A series-dynamic-resistor-based converter protection scheme for doubly-fed induction generator during various fault conditions

This paper proposes a new converter protection method, primarily based on a series dynamic resistor (SDR) that avoids the doubly-fed induction generator (DFIG) control being disabled by crowbar protection during fault conditions. A combined converter protection scheme based on the proposed SDR and conventional crowbar is analyzed and discussed. The main protection advantages are due to the series topology when compared with crowbar and dc-chopper protection. Various fault overcurrent conditions (both symmetrical and asymmetrical) are analyzed and used to design the protection in detail, including the switching strategy and coordination with crowbar, and resistance value calculations. PSCAD/EMTDC simulation results show that the proposed method is advantageous for fault overcurrent protection, especially for asymmetrical faults, in which the traditional crowbar protection may malfunction.

Optimization of a 42.7 Gb/s wavelength tunable RZ transmitter using a linear spectrogram technique

The optimization of a wavelength tunable RZ transmitter, consisting of an electro-absorption modulator and a SG DBR tunable laser, is carried out using a linear spectrogram based characterization and leads to 1500 km transmission at 42.7 Gb/s independent of the operating wavelength. We demonstrate that, to ensure optimum and consistent transmission performance over a portion of the C-band, the RF drive and bias conditions of the EAM must be varied at each wavelength. The sign and magnitude of the pulse chirp (characterized using the linear spectrographic technique) is therefore tailored to suit the dispersion map of the transmission link. Results achieved show that by optimizing the drive and DC bias applied to the EAM, consistent transmission performance can be achieved over a wide wavelength range. Failure to optimize the EAM drive conditions at each wavelength can lead to serious degradation in system performance.

Localisation of members of the vascular endothelial growth factor (VEGF) family and their receptors in human atherosclerotic arteries

Background: Vascular endothelial growth factor (VEGF) mediates endothelial cell mitogenesis and enhances vascular permeability. The existence of single or multiple VEGF isoforms and receptors suggests that these proteins may have overlapping but distinct functions, which may be reflected in their cell expression and distribution. Methods: The localisation of VEGFs A–C and their receptors (VEGFRs 1–3, respectively) in 30 fresh human atherosclerotic arteries, 15 normal uterine arteries, and 15 saphenous veins using immunohistochemistry and western blotting. Results: Saphenous veins showed no staining for VEGF-B or VEGFR-2. Smooth muscle cells (SMCs) showed the strongest staining for VEGF-A, VEGF-B, VEGFR-1, and VEGFR-2 in all specimens. Conversely, VEGFR-3 and VEGF-C were predominately localised to the endothelial vasa vasorum in normal arteries, whereas medial SMCs showed the strongest staining in atherosclerotic arteries. Western blotting showed variations in VEGF protein localisation, with lower amounts of VEGF-B and VEGF-C in saphenous veins, compared with arterial tissue. Amounts of VEGF-C were lower than those of VEGF-A and VEGF-B in all specimens. Conclusion: This study provides direct evidence of the presence of VEGF proteins and receptors in human physiology and pathology, with variations in both the amounts of VEGF proteins expressed and their cellular distribution in normal arteries compared with atherosclerotic arteries. The presence of VEGFs A–C and their receptors in normal arterial tissue implies that VEGF functions may extend beyond endothelial cell proliferation. Reduced VEGFR-2 staining in atherosclerotic arteries may have implications for the atherosclerosis process and the development of vascular disease and its complications.

Characterisation of ICAM-3 and extracellular vesicles in the clearance of apoptotic cells

Apoptotic cell clearance by phagocytes is a vital part of programmed cell death that prevents dying cells from undergoing necrosis which may lead to inflammatory and autoimmune disorders. Apoptotic cells (AC) are removed by phagocytes, in a process that involves 'find me' and 'eat me' signals that facilitate the synapsing and engulfment of cell corpses. Extracellular vesicles (EV) are shed during apoptosis and promote phagocyte recruitment. Binding of AC is achieved by multiple ligand-receptor interactions. One interesting AC associated ligand is ICAM-3, a highly glycosylated adhesion molecule of the IgSF family, expressed on human leukocytes. On viable cells ICAM-3 participates in initiating immune responses, whereas on AC we show it attracts phagocytes through EV and aids in the binding of AC to the phagocytes. This project aims to characterize the role of ICAM-3 and EV in the clearance of AC and to identify the mechanisms that underlie their function in apoptotic cell clearance. Human B cells induced to apoptosis by UV irradiation were observed during their progression from viable to apoptotic via flow cytometry. The involvement of ICAM-3 in mediating interaction between AC and MØ was assessed. The ability of ICAM3 on EV to mediate chemoattraction was observed using chemotaxis assays. Additionally the anti-inflammatory effect was assessed using LPS-induced TNF-α production that suggested it may have anti-inflammatory effects. Future work in this project will assess the role of ICAM3 on EV from different phases of apoptosis to exert functional effects both in vitro and in vivo.

Resource-based view and dynamic capabilities - Achieving competitive advantage through internal resources and competences

Strategy has always been important for success. Whether strategy is applied for military purposes, in large firms, or even for personal objectives, there are certain key characteristics that every successful strategy carries on: clear, objective and simple goals; deep knowledge and understanding of the competitive environment; objective understanding and exploitation of resources; and an effective plan implementation. In this paper, the author’s attention will be focused on the role of internal resources, routines and processes as the bases of sustained competitive advantage (hereafter SCA) into what is now known as the resourcebased view of the firm (RBV) and Dynamic Capabilities (DC). First, the relevance of RBV and DC approaches and the main characteristics of those are briefly mentioned. Second, RBV and DC are examined as an important piece to achieve SCA. Later on, the author deepens into some examples and the manager’s importance when using these RBV and DC approaches. Then issues related with complexity and undefined concepts in RBV and DC are briefly mentioned. Finally, conclusions and personal comments are presented.

Social and seasonal plasticity of the electric fish, Brachyhypopomus gauderio

The South American electric knifefish, Brachyhypopomus gauderio, uses weakly electric fields to see and communicate in the dark. Only one study to date has investigated natural behavior in this species during the breeding season; this study proposed that B. guarerio has an exploded lek polygyny breeding system. To test this hypothesis, artificial marshes simulating the native vegetation, temperature, and water conductivities of the South American subtropics were created to study seasonal variation in associative behavior of B. gauderio during the breeding and non-breeding seasons. Mark/recapture methods were used to keep track of individual fish and their dispersion inside the experimental designs. The experimental design proved to be extremely successful at eliciting reproduction. Differences were found in seasonal variations of social behaviors between adult and juvenile populations. Although no apparent sex. differences in movement patterns were found during the breeding season; a trend for male-male aversion was found, suggesting male-male avoidance as a possible strategy guiding aspects of social behaviors in this species. Further, movement may be a tactic for mate seeking as the individuals who moved the most during the breeding season obtained the most opposite sex interactions. These findings support the exploded lek polygyny model. Social interactions are subject to complex regulation by social, physiologic and ecological factors; the extent to which these associations are repeatable may provide novel insights on the evolution of sociality as it has been shaped by natural selection.

Design optimization of modern machine drive systems for maximum fault tolerant and optimal operation

Modern electric machine drives, particularly three phase permanent magnet machine drive systems represent an indispensable part of high power density products. Such products include; hybrid electric vehicles, large propulsion systems, and automation products. Reliability and cost of these products are directly related to the reliability and cost of these systems. The compatibility of the electric machine and its drive system for optimal cost and operation has been a large challenge in industrial applications. The main objective of this dissertation is to find a design and control scheme for the best compromise between the reliability and optimality of the electric machine-drive system. The effort presented here is motivated by the need to find new techniques to connect the design and control of electric machines and drive systems. ^ A highly accurate and computationally efficient modeling process was developed to monitor the magnetic, thermal, and electrical aspects of the electric machine in its operational environments. The modeling process was also utilized in the design process in form finite element based optimization process. It was also used in hardware in the loop finite element based optimization process. The modeling process was later employed in the design of a very accurate and highly efficient physics-based customized observers that are required for the fault diagnosis as well the sensorless rotor position estimation. Two test setups with different ratings and topologies were numerically and experimentally tested to verify the effectiveness of the proposed techniques. ^ The modeling process was also employed in the real-time demagnetization control of the machine. Various real-time scenarios were successfully verified. It was shown that this process gives the potential to optimally redefine the assumptions in sizing the permanent magnets of the machine and DC bus voltage of the drive for the worst operating conditions. ^ The mathematical development and stability criteria of the physics-based modeling of the machine, design optimization, and the physics-based fault diagnosis and the physics-based sensorless technique are described in detail. ^ To investigate the performance of the developed design test-bed, software and hardware setups were constructed first. Several topologies of the permanent magnet machine were optimized inside the optimization test-bed. To investigate the performance of the developed sensorless control, a test-bed including a 0.25 (kW) surface mounted permanent magnet synchronous machine example was created. The verification of the proposed technique in a range from medium to very low speed, effectively show the intelligent design capability of the proposed system. Additionally, to investigate the performance of the developed fault diagnosis system, a test-bed including a 0.8 (kW) surface mounted permanent magnet synchronous machine example with trapezoidal back electromotive force was created. The results verify the use of the proposed technique under dynamic eccentricity, DC bus voltage variations, and harmonic loading condition make the system an ideal case for propulsion systems.^

Home based exercise programme for knee pain and knee osteoarthritis: randomised controlled trial

Objectives To determine whether a home based exercise programme can improve outcomes in patients with knee pain. Design Pragmatic, factorial randomised controlled trial of two years' duration. Setting Two general practices in Nottingham. Participants 786 men and women aged >45 years with self reported knee pain. Interventions Participants were randomised to four groups to receive exercise therapy, monthly telephone contact, exercise therapy plus telephone contact, or no intervention. Patients in the no intervention and combined exercise and telephone groups were randomised to receive or not receive a placebo health food tablet. Main outcome measures Primary outcome was self reported score for knee pain on the Western Ontario and McMaster universities (WOMAC) osteoarthritis index at two years. Secondary outcomes included knee specific physical function and stiffness (scored on WOMAC index), general physical function (scored on SF­36 questionnaire), psychological outlook (scored on hospital anxiety and depression scale), and isometric muscle strength. Results 600 (76.3%) participants completed the study. At 24 months, highly significant reductions in knee pain were apparent for the pooled exercise groups compared with the non­exercise groups (mean difference –0.82, 95% confidence interval –1.3 to –0.3). Similar improvements were observed at 6, 12, and 18 months. Regular telephone contact alone did not reduce pain. The reduction in pain was greater the closer patients adhered to the exercise plan. Conclusions A simple home based exercise programme can significantly reduce knee pain. The lack of improvement in patients who received only telephone contact suggests that improvements are not just due to psychosocial effects because of contact with the therapist.

Nutritional status and its impact on time and relocation in postoperative complications of abdominal patients undergoing surgery

Introduction: The nutritional state is the independent factor that most influences the post-operational results in elective surgeries. Objective: to evaluate the influence of the nutritional state on the hospitalization period and on the post-operative complications of patients submitted to abdominal surgery. Methods: prospective study with 99 surgical patients over 18 years of age, submitted to abdominal surgeries in the period from April to October of 2013, in the Instituto de Medicina Integral Professor Fernando Figueira (IMIP). All patients were submitted to anthropometric nutritional evaluations through the body mass Index (BMI), arm circumference (AC) and triceps skinfold thickness (TEST). The biochemical evaluation was carried out from the leukogram and serum albumin results. The identification of candidate patients to nutritional therapy (NT) was carried out through the nutritional risk (NR) evaluation by using the BMI, loss of weight and hypoalbuminemia. The information about post-operational complications, hospitalization period and clinical diagnosis was collected from the medical records. Program SPSS version 13.0 and significance level of 5% were used for the statistical analysis. Results: The malnutrition diagnosed by the AC showed significant positive association with the presence of post-operative complications (p=0.02) and with hospitalization period (p=0.02). The presence of NR was greater when evaluated by hypoalbuminemia (28.9%), however, only 4% of the sample carried out the NT in the pre-operational period. The hospitalization period was greater for patients with malignant neoplasia (p<0.01). Conclusion: The malnutrition diagnosis of patients submitted to abdominal surgeries is associated to greater risk of post-operational complications and longer hospitalization permanence.

Radio Frequency Superconducting Quantum Interference Device Meta-atoms and Metamaterials: Experiment, Theory, and Analysis

Metamamterials are 1D, 2D or 3D arrays of articial atoms. The articial atoms, called "meta-atoms", can be any component with tailorable electromagnetic properties, such as resonators, LC circuits, nano particles, and so on. By designing the properties of individual meta-atoms and the interaction created by putting them in a lattice, one can create a metamaterial with intriguing properties not found in nature. My Ph. D. work examines the meta-atoms based on radio frequency superconducting quantum interference devices (rf-SQUIDs); their tunability with dc magnetic field, rf magnetic field, and temperature are studied. The rf-SQUIDs are superconducting split ring resonators in which the usual capacitance is supplemented with a Josephson junction, which introduces strong nonlinearity in the rf properties. At relatively low rf magnetic field, a magnetic field tunability of the resonant frequency of up to 80 THz/Gauss by dc magnetic field is observed, and a total frequency tunability of 100% is achieved. The macroscopic quantum superconducting metamaterial also shows manipulative self-induced broadband transparency due to a qualitatively novel nonlinear mechanism that is different from conventional electromagnetically induced transparency (EIT) or its classical analogs. A near complete disappearance of resonant absorption under a range of applied rf flux is observed experimentally and explained theoretically. The transparency comes from the intrinsic bi-stability and can be tuned on/ off easily by altering rf and dc magnetic fields, temperature and history. Hysteretic in situ 100% tunability of transparency paves the way for auto-cloaking metamaterials, intensity dependent filters, and fast-tunable power limiters. An rf-SQUID metamaterial is shown to have qualitatively the same behavior as a single rf-SQUID with regards to dc flux, rf flux and temperature tuning. The two-tone response of self-resonant rf-SQUID meta-atoms and metamaterials is then studied here via intermodulation (IM) measurement over a broad range of tone frequencies and tone powers. A sharp onset followed by a surprising strongly suppressed IM region near the resonance is observed. This behavior can be understood employing methods in nonlinear dynamics; the sharp onset, and the gap of IM, are due to sudden state jumps during a beat of the two-tone sum input signal. The theory predicts that the IM can be manipulated with tone power, center frequency, frequency difference between the two tones, and temperature. This quantitative understanding potentially allows for the design of rf-SQUID metamaterials with either very low or very high IM response.

A Thermal Management Solution for Compact Power Converters

Regulated Transformer Rectifier Units contain several power electronic boards to facilitate AC to DC power conversion. As these units become smaller, the number of devices on each board increases while their distance from each other decreases, making active cooling essential to maintaining reliable operation. Although it is widely accepted that liquid is a far superior heat transfer medium to air, the latter is still capable of yielding low device operating temperatures with proper heat sink and airflow design. The purpose of this study is to describe the models and methods used to design and build the thermal management system for one of the power electronic boards in a compact, high power regulated transformer rectifier unit. Maximum device temperature, available pressure drop and manufacturability were assessed when selecting the final design for testing. Once constructed, the thermal management system’s performance was experimentally verified at three different power levels.

Design Optimization of Modern Machine-drive Systems for Maximum Fault Tolerant and Optimal Operation

Modern electric machine drives, particularly three phase permanent magnet machine drive systems represent an indispensable part of high power density products. Such products include; hybrid electric vehicles, large propulsion systems, and automation products. Reliability and cost of these products are directly related to the reliability and cost of these systems. The compatibility of the electric machine and its drive system for optimal cost and operation has been a large challenge in industrial applications. The main objective of this dissertation is to find a design and control scheme for the best compromise between the reliability and optimality of the electric machine-drive system. The effort presented here is motivated by the need to find new techniques to connect the design and control of electric machines and drive systems. A highly accurate and computationally efficient modeling process was developed to monitor the magnetic, thermal, and electrical aspects of the electric machine in its operational environments. The modeling process was also utilized in the design process in form finite element based optimization process. It was also used in hardware in the loop finite element based optimization process. The modeling process was later employed in the design of a very accurate and highly efficient physics-based customized observers that are required for the fault diagnosis as well the sensorless rotor position estimation. Two test setups with different ratings and topologies were numerically and experimentally tested to verify the effectiveness of the proposed techniques. The modeling process was also employed in the real-time demagnetization control of the machine. Various real-time scenarios were successfully verified. It was shown that this process gives the potential to optimally redefine the assumptions in sizing the permanent magnets of the machine and DC bus voltage of the drive for the worst operating conditions. The mathematical development and stability criteria of the physics-based modeling of the machine, design optimization, and the physics-based fault diagnosis and the physics-based sensorless technique are described in detail. To investigate the performance of the developed design test-bed, software and hardware setups were constructed first. Several topologies of the permanent magnet machine were optimized inside the optimization test-bed. To investigate the performance of the developed sensorless control, a test-bed including a 0.25 (kW) surface mounted permanent magnet synchronous machine example was created. The verification of the proposed technique in a range from medium to very low speed, effectively show the intelligent design capability of the proposed system. Additionally, to investigate the performance of the developed fault diagnosis system, a test-bed including a 0.8 (kW) surface mounted permanent magnet synchronous machine example with trapezoidal back electromotive force was created. The results verify the use of the proposed technique under dynamic eccentricity, DC bus voltage variations, and harmonic loading condition make the system an ideal case for propulsion systems.

Parental Adjustment to Disability, Stress Indicators and the Influence of Social Support

Research into families of children and young people with disability maintain that parents or caregivers seem to experience higher levels of global stress than parents of children without disabilities, thereby presenting a high risk of developing disorders in their health and quality of life. The aim of this study is to understand the differences in parental stress and social support among groups of parents whose children have different disabilities in the context of parental adjustment to disability. Considering that adjustment is related to the effectiveness with which the family uses its resources and the support of their social network, we intend to analyse the differences of stress and social support among groups of parents of children with different problems and to clarify the relationships between the variables under study in order to adapt family intervention strategies. For this purpose a comparative, descriptive-correlational study was undertaken. The convenience sample included 152 parents of children with different disabilities (82 with intellectual disability, 37 with motor problems and 33 with autism) supported by schools and institutions in Viseu. The instruments used were: a Portuguese version of the Parenting Stress Index (Abidin, 1995), the Social Support Questionnaire – short version (Pinheiro & Ferreira, 2001) and a Parental Questionnaire (demographic and family data). Data were collected in schools and institutions that support people with disabilities, located in the Municipality of Viseu (Portugal). The results revealed significant differences between groups of parents in the partial results of parental stress, specifically in the Hyperactivity/Distract (DI), Acceptability (AC) and Adaptability (AD), dimensions of the Child Domain subscale (CD stress) and the Role Restriction (RO), dimension of Parent Domain subscale (PD stress). With regard to social support dimensions, we found significant differences between parents in the extent and availability of the social support network (SSQN).

The impact of personal background and school contextual factors on academic competence and mental health functioning across the primary-secondary school transition

Students negotiate the transition to secondary school in different ways. While some thrive on the opportunity, others are challenged. A prospective longitudinal design was used to determine the contribution of personal background and school contextual factors on academic competence (AC) and mental health functioning (MHF) of 266 students, 6-months before and after the transition to secondary school. Data from 197 typically developing students and 69 students with a disability were analysed using hierarchical linear regression modelling. Both in primary and secondary school, students with a disability and from socially disadvantaged backgrounds gained poorer scores for AC and MHF than their typically developing and more affluent counterparts. Students who attended independent and mid-range sized primary schools had the highest concurrent AC. Those from independent primary schools had the lowest MHF. The primary school organisational model significantly influenced post-transition AC scores; with students from Kindergarten--Year 7 schools reporting the lowest scores, while those from the Kindergarten--Year 12 structure without middle school having the highest scores. Attending a school which used the Kindergarten--Year 12 with middle school structure was associated with a reduction in AC scores across the transition. Personal background factors accounted for the majority of the variability in post-transition AC and MHF. The contribution of school contextual factors was relatively minor. There is a potential opportunity for schools to provide support to disadvantaged students before the transition to secondary school, as they continue to be at a disadvantage after the transition.

Mortalidade feminina por hipertensão: análise por causas múltiplas

INTRODUÇÃO: A prevalência da hipertensão arterial vem crescendo no país, constituindo-se em um problema de saúde pública por sua magnitude e dificuldades no controle. OBJETIVO: Avaliar a qualidade dos dados sobre hipertensão como causa de morte e verificar o ganho de informação na mortalidade por hipertensão arterial de mulheres de 10 a 49 anos, por meio da metodologia de análise por causas múltiplas de morte. MATERIAL E MÉTODOS: Foi constituída uma base de dados com 7.332 óbitos ocorridos no primeiro semestre de 2002 pertencentes ao "Estudo da Morbi-Mortalidade de Mulheres de 10 a 49 anos". A metodologia RAMOS (Reproductive Age Mortality Survey) foi aplicada em todas as capitais de Estados brasileiros e Distrito Federal. Com as informações adicionais, foi preenchida uma nova declaração de óbito - DO-NOVA. Foram analisados dois conjuntos de dados (DO-ORIGINAL - antes da investigação - e DO-NOVA - após resgate das informações. Foram realizadas comparações segundo causas básicas e múltiplas por fontes dos dados (DO-O, DO-N). RESULTADOS E CONCLUSÃO: A DO-ORIGINAL apresentou algumas falhas quantitativas e qualitativas. Concluiu-se que a análise por causas múltiplas enriquece a informação, com base nas DO. São necessárias ações contínuas para um melhor preenchimento da DO, pelos médicos, e deve haver mais estudos que adotem a metodologia de causas múltiplas.