Är teknikämnet efter över 20 år med egen kursplanpå väg att etablera sig i årskurs 1-3? : Åtta lärares beskrivning av sin planering och undervisning iteknik

Studien har haft som syfte att undersöka hur lärare i årskurs 1-3 planerar och genomförundervisning i teknik. Frågeställningarna som tagits fram för att för att få svar på studiens syfteär: hur beskriver lärarna att de planerar för teknikämnet, allmänt och i relation till det centralainnehållet för årskurs 1-3?, hur beskriver lärarna att de undervisar relaterat till det centralainnehållet i teknik för årskurs 1-3? samt vilka undervisningsmetoder används, enligt lärarna?Dessa frågor har det sökts svar på genom kvalitativa intervjuer med åtta lärare i årskurs 1-3.I resultatet framkommer att teknik är ett ämne som inte fullt ut har fått fäste i årskurs 1-3, då detvisar sig att flera lärare i studien saknar förtrogenheten med ämnets kursplan och planering ochundervisning beskrivs till stor del bedrivas tillsammans med No-ämnena. Teknikämnet har haften egen kursplan i tjugo år. Trots detta saknas på många skolor lärare med utbildning i tekniksamt material. Det framgår dock också i resultatet att några av de intervjuade lärarna ärintresserade och väl insatt i ämnets kursplan, även material i form av Skellefte-tekniken och NTAanvänds av flertalet av lärarna i studien. Teknikämnet behöver stärkas ytterligare som eget ämneoch i högre utsträckning undervisas separat för att ge eleverna en god uppfattning av vad som är teknik

Finite-Element Analysis of Stress on Dental Implant Prosthesis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Dynamics of glyphosate-induced conformational changes of Mycobacterium tuberculosis 5-enolpyruvylshikimate-3-phosphate synthase (EC 2.5.1.19) determined by hydrogen-deuterium exchange and electrospray mass spectrometry

The enzyme 5-enolpyruvylshikimate-3-phosphate synthase (EPSPS) catalyzes the reaction between shikimate 3-phosphate and phosphoenolpyruvate to form 5-enolpyruvylshikimate 3-phosphate, an intermediate in the shikimate pathway, which leads to the biosynthesis of aromatic amino acids. EPSPS exists in an open conformation in the absence of substrates and/or inhibitors and in a closed conformation when bound to the substrate and/or inhibitor. In the present report, the H/D exchange properties of EPSPS from Mycobacterium tuberculosis (Mt) were investigated for both enzyme conformations using ESI mass spectrometry and circular dichroism (CD). When the conformational changes identified by H/D exchanges were mapped on the 3-D structure, it was observed that the apoenzyme underwent extensive conformational changes due to glyphosate complexation, characterized by an increase in the content of alpha-helices from 40% to 57%, while the beta-sheet content decreased from 30% to 23%. These results indicate that the enzyme underwent a series of rearrangements of its secondary structure that were accompanied by a large decrease in solvent access to many different regions of the protein. This was attributed to the compaction of 71% of alpha-helices and 57% of beta-sheets as a consequence of glyphosate binding to the enzyme. Apparently, MtEPSPS undergoes a series of inhibitor-induced conformational changes, which seem to have caused synergistic effects in preventing solvent access to the core of molecule, especially in the cleft region. This may be part of the mechanism of inhibition of the enzyme, which is required to prevent the hydration of the substrate binding site and also to induce the cleft closure to avoid entrance of the substrates.

Bacterial cellulose/poly(3-hydroxybutyrate) composite membranes

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Load torque estimation in induction motors using artificial neural networks

The induction motors are largely used in several industry sectors. The dimensioning of an induction motor has still been inaccurate because in most of the cases the load behavior in its shaft is completely unknown. The proposal of this paper is to use artificial neural networks as tool for dimensioning of induction motors rather than conventional methods, which use classical identification techniques and mechanical load modeling. Simulation results are also presented to validate the proposed approach.

EFFECT OF DROUGHT AND DEFOLIATION STRESS IN THE FIELD ON SOYBEAN SEED-GERMINATION AND VIGOR

Although drought and defoliation stress have been shown to reduce soybean [Glycine max (L.). Merr.] yield, little information has been published regarding their effects on soybean seed quality. Field experiments were conducted in 1986, 1987, and 1989 to evaluate the effect of drought and defoliation (1989 only) stress during soybean seed development on seed germination and vigor. Essex (MG [maturity group] V) and Union (MG III) were grown in 1986 and 1987, and Harper (MG III) and McCall (MG 00) in 1989. Moisture treatments were either well watered or drought stressed during seed development (R5 to R7). In 1989, a total defoliation treatment was also imposed at R6 as an additional stress factor. There were significant reductions in yield and yield components following drought stress in all 3 yr and following defoliation in 1989. Leaf conductance and transpiration also decreased in the drought stress treatments. There was no effect of drought stress on seed germination or seed vigor as measured by accelerated aging germination and the cold test across the four cultivars (determinate and indeterminate) and 3 yr. In 1989 slight changes in 3-d germination and conductivity occurred for some drought stress treatments. Most of this response, however, was related to increased occurrence of hard seed, which does not represent an indication of a change in vigor. Seed germination and vigor were significantly reduced for small, flat, shriveled, and underdeveloped seeds that only occurred following defoliation. These seeds represented a small portion of the seed lot that would normally be removed during conditioning. The data suggest that drought stress would have no effect on seed germination or vigor, unless the stress was severe enough to produce shriveled, flat, underdeveloped seeds.

Structural characterization of the cell wall D-glucans isolated from the mycelium of Botryosphaeria rhodina MAMB-05

Three D-glucans were isolated from the mycelium of the fungus Botryosphaeria rhodina MAMB-05 by sequential extraction with hot-water and hot aqueous KOH (2% w/v) followed by ethanol precipitation. Following their purification by gel permeation chrornatography on Sepharose CL-4B, the structural characteristics of the D-glucans were determined by FT-IR and C-13 NMR spectroscopy and, after methylation, by GC-MS. The hot-water extract produced a fraction designated Q(1A) that was a beta-(1 -> 6)-D-glucan with the following structure:[GRAPHICS]The alkaline extract, when subjected to repeated freeze-thawing, yielded two fractions: KIP (insoluble) that comprised a beta-(1 -> 3)-D-glucan with beta-D-glucose branches at C-6 with the structure:[GRAPHICS]and K1SA (soluble) consisting of a backbone chain of alpha-(1 -> 4)-linked D-glucopyranosyl residues substituted at O-6 with alpha-D-glucopyranosyl residues:[GRAPHICS](c) 2008 Elsevier Ltd. All rights reserved.

Micromechanics of dentin/adhesive interface in function of dentin depth: 3d finite element analysis

Objectives: The aim of this study was to analyze the stress distribution on dentin/adhesive interface (d/a) through a 3-D finite element analysis (FEA) varying the number and diameter of the dentin tubules orifice according to dentin depth, keeping hybrid layer (HL) thickness and TAǴs length constant. Materials and Methods: 3 models were built through the SolidWorks software: SD - specimen simulating superficial dentin (41 x 41 x 82 μm), with a 3 μm thick HL, a 17 μm length Tag, and 8 tubules with a 0.9 μm diameter restored with composite resin. MD - similar to M1 with 12 tubules with a 1.2 μm diameter, simulating medium dentin. DD - similar to M1 with 16 tubules with a 2.5 μm diameter, simulating deep dentin. Other two models were built in order to keep the diameter constant in 2.5 μm: MS - similar to SD with 8 tubules; and MM - similar to MD with 12 tubules. The boundary condition was applied to the base surface of each specimen. Tensile load (0.03N) was performed on the composite resin top surface. Stress field (maximum principal stress in tension - σMAX) was performed using Ansys Wokbench 10.0. Results: The peak of σMAX (MPa) were similar between SD (110) and MD (106), and higher for DD (134). The stress distribution pathway was similar for all models, starting from peritubular dentin to adhesive layer, intertubular dentin and hybrid layer. The peak of σMAX (MPa) for those structures was, respectively: 134 (DD), 56.9 (SD), 45.5 (DD), and 36.7 (MD). Conclusions: The number of dentin tubules had no influence in the σMAX at the dentin/adhesive interface. Peritubular and intertubular dentin showed higher stress with the bigger dentin tubules orifice condition. The σMAX in the hybrid layer and adhesive layer were going down from superficial dentin to deeper dentin. In a failure scenario, the hybrid layer in contact with peritubular dentin and adhesive layer is the first region for breaking the adhesion. © 2011 Nova Science Publishers, Inc.

Fractografia quantitativa de superfícies obtidas em ensaios de propagação de trincas por fadiga em aço inoxidável 15 –5PH

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Sistemas adesivos autocondicionantes: estudo micromecânico da interface de união através do método dos elementos finitos tridimensional

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Migração (2,5-D) com amplitudes verdadeiras em meios com gradiente constante de velocidade

A migração com amplitudes verdadeiras de dados de reflexão sísmica, em profundidade ou em tempo, possibilita que seja obtida uma medida dos coeficientes de reflexão dos chamados eventos de reflexão primária. Estes eventos são constituídos, por exemplo, pelas reflexões de ondas longitudinais P-P em refletores de curvaturas arbitrárias e suaves. Um dos métodos mais conhecido é o chamado migração de Kirchhoff, através do qual a imagem sísmica é produzida pela integração do campo de ondas sísmicas, utilizando-se superfícies de difrações, denominadas de Superfícies de Huygens. A fim de se obter uma estimativa dos coeficientes de reflexão durante a migração, isto é a correção do efeito do espalhamento geométrico, utiliza-se uma função peso no operador integral de migração. A obtenção desta função peso é feita pela solução assintótica da integral em pontos estacionários. Tanto no cálculo dos tempos de trânsito como na determinação da função peso, necessita-se do traçamento de raios, o que torna a migração em situações de forte heterogeneidade da propriedade física um processo com alto custo computacional. Neste trabalho é apresentado um algoritmo de migração em profundidade com amplitudes verdadeiras, para o caso em que se tem uma fonte sísmica pontual, sendo o modelo de velocidades em subsuperfície representado por uma função que varia em duas dimensões, e constante na terceira dimensão. Esta situação, conhecida como modelo dois-e-meio dimensional (2,5-D), possui características típicas de muitas situações de interesse na exploração do petróleo, como é o caso da aquisição de dados sísmicos 2-D com receptores ao longo de uma linha sísmica e fonte sísmica 3-D. Em particular, é dada ênfase ao caso em que a velocidade de propagação da onda sísmica varia linearmente com a profundidade. Outro tópico de grande importância abordado nesse trabalho diz respeito ao método de inversão sísmica denominado empilhamento duplo de difrações. Através do quociente de dois empilhamentos com pesos apropriados, pode-se determinar propriedades físicas e parâmetros geométricos relacionados com a trajetória do raio refletido, os quais podem ser utilizados a posteriori no processamento dos dados sísmicos, visando por exemplo, a análise de amplitudes.

Modelagem de eletrorresistividade 2-D a partir do potencial elétrico secundário

Um dos métodos clássicos da geofísica de exploração é o Método de Eletrorresistividade, estabelecido há um século pelos irmãos Schlumberger e desde então amplamente empregado em prospecção mineral, estudos ambientais e hidrogeologia e em pesquisa de fontes geotermais. Conceitualmente o método consiste de injeção de corrente elétrica na subsuperfície e de medida de diferença de potencial elétrico, resultante da interação da corrente com o meio. As localizações dessas fontes e receptores são determinadas pelo arranjo escolhido para o levantamento. Após o processamento, obtém-se pseudo-seções de resistividade aparente que indicam a distribuição de condutividade em subsuperfície. Devido à simplicidade dos fundamentos físicos de sua formulação, o método apresenta fácil implementação computacional quando comparado aos métodos eletromagnéticos de fonte controlada. Na literatura há inúmeros trabalhos de modelagem computacional, onde se calcula a resposta para problemas 2-D e 3-D. Nestes trabalhos, as pseudo-seções são obtidas a partir do cálculo do potencial elétrico total. Neste trabalho, apresentaremos a resposta da modelagem de eletroresistividade 2-D com o arranjo dipolo-dipolo, obtida a partir do potencial elétrico secundário. A solução é calculada através do método de elementos finitos usando malhas não estruturadas. Para efeito de validação, os resultados são comparados com a resposta 2-D obtida a partir dos potencias totais.

Production of β-(1,3)-glucanases by Trichoderma harzianum Rifai: Optimization and Application to Produce Gluco-oligosaccharides from Paramylon and Pustulan

β-(1→3)-Glucanases were produced by Trichoderma harzianum Rifai PAMB-86 cultivated on botryosphaeran in a bench-fermenter and optimised by the response surface method. Maximal enzyme titres occurred at 5 days, initial pH 5.5 and aeration of 1.5vvm. β-(1→3)-The β-glucanolytic enzyme complex produced by T. harzianum Rifai PAMB- 86 was fractionated by gel filtration into 2 fractions (F-I, F-II), and employed to produce gluco-oligosaccharides from algal paramylon ((1→3)-β-D-glucan) and lichen pustulan ((1→6)-β-D-glucan). Both enzymes attacked paramylon to the extent of ~15-20% in 30 min releasing glucose and laminaribiose as major end-products, and laminarioligosaccharides of degree of polymerization (DP) ≥3. Only F-I degraded pustulan resulting in ~2% degradation at 30 min, with glucose, gentiobiose and gentio-oligosaccharides of DP ≥4 as major products. The difference in the nature of the hydrolysis products can be explained by the substrate specificities of each enzyme fraction, and the structural differences of the β-D-glucans attacked.

Influência do material oclusal na distribuição de tensões em próteses implantossuportadas unitárias

Objective: the aim of this study was to evaluate the influence of occlusal veneering material in single fixed implant-supported crowns through the 3-D finite element method. Material and methods: Four models were fabricated using the Rhinoceros 4.0, SolidWorks, and InVesalius softwares. Each model represented a block of mandibular bone with an external hexagon implant of 5 mm x 10 mm and different veneering materials including NiCr (1), porcelain (2), composite resin (3), and acrylic resin (4). An axial load of 200 N and an oblique load of 100 N were applied. Results: model (2) with porcelain veneering presented a lower stress concentration for the NiCr framework, followed by the composite resin and acrylic resin. The stress distribution to the implant and bone tissue was similar for all models. Conclusions: there is no difference of stress distribution to the implant and supporting structures by varying the veneering material of a single implant-supported prosthesis.

Influência do material oclusal na distribuição de tensões em próteses implantossuportadas unitárias

Objective: the aim of this study was to evaluate the influence of occlusal veneering material in single fixed implant-supported crowns through the 3-D finite element method. Material and methods: Four models were fabricated using the Rhinoceros 4.0, SolidWorks, and InVesalius softwares. Each model represented a block of mandibular bone with an external hexagon implant of 5 mm x 10 mm and different veneering materials including NiCr (1), porcelain (2), composite resin (3), and acrylic resin (4). An axial load of 200 N and an oblique load of 100 N were applied. Results: model (2) with porcelain veneering presented a lower stress concentration for the NiCr framework, followed by the composite resin and acrylic resin. The stress distribution to the implant and bone tissue was similar for all models. Conclusions: there is no difference of stress distribution to the implant and supporting structures by varying the veneering material of a single implant-supported prosthesis.