Integração ortodontia e dermatologia na busca da excelência na estética bucal

In recent years the number of adult Patients who seek esthetic treatments has increased. Among the patients main concern, lip augmentation has increased, and this procedure has been very well performed and studied by dermatologists and plastic surgeons. Although Orthodontics can achieve good esthetic results through teeth and jaw proper positioning it is a time consuming approach and it discloses some anatomical and biological limitations. Dermatology may be an excellent alternative to enhance orthodontic results through lip augmentation. The aim of this paper is to discuss some dermatology techniques currently available to augment the lips as well as describe a case report highlighting the need for interdisciplinary approach to enhance facial esthetics goals.

Montagem e confecção do set up ortodôntico

Diagnosis and planning stages are critical to the success of orthodontic treatment, in which the orthodontist should have many elements that contribute to the most appropriate decision-making. The orthodontic set-up is an important resource in the planning of corrective orthodontics therapy. It consists of the repositioning of the teeth previously removed from the study dental casts and reassembled on its remaining basis. When properly made, the set-up allows a three-dimensional preview of problems and limitations of the case, assisting in decision-making regarding tooth extractions in cases with problems of space, amount of anchorage loss extent and type of tooth movement, discrepancy of dental arch perimeter, discrepancy of inter-arch tooth volume, among others, indicating the best option for treatment. This paper outlines the most important steps for its confection, an evaluation system and its application in the preparation of orthodontic treatment planning.

Necessidade de ancoragem do grupo A e o controle biomecanico da mola T pré-ativada por curvatura para o fechamento de espacos

Contemporary orthodontics has sought, beyond the esthetic, occlusal and functional goals, treatments even faster and with less visits to the orthodontist — especially in patients that require dental extractions in which the generated space becomes a nuisance. The segmented arch technic (SAT), by the use of a "T" loop spring, has provided such results within these requirements. Therefore, this study aimed to appraise and demonstrate the confection, activation and biomechanical control of "T" loop spring, in the group with high anchorage necessity (group A), for retraction of anterior teeth; as well as to present a case report, with high anterior retraction necessity, treated with "T" loop spring.

Tratamento da má oclusão de classe II com aparelho Jasper Jumper

The Jasper Jumper appliance was developed as a fixed orthopedic device that is connected to the upper and lower leveling arches to promote the Class II correction by restricting the maxillary growth (headgear effect), mandibular growth inducement (activator effect) and dentoalveolar changes.

Resistência ao cisalhamento de bráquetes fotopolimerizados com arco de plasma, LED e luz halógena utilizando diferentes tempos

This study evaluated in vitro the shear bond strength of brackets bonded with xenon plasma arc light, light-emitting diode (LED) and conventional halogen light using different curing times. Brackets were bonded to the buccal surface of 60 human maxillary premolars allocated to five groups. In groups 1 and 2, the resin was cured with the plasma arc for three and six seconds (s), respectively; in groups 3 and 4, the LED was used for five and ten s, respectively; and in group 5, the halogen light was used for 40 s. The specimens were stored in water for 24 hours and subjected to a shear force until bracket failure. The debonding pattern was classified according to the adhesive remnant index (ARI). The results were assessed by Anova and the SNK post-hoc test. No differences were detected among groups 2, 4 and 5, which showed higher averages than groups 1 and 3, which were not different between themselves. The ARI scores showed no differences among the three types of light sources in all times tested. Plasma arc and LED lights can be used with shorter curing times, within certain limits, than conventional halogen light for bonding orthodontic brackets, without decreasing bond strength.

Estudo cefalométrico comparativo dos traçados predictivos e resultados ortodôntico-cirúrgicos em pacientes com face longa

The purpose of this research was to compare, by cephalometric analysis (McNamara and Legan & Burstone) the predictive tracings (by methods manual, and by softwares Dentofacial Planner Plus and Dolphin Image) with the post surgical results. Were selected the pre and post surgical lateral telerradiograph (six months after orthognatic surgery) of the 25 long face patients treated with combined orthognatic surgery. Were made the prediction tracings for each method and comparing cephalometrically with the post surgical results. This protocol was repeated once more for the error method evaluation, and the statistical was made by variance analysis and Tuckey overtest. The results show more frequency of the cephalometric values' aproximation of the post surgical results when the manual method (50% of the similarity with the post surgical result), followed of the DFPlus (31,2%) and Dolphin (18,8%) softwares. The experimental condition permits to conclude that the manual method had more precision, although the previsibility of the digital methods was reasonable satisfactory.

Reabilitação estético-funcional sobre implantes agulhados e endósseos

This report shows the resolution of a case study whose aim was promote the aesthetic and functional rehabilitation of upper left hemi-arch over endosseous and needle implant prostheses. To improve the position of the needle implants, we performed the bucco-palatal bending of needles splinting them with composite resin; we removed the screwed implant prosthesis in the regions of the premolars (24 and 25) and molar (26). The mini-abutments of the last two implants were replaced, and in the first premolar and canine, we used cemented abutments due to implant angulation having planned soldering because of implant size and contact with one needle implant that could interfere with intimate contact bone/implant damaging biomechanics. Pick-up impressions were performed with an open tray, using a retractor cord in the needle implants and respective transfer copings. Therefore, models were related on semi-adjustable articulator after a face-bow recording and interocclusal indexes. After working cast fabrication and try-in of infra-structures, these were adjusted and related into the articulator again. Then, after ceramic build-up, adjustments, finishing, and torque, chemically-activated resin cement was applied on units 21 to 24. At the end of the case, we concluded that a good aesthetic and functional rehabilitation depends on thorough knowledge of techniques for each clinical situation.

Dentinogenesis imperfecta type II: approach for dental treatment

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Análise metalográfica do titânio puro submetido à soldagem laser Nd: YAG e TIG

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Mineral Loss and Morphological Changes in Dental Enamel Induced by a 16% Carbamide Peroxide Bleaching Gel

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Tratamento conservador de fratura de arco zigomátio: uma visão conservadora

Introduction: The zygomatic maxillary complex is the second most affected area of the face due to injuries, surpassed only by the nasal bones. The zygomatic arch fracture is under the direct action of trauma (punch, head butt), its fragile structure, losing its normal convex curvature in the temporal area. Objective: To report a case, using a reduction technique of zygomatic arch fracture using a hook or Ginestet Barros. Case report: A male patient, 25 years of age, leukoderma, showing zygomatic arch fracture right. The patient underwent closed reduction with the hook adapted to the skin. The patient was instructed to keep care of the region for at least four weeks

O Uso do Arco Facial para o correto posicionamento dos modelos no articulador

It presented the main features so that the wax plan can be conveniently filling the aesthetic and functional requirement of a denture. The steps of face bow mounting and wax plan transfer form the mouth to the articulator, considering the necessary requirement for this purpose are shown. This sequence aims to instruct and warn those who work with dentures about the needs of using face bows for correct reproduction of the models positioning in the articulator

Relationship between the morphology of the maxillary central incisor and horizontal and vertical measurements of the face

Purpose: In order to assist in the selection of artificial teeth for complete dentures, this study aimed to assess the relationship between horizontal and vertical measurements of the face and the morphology of the maxillary central incisor. Materials and Methods: This was a study of 50 plaster casts and 100 teleradiographs - 50 in lateral norm and 50 in frontal norm, belonging to 50 individuals, Caucasian, with a naturally optimal occlusion, matching at least four of the six keys of Andrews. Images of the upper central incisors were obtained by scanning the plaster casts (three-dimensional) and subjectively classified by three examiners as oval, triangular or quadrangular. Facial measures (vertical and horizontal) were defined by means of teleradiographs. In order to check inter-examiner agreement on the classification of central incisor, the Kappa test was used. To verify whether data had normal distribution, the Kolmogorov-Smirnov test was used ( P > 0.2) was used. One-way analysis of variance was employed to assess the association between variables (P > 0.05). Results: When vertical measurements were compared with the three incisor shapes, there was no statistically significant difference (P > 0.05): Triangular (0.54), oval (0.63) and quadrangular (0.51). Similarly, no difference (P > 0.05) was found for facial width (139.08, 143.37, 141.65), maxillary width (76.68, 78.99, 76.91) and mandibular width (103.47, 105.50, 103.11). Conclusions: The majority of cases showed that horizontal and vertical measurements of the face cannot be used as a reference for determining the morphology of the maxillary central incisor crown. It is relevant to analyze and compare other morphological structures to improve the oral health-related quality of life for the conventional denture wearer.

A utilização do diagrama individual anatômico objetivo (DIAO) no contorneameento de arcos ortodônticos

A morfologia das arcadas dentárias sobre as bases ósseas é conseguida utilizando-se fios ortodônticos, os quais detêm o potencial de correção das irregularidades dentárias. O presente artigo discute conceitos acerca da morfologia das arcadas dentárias, bem como demonstra a utilização do Diagrama Individual Anatômico Objetivo (DIAO). A premissa básica para o contorneamento dos arcos de nivelamento reside na individualização da forma da arcada dentária, que deve considerar as bases ósseas e o relacionamento entre elas, bem como os objetivos terapêuticos. O contorneamento dos arcos de nivelamento baseado no diagrama individualizado torna prática a rotina ortodôntica por favorecer a constância de forma e garantir a simetria da arcada dentária.

Utilização dos arcos seccionados para o tratamento da má oclusão de classe II, divisão 2

A má oclusão de Classe II divisão 2 é caracterizada pela verticalização dos incisivos superiores. Nesse tipo de má oclusão, é comum a presença de sobremordida profunda e curva de Spee inferior acentuada. O presente artigo ilustra que o tratamento dessa má oclusão pode ser facilitado com o emprego dos arcos seccionados, como por exemplo, o arco utilidade, segundo a técnica Bioprogressiva de Ricketts.