Undulation instability in block-copolymer lamellae subjected to a perpendicular electric field

We examine the stability of lamellar stacks in the presence of an electric field, E-0, applied normal to the lamellae. Calculations are performed with self-consistent field theory (SCFT) supplemented by an exact treatment of the electrostatic energy for linear dielectric materials. The calculations identify a critical electric field, E-0*, beyond which the lamellar stack becomes unstable with respect to undulations. This E-0* rapidly decreases towards zero as the number of lamellae in the stack diverges. Our quantitative predictions for E-0* are consistent with previous experimental measurements by Xu and co-workers.

Comparison of heat stability of goat milk subjected to ultra-high temperature and in-container sterilisation

Goatmilk with and without stabilizing salt was subjected to in-container and UHTsterilization. Heatstability was assessed by measuring the amount of sediment in the milk. Without stabilizing salts, goatmilk usually produced less sediment when subjected to in-containersterilization compared with UHT processing. Addition of stabilizing salts up to 12.8 mM resulted in a progressive increase in sediment for in-containersterilization. In contrast, adding stabilizing salts at 6.4 mM initially reduced sediment formation in UHT-treated milk but addition of stabilizing salts at 12.8 mM increased sediment formation. Adding stabilizing salts to goatmilk increased pH, decreased ionic calcium, and increased ethanol stability. Adding up to 2 mM calcium chloride increased sediment formation more after UHT treatment than after in-containersterilization. These results suggest that no single mechanism or set of reactions causes milk to produce sediment during heating and that the favored pathway is different for UHT and in-containersterilization processes. Poor heatstability could be induced both by increasing ionic calcium and by decreasing it. Ethanol stability is not a good indicator of heatstability for in-containersterilization, but it may be for UHTsterilization, if milk does not enter the region of poor heatstability found at low concentrations of ionic calcium.

A two-dimensional X-ray scattering system for in-situ time-resolving studies of polymer structures subjected to controlled deformations

A two-dimensional X-ray scattering system developed around a CCD-based area detector is presented, both in terms of hardware employed and software designed and developed. An essential feature is the integration of hardware and software, detection and sample environment control which enables time-resolving in-situ wide-angle X-ray scattering measurements of global structural and orientational parameters of polymeric systems subjected to a variety of controlled external fields. The development and operation of a number of rheometers purpose-built for the application of such fields are described. Examples of the use of this system in monitoring degrees of shear-induced orientation in liquid-crystalline systems and crystallization of linear polymers subsequent to shear flow are presented.

Effect of seasonal variation on some physical properties and heat stability of milk subjected to ultra-high temperature and in-container sterilisation

Heat stability was evaluated in bulk raw milk, collected throughout the year and subjected to ultra-high temperature (UHT) or in-container sterilisation, with and without added calcium chloride (2 mM), disodium hydrogen phosphate (DSHP, 10 mM) and trisodium citrate (TSC, 10 mM). More sediment was observed following in-container sterilisation (0.24%) compared with UHT (0.19%). Adding CaCl2 made the milk more unstable to UHT than to in-container sterilisation, while adding DSHP and TSC made the milk more unstable during in-container sterilisation than to UHT processing, although TSC addition increased the sediment formed by UHT processing. Better heat stability was observed in autumn and winter than in spring and summer following UHT. However, following in-container sterilisation, samples with added stabilising salts showed significantly improved heat stability in autumn, whereas with added CaCl2, the best heat stability was observed in spring. No correlation was found between urea and heat stability. DSHP and TSC made the milk more unstable during in-container sterilisation than to UHT processing, although TSC addition increased the sediment formed by UHT processing. Better heat stability was observed in autumn and winter than in spring and summer following UHT. However, following in-container sterilisation, samples with added stabilising salts showed significantly improved heat stability in autumn, whereas with added CaCl2, the best heat stability was observed in spring. No correlation was found between urea and heat stability.

Low level laser therapy (LLLT) decreases pulmonary microvascular leakage, neutrophil influx and IL-1 beta levels in airway and lung from rat subjected to LPS-induced inflammation

Background and Objective. Low level laser therapy (LLLT) is a known anti-inflammatory therapy. Herein we studied the effect of LLLT on lung permeability and the IL-1 beta level in LPS-induced pulmonary inflammation. Study Design/Methodology. Rats were divided into 12 groups (n = 7 for each group). Lung permeability was measured by quantifying extravasated albumin concentration in lung homogenate, inflammatory cells influx was determined by myeloperoxidase activity, IL-1P in BAL was determined by ELISA and IL-1P mRNA expression in trachea was evaluated by RT-PCR. The rats were irradiated on the skin over the upper bronchus at the site of tracheotomy after LPS. Results. LLLT attenuated lung permeability. In addition, there was reduced neutrophil influx, myeloperoxidase activity and both IL-1 beta in BAL and IL-1 beta mRNA expression in trachea obtained from animals subjected to LPS-induced inflammation. Conclusion. LLLT reduced the lung permeability by a mechanism in which the IL-1 beta seems to have an important role.

Increased Viability of Odontoblast-Like Cells Subjected to Low-Level Laser Irradiation

Studies have shown that the increase of cell metabolism depends on the low level laser therapy (LLLT) parameters used to irradiate the cells. However, the optimal laser dose to up-regulate pulp cell activity remains unknown. Consequently, the aim of this study was to evaluate the metabolic response of odontoblast-like cells (MDPC-23) exposed to different LLLT doses. Cells at 20000 cells/cm(2) were seeded in 24-well plates using plain culture medium (DMEM) and were incubated in a humidified incubator with 5% CO(2) at 37 degrees C. After 24 h, the culture medium was replaced by fresh DMEM supplemented with 5% (stress by nutritional deficit) or 10% fetal bovine serum (FBS). The cells were exposed to different laser doses from a near infrared diode laser prototype designed to provide a uniform irradiation of the wells. The experimental groups were: G1: 1.5 J/cm(2) + 5% FBS; G2: 1.5 J/cm(2) + 10% FBS; G3: 5 J/cm(2) + 5% FBS; G4: 5 J/cm(2) + 10% FBS; G5: 19 J/cm(2) + 5% FBS; G6: 19 J/cm(2) + 10% FBS. LLLT was performed in 3 consecutive irradiation cycles with a 24-hour interval. Non-irradiated cells cultured in DMEM supplemented with either 5 or 10% FBS served as control groups. The analysis of the metabolic response was performed by the MTT assay 3 h after the last irradiation. G1 presented an increase in SDH enzyme activity and differed significantly (Mann-Whitney test, p < 0.05) from the other groups. Analysis by scanning electron microscopy showed normal cell morphology in all groups. Under the tested conditions, LLLT stimulated the metabolic activity of MDPC-23 cultured in DMEM supplemented with 5% FBS and exposed to a laser dose of 1.5 J/cm(2). These findings are relevant for further studies on the action of near infrared lasers on cells with odontoblast phenotype.

'Moving On' and Transitional Bridges : Studies on migration, violence and wellbeing in encounters with Somali-born women and the maternity health care in Sweden

During the latest decade Somali-born women with experiences of long-lasting war followed by migration have increasingly encountered Swedish maternity care, where antenatal care midwives are assigned to ask questions about exposure to violence. The overall aim in this thesis was to gain deeper understanding of Somali-born women’s wellbeing and needs during the parallel transitions of migration to Sweden and childbearing, focusing on maternity healthcare encounters and violence. Data were obtained from medical records (paper I), qualitative interviews with Somali-born women (II, III) and Swedish antenatal care midwives (IV). Descriptive statistics and thematic analysis were used. Compared to pregnancies of Swedish-born women, Somali-born women’s pregnancies demonstrated later booking and less visits to antenatal care, more maternal morbidity but less psychiatric treatment, less medical pain relief during delivery and more emergency caesarean sections and small-for-gestational-age infants (I). Political violence with broken societal structures before migration contributed to up-rootedness, limited healthcare and absent state-based support to women subjected to violence, which reinforced reliance on social networks, own endurance and faith in Somalia (II). After migration, sources of wellbeing were a pragmatic “moving-on” approach including faith and motherhood, combined with social coherence. Lawful rights for women were appreciated but could concurrently risk creating power tensions in partner relationships. Generally, the Somali-born women associated the midwife more with providing medical care than with overall wellbeing or concerns about violence, but new societal resources were parallel incorporated with known resources (III). Midwives strived for woman-centered approaches beyond ethnicity and culture in care encounters, with language, social gaps and divergent views on violence as potential barriers in violence inquiry. Somali-born women’s strength and contentment were highlighted, and ongoing violence seldom encountered according to the midwives experiences (IV). Pragmatism including “moving on” combined with support from family and social networks, indicate capability to cope with violence and migration-related stress. However, this must be balanced against potential unspoken needs at individual level in care encounters.With trustful relationships, optimized interaction and networking with local Somali communities and across professions, the antenatal midwife can have a “bridging-function” in balancing between dual societies and contribute to healthy transitions in the new society.

2D and 3D modelling of building form subjected to ember attack

This paper furthers the research of Rollo, Luther and Atkinson 1999, and Rollo, Honey, Atkinson and Luther 2003, regarding the way in which building shape appears to contribute to the collection of fire-brand debris subject to ember attack. The paper will present a range of 2D fluid-mapping and 3D wind tunnel studies (Melaragno 1982) which have been correlated with the transportation characteristics of an ember laden air-field (Cheney and Sullivan 1997). Working with a range of generic building types the paper also introduces simple spatial modelling techniques which are being developed to illustrate the relationship between ember capture and changes in wind speed and air pressure.

Combating homophobia : preliminary results of a school-based program to reduce discrimination against same-sex attracted youth

Two key determinants of mental health are (a) freedom from discrimination and (b) social connectedness. Same-sex attracted youth who are subjected to violence and discrimination, or who experience homophobia in their everyday lives are at greater risk of mental health problems, including suicidal thoughts and behaviours. As one of the most significant sites of homophobia is the school, a 6-week school-based program designed to help students explore their attitudes to gays and lesbians was developed, called “Pride & Prejudice”. In order to evaluate the usefulness of the program, students’ attitudes were measured before and after their participation. Variables assessed were: beliefs about gender roles, social desirability, attitudes to gay men and lesbians, social connectedness, self-esteem, and attitudes to race. Attitudes towards gay men held by students were significantly more positive after the program, and the level of attendance during the program significantly predicted > this change. A significant positive change also occurred in attitudes towards lesbians. Process evaluation showed that students generally viewed the program positively. From this preliminary data, it can be concluded that school-based programs delivered to individual classes in which students are given the opportunity to explore their attitudes towards lesbians and gay men are likely to lead to a significant reduction in homophobia. Health-promoting schools now have available to them an effective tool for promoting opportunities for students to reflect on their attitudes towards gay men and lesbians, and other aspects of “social diversity”. It is hoped that school-wide implementation of such a program will eventually lead to a reduction in the discrimination same-sex attracted youth often experience (either directly, or indirectly), and improve the social-connectedness of all students.

EBSD analysis of a Ti-IF steel subjected to hot torsion in the ferritic region

The effect of grain size on the warm deformation behaviour of a titanium stabilized interstitial free steel was investigated using hot torsion. Tests were performed at temperatures between 765 °C and 850 °C at strain rates between 0.003 s−1 and 1 s−1 for samples with grain sizes of 25 μm, 75 μm and 150 μm. The structures were observed using EBSD analysis and are consistent with those expected for materials dominated by dynamic recovery. Some evidence was found for small amounts of thermally induced migration of pre-existing boundary (bulging) and for the generation of new segments of high angle boundaries by continuous dynamic recrystallization. The early onset of a steady-state flow stress in the finer grained samples is attributed to one or a combination of thermally induced boundary migration and enhanced rates of recovery near subgrain (and grain) boundaries.

Factors influencing attitudes to violence against women

Attitudes toward men's violence against women shape both the perpetration of violence against women and responses to this violence by the victim and others around her. For these reasons, attitudes are the target of violence-prevention campaigns. To improve understanding of the determinants of violence against women and to aid the development of violence-prevention efforts, this article reviews the factors that shape attitudes toward violence against women. It offers a framework with which to comprehend the complex array of influences on attitudes toward violent behavior perpetrated by men against women. Two clusters of factors, associated with gender and culture, have an influence at multiple levels of the social order on attitudes regarding violence. Further factors operate at individual, organizational, communal, or societal levels in particular, although their influence may overlap across multiple levels. This article concludes with recommendations regarding efforts to improve attitudes toward violence against women.

Lateral strength of zero bond masonry walls subjected to wind loads

Masonry walls are usually laid with the individual masonry units along a course overlapping units in the course below. Commonly, the perpend joints in the course occur above the mid-points of the units below to form a ‘half-bond’ or above a third point to form a ‘third-bond’. The amount of this overlap has a profound influence on the strength of a wall supported on three or four sides, where lateral pressures from wind cause combined vertical and horizontal flexure. Where masonry units are laid with mortar joints, the torsional shear bond resistance between the mortar and overlapping units largely determines the horizontal flexural strength. If there is zero bond strength between units, then the horizontal flexural strength is derived from the frictional resistance to torsion on the overlapping bed-faces of the units. This thesis reports a theoretical and experimental investigation into the frictional properties of overlapping units when subjected to combinations of vertical and horizontal moments and vertical axial compression. These basic properties were used to develop a theory to predict the lateral strength of walls supported on two, three or four sides. A plastic theory of behaviour was confirmed by experiment. The theory was then used to determine maximum unbraced panel sizes for particular boundary conditions. Design charts were developed to determine temporary bracing requirements for panels during construction.