413 resultados para 1351
Resumo:
Over 14,000 specimens-5,204 brachiopods, 9,137 bivalves, and 178 gastropods-acquired from 30 collecting stations (0 to 45 m depth) in the Ubatuba and Picinguaba bays, southern Brazil, were compared for drilling frequencies. Beveled (countersunk) circular-to-subcircular borings (Oichnus-like drill holes) were found in diverse bivalves but also in the rhynchonelliform brachiopod Bouchardia rosea-a small, semi-infaunal to epifaunal, free-lying species that dominates the brachiopod fauna of the southern Brazilian shelf. Drill holes in bivalve mollusks and brachiopods are comparable in their morphology, average diameter, and diameter range, indicating attacks by a single type of drilling organism. Drill holes in brachiopods were rare (0.4%) and found only at five sampling sites. Drillings in bivalves were over 10 times as frequent as in brachiopods, but the average drilling frequency was still low (5.6%) compared to typical boring frequencies of Cenozoic mollusks. Some common bivalve species, however, were drilled at frequencies up to 50 times higher than those observed for shells of B. rosea from the same samples. Due to scarcity of drilled brachiopods, it is not possible to evaluate if the driller displayed a nonrandom (stereotyped) site, size, or valve preference. Drilled brachiopods may record (1) naticid or muricid predation, (2) predation by other drillers, (3) parasitic drillings, and (4) mistaken or opportunistic attacks. Low drilling frequency in brachiopods is consistent with recent reports on ancient and modern examples. The scarcity of drilling in brachiopods, coupled with much higher drilling frequencies observed in sympatric bivalves, suggests that drilling in brachiopods may have been due to facultative or erroneous attacks. The drilling frequencies observed here for the brachiopod-bivalve assemblages are remarkably similar to those reported for Permian brachiopod-bivalves associations. This report adds to the growing evidence for an intriguing macroecological stasis: multiple meta-analytical surveys of present-day and fossil rhynchonelliform brachiopods conducted in recent years also point to persistent scarcity and low intensity of biotic interactions between brachiopods and drilling organisms throughout their evolutionary history.
Resumo:
Rhynchonelliform brachiopods were diverse and often dominant benthos of tropical seas in the Paleozoic. In contrast, they are believed to be rare in open habitats of modern oceans, especially at low latitudes. This study documents numerous occurrences of rhynchonelliform brachiopods on a modern tropical shelf, particularly in areas influenced by upwelling. Extensive sampling of the outer shelf and coastal bays of the Southeast Brazilian Bight revealed dense populations of terebratulid brachiopods (>10(3) individuals /m(2) of seafloor) between 24 and 26 S. on the outer shelf, brachiopods are more abundant than bivalves and gastropods combined. However, brachiopod diversity is low: only four species belonging to the genera Bouchardia, Terebratulina, Argyrotheca, and Platidia were identified among over 16000 examined specimens. Brachiopods occur preferentially on carbonate bottoms and include two substrate-related associations: Bouchardia (40-70% CaCO3, weight content) and Terebratulina-Argyrotheca (70-95% CaCO3). All four species display a broad bathymetric range that contrasts with a narrow depth tolerance postulated for many Paleozoic rhynchonelliforms. The most abundant populations occur in the depth range between 100 and 200 m, and coincide with zones of shelf-break upwelling, where relatively colder and nutrient-rich water masses of the South Atlantic Central Water are brought upward by cyclonic meanders of the South Brazil Current (a western boundary current that flows poleward along the coast of Brazil). This is consistent with previous biological and paleontological studies that suggest upwelling may play a role in sustaining brachiopod-dominated benthic associations. The presence of abundant brachiopods in the open habitats of the tropical shelf of the western South Atlantic contrasts with current understanding of their latitudinal distribution and points to major gaps in our knowledge of their present-day biogeography. The ecological importance of rhynchonelliform brachiopods in modern oceans and their role as producers of biogenic sedimentary particles may be underestimated.
Resumo:
This study is the first assessment of mollusk fossil assemblages relative to the compositional fidelity of modern mollusk living and death assemblages. It also shows that the sedimentary record can provide information on the original, non-human-impacted, freshwater malacofauna biodiversity, based on Late Pleistocene shells. The fossil mollusk assemblage from the Touro Passo Formation (Pleistocene-Holocene) was compared to living and death assemblages of the Touro Passo River, southern Brazil, revealing little resemblance between fossil and live-dead species composition. Although the living and death assemblages agree closely in richness, species composition, and species relative abundances (both proportional and rank), the fossil assemblage differs significantly from both modern assemblages in most of these measures. The fossil assemblage is dominated by the native endemic corbiculid bivalve Cyanocyclas limosa and the gastropod Heleobia aff. bertoniana. These are absent in the living assemblages, and both living and death assemblages are dominated by the alien Asiatic corbiculid C. fluminea, which is absent in the fossil assemblage. The fossil assemblage also contains, overall, a higher proportional abundance of relatively thick-shelled species, suggesting a genuine bias against the thinner- and smaller-shelled species. Our results suggest that contemporary environmental changes, such as the introduction of some alien freshwater mollusk species, together with post-burial taphonomic processes, are the main factors leading to the poor fidelity of the fossil assemblage studied. Hence, the taxonomic composition of the Late Pleistocene mollusks from the Touro Passo Formation probably would show greater similarity to present-day assemblages wherever the mollusk biodiversity is not disturbed by human activities.
Resumo:
The interaction of polyelectrolytes with oppositely charged ionic surfactants was studied at low surfactant concentrations using photochemical bound and free probes. Free probes migrate to initially formed pre-aggregates in systems with high charge- density polyelectrolytes, giving rise to excimer emission. For these systems the initial aggregation process seems to be due to electrostatic interactions. For larger surfactants or copolymers containing larger proportions of neutral monomer that interactions are of hydrophobic nature.
Resumo:
The eukaryotic translation initiation factor 5A (eIF5A) undergoes a specific post-translational modification called hypusination. This modification is required for the functionality of this protein. The compound N1-guanyl-1,7-diaminoheptane (GC7) is a potent and selective inhibitor of deoxyhypusine synthase, which catalyses the first step of eIF5A hypusination process. In the present study, the effects of GC7 on cell death were investigated using two cell lines: melan-a murine melanocytes and Tm5 marine melanoma. In vitro treatment with GC7 increased by 3-fold the number of cells presenting DNA fragmentation in Tm5 cells. Exposure to GC7 also decreased viability to both cell lines. This study also describes, for the first time, the in vivo antitumour effect of GC7, as indicated by impaired melanoma growth in C57BL/6 mice. Copyright © 2006 John Wiley & Sons, Ltd.
Resumo:
Purpose: The aim of this study was to evaluate the fracture resistance of ceramic plates cemented to dentin as a function of the resin cement film thickness. Materials and Methods: Ceramic plates (1 and 2 mm thicknesses) were cemented to bovine dentin using resin composite cement. The film thicknesses used were approximately 100, 200, and 300 μm. Noncemented ceramic plates were used as control. Fracture loads (N) were obtained by compressing a steel indenter in the center of the ceramic plates. ANOVA and Tukey tests (α = 0.05) were used for each ceramic thickness to compare fracture loads among resin cement films used. Results: Mean fracture load (N) for 1-mm ceramic plates were: control - 26 (7); 100 μm - 743 (150); 200 μm - 865 (105); 300 μm - 982 (226). Test groups were significantly different from the control group; there was a statistical difference in fracture load between groups with 100 and 300 μm film thicknesses (p < 0.01). Mean fracture load for 2-mm ceramic plates were: control - 214 (111); 100 μm - 1096 (341); 200 μm - 1067 (226); 300 μm - 1351 (269). Tested groups were also significantly different from the control group (p < 0.01). No statistical difference was shown among different film thicknesses. Conclusions: Unluted specimens presented significantly lower fracture resistance than luted specimens. Higher cement film thickness resulted in increased fracture resistance for the 1-mm ceramic plates. Film thickness did not influence the fracture resistance of 2-mm porcelain plates. Copyright © 2007 by The American College of Prosthodontists.
Resumo:
Incluye Bibliografía
Resumo:
Glucose-6-phosphate dehydrogenase (G6PD) deficiency is an enzymopathy in which reduced NADPH concentrations are not maintained, resulting in oxidative damage. We evaluated G6PD activity, oxidative stress levels and Trolox equivalent antioxidant capacity in individuals with the A-(202G>A) mutation for G6PD deficiency. Five hundred and forty-four peripheral blood samples were screened for G6PD deficiency; we also analyzed lipid peroxidation products measured as thiobarbituric acid reactive species and Trolox equivalent antioxidant capacity. Men with the A-(202G>A) mutation had lower G6PD activity than women with the same mutation. Individuals with the A-(202G>A) mutation also differed in mean Trolox equivalent antioxidant capacity values but not for thiobarbituric acid reactive species values. We concluded that A-(202G>A) mutation is associated with reduced G6PD activity and increased Trolox equivalent antioxidant capacity. ©FUNPEC-RP.
Resumo:
In this work, is presented an alternative and non conventional technique for evaluate the water amount present in the hydrated ethanol used as automotive fuel. The standard technique used in this kind of measure is the use of densimeter. The proposal of this work is based on the measure of the linear attenuation coefficient of hydrated ethanol, using the gamma-ray attenuation technique. The water amount, in volume, can be determined knowing the linear attenuation coefficient of hydrated ethanol. Samples of hydrated ethanol, collected at fuel stations, located in Sorocaba, SP, Brazil, were analyzed and the results showed the feasibility of the technique. © 2011 American Institute of Physics.
Resumo:
Proton beams in medical applications deal with relatively thick targets like the human head or trunk. Thus, the fidelity of proton computed tomography (pCT) simulations as a tool for proton therapy planning depends in the general case on the accuracy of results obtained for the proton interaction with thick absorbers. GEANT4 simulations of proton energy spectra after passing thick absorbers do not agree well with existing experimental data, as showed previously. Moreover, the spectra simulated for the Bethe-Bloch domain showed an unexpected sensitivity to the choice of low-energy electromagnetic models during the code execution. These observations were done with the GEANT4 version 8.2 during our simulations for pCT. This work describes in more details the simulations of the proton passage through aluminum absorbers with varied thickness. The simulations were done by modifying only the geometry in the Hadrontherapy Example, and for all available choices of the Electromagnetic Physics Models. As the most probable reasons for these effects is some specific feature in the code, or some specific implicit parameters in the GEANT4 manual, we continued our study with version 9.2 of the code. Some improvements in comparison with our previous results were obtained. The simulations were performed considering further applications for pCT development. © 2011 American Institute of Physics.
Resumo:
Includes bibliography
Resumo:
Cimetidine, an H2 receptor antagonist used for treatment of gastric ulcers, exerts antiandrogenic and antiangiogenic effects. In the testes cimetidine impairs spermatogenesis, Sertoli cells and peritubular tissue, inducing apoptosis in the myoid cells. Regarding the importance of histamine and androgens for vascular maintenance, the effect of cimetidine on the structural integrity of the testicular vasculature was evaluated. Adult male rats received cimetidine (CMTG) and saline (CG) for 50 days. The testes were fixed in buffered 4% formaldehyde and embedded in historesin and paraffin. In the PAS-stained sections, the microvascular density (MVD) and the vascular luminal area (VLA) were obtained. TUNEL method was performed for detection of cell death. Testicular fragments embedded in Araldite were analyzed under transmission electron microscopy. A significant decrease in the MVD and VLA and a high number of collapsed blood vessel profiles were observed in CMTG. Endothelial cells and vascular muscle cells were TUNEL-positive and showed ultrastructural features of apoptosis. These results indicate that cimetidine induces apoptosis in vascular cells, leading to testicular vascular atrophy. A possible antagonist effect of cimetidine on the H2 receptors and/or androgen receptors in the vascular cells may be responsible for the impairment of the testicular microvasculature.
Resumo:
This paper describes the main characteristics and advantages of convective heating system for refractory lining, compared with conventional heating systems. In addition the main results obtained are presented with its implementation in CSN Blast Furnace #2 and 3 Runners, in terms of cost and equipment availability, as well as the need for ceramic coating to protect the lining against oxidation, arising from excessive air combustion. © 2012 Elsevier Ltd. All rights reserved.
Resumo:
An investigation on the sinterization of Gd:CeO2 (Ce 0.85Gd0.15O1.9-δ ceramic system) 3-10 nm nanoparticles in pressed bodies was done. The heating rate was taken as a key parameter and two competing sinterization processes were identified, associated with different diffusional mechanisms. Using heating rates of 113 C min -1, a high-final density (98 % of the theoretical) was obtained by superposing the two aforementioned mechanisms, resulting in a homogeneous microstructure at lower temperatures. © 2012 Akadémiai Kiadó, Budapest, Hungary.