and processes

The work presented in this thesis explores novel routes for the processing of bio-based polymers, developing a sustainable approach based on the use of alternative solvents such as supercritical carbon dioxide (scCO2), ionic liquids (ILs) and deep eutectic solvents (DES). The feasibility to produce polymeric foams via supercritical fluid (SCF) foaming, combined with these solvents was assessed, in order to replace conventional foaming techniques that use toxic and harmful solvents. A polymer processing methodology is presented, based on SCF foaming and using scCO2 as a foaming agent. The SCF foaming of different starch based polymeric blends was performed, namely starch/poly(lactic acid) (SPLA) and starch/poly(ε-caprolactone) (SPCL). The foaming process is based on the fact that CO2 molecules can dissolve in the polymer, changing their mechanical properties and after suitable depressurization, are able to create a foamed (porous) material. In these polymer blends, CO2 presents limited solubility and in order to enhance the foaming effect, two different imidazolium based ILs (IBILs) were combined with this process, by doping the blends with IL. The use of ILs proved useful and improved the foaming effect in these starch-based polymer blends. Infrared spectroscopy (FTIR-ATR) proved the existence of interactions between the polymer blend SPLA and ILs, which in turn diminish the forces that hold the polymeric structure. This is directly related with the ability of ILs to dissolve more CO2. This is also clear from the sorption experiments results, where the obtained apparent sorption coefficients in presence of IL are higher compared to the ones of the blend SPLA without IL. The doping of SPCL with ILs was also performed. The foaming of the blend was achieved and resulted in porous materials with conductivity values close to the ones of pure ILs. This can open doors to applications as self-supported conductive materials. A different type of solvents were also used in the previously presented processing method. If different applications of the bio-based polymers are envisaged, replacing ILs must be considered, especially due to the poor sustainability of some ILs and the fact that there is not a well-established toxicity profile. In this work natural DES – NADES – were the solvents of choice. They present some advantages relatively to ILs since they are easy to produce, cheaper, biodegradable and often biocompatible, mainly due to the fact that they are composed of primary metabolites such as sugars, carboxylic acids and amino-acids. NADES were prepared and their physicochemical properties were assessed, namely the thermal behavior, conductivity, density, viscosity and polarity. With this study, it became clear that these properties can vary with the composition of NADES, as well as with their initial water content. The use of NADES in the SCF foaming of SPCL, acting as foaming agent, was also performed and proved successful. The SPCL structure obtained after SCF foaming presented enhanced characteristics (such as porosity) when compared with the ones obtained using ILs as foaming enhancers. DES constituted by therapeutic compounds (THEDES) were also prepared. The combination of choline chloride-mandelic acid, and menthol-ibuprofen, resulted in THEDES with thermal behavior very distinct from the one of their components. The foaming of SPCL with THEDES was successful, and the impregnation of THEDES in SPCL matrices via SCF foaming was successful, and a controlled release system was obtained in the case of menthol-ibuprofen THEDES.

Ontology-based representation and generation of workflows for micro-task human-machine computation

Doctoral Program in Computer Science

Advancing tendon regeneration through the development of bio-stimulating tissue engineering approaches

Tendon tissue engineering (TE) requires tailoring scaffolds designs and properties to the anatomical and functional requirements of tendons located in different regions of the body. Cell sourcing is also of utmost importance as tendon cells are scarce. Recently, we have found that it is possible to direct the tenogenic differentiation of Amniotic fluid and Adipose tissue derived stem cells (hAFSCs and hASCs), and also that there are hASCs subpopulations that might be more prone to tenogenic differentiation. Nevertheless, biochemical stimulation may not be enough to develop functional TE substitutes for a tissue that is known to be highly dependent on mechanical loading.

Biologia e controle microbiano de Urbanus acawoios (Williams, 1926) (Lepidoptera: Hesperiidae): I. descrição morfológica e aspectos Bio-ecológicos

Devido aos danos dos ataques de Urbanus acawoios (Williams, 1926) (Lepidoptera: Hesperiidae) em palheteiras (Clitoria racemosa) (Leguminosae) em Manaus, AM e a total ausência de qualquer informação a respeito desta espécie, o presente trabalho foi desenvolvido visando a obtenção de conhecimentos que facilitem a identificação de métodos seguros e eficientes para o seu controle. Os estudos biológicos revelaram que este inseto é multivoltino, tendo duração média de 41,89 ± 0,98 dias por geração. As condições climáticas na cidade de Manaus, a disponibilidade de alimentos, e possivelmente a ausência de inimigos naturais eficientes, parecem ser os fatores principais responsáveis pela ocorrência de erupções populacionais desta espécie. Enquanto o estágio larval consiste de 5 fases (ínstares) e dura em média 18,46 ± 1,28 dias, o da pupa necessita 9,96 ± 1,05, e o adulto 13,47 ± 0,27 dias, sob condições de 30°C e 85% UR. Estudos morfológicos foram incluídos.

Combining data mining and evolutionary computation for multi-criteria optimization of earthworks

Earthworks tasks aim at levelling the ground surface at a target construction area and precede any kind of structural construction (e.g., road and railway construction). It is comprised of sequential tasks, such as excavation, transportation, spreading and compaction, and it is strongly based on heavy mechanical equipment and repetitive processes. Under this context, it is essential to optimize the usage of all available resources under two key criteria: the costs and duration of earthwork projects. In this paper, we present an integrated system that uses two artificial intelligence based techniques: data mining and evolutionary multi-objective optimization. The former is used to build data-driven models capable of providing realistic estimates of resource productivity, while the latter is used to optimize resource allocation considering the two main earthwork objectives (duration and cost). Experiments held using real-world data, from a construction site, have shown that the proposed system is competitive when compared with current manual earthwork design.

Secure multiParty computation protocols

Dissertação de Mestrado em Engenharia Informática

Development of polymer wicks for the fabrication of bio-medical sensors

Polymer based wicking structures were fabricated by sintering powders of polycarbonate (PC), ultra-high molecular weight polyethylene and polyamide 12, aiming at selecting a suitable material for an innovative electroencephalography (EEG) bio-electrode. Preliminary experiments showed that PC based wicks displayed the best mechanical properties, therefore more detailed studies were carried out with PC to evaluate the influence of powder granulometry and processing parameters (pressure, temperature and time) on the mechanical properties, porosity, mean pore radius and permeability of the wicks. It was concluded that the mechanical properties are significantly enhanced by increasing the processing time and pressure, although at the expense of a significant decrease of porosity and mean pore diameter (and thus permeability), particularly for the highest applied pressures (74kPa). However, a good compromise between porosity/permeability and mechanical properties could be obtained by sintering PC powders of particle sizes below 500μm at 165°C for 5min, upon an applied pressure of 56kPa. Moreover, PC proved to be chemically stable in contact with an EEG common used disinfectant. Thus, wicking structures with appropriate properties for the fabrication of reusable bio-electrodes could be fabricated from the sintering of PC powders.