976 resultados para ALEPH Order Number
Resumo:
A study has been made on the influence of the leading edge imperfections in airfoils used in different devices relating their aerodynamic performances. Wind tunnel tests have been made at different Reynolds numbers and angle of attacks in order to show this effect. Later, a quantitative study of the aerodynamic properties has been made based on the different leading edge imperfections and their size.
Resumo:
Four periodically time-varying methane–air laminar coflow jet diffusion flames, each forced by pulsating the fuel jet's exit velocity Uj sinusoidally with a different modulation frequency wj and with a 50% amplitude variation, have been computed. Combustion of methane has been modeled by using a chemical mechanism with 15 species and 42 reactions, and the solution of the unsteady Navier–Stokes equations has been obtained numerically by using a modified vorticity-velocity formulation in the limit of low Mach number. The effect of wj on temperature and chemistry has been studied in detail. Three different regimes are found depending on the flame's Strouhal number S=awj/Uj, with a denoting the fuel jet radius. For small Strouhal number (S=0.1), the modulation introduces a perturbation that travels very far downstream, and certain variables oscillate at the frequency imposed by the fuel jet modulation. As the Strouhal number grows, the nondimensional frequency approaches the natural frequency of oscillation of the flickering flame (S≃0.2). A coupling with the pulsation frequency enhances the effect of the imposed modulation and a vigorous pinch-off is observed for S=0.25 and S=0.5. Larger values of S confine the oscillation to the jet's near-exit region, and the effects of the pulsation are reduced to small wiggles in the temperature and concentration values. Temperature and species mass fractions change appreciably near the jet centerline, where variations of over 2% for the temperature and 15% and 40% for the CO and OH mass fractions, respectively, are found. Transverse to the jet movement, however, the variations almost disappear at radial distances on the order of the fuel jet radius, indicating a fast damping of the oscillation in the spanwise direction.
Resumo:
Graphs of second harmonic generation coefficients and electro-optic coefficients (measured by ellipsometry, attenuated total reflection, and two-slit interference modulation) as a function of chromophore number density (chromophore loading) are experimentally observed to exhibit maxima for polymers containing chromophores characterized by large dipole moments and polarizabilities. Modified London theory is used to demonstrated that this behavior can be attributed to the competition of chromophore-applied electric field and chromophore–chromophore electrostatic interactions. The comparison of theoretical and experimental data explains why the promise of exceptional macroscopic second-order optical nonlinearity predicted for organic materials has not been realized and suggests routes for circumventing current limitations to large optical nonlinearity. The results also suggest extensions of measurement and theoretical methods to achieve an improved understanding of intermolecular interactions in condensed phase materials including materials prepared by sequential synthesis and block copolymer methods.
Resumo:
The association of a particular mitochondrial DNA (mtDNA) mutation with different clinical phenotypes is a well-known feature of mitochondrial diseases. A simple genotype–phenotype correlation has not been found between mutation load and disease expression. Tissue and intercellular mosaicism as well as mtDNA copy number are thought to be responsible for the different clinical phenotypes. As disease expression of mitochondrial tRNA mutations is mostly in postmitotic tissues, studies to elucidate disease mechanisms need to be performed on patient material. Heteroplasmy quantitation and copy number estimation using small patient biopsy samples has not been reported before, mainly due to technical restrictions. In order to resolve this problem, we have developed a robust assay that utilizes Molecular Beacons to accurately quantify heteroplasmy levels and determine mtDNA copy number in small samples carrying the A8344G tRNALys mutation. It provides the methodological basis to investigate the role of heteroplasmy and mtDNA copy number in determining the clinical phenotypes.
Resumo:
On a global level the population growth and increase of the middle class lead to a growing demand on material resources. The built environment has an enormous impact on this scarcity. In addition, a surplus of construction and demolition waste is a common problem. The construction industry claims to recycle 95% of this waste but this is in fact mainly downcycling. Towards the circular economy, the quality of reuse becomes of increasing importance. Buildings are material warehouses that can contribute to this high quality reuse. However, several aspects to achieve this are unknown and a need for more insight into the potential for high quality reuse of building materials exists. Therefore an instrument has been developed that determines the circularity of construction waste in order to maximise high quality reuse. The instrument is based on three principles: ‘product and material flows in the end of life phase’, ‘future value of secondary materials and products’ and ‘the success of repetition in a new life cycle’. These principles are further divided into a number of criteria to which values and weighting factors are assigned. A degree of circularity can then be determined as a percentage. A case study for a typical 70s building is carried out. For concrete, the circularity is increased from 25% to 50% by mapping out the potential for high quality reuse. During the development of the instrument it was clarified that some criteria are difficult to measure. Accurate and reliable data are limited and assumptions had to be made. To increase the reliability of the instrument, experts have reviewed the instrument several times. In the long-term, the instrument can be used as a tool for quantitative research to reduce the amount of construction and demolition waste and contribute to the reduction of raw material scarcity.
Resumo:
Norway is currently the only Western European state and ‘old’ NATO member that strongly relies on the traditional dimension of NATO's collective defence. It is also the only ally in Western Europe which perceives Russia as a threat to its military security, in the so-called High North. In order to successfully deal with the potential challenges and threats in the region, Norway has been pursuing a defence policy based on cooperation and deterrence. Cooperation means improving collaboration with Russia in cross-border relations, in the petroleum sector and in the military sphere. The deterrent measures include maintaining NATO’s credibility as a collective defence alliance; increasing military cooperation with the United States; building up Norway’s own military capabilities; and developing military cooperation across Northern Europe. The primary objective of Oslo’s defence policy is to minimise the likelihood of crises and conflicts emerging in the High North which could prove too ‘big’ for Norway but too ‘small’ for NATO.
Resumo:
Viktor Orban’s sweeping victory in the 2010 election ensured his party, Fidesz, a constitutional two-thirds majority in parliament. The party took over the rule of the country from the discredited political left when Hungary was plunged in political and economic crisis. Claiming that the circumstances were unusual and that it had a strong electoral mandate, Fidesz introduced radical changes in the country and thus challenged the previous economic and political order. These changes have led to an unprecedented concentration of power and provoked a discussion on the limits of democracy and the rule of law in the European Union. The state’s economic role has strengthened. The Orban government has been unable to overcome economic stagnation but it has managed to stabilise Hungary’s budget situation, which needs to deal with the high debt. Hungary’s relations with most partners in the EU and NATO have cooled due to controversial moves made by its government. As regards foreign policy and economic co-operation, Orban has granted high priority to the ‘Eastern opening’, where Russia has assumed the leading role.
A weak link? Germany in the Euro-Atlantic security system. OSW Point of View Number 47, January 2015
Resumo:
The political, military and economic parameters of German power influence the vision of the international order that Berlin favours. Politically, Germany is a regional power in the EU with considerable diplomatic potential. Economically, it is the world's third largest power with growing global trade and investment links. At the same time, Germany's military potential is limited and the German strategic culture makes the country sceptical about the use of military instruments. Berlin is thus essentially interested in maintaining peace and stability, both in Europe and globally, and in developing diplomatic mechanisms to manage regional and global crises and conflicts. The German preference for dialogue and compromise in conflict situations in the regional and global dimensions may increasingly pose a risk to maintaining the cohesion and credibility of NATO – both from the perspective of the USA and Germany’s allies from Central-Eastern and Northern Europe.
Resumo:
After many meetings and long hours of negotiations, the overwhelming feeling when a deal between the EU and Turkey was struck, was one of “mission accomplished”! Faced with an unprecedented crisis and forced to appease increasingly hostile public opinions back home, EU leaders had only one objective in mind: reducing the number of migrants arriving in the EU so that order can return in the framework of EU rules. However, a closer look at the Summit Conclusions and the EU-Turkey statement leaves a bitter taste, according to Yves Pascouau. In this Commentary, he questions the feasibility of the final EU-Turkey deal, saying that it creates more problems than it solves: besides the obvious legal and practical issues, it is far from certain which member states will be willing to do their part, or whether or not the EU can come up with a strategic vision on human mobility for the future.
Resumo:
Species coexist using the same nutritional resource by partitioning it either in space or time, but few studies explore how species-specific nutritional requirements allow partitioning. Zaprionus indianus and Drosophila simulans co-exist in figs by invading the fruit at different stages; Z. indianus colonizes ripe figs, whereas D. simulans oviposits in decaying fruit. Larvae feed on yeast growing on the fruit, which serves as their primary protein source. Because yeast populations increase as fruit decays, we find that ripe fruit has lower protein content than rotting fruit. Therefore, we hypothesized that Z. indianus and D. simulans larvae differ in their dietary requirements for protein. We used nutritional geometry to assess the effects of protein and carbohydrate concentration in the larval diet on life history characters in both species. Survival, development time, and ovariole number respond differently to the composition of the larval diet, with Z. indianus generally performing better across a wider range of protein concentrations. Correspondingly, we found that Z. indianus females preferred to lay eggs on low protein foods, while D. simulans females chose higher protein foods for oviposition when competing with Z. indianus. We propose the different nutritional requirements and oviposition preference of these two species allows them to temporally partition their habitat.
Resumo:
Benthic foraminifera from 24 DSDP/ODP sites were investigated to assess their global horizontal and vertical distribution in the deep-sea environment at the end of the Cretaceous period. The samples analyzed are from the late Maastrichtian and within the planktic foraminiferal Abathomphus mayaroensis Zone from a wide range of oceans and paleolatitudes, including the low-latitude Sites 10 and 384 (Atlantic Ocean), 47, 171, 305, and 465 (Pacific Ocean), the mid-latitude Sites 20, 111, 356, 363, 516, 525, 527, 548, and 605 (Atlantic Ocean), 216, 217, and 758 (Indian Ocean), and the high-latitude Sites 208 (Pacific Ocean), 689,698,700,738 and 750 (Southern Ocean). Correspondence analysis, based on the 75 most common taxa, shows a clear biogeographic trend along the first correspondence axis by arranging the sites in paleolatitudinal order. The assemblages from the Tethyan Realm (i.e., low latitudes) are marked by abundant heavily calcified buliminids (such as Bulimina incisa, B. trinitatensis, B. velascoensis, and Reussella szajnochae) and Aragonia spp., whereas high-latitude faunas are characterized by abundant Alabamina creta, Gyroidinoides quadratus, and Pullenia coryelli. The results indicate that the faunas at low and high latitudes, respectively, were influenced by quite different environmental conditions. This is based on the much higher abundance of infaunal morphotypes at low and mid latitudes compared to high latitudes, suggesting that the biogeographic trend found in the data set coincides with the trophic regime at the various sites. The results also provide support for the hypothesis that postulates two simultaneous sources and mechanisms for deep-water formation during the Late Cretaceous, including warm, saline deep water produced by evaporation at low (equatorial) latitudes in contrast to the formation of cold deep waters at high (southern) latitudes.
Resumo:
"Sale number twenty-two."
Resumo:
Mimeographed.
Resumo:
"Sale number 364 ..." -- added t.p.