Comparing the distribution of the electronic gap of an organic molecule with its photoluminescence spectrum

The electronic gap structure of the organic molecule N,N′-diphenyl-N,N′-bis(3-methylphenyl)-(1,1′-biphenyl)-4,4′-diamine, also known as TPD, has been studied by means of a Scanning Tunneling Microscope (STM) and by Photoluminescence (PL) analysis. Hundreds of current-voltage characteristics measured at different spots of the sample show the typical behavior of a semiconductor. The analysis of the curves allows to construct a gap distribution histogram which reassembles the PL spectrum of this compound. This analysis demonstrates that STM can give relevant information, not only related to the expected value of a semiconductor gap but also on its distribution which affects its physical properties such as its PL.

SOA-Based Model for Value-Added ITS Services Delivery

Integration is currently a key factor in intelligent transportation systems (ITS), especially because of the ever increasing service demands originating from the ITS industry and ITS users. The current ITS landscape is made up of multiple technologies that are tightly coupled, and its interoperability is extremely low, which limits ITS services generation. Given this fact, novel information technologies (IT) based on the service-oriented architecture (SOA) paradigm have begun to introduce new ways to address this problem. The SOA paradigm allows the construction of loosely coupled distributed systems that can help to integrate the heterogeneous systems that are part of ITS. In this paper, we focus on developing an SOA-based model for integrating information technologies (IT) into ITS to achieve ITS service delivery. To develop our model, the ITS technologies and services involved were identified, catalogued, and decoupled. In doing so, we applied our SOA-based model to integrate all of the ITS technologies and services, ranging from the lowest-level technical components, such as roadside unit as a service (RS S), to the most abstract ITS services that will be offered to ITS users (value-added services). To validate our model, a functionality case study that included all of the components of our model was designed.

Amphibian Hotspots and Conservation Priorities in Eastern Cuba Identified by Species Distribution Modeling

The high rate of amphibian endemism and the severe habitat modification in the Caribbean islands make them an ideal place to test if the current protected areas network might protect this group. In this study, we model distribution and map species richness of the 40 amphibian species from eastern Cuba with the objectives of identify hotspots, detect gaps in species representation in protected areas, and select additional areas to fill these gaps. We used two modeling methods, Maxent and Habitat Suitability Models, to reach a consensus distribution map for each species, then calculate species richness by combining specific models and finally performed gap analyses for species and hotspots. Our results showed that the models were robust enough to predict species distributions and that most of the amphibian hotspots were represented in reserves, but 50 percent of the species were incompletely covered and Eleutherodactylus rivularis was totally uncovered by the protected areas. We identified 1441 additional km2 (9.9% of the study area) that could be added to the current protected areas, allowing the representation of every species and all hotspots. Our results are relevant for the conservation planning in other Caribbean islands, since studies like this could contribute to fill the gaps in the existing protected areas and to design a future network. Both cases would benefit from modeling amphibian species distribution using available data, even if they are incomplete, rather than relying only in the protection of known or suspected hotspots.

A Quantile-Based Probabilistic Mean Value Theorem

For non-negative random variables with finite means we introduce an analogous of the equilibrium residual-lifetime distribution based on the quantile function. This allows us to construct new distributions with support (0, 1), and to obtain a new quantile-based version of the probabilistic generalization of Taylor's theorem. Similarly, for pairs of stochastically ordered random variables we come to a new quantile-based form of the probabilistic mean value theorem. The latter involves a distribution that generalizes the Lorenz curve. We investigate the special case of proportional quantile functions and apply the given results to various models based on classes of distributions and measures of risk theory. Motivated by some stochastic comparisons, we also introduce the “expected reversed proportional shortfall order”, and a new characterization of random lifetimes involving the reversed hazard rate function.

New Orleans, Louisiana, Water Distribution System, 1902 (Raster Image)

This layer is a georeferenced raster image of the historic paper map entitled: Map of the city of New Orleans : showing proposed water distribution system, [by] Sewerage and Water Board New Orleans, LA.; Geo. G. Earl, genl. sup't. It was published by the Sewerage and Water Board New Orleans in 1902. Scale [ca. 1:50,900]. The image inside the map neatline is georeferenced to the surface of the earth and fit to the Louisiana State Plane Coordinate System, South NAD83 (in Feet) (Fipszone 1702). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, or other information associated with the principal map. This map shows water distribution features such as existing and proposed water mains (with sizes), suction pipes, and water purification station sites. Also shows other features such as roads, canals, levees, drainage, cemeteries, Parish boundaries, and more. Shaded to show built-up and unbuilt areas for construction. This layer is part of a selection of digitally scanned and georeferenced historic maps from The Harvard Map Collection as part of the Imaging the Urban Environment project. Maps selected for this project represent major urban areas and cities of the world, at various time periods. These maps typically portray both natural and manmade features at a large scale. The selection represents a range of regions, originators, ground condition dates, scales, and purposes.

The distribution of debt across euro area countries : The role of individual characteristics, institutions and credit conditions. National Bank of Belgium Working Paper No. 252, December 2013

The aim of this paper is twofold. First, we present an up-to-date assessment of the differences across euro area countries in the distributions of various measures of debt conditional on household characteristics. We consider three different outcomes: the probability of holding debt, the amount of debt held and, in the case of secured debt, the interest rate paid on the main mortgage. Second, we examine the role of legal and economic institutions in accounting for these differences. We use data from the first wave of a new survey of household finances, the Household Finance and Consumption Survey, to achieve these aims. We find that the patterns of secured and unsecured debt outcomes vary markedly across countries. Among all the institutions considered, the length of asset repossession periods best accounts for the features of the distribution of secured debt. In countries with longer repossession periods, the fraction of people who borrow is smaller, the youngest group of households borrow lower amounts (conditional on borrowing), and the mortgage interest rates paid by low-income households are higher. Regulatory loan-to-value ratios, the taxation of mortgages and the prevalence of interest-only or fixed-rate mortgages deliver less robust results.

Physical Characteristics and Estimated Hydraulic Conductivity from Grain-Size Distribution for Vashon Till, South-Central Puget Lowland, Washington

Population growth, urban development, and increased commercial and industrial activity in the south-central Puget Lowlands of Washington State has led to an increased demand for groundwater. The Vashon till is a glacially consolidated, low-permeability unit comprising unstratified clay, silt, cobbles and boulders with ubiquitous coarse-grained lenses and is an extensive surficial unit throughout the south-central Puget Lowland. Thus, understanding the physical and hydrological characteristics – specifically, the hydraulic conductivity – of this unit is a necessary component of a groundwater model. This study provides (1) a record of the physical characteristics of Vashon till deposits within the study area; and (2) an estimate of the highest, lowest, and average value of saturated hydraulic conductivity based on the grain-size distribution of Vashon till samples collected from six field sites in the Puyallup River Watershed. Analysis shows that the average moisture content ranges between about 1 and 6%, average dry bulk density is about 2.20 g/cm3, and average porosity is about 17%. Grain-size distributions show that half of the samples analyzed are well graded, while the other half is poorly graded. Grain-size distributions also show an average d10 value of about 0.20 mm, and average ff values ≤ 16%, which are key values in estimating the saturated hydraulic conductivity of over-consolidated glacial deposits. Based on these observed values, the estimates of hydraulic conductivity range from a minimum of 0.02 m/d to a maximum of 1.38 m/d in within the general Vashon till.

Mollusca Non-Grata: The influence of top-down control and residence time on the abundance, distribution, and behavior of non-native marine snails in Washington State

Thesis (Ph.D.)--University of Washington, 2016-06

The value of patches of intertidal seagrass to prawns depends on their proximity to mangroves

Penaeid prawns were sampled with a small seine net to test whether catches of postlarvae and juveniles in seagrass were affected by the distance of the seagrass (mainly Zostera capricorni) from mangroves and the density of the seagrass in a subtropical marine embayment. Sampling was replicated on the western and eastern sides of Moreton Bay, Queensland, Australia. Information on catches was combined with broad-scale spatial information on the distribution of habitats to estimate the contribution of four different categories of habitat (proximal dense seagrass, distal dense seagrass, proximal sparse seagrass, distal sparse seagrass) to the overall population of small prawns in these regions of Moreton Bay. The abundance of Penaeus plebejus and Metapenaeus bennettae was significantly and consistently greater in dense seagrass proximal to mangroves than in other types of habitat. Additionally, sparse seagrass close to mangroves supported more of these species than dense seagrass farther away, indicating that the role of spatial arrangement of habitats was more important than the effects of structural complexity alone. In contrast, the abundance of P. esculentus tended to be greatest in sparse seagrass distal from mangroves compared with the other habitats. The scaling up of the results from different seagrass types suggests that proximal seagrass beds on both sides of Moreton Bay provide by far the greatest contribution of juvenile M. bennettae and P. plebejus to the overall populations in the Bay.

Using extreme value theory to measure value-at-risk for daily electricity spot prices

The recent deregulation in electricity markets worldwide has heightened the importance of risk management in energy markets. Assessing Value-at-Risk (VaR) in electricity markets is arguably more difficult than in traditional financial markets because the distinctive features of the former result in a highly unusual distribution of returns-electricity returns are highly volatile, display seasonalities in both their mean and volatility, exhibit leverage effects and clustering in volatility, and feature extreme levels of skewness and kurtosis. With electricity applications in mind, this paper proposes a model that accommodates autoregression and weekly seasonals in both the conditional mean and conditional volatility of returns, as well as leverage effects via an EGARCH specification. In addition, extreme value theory (EVT) is adopted to explicitly model the tails of the return distribution. Compared to a number of other parametric models and simple historical simulation based approaches, the proposed EVT-based model performs well in forecasting out-of-sample VaR. In addition, statistical tests show that the proposed model provides appropriate interval coverage in both unconditional and, more importantly, conditional contexts. Overall, the results are encouraging in suggesting that the proposed EVT-based model is a useful technique in forecasting VaR in electricity markets. (c) 2005 International Institute of Forecasters. Published by Elsevier B.V. All rights reserved.

Creating and managing value in collaborative networks

This is a theoretical paper that examines the interplay between individual and collective capabilities and competencies and value transactions in collaborative environments. The theory behind value creation is examined and two types of value are identified, internal value (Shareholder value) and external value (Value proposition). The literature on collaborative enterprises/network is also examined with particular emphasis on supply chains, extended/virtual enterprises and clusters as representatives of different forms and maturities of collaboration. The interplay of value transactions and competencies and capabilities are examined and discussed in detail. Finally, a model is presented which consists of value transactions and a table which compares the characteristics of different types of collaborative enterprises/networks. It is proposed that this model presents a platform for further research to develop an in-depth understanding into how value may be created and managed in collaborative enterprises/networks.

Gas distribution in shallow large diameter packed beds

It is important to maintain a uniform distribution of gas and liquid in large diameter packed columns to maintain mass transfer efficiency on scaling up. This work presents measurements and methods of evaluating maldistributed gas flow in packed columns. Little or no previous work has been done in this field. A gas maldistribution number, F, was defined, based on point to point velocity variations in the gas emerging from the top of packed beds. f has a minimum value for a uniformly distributed flow and much larger values for maldistributed flows. A method of testing the quality of vapour distributors is proposed, based on "the variation of f with packed height. A good gas distributor requires a short packed depth to give a good gas distribution. Measurements of gas maldistribution have shown that the principle of dynamic similarity is satisfied if two geometrically similar beds are operated at the same Reynold's number. The validity of f as a good measure of gas maldistribution, and the principle of dynamic similarity are tested statistically by Multi-Factor Analysis of the variance, and visually by the response "surfaces technique. Pressure distribution has been measured in a model of a large diameter packed bed, and shown to be associated with the velocity of the gas in a tangential feed pipe. Two simplified theoretical models are proposed to describe the flow of gases through packed beds and to support the principle of dynamic similarity. These models explain why the packed bed itself causes the flow of gas to become more uniformly distributed. A 1.2m. diameter scaled-down model was constructed geometrically similar to a 7.3m. diameter vacuum crude distillation column. The previously known internal cylinder gas distributor was tested. Three new distributors suitable for use in a large diameter column were developed and tested, these are: Internal Cylinder with Slots and Cross Baffles, Internal Cylinder with Guides in the Annulus, Internal Cylinder with Internal Cross Baffles - It has been shown that this is an excellent distributor.

An assessment of the performance of high density polyethylene copolymers for natural gas distribution pipes

The total thermoplastics pipe market in west Europe is estimated at 900,000 metric tonnes for 1977 and is projected to grow to some 1.3 million tonnes of predominantly PVC and polyolefins pipe by 1985. By that time, polyethylene for gas distribution pipe and fittings will represent some 30% of the total polyethylene pipe market. The performance characteristics of a high density polyethylene are significantly influenced by both molecular weight and type of comonomer; the major influences being in the long-term hoop stress resistance and the environmental stress cracking resistance. Minor amounts of hexene-1 are more effective than comonomers lower in the homologous series, although there is some sacrifice of density related properties. A synergistic improvement is obtained by combining molecular weight increase with copolymerisation. The Long-term design strength of polyethylene copolymers can be determined from hoop stress measurement at elevated temperatures and by means of a separation factor of approximate value 22, extrapolation can be made to room temperature performance for a water environment. A polyethylene of black composition has a sufficiently improved performance over yellow pigmented pipe to cast doubts on the validity of internationally specifying yellow coded pipe for gas distribution service. The chemical environment (condensate formation) that can exist in natural gas distribution networks has a deleterious effect on the pipe performance the reduction amounting to at least two decades in log time. Desorption of such condensate is very slow and the influence of the more aggressive aromatic components is to lead to premature stress cracking. For natural gas distribution purposes, the design stress rating should be 39 Kg/cm2 for polyethylenes in the molecular weight range of 150 - 200,000 and 55 Kg/cm2 for higher molecular weight materials.

Factors determining the size frequency distribution of β-amyloid (Aβ) deposits in Alzheimer's disease

The size frequency distributions of discrete β-amyloid (Aβ) deposits were studied in single sections of the temporal lobe from patients with Alzheimer's disease. The size distributions were unimodal and positively skewed. In 18/25 (72%) tissues examined, a log normal distribution was a good fit to the data. This suggests that the abundances of deposit sizes are distributed randomly on a log scale about a mean value. Three hypotheses were proposed to account for the data: (1) sectioning in a single plane, (2) growth and disappearance of Aβ deposits, and (3) the origin of Aβ deposits from clusters of neuronal cell bodies. Size distributions obtained by serial reconstruction through the tissue were similar to those observed in single sections, which would not support the first hypothesis. The log normal distribution of Aβ deposit size suggests a model in which the rate of growth of a deposit is proportional to its volume. However, mean deposit size and the ratio of large to small deposits were not positively correlated with patient age or disease duration. The frequency distribution of Aβ deposits which were closely associated with 0, 1, 2, 3, or more neuronal cell bodies deviated significantly from a log normal distribution, which would not support the neuronal origin hypothesis. On the basis of the present data, growth and resolution of Aβ deposits would appear to be the most likely explanation for the log normal size distributions.