Síntese, caracterizaçao e propriedades catalicas da peneira molecular nanoestruturada modificada com lantanio

The nanostructured molecular sieve SBA-15 was synthesized by the hydrothermal method, and modified with lanthanum with Si/La molar ratios of 25, 50, 75 and 100. The materials were evaluated as catalysts for the cracking of n-hexane model reaction. Type SBA- 15 and LaSBA-15 mesoporous materials were synthesized using tetraetilortosilicato as a source of silica, hydrochloric acid, heptahydrate lanthanum chloride and distilled water. Pluronic P123 triblock. polymer was used as structure template. The syntheses were carried out by 72 hours. The obtained SBA-15 samples were previously analyzed by thermogravimetry, in order to check the conditions of calcination for removal of organic template. Then, the calcined materials were characterized by X-ray diffraction, infrared spectroscopy, adsorption and desorption of nitrogen, scanning electron microscopy and X-ray microanalysis by dispersive energy. The acidity of the samples was determined using adsorption of n-bulinamina and desorption followed by thermogravimetry. It was found that the hydrothermal synthesis method was suitable for the synthesis of the SBA-15 mesoporous materials, with an excellent degree of hexagonal ordering. The reactions of catalytic cracking of n-hexane were carried out using a fixed bed continuous flow microreactor, coupled on-line to a gas chromatograph. From the catalytic evaluation, it was observed that the mesoporous materials containing lanthanum showed different results for the reaction of cracking of nhexane compared to the unmodified mesoporous material SBA-15. As a result of cracking was obtained as main products hydrocarbons in the range of C1 to C5. The catalyst that showed better properties in relation to the acidity and catalytic activity was LaSBA-15 with the ratio Si/La = 50

Sucrose hydrolysis by gelatin-immobilized inulinase from Kluyveromyces marxianus var. bulgaricus

The crude cell-free medium from a culture of Kluyveromyces marxianus var. bulgaricus was immobilized in a gelatin-water support, with an immobilization yield of 82.60% for inulinase activity. The optimum pH for both free and immobilized inulinase was the same (3.5) and the optimum temperatures were 55 degrees C for the free and 60 degrees C for the immobilized enzyme. The Arrhenius plots were linear and activation energies were 56.20 (free enzyme) and 20.27 kj/mol K (immobilized enzyme). The kinetic parameters were calculated by Lineweaver-Burk plots and the V-max and K-m were 37.60 IU/mg protein and 61.83 mM for the free inulinase and 31.45 IU/mg protein and 149.28 mM for the immobilized enzyme, respectively. The operational stability of the immobilized inulinase was studied in a continuous fixed-bed column reactor for 33 days, at the end of which the sucrose conversion was 58.12%. (c) 2008 Elsevier Ltd. All rights reserved.

Desempeño de tanques decantadores de sólidos en un sistema de recirculación para producción de tilapia

To compare the removal efficiency of solids, turbidity and apparent color between a conventional and a column settling tanks in a recirculating aquaculture system (RAS) for tilapia farming. Materials and methods. Tilapia with a stocking density between 30 and 33 kg/m3 were cultured in a RAS consisting of a water level control box, PVC piping system, three plastic tanks for culture, conventional horizontal flow settling tank (Con.ST), column vertical flow settling tank (Col.ST), three phase fluidized bed reactor, oxygen transfer reactor, air compressor, air blower, centrifugal pump. The Con.ST operated at a volume of 1.4 m3 and hydraulic retention time (HRT) of 2.94 h; and was drained weekly for washing and sludge collection, representing a 55%discharge of system water volume. The Col.ST operated with a volume of 0.30 m3 and HRT of 0.553 h. Three daily partial draining operations were executed, representing a discharge of 50% of the system volume. Results. The mean solids removal efficiencies were: 34.01 and 44.44%for total solids; 64.45 and 71.71% for suspended solids; 21.10 and 45.65% volatile solids; 65.51% and 62.79% for turbidity; and 56.37 and 50.91% for apparent color, respectively for Con.ST and Col.ST. Conclusions. The two settling devices are useful on removal of the studied parameters and presented similar performance on turbidity and apparent color removal; however, the Col.ST was more efficient than Con.ST for solids removal, requires less space, less volume and requires less discharge water volume, displaying feasibility for its use on RAS.

Experimental study of bottom feed updraft gasifier

The updraft biomass gasifiers currently available produce a gas with high tar content. For almost all downstream applications a substantial reduction of the tar concentration is required. The gravimetric tar concentration behavior in producer gas, obtained at a modified updraft fixed bed gasifier, was studied. The feedstock feeding system was modified respect to the traditional updraft gasification design in order to decrease the tar concentration in the producer gas; the material is feeding continuously through a conduit in the base of the reactor over the grate. The caloric power of the syngas obtained was slightly lower than the typical value for this type of reactor and the highest efficiency obtained for the woodchip gasification was 77%. The highest tar concentration obtained during the experiments was 1652.7 mg N m-3 during the first our of experiments, comparable with the smaller value reported for the updraft reactors, this value is reduced significantly after the stabilization of the gasification process in the reactor. The smaller value obtained was 21 mg N m-3. © 2013 Elsevier Ltd.

Produção de lipase por fermentação em estado sólido em biorreator de leito fixo

Pós-graduação em Engenharia e Ciência de Alimentos - IBILCE

Imobilização da inulinase de Klyveromyces marxianus var. bulgaricus ATCC 16045: caracterização e produção de açúcar invertido em biorreator

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Efeito da concentração do meio suporte e relação entre áreas no desempenho de reatores aeróbios de leito fluidizado com circulação interna no tratamento de esgoto doméstico

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Produção de carvão ativado a partir da biomassa residual da castanha do Brasil (Bertholletia excelsa L.) para adsorção de cobre (II)

Produziu-se carvão ativado a partir da casca da castanha-do-Brasil (Bertholletia excelsa L.) para ser utilizado na remoção de cobre (II), no processo de adsorção em sistema de batelada. A casca é resíduo do beneficiamento da castanha, que foi coletada, selecionada, lavada em água corrente e depois secada em estufa a 150ºC por 24 h. Os carvões foram carbonizados a 400 ºC por 3 h e ativados termicamente a 800ºC em tempos de 1, 2 e 3 h, quando receberam as respectivas codificaçõesCA1, CA2 e CA3. Depois foram caracterizadas quanto: à área superficial específica, ao volume e tamanho de poros, à difração de raios-X, à microscopia eletrônica de varredura (MEV) acoplada ao EDS(sistema de energia dispersiva por raios-X) e à espectroscopia de infravermelho com transformada de Fourier (FTIR). Ensaios preliminares foram realizados para avaliar a eficiência dos carvões quanto à remoção de cobre (II) em solução sintética de concentração inicial 50 mg L^-1. Como os resultados foram satisfatórios para CA1, CA2 e CA3 (93,43, 97,23 e 96, 92 % para os respectivos carvões), decidiu-se pelo que apresentou maior percentual de remoção. O CA2 foi produzido e caracterizado quanto: às densidades reais e aparentes, à porosidade em leito fixo, ao pH, à umidade (em base úmida), às cinzas, ao carbono fixo e aos grupos funcionais pelo método de Boehm. Realizaram-se ensaios para determinar a eficiência de remoção de cobre (II) quanto à influência do diâmetro da partícula do carvão, ao pH da solução, à influência do tempo de contato e à variação da concentração inicial. Os resultados de maior percentual de remoção foram para o diâmetro 0,595≤D≤1,19mm, pH 5,09, tempo de 5 min e concentrações de 50, 100 e 150mg L^-1.O modelo cinético de adsorção que melhor se ajustou aos dados foi o de pseudo2^a ordem. Os dados experimentais apresentaram bom ajuste aos modelos matemáticos de isotermas de Langmuir e Frendlich. Sendo assim, obteve-se carvão ativado de baixo custo a partir da casca da castanha-do-Brasil a qual apresentou boa eficiência na remoção de cobre (II) (acima de 90 % para maioria das análises) possibilitando também a utilização no tratamento de efluentes.

Modificação da superfície de carvão ativado comercial (CAG) para a aplicação na adsorção de benzeno e tolueno

Neste trabalho estudaram-se as características de superfície de CAG comercial in natura (CA-1) e tratado por (HNO3) (CA-2) e suas aplicações na adsorção de benzeno e tolueno. Caracterização dos adsorventes: área superficial específica - SBET e distribuição de poros (adsorção de N2/77 K), pH (norma ASTM D3838-05), grupos funcionais de superfície (FTIR e método de Boehm). Foram realizados ensaios de adsorção em sistema batelada (25°C/140 rpm/25 minutos) e sistema de coluna em leito fixo, onde as amostras foram quantificadas por cromatografia gasosa com extração por headspace método EPA 0010. A SBET e o volume médio dos poros do adsorvente CA-2 diminuíram com relação aos valores de CA1, bem como o valor do pH. Houve aumento de grupos funcionais ácidos determinados pelo método de Boehm do adsorvente CA-2 em relação ao CA-1, o que foi confirmado pela determinação de FTIR, na qual a intensidade das bandas de absorção foram mais intensas para CA-2. Obtiveram-se percentuais de remoção de benzeno de 92,6 e 93,6 (%) a partir de CA-1 e CA-2, respectivamente, e para tolueno de 93,2 e 94,3 (%) para CA-1 e CA-2. Os dados dos testes cinéticos foram ajustados satisfatoriamente pelo modelo matemático de pseudo-segunda ordem, baseado nos testes estatísticos aplicados, havendo diferenças estatísticas significativas entre o adsorvente tratado (CA-2) e o in natura (CA-1). Realizaram-se ensaios de equilíbrio de adsorção e correlacionaram-se os resultados pela Isoterma de Langmuir, com resposta satisfatória para o referido modelo. A partir do sistema de adsorção em coluna de leito fixo e considerando o maior valor de vazão volumétrica (Q=100 mL/min) utilizado no referido sistema obtiveram-se os resultados mais significativos de adsorção de benzeno e tolueno empregando (CA-2) como adsorvente.

HYGROSCOPIC PROPERTIES OF ORANGE PULP AND PEEL

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Tratamento de efluentes provenientes de abatedouro de bovinos por meio de reator enzimático seguido de reator aeróbio operado em bateladas sequenciais

Brazil has one of the largest cattle herds in the world, so the cattle slaughter is one of the most important economic activities in the Brazilian market. But this activity requires a high demand of water, resulting in serious problems about the correct disposal of wastewater generated in the process. This effluent has a high pollution load, becoming its receiving bodies (streams and rivers) unfit for various activities such as public water supply, recreation, fisheries. To minimize the environmental impacts of its industrial wastewater and fallow the local environmental legislation, refrigerators must make the treatment of these effluents. This study aimed to verify the efficiency of a enzymatic reactor, when occur hydrolysis of lipids present in the effluent industrial of an cattle slaughter industry. The treatment system used was composed of two separate reactors: one being the anaerobic fluidized bed reactor (AFBR), inoculated with immobilized enzymes on the matrix support, and the other by sequential batch reactor (SBR) inoculated with activated sludge. Whereas, the reactors have been developed and installed at the Wastewater Treatment Laboratory, Faculdade de Ciências e Tecnologia, UNESP, campus Presidente Prudente. The procedure operating occurred differently for each reactor: preparation and inoculation of enzyme granules, filling the reactor, hydrolysis, and AFBR emptying, filling, aerobic reaction, sedimentation, and emptying the SBR. We performed three experimental stages, with the first and second stage of the work were done reactor analyzes separately, and the third step of the analysis were made with the interconnected reactors... (Complete abstract electronic access below)

Qualidade e alterações estruturais do café arábica submetido a alternância da temperatura na secagem

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Improvement of water transport and carotenoid retention during drying of papaya by applying ultrasonic osmotic pretreatment

The effect of ultrasound and osmotic dehydration pretreatments on papaya drying kinetics was investigated. The ultrasound pretreatment was carried out in an ultrasonic bath at 30 A degrees C. The osmotic pretreatment in sucrose solution was carried out in an incubator at 34 A degrees C and agitation of 80 rpm for 210 min. The drying process was conducted in a fixed bed dryer at 70 A degrees C. Experimental data were fitted successfully using the Page model for dried fresh and pretreated fruits, with coefficient of determination greater than 0.9992 and average relative error lower that 14.4 %. The diffusional model was used to describe the moisture transfer, and the effective water diffusivity was identified in the order of 10(-9) m(2) s(-1). It was found that drying rates of osmosed fruits were the lowest due to the presence of infused solutes, while the ultrasound pretreatment contributed to faster drying rates. Evaluation of the dried fruit was performed by means of total carotenoids retention. Ultrasound treatments in distilled water prior to air-drying gave rise to dried papayas with retention of carotenoids in the range 30.4-39.8 % and the ultrasonic-assisted osmotic dehydration of papayas showed carotenoids retention values up to 64.9 %, whereas the dried fruit without pretreatment showed carotenoids retention lower than 24 %.

Continuous enzymatic interesterification of milkfat with soybean oil produces a highly spreadable product rich in polyunsaturated fatty acids

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Adsorção de metais em solução aquosa pelos processos de batelada e coluna de leito fixo utilizando silsesquioxano funcionalizado com 5-amino-1,3,4-tiadiazol-2-tiol

Pós-graduação em Ciência dos Materiais - FEIS