Effect of disinfection and accelerated ageing on dimensional stability and detail reproduction of a facial silicone with nanoparticles

The aim of the present study was to evaluate the effect of disinfection and accelerated ageing on the dimensional stability and detail reproduction of a facial silicone with different types of nanoparticle. A total of 60 specimens were fabricated with Silastic MDX 4-4210 silicone and they were divided into three groups: colourless and pigmented with nanoparticles (make-up powder and ceramic powder). Half of the specimens of each group were disinfected with Efferdent tablets and half with neutral soap for 60 days. Afterwards, all specimens were subjected to accelerated ageing. Both dimensional stability and detail reproduction tests were performed after specimen fabrication (initial period), after chemical disinfection, and after accelerated ageing periods (252, 504 and 1008 hours). The dimensional stability test was conducted using AutoCAD software, while detail reproduction was analysed using a stereoscope magnifying glass. Dimensional stability values were statistically evaluated by analysis of variance (ANOVA) followed by Tukey's test (p < 0.01). Detail reproduction results were compared using a score. Chemical disinfection and also accelerated ageing affected the dimensional stability of the facial silicone with statistically significant results. The silicone's detail reproduction was not affected by these two factors regardless of nanoparticle type, disinfection and accelerated ageing. © 2012 Informa UK, Ltd.

Chemical stability and electrical properties of Nb doped BaCe 0.9Y 0.1O 3-δ as a high temperature proton conducting electrolyte for IT-SOFC

BaCe 0.9-xNb xY 0.1O 3-δ (where x=0, 0.01, 0.03 and 0.05) powders were synthesized by solid-state reaction to investigate the influence of Nb concentration on chemical stability and electrical properties of the sintered samples. The dense electrolyte pellets were formed from the powders after being uniaxially pressed and sintered at 1550 °C. The electrical conductivities determined by impedance measurements in temperature range of 550-750 °C in different atmospheres (dry argon and wet hydrogen) showed a decreasing trend with an increase of Nb content. For all samples higher conductivities were observed in the wet hydrogen than in dry argon atmosphere. The chemical stability was enhanced with increasing of Nb concentration. It was found that BaCe 0.87Nb 0.03Y 0.1O 3-δ is the optimal composition that satisfies the opposite demands for electrical conductivity and chemical stability, reaching 0.8×10 -2 S cm -1 in wet hydrogen at 650 °C compared to 1.01×10 -2 S cm -1 for undoped electrolyte. © 2012 Elsevier Ltd and Techna Group S.r.l.

The impact of remittances on macroeconomic stability: the cases of Mexico and Central America

Includes bibliography

Development and Validation of A Stability-Indicating Mekc Method for Determination of Flucloxacillin Sodium in Capsules

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

The conservation of number and location of 18S sites indicates the relative stability of rDNA in species of Pentatomomorpha (Heteroptera)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Seedling Development and Evaluation of Genetic Stability of Cryopreserved Dendrobium Hybrid Mature Seeds

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Multivariate Development and Validation of a Stability-Indicating HPLC Method for the Determination of Glimepiride in Tablets

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Poly(epsilon-caprolactone) nanocapsules carrying the herbicide atrazine: effect of chitosan-coating agent on physico-chemical stability and herbicide release profile

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effects of aging procedures on the topographic surface, structural stability, and mechanical strength of a ZrO2-based dental ceramic

Objective. To determine the effects of different aging methods on the degradation and flexural strength of yttria-stabilized tetragonal zirconia (Y-TZP)Methods. Sixty disc-shaped specimens (0, 12 mm; thickness, 1.6 mm) of zirconia (Vita InCeram 2000 YZ Cubes, VITA Zahnfabrik) were prepared (ISO 6872) and randomly divided into five groups, according to the aging procedures (n=10): (C) control; (M) mechanical cycling (15,000,000 cycles/3.8 Hz/200N); (T) thermal cycling (6,000 cycles/5-55 degrees C/30 s); (TM) thermomechanical cycling (1,200,000 cycles/3.8 Hz/200N with temperature range from 5 C to 55 C for 60s each); (AUT) 12h in autoclave at 134 degrees C/2 bars; and (STO) storage in distilled water (37 degrees C/400 days). After the aging procedures, the monoclinic phase percentages were evaluated by X-ray diffraction (XRD), and topographic surface analysis was performed by 3D profilometry. The specimens were then subjected to biaxial flexure testing (1 mm/min, load 100 kgf, in water). The biaxial flexural strength data (MPa) were analyzed by 1-way ANOVA and Tukey's test (alpha = 0.05). The data for monoclinic phase percentage and profilometry (Ra) were analyzed by Kruskal-Wallis and Dunn's tests.Results. ANOVA revealed that flexural strength was affected by the aging procedures (p = 0.002). The M (781.6 MPa) and TM (771.3 MPa) groups presented lower values of flexural strength than did C (955 MPa), AUT (955.8 MPa), T (960.8 MPa) and STO (910.4 MPa). The monoclinic phase percentage was significantly higher only for STO (12.22%) and AUT (29.97%) when compared with that of the control group (Kruskal-Wallis test, p = 0.004). In addition, the surface roughnesses were similar among the groups (p = 0.165).Signcance. Water storage for 400 days and autoclave aging procedures induced higher phase transformation from tetragonal to monoclinic; however, they did not affect the flexural strength of Y-TZP ceramic, which decreased only after mechanical and thermomechanical cycling. (C) 2014 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Stability, characterization and functionality of proton conducting NiO-BaCe0.85-xNbxY0.15O3-delta cermet anodes for IT-SOFC application

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

SAXS Studies of the Endoglucanase Cel12A from Gloeophyllum trabeum Show Its Monomeric Structure and Reveal the Influence of Temperature on the Structural Stability of the Enzyme

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of rosemary (Rosmarinus officinalis) extracts on the oxidative stability and sensory acceptability of soybean oil

Background: Plant extracts have b een used as an alternative to the use of synthetic antioxidants in order to preserve oils fromoxidative degradation. Additionally, these extracts add special flavors and aromas to the food. Thus, the objective of this studywas to evaluate the effect of hydroethanolic extracts of fresh and freeze-dried rosemar y in the oxidative stability of soybean oilunder accelerated storage in an oven. Results: The application of the extracts in the oil showed that that freeze-dried extract was better in reducing the formation ofoxidation products, showing 8.6 meq kg−1of peroxides after 20 days of storage. On the other hand, the mixture of the naturalextract with t-butylhydroquinone conferred better oxidative stability index until the 20th day, 9.7 h. Both extracts prevented theloss of tocopherol, not d iffering between each other (P > 0.05), and present approximately 505 mg kg−1of residual tocopherols.The sensory evaluation revealed that consumers accepted equally the oils added and not added of the rosemary extracts. Conclusion: The extracts are therefore potential sources of natural antioxidants and they would be well accepted by consumersif applied by the food industry to replace synthetic antioxidants.

Effects of immersion media and repolishing on color stability and superficial morphology of nanofilled composite resin

This study evaluated the influence of fluoride mouth rinses and repolishing on the superficial morphology and color stability of nanofilled resin. About 150 specimens were prepared and polished using aluminum oxide discs for 15 s with a pressure of 2 kg. The experimental groups were divided according to the immersion medium (artificial saliva, 0.5% sodium fluoride, Fluordent Reach, Oral B, Fluorgard) and repolishing procedure (without and with). The specimens were continuously immersed for 1 week. Thereafter, half of each sample was repolished. A color reading was performed after 24 h of immersion in the artificial saliva baseline, after continuous immersion, and after repolishing. The superficial morphology was examined using scanning electron microscopy (SEM) in a qualitative way. Color change (∆E) data were submitted to a mixed analysis of variance using a Shapiro-Wilk test (p>0.05 for the different immersion media) and Sidak's test (p<0.05 for the differences between groups). In the interaction between the repolishing and the immersion media, Fluorgard showed a statistical difference between the ∆E values with and without repolishing (p<0.0001). On the SEM observations, both Fluordent Reach and Fluorgard caused degradation of the superficial resinous matrix of the composite after continuous immersion. This matrix was removed after repolishing.

Productivity, stability and adaptability in open pollination progenies of Eucalyptus urophylla ST Blake

Prediction of genetic gains within breeding programs is not always compatible with those observed in practice. One reason for this inconsistency is the lack of knowledge of genotype-environment interaction (GxE). The aim of this study was to estimate genetic variation, evaluate the GxE, investigate the genetic correlation between pairs of environments and for the set, and to study the productivity, stability and adaptability at 2 years of age for diameter at breast height (DBH) in five progenies trials of Eucalyptus urophylla, used in a randomized complete block design, with the number of progenies ranging from 138 to 167, four to eight blocks and five to six plants per plot. Estimates of variance components and genetic parameters were obtained using the REML/BLUP method. For analysis of productivity, stability and adaptability, the HMRPGV method was used. The highest DBH growth was observed in Anhembi (10.52 cm) and Uberaba (10.20 cm). Estimates considered high were obtained for the coefficient of individual additive genetic variation (>13.3%) and average heritability among progenies (>0.40), indicating the possibility of obtaining genetic gains by selection among progenies. The coefficient of determination of the GxE was 1.7%, a fact that led to a high value of genotypic correlation between the performance of the progenies and environments (78.1%), indicating that the interaction is simple. The first six progenies showed a coincidence of 100% in the order of stability (HMGV), adaptability (RPGV) and productivity (HMRPGV), being 13% higher than the overall mean of five experiments (9.21 cm). When ordering the progenies, the selection of the 20 best in growth led to an increase in gain ranging of from 10.4 to 70%. Anhembi is the ideal place to have a breeding population which will be good in the other places as well.

Thermal stability and thermal decomposition of the antihypertensive drug amlodipine besylate

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)