Interaction of melittin with endotoxic lipid

Several amphipathic and cationic substances are known to bind lipid A, the toxic component of bacterial lipopolysaccharides. In this report, we have characterized, by fluorescence methods, the interaction of melittin, an amphipathic and basic 26-residue polypeptide isolated from bee venom, with lipid A. The stoichiometry of the complex appears to be two molecules of melittin to one of lipid A with a dissociation constant of 2.5 × 10 −6 M. The binding of melittin not only modifies the endotoxic properties of lipid A in a number of biological assays, but also results in abrogation of the hemolytic activity of melittin. A model of the complex is proposed based on the known structures of lipid A and melittin, and the observed stoichiometry of binding.

Influence of microstructure on the wear of grinding media

Owing to the complexity of the wear process, high stress grinding abrasion is quite different from two-body abrasive wear. Reported data on two-body abrasive wear reveal that the wear decreases with an increase in steel hardness. This relationship can be established without having to consider the microstructure of the steel grinding medium. However, it is known that hardness cannot be directly employed to predict the wear of steel balls under three-body grinding abrasion, as occurs during dry grinding of ores in ball mills. The present work suggests that the wear behaviour of grinding balls can be classified according to the microstructural family to which they belong. Thus, in this work on AISI 52100 steel, the separate groups of microstructures were spheroidite—pearlite, bainite, tempered martensite and martensite with retained austenite. It appears that wear behaviour of the first three groups follows the same trend as that observed for two-body wear. The data suggest that an optimum level of retained austenite could improve the wear resistance of microstructures containing martensite.

Policy analysis and integrated land use.

XVIII IUFRO World Congress, Ljubljana 1986.

Päivikin sadusta Metsolan lapsiin : Aili Somersalon lastenkirjojen nimistö 1910-luvulta 1950-luvulle

Tutkielmassa selvitetään, millaiset piirteet ovat tyypillisiä Aili Somersalon kirjoittamien satuteosten nimistölle. Tarkasteltavana on 274 nimeä, jotka on poimittu kymmenestä Somersalon vuosina 1918 1951 julkaistusta lastenkirjasta. Nimiaineisto on jaettu kuuteen eri kategoriaan: ihmisten nimiin, eläinten nimiin, kuvitteellisiin nimiin, fantastisten satuolentojen nimiin, paikannimiin ja lainanimiin. Tutkielmassa keskitytään nimien rakenteellisten piirteiden ja funktioiden erittelyyn. Tämän lisäksi pohditaan, kuinka nimet ovat motivoituneet ja muuttuuko kirjailijan nimenanto vuosikymmenten aikana. Tutkielmassa sivutaan myös nimen ja nimityksen välistä rajaa sekä kyseenalaistetaan iso alkukirjain proprin tunnusmerkkinä kaunokirjallisessa kontekstissa. Aineiston nimille tyypillisiä rakenteellisia piirteitä ovat yksinimisyys, yhdysnimirakenne ja nimien kaksiosaisuus, appellatiivisuus ja adjektiivien esiintyminen nimenä tai nimenosana, johtimien käyttö sekä erilaiset äänteelliset piirteet. Nimen perustehtävän, identifioinnin, lisäksi aineiston nimet pyrkivät kuvailemaan, luokittelemaan ja lokalisoimaan tarkoitteitaan. Vuosikymmenten aikana teosten nimimäärä kasvaa maltillisesti. Teosten sisältämissä konventionaalisissa nimissä näkyy kulloisenkin vuosikymmenen nimimuoti. Merkillepantavaa on myös teoksissa esiintyvä hahmojen samanimisyys. Mielenkiintoisen lisän analyysiin tuovat aineiston lainanimet, jotka ovat peräisin paitsi universaalista satuperinteestä, myös suomalaisesta kansanmytologiasta ja Kalevalasta. Kansallisromanttisuus näkyy myös teoksiin valikoituneissa konventionaalisissa nimissä, joista suuri osa on omakielisiä. Kirjailija on lainannut teoksiinsa nimiä myös omasta elämänpiiristään. Somersalon nimenmuodostus nojaa vahvasti leksikkoon. Aineiston nimien ja nimitysten välinen raja ei ole yksiselitteinen, ja aineiston voikin luonnehtia koostuvan nimityksen kaltaisista nimistä ja nimen kaltaisista nimityksistä. Kaiken kaikkiaan aineiston nimet ovat hyvin informatiivisia, tarkoitteen fyysisiä tai mentaalisia ominaisuuksia kuvailevia, ja toimivat olennaisena osana tarinankerrontaa. Nimet kielivät kirjailijan kannattamasta ideologiasta, ja kytkeytyvät siten myös reaalimaailmaan. Vaikka kirjailijan nimenanto on osin huolimatonta, on se silti selvästi harkittua. Aili Somersalon luoma nimimaisema on omalakinen ja tunnistettava.

H2O2 has a role in cellular regulation

H2O2, in addition to producing highly reactive molecules through hydroxyl radicals or peroxidase action, can exert a number of direct effects on cells, organelles and enzymes. The stimulations include glucose transport, glucose incorporation into glycogen, HMP shunt pathway, lipid synthesis, release of calcium from mitochondria and of arachidonate from phospholipids, poly ADP ribosylation, and insulin receptor tyrosine kinase and pyruvate dehydrogenase activities. The inactivations include glycolysis, lipolysis, reacylation of lysophospholipids, ATP synthesis, superoxide dismutase and protein kinase C. Damages to DNA and proteoglycan and general cytotoxicity possibly through oxygen radicals were also observed. A whole new range of effects will be opened by the finding that H2O2 can act as a signal transducer in oxidative stress by oxidizing a dithiol protein to disulphide form which then activates transcription of the stress inducible genes. Many of these direct effects seem to be obtained by dithiol-disulphide modification of proteins and their active sites, as part of adaptive responses in oxidative stress.

Euclideanization, topological theories, higher dimensions and all that

It is shown that the euclideanized Yukawa theory, with the Dirac fermion belonging to an irreducible representation of the Lorentz group, is not bounded from below. A one parameter family of supersymmetric actions is presented which continuously interpolates between the N = 2 SSYM and the N = 2 supersymmetric topological theory. In order to obtain a theory which is bounded from below and satisfies Osterwalder-Schrader positivity, the Dirac fermion should belong to a reducible representation of the Lorentz group and the scalar fields have to be reinterpreted as the extra components of a higher dimensional vector field.

Essays on labour demand and wage formation

The first essay in this thesis is on gender wage differentials among manufacturing sector white-collar workers. The wage differential is decomposed into firm, job (within-firm) and individ-ual-level components. Job-level gender segregation explains over half of the gap, while firm-level segregation is not important. After controlling for firm, job and individual characteristics, the remaining unexplained wage cap to the advantage of men is six per cent of men s mean wage. In the second essay, I study how the business cycle and gender affect the distribution of the earnings losses of displaced workers. The negative effect of displacement is large, persistent and strongest in the lowest earnings deciles. The effect is larger in a recession than in a recov-ery period, and in all periods women s earnings drop more than men s earnings. The third essay shows that the transition from steady employment to disability pension de-pends on the stringency of medical screening and the degree of experience-rating of pension costs applied to the employer. The fact that firms have to bear part of the cost of employees disability pension costs lowers both the incidence of long sick leave periods and the probabil-ity that sick leave ends in a disability pension. The fourth and fifth essays are studies on the employment, wage and profit effects of a re-gional payroll tax cut experiment conducted in northern and eastern Finland. The results show no statistically significant effect on any of the response variables.

Irreversible inactivation of 3-hydroxy-3-methylglutaryl-CoA reductase by H2O2

A concentration-dependent inactivation of 3-hydroxy-3-methyl-glutaryl-CoA (HMG-CoA) reductase was found on reincubation of rat liver microsomal preparations with H2O2 and at lower concentrations in the presence of KCN which inhibited the contaminating catalase. The inactivation was not affected in the presence quenchers of hydroxyl radicals and singlet oxygen and was also obtained when H2O2 was added during the reaction. HMG-CoA, but not NADPH, partially protected the enzyme from H2O2-inactivation. Even at high concentration DTT was unable to reverse this inactivation. The soluble 50 kDa-enzyme was similarly inactivated by H2O2, and the tryptic-digest of the inactivated protein indicated the presence of a disulfide-containing peptide. The results support the view that H2O2 by directly acting on the catalytic domain possibly converts an active thiol group to an inaccessible disulfide and irreversibly HMG-CoA reductase.

Partial Discharge Resistant Characteristics of Epoxy Nanocomposites

Epoxy nanocomposite samples with a good dispersion of alumina nanoparticles in epoxy matrix were prepared and experiments were performed to measure their partial discharge resistant characteristics. Epoxy alumina nanocomposites with 0.1, 1, 5, 10 and 15 wt% nanofillers were prepared in the laboratory and partial discharge (PD) experiments were conducted at a voltage of 10 kV for different durations using IEC (b) type electrodes. The degradation of the sample surfaces were analyzed using SEM techniques, surface profile studies, FTIR spectroscopy as well as PD studies. An attempt was made to understand the interaction dynamics between the nanoparticle and the epoxy chain by measuring the glass transition temperature of the nanocomposites. The partial discharge resistance obtained for the nanocomposites are compared with those of unfilled epoxy and epoxy microcomposites. It was observed that even with 0.1 wt% of nanofiller added to the epoxy matrix, the partial discharge resistance to degradation gets improved considerably. It was also observed that the inter particle distance has a significant effect on the discharge resistance to degradation. The improvement in the degradation resistance is attributed to the interactions between the nanoparticle and the epoxy chain. A possible mechanism for the surface degradation of nanocomposites has been proposed.

Exact free-surface flows for shallow-water equations .1. - the incompressible case

A comprehensive exact treatment of free surface flows governed by shallow water equations (in sigma variables) is given. Several new families of exact solutions of the governing PDEs are found and are shown to embed the well-known self-similar or traveling wave solutions which themselves are governed by reduced ODEs. The classes of solutions found here are explicit in contrast to those found earlier in an implicit form. The height of the free surface for each family of solutions is found explicitly. For the traveling or simple wave, the free surface is governed by a nonlinear wave equation, but is arbitrary otherwise. For other types of solutions, the height of the free surface is constant either on lines of constant acceleration or on lines of constant speed; in another case, the free surface is a horizontal plane while the flow underneath is a sine wave. The existence of simple waves on shear flows is analytically proved. The interaction of large amplitude progressive waves with shear flow is also studied.

Acoustic performance of hoses - A parametric study

Modeling of wave propagation in hoses, unlike in rigid pipes or waveguides, introduces a coupling between the inside medium, the hose wall, and the outside medium, This alters the axial wave number and thence the corresponding effective speed of sound inside the hose resulting in sound radiation into the outside medium, also called the breakout or shell noise, The existing literature on the subject is such that a hose cannot be integrated into the,whole piping system made up of sections of hoses, pipes, and mufflers to predict the acoustical performance in terms of transmission loss (TL), The present paper seeks to fill this gap, Three one-dimensional coupled wave equations are written to account for the presence of a yielding wall with a finite lumped transverse impedance of the hose material, The resulting wave equation can readily be reduced to a transfer matrix form using an effective wave number for a moving medium in a hose section, Incorporating the effect of fluid loading due to the outside medium also allows prediction of the transverse TL and the breakout noise, Axial TL and transverse TL have been combined into net TL needed by designers, Predictions of the axial as well as transverse TL are shown to compare well with those of a rigorous 3-D analysis using only one-hundredth of the computation time, Finally, results of some parametric studies are reported for engineers involved in the acoustical design of hoses. (C) 1996 Institute of Noise Control Engineering.

Hormonal modulation of secretion of immunoreactive riboflavin carrier protein by adult rat Leydig cells in vitro

Adult rat Leydig cells in culture synthesize and secrete riboflavin carrier protein (RCP) as demonstrated by [S-35]-methionine incorporation into newly synthesized proteins followed by immunoprecipitation as well as specific radioimmunoassay. LH stimulates the secretion of RCP 4-fold which could be inhibited upto 75% by an aromatase inhibitor. 8-bromo-cyclic AMP and cholera toxin could mimic the LH stimulated secretion of the carrier protein. The extent of stimulation of RCP secretion brought about by exogenous estradiol-17 beta is comparable to that of LH. The antiestrogen tamoxifen, when added along with either LH or estrogen, inhibited the stimulated levels significantly. These results show that the estrogen-inducible riboflavin carrier is secreted by Leydig cells under positive regulation of LH.

Solid-state photobehaviour and crystal packing of o-chlorobenzylidene-DL-piperitone: influence of molecular topology on photobehaviour

C17H19ClO, M(r) = 274.7, triclinic, P1BAR, a = 11.154 (3), b = 12.685 (2), c = 12.713 (2) angstrom, alpha = 100.68 (1), beta = 113.58 (1), gamma = 104.50 (2)-degrees, V = 1511.1 (6) angstrom3, Z = 4, D(m) = 1.22, D(x) = 1.215 Mg m-3, Cu K-alpha, lambda = 1.5418 angstrom, mu = 2.16 mm-1, F(000) = 584, T = 293 K, R = 0.057 for 3481 observed reflections. The title compound is photostable in the crystalline state and lattice-energy calculations have been employed to rationalize the photobehaviour. The well-known beta-steering ability of the chloro group is not operative in this system as there are no Cl...Cl interactions in the crystal lattice. All five benzylidene-DL-piperitone structures so far studied are alpha-packed and the molecular topology appears to be a deciding factor even in the presence of steering groups.

Sliding wear studies in epoxy containing alumina powders

The effect of hard and refractory alumina additions on the mechanical properties of polymer in general and wear behavior in particular is not well studied. In this work, therefore, the changes in wear behavior of epoxy resin due to the additions of alumina powders have been looked into. Using a pin-on-disc set up, dry sliding wear tests were done on both filled (4, 8, & 11 wt. % alumina) and unfilled samples. A sliding velocity of 0.83 m/sec. and a sliding distance of 2 km were employed for the study. Load range used varied from 9.8 N to about 29 N. The experiments point to an increased resistance to wear with an increased presence of filler in the matrix. Further, higher loads result in larger loss of material irrespective of the filler level in the composite.