Development and validation of a high-performance liquid chromatography method for quantification of egonol and homoegonol in Styrax species

Styrax camporum Pohl, known in Brazil as estoraque do campo or cuia de brejo, has been used in the treatment of gastrointestinal diseases. The therapeutic action of S. camporum has been attributed to the ethyl acetate fraction, although the chemical composition of this fraction has not yet been analyzed. In this study, a high-performance liquid chromatography photodiode array detection (HPLC-PAD) method for analysis of Brazilian Styrax species has been developed. The compounds egonol (1) and homoegonol (2) were found to be present in all the samples investigated by HPLC. These compounds were isolated by open column chromatography followed by preparative TLC, and were identified by 1H NMR. Compounds 1 and 2 were thus proposed as phytochemical markers for Styrax, owing to their biological properties and presence in other Styrax species. The developed method has been validated and successfully applied for quantification of 1 and 2 in S. camporum dried leaves and crude ethanolic extracts from S. ferrugineus and S. pohlii aerial parts. Copyright (c) 2011 John Wiley & Sons, Ltd.

Biotransformation of 4-nerolidylcatechol by Heraclides brasiliensis (Lepidoptera: Papilionidae) reduces the toxicity of Piper umbellata (Piperaceae)

Heraclides brasiliensis (Lepidoptera: Papilionidae) larvae feed preferably on Piperaceae, foraging successfully on leaf tissues even though species of this contain high levels of secondary metabolites such as amides and lignans, associated with diverse biological activities including insecticidal properties. Studies examining the metabolism of chemical constituents in Piperaceae by insects are rare. In this study, we characterized the metabolites of 4-nerolidylcatechol (4-NC), the major constituent of Piper umbellata (Piperaceae), and E-2,3-dihydro-3-(3,4-dihydroxyphenyl)farnesoic acid, compounds from fecal material of H. brasiliensis larvae fed a diet containing only P. umbellata leaves. The biotransformed product was also detected in larval and pupal tissues. Moreover, we observed deactivation of the toxicity of P. umbellata leaves against brine shrimp after their metabolism in H. brasiliensis larvae from a LC50 of 523.3 to 3,460.7 mu g/mL. This deactivation is closely associated with the biotransformation of 4-NC to E-2,3-dihydro-3-(3,4-dihydroxyphenyl)farnesoic acid, which showed LC50 of 8.0 and >1,000 mu g/mL, respectively.

Cyclooxygenase inhibitory properties of nor-neolignans from Styrax pohlii

Chemical investigation of the n-hexane and EtOAc fractions of the ethanolic extract from Styrax pohlii (Styracaceae) aerial parts resulted in the isolation of the benzofuran nor-neolignan derivatives egonol (1), homoegonol (2), homoegonol gentiobioside (3), homoegonol glucoside (4) and egonol gentiobioside (5). This is the first report of compounds 1-5 in S. pohlii. Compounds 1-5, the acetyl derivatives 1a and 2a, the ethanolic extract (EE), the n-hexane fraction (HF) and EtOAc fraction (EF) were tested for their inhibitory activities against COX-1 and COX-2. The results showed that EE, HF, EF and compounds 1-5 and 1 a-2 a shown weak to moderate inhibition of COX-1 and COX-2. Among the assayed nor-neolignans, 4 gave a COX-1 inhibition of 35.7% at 30 mu M. Compound 5 displayed a COX-2 inhibition of 19.7% at 30 mu M.

ASPECTOS ESTRUTURAIS DE ALGUMAS NEOLIGNANAS HIDROBENZOFURÂNICAS

STRUCTURAL ASPECTS OF SOME HYDROBENZOFURAN NEOLIGNANS. The neolignans are defined as dimers of allylphenol and propenylphenol between itself or crossed, whose bond does not occur by the 8-8' carbons like lignans. This review centered on stereochemical aspects of the hydrobenzofuran type, a widespread skeleton among neolignans. The chemical structures established based on spectrometric data are registered in the literature. The absolute configurations reported previously were determined by chiroptical techniques. Some chemical transformations with neolignans, performed in previous studies, afforded products which are accumulated in other vegetal species and contributed to assign the unknown stereochemistry of these natural compounds. Possible biosynthetic pathways are also proposed.

Development of corn and flaxseed snacks with high-fibre content using response surface methodology (RSM)

With the increasing emphasis on health and well-being, nutrition aspects need to be incorporated as a dimension of product development. Thus, the production of a high-fibre content snack food from a mixture of corn and flaxseed flours was optimized by response surface methodology. The independent variables considered in this study were: feed moisture, process temperature and flaxseed flour addition, as they were found to significantly impact the resultant product. These variables were studied according to a rotatable composite design matrix (-1.68, -1, 0, 1, 1.68). Response variable was the expansion ratio since it has been highly correlated with acceptability. The optimum corn-flaxseed snack obtained presented a sevenfold increase in dietary fibre, almost 100% increase in protein content compared to the pure corn snack, and yielded an acceptability score of 6.93. This acceptability score was similar to those observed for corn snack brands in the market, indicating the potential commercial use of this new product, which can help to increase the daily consumption of dietary fibre.

Optical chemical sensors using polythiophene derivatives as active layer for detection of volatile organic compounds

Several studies on polythiophene gas sensors, based mainly on electrochemical and gravimetric principles can be found in the literature. However, other principles of gas detection, such as optical and thermal, are still little studied. Optical sensing is suitable for remote detection and offers great versatility at low cost. Here,we report on the use of thin films of seven polythiophene derivatives as active layer in optical sensors for the detection of six volatile organic compounds (n-hexane, toluene, tetrahydrofuran, chloroform, dichloromethane and methanol) and water vapor, in concentration range of 500-30,000 ppm. The results showed that it is possible to use different polythiophene derivatives to differentiate VOCs by optical sensing. Differentiation can be performed based on the presence or not of response to an analyte and the sensitivity value of the sensors for the analytes. Another important feature is the lack of the effect of humidity on the response of most films, which could be a major drawback in the application of these sensors. (C) 2011 Elsevier B.V. All rights reserved.

Aspectos estruturais de algumas neolignanas hidrobenzofurânicas

The neolignans are defined as dimers of allylphenol and propenylphenol between itself or crossed, whose bond does not occur by the 8-8' carbons like lignans. This review centered on stereochemical aspects of the hydrobenzofuran type, a widespread skeleton among neolignans. The chemical structures established based on spectrometric data are registered in the literature. The absolute configurations reported previously were determined by chiroptical techniques. Some chemical transformations with neolignans, performed in previous studies, afforded products which are accumulated in other vegetal species and contributed to assign the unknown stereochemistry of these natural compounds. Possible biosynthetic pathways are also proposed.

Processi di biorefining per l'estrazione di secondary chemical building blocks da sottoprotti dell'agro-industria

Phenol and cresols represent a good example of primary chemical building blocks of which 2.8 million tons are currently produced in Europe each year. Currently, these primary phenolic building blocks are produced by refining processes from fossil hydrocarbons: 5% of the world-wide production comes from coal (which contains 0.2% of phenols) through the distillation of the tar residue after the production of coke, while 95% of current world production of phenol is produced by the distillation and cracking of crude oil. In nature phenolic compounds are present in terrestrial higher plants and ferns in several different chemical structures while they are essentially absent in lower organisms and in animals. Biomass (which contain 3-8% of phenols) represents a substantial source of secondary chemical building blocks presently underexploited. These phenolic derivatives are currently used in tens thousand of tons to produce high cost products such as food additives and flavours (i.e. vanillin), fine chemicals (i.e. non-steroidal anti-inflammatory drugs such as ibuprofen or flurbiprofen) and polymers (i.e. poly p-vinylphenol, a photosensitive polymer for electronic and optoelectronic applications). European agrifood waste represents a low cost abundant raw material (250 millions tons per year) which does not subtract land use and processing resources from necessary sustainable food production. The class of phenolic compounds is essentially constituted by simple phenols, phenolic acids, hydroxycinnamic acid derivatives, flavonoids and lignans. As in the case of coke production, the removal of the phenolic contents from biomass upgrades also the residual biomass. Focusing on the phenolic component of agrifood wastes, huge processing and marketing opportunities open since phenols are used as chemical intermediates for a large number of applications, ranging from pharmaceuticals, agricultural chemicals, food ingredients etc. Following this approach we developed a biorefining process to recover the phenolic fraction of wheat bran based on enzymatic commercial biocatalysts in completely water based process, and polymeric resins with the aim of substituting secondary chemical building blocks with the same compounds naturally present in biomass. We characterized several industrial enzymatic product for their ability to hydrolize the different molecular features that are present in wheat bran cell walls structures, focusing on the hydrolysis of polysaccharidic chains and phenolics cross links. This industrial biocatalysts were tested on wheat bran and the optimized process allowed to liquefy up to the 60 % of the treated matter. The enzymatic treatment was also able to solubilise up to the 30 % of the alkali extractable ferulic acid. An extraction process of the phenolic fraction of the hydrolyzed wheat bran based on an adsorbtion/desorption process on styrene-polyvinyl benzene weak cation-exchange resin Amberlite IRA 95 was developed. The efficiency of the resin was tested on different model system containing ferulic acid and the adsorption and desorption working parameters optimized for the crude enzymatic hydrolyzed wheat bran. The extraction process developed had an overall yield of the 82% and allowed to obtain concentrated extracts containing up to 3000 ppm of ferulic acid. The crude enzymatic hydrolyzed wheat bran and the concentrated extract were finally used as substrate in a bioconversion process of ferulic acid into vanillin through resting cells fermentation. The bioconversion process had a yields in vanillin of 60-70% within 5-6 hours of fermentation. Our findings are the first step on the way to demonstrating the economical feasibility for the recovery of biophenols from agrifood wastes through a whole crop approach in a sustainable biorefining process.

Nanopartikel durch Strukturfixierung mizellarer Assoziate aus amphiphilen, endgruppenfunktionalisierten Diblockcopolymeren

Nanopartikel durch Strukturfixierung mizellarer Assoziate aus amphiphilen, endgruppenfunktionalisierten Diblockcopolymeren Zwei unterschiedliche Diblockcopolymersysteme mit Molmassen unterhalb von Mw = 10 000 g/mol wurden über anionische Polymerisation synthetisiert. Ein hetero-telecheles a,w-Poly(dimethylsiloxan)-b-Poly(ethylenoxid) (PDMS-PEO) Diblockcopolymer wurde mit einer Methacrylatendgruppe am PDMS und entweder einer Benzyl-, Hydroxy- oder Carboxylatendgruppe am PEO funktionalisiert. Ein Poly(butadien)-b-Poly(ethylenoxid) (PB-PEO) Diblockcopolymer wurde am PEO ebenfalls entweder mit einer Benzyl-, Hydroxy- oder Carboxylatendgruppe funktionalisiert. In selektiven Lösungsmitteln wie Wasser oder Methanol bilden beide Diblockcopolymersysteme supramolekulare Strukturen mit sphärischer, zylindrischer oder toroider Geometrie aus, die mit statischer und dynamischer Lichtstreuung in Lösung und mit Rasterkraftmikroskopie (AFM) und Transmissionselektronenmikroskopie (TEM) auf der Oberfläche untersucht wurden. Durch Zusatz eines Vernetzers und Initiators wurden die selbstassoziierenden Mizellen des PDMS-PEO Diblockcopolymers permanent durch radikalische Polymerisation mit UV-Licht fixiert. Mizellen des PB-PEO Diblockcopolymers wurden über Bestrahlung mit gamma-Strahlen permanent fixiert. Die Untersuchung der resultierenden Nanopartikel beider Diblockcopolymersysteme mit AFM und TEM zeigte, daß diese sogar in nicht selektiven Lösungsmitteln wie Tetrahydrofuran formstabil bleiben.

Organocatalytic tandem reactions of polyfunctional compounds for the synthesis of enantioenriched heterocycles. Reazioni tandem organocatalitiche di composti polifunzionali per la sintesi di eterocicli enantioarricchiti.

In questo lavoro di tesi sono state sviluppate reazioni domino, tandem e procedure one-pot per ottenere eterocicli enatioarricchiti. Lo sviluppo di queste metodologie sintetiche è molto importante perché permettono di ottenere molecole complesse partendo da prodotti semplici, senza effettuare ripetuti passaggi di purificazione (stop-and-go or step-by-step synthesis). Lo scopo di questo lavoro è di ottenere derivati tetraidrofuranici modificati e derivati ossoazzolinici enantioarrichiti tramite reazioni SN2-Michael o tramite reazioni aldolica-ciclizzazione-Michael usando la catalisi asimmetrica a trasferimento di fase (PTC). Come catalizzatori PTC per imprimere enantioselezione sono stati utilizzati sali di ammonio quaternario derivati dagli alcaloidi della Cinchona. Sono state ottimizzate le condizioni di reazione (base inorganica, temperatura, solvente, tempo di reazione) per i diversi substrati presi in considerazione. I prodotti target sono stati ottenuti con buone rese, ottime diastereoselezioni ma con bassa enantioselezione. I risultati ottenuti richiedono un’ulteriore ottimizzazione e dovranno essere valutate variazioni strutturali dei nucleofili utilizzati. In this thesis were developed domino, tandem reactions and one-pot procedures to obtained enantioenriched heterocycles. The development of these methodologies is very fundamental because they allow to obtain complex molecules starting from raw materials, without carrying out repeated purification steps (stop-and-go or step-by-step synthesis). The purpose of this work is to obtain enantioenriched tetrahydrofuran and oxazoline derivatives through a SN2-Michael reaction or a aldol- cyclization-Michael reaction using the phase-transfer asymmetric catalysis (PTC). For imprint enantioselection we used Cinchona alkaloids quaternary ammonium salts derivatives. The reaction conditions (inorganic base, temperature, solvent, reaction time) were optimised for the different substrates taken into account. The target products were obtained with good yields, excellent diastereoselections but with low enantioselections. The obtained results require further optimization and structural changes in the nucleophiles used must be evaluated.

Core-shell particles and their application for superhydrophobic surfaces

During the last years great effort has been devoted to the fabrication of superhydrophobic surfaces because of their self-cleaning properties. A water drop on a superhydrophobic surface rolls off even at inclinations of only a few degrees while taking up contaminants encountered on its way. rnSuperhydrophobic, self-cleaning coatings are desirable for convenient and cost-effective maintenance of a variety of surfaces. Ideally, such coatings should be easy to make and apply, mechanically resistant, and long-term stable. None of the existing methods have yet mastered the challenge of meeting all of these criteria.rnSuperhydrophobicity is associated with surface roughness. The lotus leave, with its dual scale roughness, is one of the most efficient examples of superhydrophobic surface. This thesis work proposes a novel technique to prepare superhydrophobic surfaces that introduces the two length scale roughness by growing silica particles (~100 nm in diameter) onto micrometer-sized polystyrene particles using the well-established Stöber synthesis. Mechanical resistance is conferred to the resulting “raspberries” by the synthesis of a thin silica shell on their surface. Besides of being easy to make and handle, these particles offer the possibility for improving suitability or technical applications: since they disperse in water, multi-layers can be prepared on substrates by simple drop casting even on surfaces with grooves and slots. The solution of the main problem – stabilizing the multilayer – also lies in the design of the particles: the shells – although mechanically stable – are porous enough to allow for leakage of polystyrene from the core. Under tetrahydrofuran vapor polystyrene bridges form between the particles that render the multilayer-film stable. rnMulti-layers are good candidate to design surfaces whose roughness is preserved after scratch. If the top-most layer is removed, the roughness can still be ensured by the underlying layer.rnAfter hydrophobization by chemical vapor deposition (CVD) of a semi-fluorinated silane, the surfaces are superhydrophobic with a tilting angle of a few degrees. rnrnrn

Non-Covalent Interaction: Revealed by Rotational Spectroscopy

The pulsed jet Fourier transform microwave spectroscopy have been applied to several molecular complexes involving H2O, freons, methane, carboxylic acids, and rare gas. The obtained results showcase the suitability of this technique for studying the intermolecular interactions. The rotational spectra of three water adducts of halogenated organic molecules, i.e. chlorotrifluoroethylene, isoflurane and alfa,alfa,alfa,-trifluoroanisole, have been investigated. It has been found that, the halogenation of the partner molecules definitely changes the way in which water will link to the partner molecule. Quadrupole hyperfine structures and/or the tunneling splittings have been observed in the rotational spectra of difluoromethane-dichloromethane, chlorotrifluorometane-fluoromethane, difluoromethane-formaldehyde and trifluoromethane-benzene. These features have been useful to describe their intermolecular interactions (weak hydrogen bonds or halogen bonds), and to size the potential energy surfaces of their internal motions. The rotational spectrum of pyridine-methane pointed out that methane prefers to locate above the ring and link to pyridine through a C-H•••π weak hydrogen bond, rather than the C-H•••n interaction. This behavior, typical of complexes of pyridine with rare gases, suggests classifying CH4, in relation to its ability to form molecular complexes with aromatic molecules, as a pseudo rare gas. The conformational equilibria of three bi-molecules of carboxylic acids, acrylic acid-trifluoroacetic acid, difluoroacetic acid-formic acid and acrylic acid-fluoroacetic acid have been studied. The increase of the hydrogen bond length upon H→D isotopic substitution (Ubbelohde effect) has been deduced from the elongation of the carboxylic carbons C•••C distance. The van der Waals complex tetrahydrofuran-krypton shows that the systematic doubling of the rotational lines has been attributed to the residual pseudo-rotation of tetrahydrofuran in the complex, based on the values of the Coriolis coupling constants, and on the type (mu_b) of the interstate transitions.

Optimizing Performance of Conductive Nanoparticle-filled Membranes

Conductive membranes were prepared by magnetic alignment of graphite-coated iron nanoparticles (GCINs) in a polyisobutylene (PIB) matrix, which was cast onto an interdigitated surface electrode. Toluene and tetrahydrofuran (THF) were used as solvents for the casting solution. Different molecular weights of PIB and solutions with concentrations ranging from 0.05- to 50-wt% were explored to optimize the mechanical and physical properties of the membrane. The amount of GCINs used in the membranes ranged from 0.1- to 2.5-wt%, and a sonicator was used to disperse the particles in the membrane. Sedimentation and surfactant studies were conducted to investigate the dispersion of GCINs in solutions. Progresses were made to find an optimal combination of various parameters in order to attain thin homogenous membranes for fast response.

Metabolismo secundário e ligninas de espécies de Piper

O estudo químico das folhas e dos frutos de P. richardiaefolium resultou no isolamento de oito lignanas, sendo duas lignanas furofurânicas (sesamina e kobusina), quatro lignanas dibenzilbutirolactônicas (hinokinina, kusunokinina, arctigenina e haplomirfolina), duas lignanas dibenzilbutirolactólicas (cubebina e 3,4- dimetoxi-3,4-desmetilenodioxicubebina), dois cinamatos de bornila (ferulato de bornila e cumarato de bornila) e na identificação de duas amidas (piplartina e diidropiplartina). Das folhas de P. richardiaefolium foi extraído e analisado o óleo volátil. As estruturas das substâncias isoladas foram identificadas através de métodos espectroscópicos (RMN de 1H e de 13C e espectrometria de massas). O estudo de análise de componentes principais (PCA) das espécies Piper (P. truncatum - k 616, P. richardiaefolium - k 290, P. richardiaefolium - k 350, P. richardiaefolium - k 593, P. truncatum - k 597, P. pseudopotifolium - k 598, P. richardiaefolium - k 854, P. richardiaefolium - k 610, P. truncatum - k 112, P. pseudopotifolium - k 211 e P. cernuum - k 137) permitiu agrupar as espécies em dois grandes grupos e quatro subgrupos em relação à similaridade entre elas. Ligninas do caule de seis espécies de Piper foram extraídas utilizando o método de degradação de Klason e método de Bjorkman, e analisadas por métodos espectroscópicos (IV, RMN de 1H e de 13C). O método de degradação por oxidação por nitrobenzeno foi o escolhido para determinar a relação entre os monolignóis siringila e guaiacila. Os principais metabólitos das espécies estudadas foram comparados com os tipos de ligninas das mesmas espécies e os resultados sugeriram uma independência entre as vias biossintéticas de ligninas e lignanas.

Análise de flavanóides por cromatografia líquida de alta eficiência e eletroforese capilar - otimização de separação e aplicações tecnológicas

No presente trabalho foram estudadas as separações de 18 flavonóides (9 agliconas e 9 glicosídeos) pelas técnicas de Cromatografia Líquida de Alta Eficiência em fase reversa (RP-HPLC) e Cromatografia Micelar Eletrocinética em fluxo reverso (RF-Meck). Em ambas as técnicas foram avaliados solventes puros (metanol, acetonitrila e tetrahidrofurano) e suas misturas como formas de promover a variação de seletividade, através da modificação da fase móvel em HPLC, e da natureza do aditivo orgânico em RF-Meck. Nos estudos efetuados em HPLC utilizando-se gradiente, pode-se comprovar a possibilidade da modelagem do fator de retenção em funçã da proporção de solvente utilizados (MeOH, ACN, THF e suas misturas). Pode-se ainda, com base nos dados de retenção e na análise hierárquica de c1usters, diferenciar quatro diferentes grupos de sistemas cromatográficos com diferentes seletividades para flavonóides agliconas, e outros quatro com diferentes seletividades para glicosídeos. Os sistemas cromatográficos mais ortogonais (cada um pertencente a um grupo de seletividade) foram aplicados na separação de uma planta modelo (Azadirachta indica), de onde pode-se escolher a fase móvel mais seletiva para se otimizar a separação dos flavonóides glicosilados presentes nas folhas desta planta. No método final otimizado pode-se identificar e quantificar cinco dos flavonóides majoritários presentes, sendo três glicosídeos de quercetina (rutina, isoquercitrina e quercitrina) e dois glicosídeos de kaempferol (astragalin e nicotiflorin), em amostras de duas diferentes procedências (Piracicaba-SP e Silvânia-GO). Nos estudos envolvendo a separação dos dezoito flavonóides por RFMEKC pode-se comprovar diferenças significativas de seletividade quando se varia a natureza do solvente orgânico utilizado como aditivo, além de se observar tendências na migração em função das propriedades do solvente adicionado e da estrutura molecular do flavonóide. O solvente de menor eficiência para separação dos flavonóides foi o MeOH. Através da análise dos eletroferogramas obtidos através de um planejamento experimental de misturas, e das trocas de pares críticos observadas nos vários eletrólitos utilizados, obteve-se um método de separação com apenas um par crítico em menos de 12 minutos de corrida. O coeficiente de variação obtido para o fator de retenção foi de 1,5% e para área de 3%, considerando-se cinco injeções. O método desenvolvido foi aplicado com sucesso na identificação dos flavonóides majoritários presentes na planta modelo (Neem), obtendo-se o mesmo resultado do estudo anterior. Como forma de avaliar a concentração de flavonóides totais presentes em espécies vegetais é comum a análise de extratos após hidrólise ácida (conversão de todos glicosídeos em agliconas). Desta forma otimizou-se uma metodologia de separação em RP-HPLC de 8 flavonóides agliconas comumente presentes em alimentos e extratos vegetais de uso cosmético. A otimização foi efetuada mediante um planejamento experimental de misturas, para escolha da fase móvel mais seletiva, e de um planejamento fatorial composto central, para otimização das condições de gradiente. O método obtido foi o mais rápido já visto dentro da literatura consultada. A separação em linha de base foi efetuada em menos de 15 minutos, com coeficientes de variação de área entre 0,1 e 1,8%, coeficiente de correlação de 0,9993 a 0,9994 na faixa de 5 a 100 µg/mL, e limites de quantificação estimados na faixa de 0,1 a 0,21µg/mL. O método desenvolvido foi aplicado na otimização das condições de hidrólise de um extrato de Neem. A otimização foi efetuada através de metodologia de superfície de resposta, levando-se em consideração a concentração de ácido adicionada, o tempo de reação, a temperatura, e a concentração de um antioxidante (ácido ascórbico) adicionado. O resultado da otimização foi uma metodologia de hidrólise com tempo de reação igual a 5 minutos, utilizando-se 1,4 mol/L de HCI, 119°C e 500 µg/mL de ácido ascórbico. Através das metodologias de análise e de hidrólise desenvolvidas pode-se constatar a presença e quantificar no extrato de Neem os flavonóides agliconas quercetina, kaempferol e miricetina. Com o objetivo de se avaliar quais os componentes presentes em extratos vegetais são os responsáveis pelo poder antioxidante atribuído a determinadas plantas, foi montado um sistema de avaliação de poder antioxidante \"on-line\" com reação pós-coluna em HPLC (baseado na literatura) utilizando-se como \"radical livre modelo\" o ABTS. A análise da planta modelo (Neem) neste sistema mostrou que os flavonóides glicosilados identificados nas partes anteriores deste trabalho são os responsáveis pelo poder antioxidante atribuído a esta planta. De posse desta informação, e visando a obtenção de extratos para aplicações cosméticas com poder antioxidante, modelou-se a extração dos flavonóide do Neem em função da composição do solvente extrator (água, etanol , propilenoglicol e suas misturas), de acordo com um planejamento simplex centróide ampliado. Além da previsão da concentração dos princípios ativos pode-se ainda prever outras propriedades dos extratos obtidos, tais como, índice de refração e densidade, muitas vezes constituintes de especificações técnicas de acordo com as aplicações a que se destinam (cremes, xampús, etc).