La Cooperativa Arroceros Villa Elisa, un buen ejemplo de la tradición cooperativista de Entre Ríos (Argentina)

Así como la Historia reconoce a Entre Ríos como cuna de la colonización, es también en esta provincia donde desde el comienzo del siglo XX se desarrolla el cooperativismo agrario que presta importantes servicios al asociado en materia de abastecimiento, comercialización y transformación. Prestación que se traduce en un uso más racional de la tierra, un mayor volumen de negocios, el mejoramiento en la calidad del producto, la utilización eficiente del capital, el aumento de la demanda por la ampliación de los mercados y la introducción de servicios que cada agricultor por si sólo no podría alcanzar. El presente artículo se propone analizar la trayectoria de una cooperativa arrocera -fundada en la década de 1970- ubicada en la localidad entrerriana de Villa Elisa que en mayor o menor media ha ido cumpliendo con esas prestaciones y que hoy se posiciona como el tercer exportador nacional de arroz y el primero de gestión cooperativa. Más allá de las cuestiones económicas, se prestará especial atención a la articulación interinstitucional de la empresa y a los cambios introducidos a nivel organizacional

La Cooperativa Arroceros Villa Elisa, un buen ejemplo de la tradición cooperativista de Entre Ríos (Argentina)

Así como la Historia reconoce a Entre Ríos como cuna de la colonización, es también en esta provincia donde desde el comienzo del siglo XX se desarrolla el cooperativismo agrario que presta importantes servicios al asociado en materia de abastecimiento, comercialización y transformación. Prestación que se traduce en un uso más racional de la tierra, un mayor volumen de negocios, el mejoramiento en la calidad del producto, la utilización eficiente del capital, el aumento de la demanda por la ampliación de los mercados y la introducción de servicios que cada agricultor por si sólo no podría alcanzar. El presente artículo se propone analizar la trayectoria de una cooperativa arrocera -fundada en la década de 1970- ubicada en la localidad entrerriana de Villa Elisa que en mayor o menor media ha ido cumpliendo con esas prestaciones y que hoy se posiciona como el tercer exportador nacional de arroz y el primero de gestión cooperativa. Más allá de las cuestiones económicas, se prestará especial atención a la articulación interinstitucional de la empresa y a los cambios introducidos a nivel organizacional

La Cooperativa Arroceros Villa Elisa, un buen ejemplo de la tradición cooperativista de Entre Ríos (Argentina)

Así como la Historia reconoce a Entre Ríos como cuna de la colonización, es también en esta provincia donde desde el comienzo del siglo XX se desarrolla el cooperativismo agrario que presta importantes servicios al asociado en materia de abastecimiento, comercialización y transformación. Prestación que se traduce en un uso más racional de la tierra, un mayor volumen de negocios, el mejoramiento en la calidad del producto, la utilización eficiente del capital, el aumento de la demanda por la ampliación de los mercados y la introducción de servicios que cada agricultor por si sólo no podría alcanzar. El presente artículo se propone analizar la trayectoria de una cooperativa arrocera -fundada en la década de 1970- ubicada en la localidad entrerriana de Villa Elisa que en mayor o menor media ha ido cumpliendo con esas prestaciones y que hoy se posiciona como el tercer exportador nacional de arroz y el primero de gestión cooperativa. Más allá de las cuestiones económicas, se prestará especial atención a la articulación interinstitucional de la empresa y a los cambios introducidos a nivel organizacional

Japanese import survey : descriptive analysis

Food importers, such as wholesalers and food processing firms, play an important role in sourcing food from abroad. They are also responsible for ensuring that imported food meets the food safety standards of the importing country. Often, assurance of conformity is done in collaboration with exporters. Thus, importers can influence how supply chains in developing countries are organized. This paper uses a unique dataset obtained from the Japanese market to examine how importers select suppliers and assure food quality.

Clasificación visual estructural de la madera de pino radiata procedente de Cataluña

Se han clasificado visualmente, según la norma española UNE 56544; 150 piezas de madera aserrada de pino radiata procedentes de Cataluña (España) con una sección de 80x150 mm y una longitud de 2.500 mm. Esta norma establece dos calidades visuales (ME-1 y ME-2) para piezas con grueso menor o igual que 70 mm y una única calidad visual (MEG) para gruesos mayores de 70 mm. Con el fin de conocer el efecto frontera entre la pequeña y la gran escuadría se clasificaron las piezas según ambas categorías. Se determinó la tensión de rotura en flexión, el módulo de elasticidad en flexión y la densidad de cada pieza mediante el ensayo de acuerdo con la norma UNE-EN 408 siguiendo los ajustes definidos en la norma UNE-EN 384. Un 53 % de las piezas se clasificaron como MEG con una resistencia característica a flexión de 28 N/mm2 y un valor medio del módulo de elasticidad de 9.900 N/mm2. Por otra, un 42 % de las piezas se clasificaron como ME-2 y sólo un 3 % como ME-1; en este caso las propiedades mecánicas de la calidad ME-2 no se alejan mucho de las de la calidad MEG. El elevado porcentaje de piezas rechazadas (47 % frente a la MEG) se debe principalmente al defecto de alabeo responsable de un 39 % de rechazo. Si no se considera el alabeo en la clasificación el porcentaje de rechazo desciende al 17 % y las propiedades mecánicas de la calidad MEG presentan un valor característico de resistencia a flexión de 21 N/mm2 y un módulo de elasticidad de 9.100 N/mm2. A sample of 150 pieces of radiata pine sawn timber with 180x120 mm in cross-section and 2.500 mm in length sourcing from Catalonia (Spain) were visually graded according to Spanish standard UNE 56544. This standard establish two visual grades (ME-1 and ME-2) for timber pieces with thickness equal or less than 70 mm, and one grade (MEG) for thickness bigger than 70 mm. In order to know the border effect between small and larger cross-section the pieces were graded in both categories. The modulus of rupture, modulus of elasticity and density were obtained by test according to EN 408 standard and the adjustments of EN 384. A 53 % of pieces were classified as MEG with a characteristic bending strength of 28 N/mm2 and a mean value of MOE of 9.900 N/mm2. On the other hand, a 42 % of pieces were classified as ME-2 and only a 3 % as ME-1; in this case the mechanical properties of ME-2 are not far from MEG properties. The high percentage of rejected pieces (47 % vs MEG) is mainly due to the twist defect with a 39 % of rejected pieces. If twist is not considered in the grading process the reject percentage decreases to 17 % and the mechanical properties of MEG grade present a characteristic value of bending strength of 21 N/mm2 and a MOE of 9.100 N/mm2.

La financiación y la inversión inmobiliaria : repercusiones en el urbanismo y la arquitectura

El presente trabajo de tesis doctoral tiene por finalidad demostrar que las decisiones de financiación y de inversión inmobiliaria en España influyen de manera determinante en la configuración del proceso urbanístico y arquitectónico. Este planteamiento inicial obliga a formular las siguientes cuestiones: - En una primera fase, la situación en España del sector inmobiliario y su relación con el sector financiero en el contexto de la actual crisis financiera, iniciada en el año 2008. - Los métodos de análisis y selección de inversiones y su aplicación a los proyectos de inversión en función de la naturaleza de los activos inmobiliarios. - La valoración inmobiliaria para determinadas entidades financieras. - Características de la gestión financiera empresarial y de las empresas inmobiliarias. - El origen de fondos para financiar el proceso urbanístico y arquitectónico mediante las instituciones de inversión colectiva inmobiliaria y el mercado inmobiliario. - La regulación actual en España, a nivel estatal, del suelo como materia prima del sector inmobiliario. - La edificación residencial y el mercado inmobiliario en el actual contexto económico. - La posibilidad de crear en España un mercado de derivados basado en activos inmobiliarios. - Cómo repercute la actividad económica, a través de la inversión y la financiación, en los activos inmobiliarios, en el urbanismo y la arquitectura. Las cuestiones precedentes se resuelven de forma sistemática y metodológica en esta tesis doctoral estructurada en tres grandes bloques (inversión, financiación y repercusiones en el urbanismo y la arquitectura), obteniendo una serie de respuestas reflejadas en el desarrollo del presente trabajo que se sintetizan en las siguientes líneas: - La actual crisis financiera iniciada en el año 2008 ha provocado en España el colapso del sector inmobiliario y una nueva concepción en la naturaleza de los activos inmobiliarios. El sector inmobiliario trae causa del sector financiero, en especial del crédito bancario. - Dependencia y vinculación del sector inmobiliario español de la política monetaria europea: la incorporación de España a la moneda única transforma por completo el sector inmobiliario español. - Los métodos de análisis y selección de inversiones se conforman como instrumentos relevantes que nos permiten jerarquizar nuestros proyectos. No obstante, presentan una serie de limitaciones y dificultades de aplicación práctica, por lo que no deben considerarse como herramientas que nos aporten una única solución irrefutable. - La valoración de activos inmobiliarios se constituye en un pilar básico que fundamenta la correcta aplicación de los fondos. - La inversión en activos inmobiliarios puede realizarse de forma directa o indirecta. En este último supuesto, con una influencia relevante de las innovaciones financieras surgidas en los últimos años. - Las instituciones de inversión colectiva y el mercado hipotecario constituyen instituciones fundamentales capaces de captar importantes cantidades de fondos que impulsan y financian el proceso urbanístico y arquitectónico. - El complejo y cambiante sistema jurídico español en materia de suelo, dificulta la implementación de los procesos urbanísticos y arquitectónicos. - Tras la crisis financiera de 2008, los activos inmobiliarios tienen un comportamiento similar a otros activos en cuanto a subidas y bajadas de precios. En el actual sistema económico, la especulación forma parte inherente a la naturaleza de los activos inmobiliarios. - Desde una perspectiva teórica, existe la posibilidad de crear un mercado de derivados que tenga como subyacente activos de naturaleza inmobiliaria. - Sin actividad económica, el proceso urbanístico y arquitectónico carecerá finalmente de sentido y tenderá a desaparecer. No obstante, son las innovaciones tecnológicas, a nivel de producto y proceso, las principales causantes del impulso de la actividad económica. - A pesar de lo expresado en los documentos urbanísticos internacionales, la transformación del urbanismo y la arquitectura dependen principalmente de la actividad económica y la tecnología. En un segundo nivel, la inversión y la financiación condicionan y definen el urbanismo y la arquitectura, incluso a nivel de proyecto si se pretende su materialización. En base al desarrollo previo, el objetivo fundamental de esta tesis doctoral ha sido demostrar que las decisiones de financiación y de inversión tienen una importancia capital y determinan la configuración de los activos inmobiliario, del urbanismo y la arquitectura, por lo que deben ser tenidas en cuenta no sólo en su materialización sino incluso en la propia concepción del proceso creativo. ABSTRACT The present dissertation aims to show that real estate financing and investment decisions in Spain play a predominant role in structuring urban development and architectural solutions. The issues addressed to support that contention include: - As a preliminary study, the situation of the real estate industry in Spain and its relationship to the financial sector in the context of the 2008 financial crisis. - The methods used to analyse and select investments and their application to investment projects, by type of real estate asset. - Appraisal of certain financial institutions’ real estate asset holdings. - Characteristics of financial institution and real estate company corporate management. - Sourcing funds for financing urban development and architecture through real estate investment trusts and the real estate market. - Present nation-wide regulations on landed property in Spain as a raw material for the real estate industry. - Residential building construction and the real estate market in the present economic context. - The possibility of creating a real estate asset-based derivatives market in Spain - The impact of economic activity, through investment and financing, on real estate assets, urban development and architecture. The aforementioned issues are addressed systematically and methodically in this dissertation, which is divided into three major units: investment, financing, and impact on urban development and architecture. The conclusions drawn are summarised below. - The financial crisis that began in 2008 has induced the collapse of the Spanish real estate industry and spawned a new perception of the nature of real estate assets. The real estate industry is dependent upon the financial sector, in particular on bank loans. - The Spanish real estate industry also depends on and is related to European monetary policy: Spain’s adherence to the single currency ushered in a thorough overhaul of its real estate industry. - Investment analysis and selection methods constitute highly suitable tools for project evaluation and ranking. Nonetheless, inasmuch as their practical implementation is subject to a series of limitations and difficulties, they should not be thought able to deliver a single irrefutable solution. - Real estate asset appraisal is a mainstay to the rightful application of funds. - Real estate asset investments can be made directly or indirectly. The latter approach is heavily influenced by the financial innovations forthcoming in recent years. - Investment trusts and the mortgage market are key institutions able to raise substantial funding, thereby driving and financing urban development and architecture. - Spain’s complex and changing legal provisions on land management are an obstacle to urban development and architecture. - Since the 2008 crisis, real estate assets have behaved much like other assets in terms of rising and falling prices. In the present economic context, speculation is indivisible from real estate assets. - Theoretically speaking, a derivatives market with real estate holdings as the underlying assets lies within the realm of possibility. - In the absence of economic activity, urban development and architecture are senseless pursuits and tend to disappear. Technological innovation in products and processes are the main drivers of economic activity. - Despite the opinion expressed in international papers on the subject, the transformation of urban development and architecture depend primarily on economic activity and technology. In a second dimension, investment and financing condition and define urban development and architecture, even at the design level for projects aspiring to actual construction. Pursuant to the foregoing, the primary aim of this dissertation is to show that financial and investment decisions are of cardinal importance and determine the structure of real estate assets, urban development and architecture. They must consequently be borne in mind not only in connection with implementation, but also with conceptual design and the creative process itself. I

Capacidad y comportamiento de la adsorción de fenol en caolines naturales y modificados

En la actualidad las industrias químicas, farmacéuticas y clínicas, originan contaminantes en aguas superficiales, aguas subterráneas y suelos de nuestro país, como es el caso del fenol, contaminante orgánico común y altamente dañino para los organismos, incluso a bajas concentraciones. Existen en el mercado diferentes metodologías para minimizar la contaminación pero muchos de estos procesos tienen un alto coste, generación de contaminantes, etc. La adsorción de contaminantes por medio de arcillas es un método ampliamente utilizado, encontrándose eficaz y económico. Pero la dificultad de adsorber un contaminante orgánico como el fenol motiva la creación de un material llamado organoarcillas. Las organoarcillas son arcillas modificadas con un surfactante, a su vez, los surfactantes son moléculas orgánicas que confieren a la superficie de la arcilla carga catiónica en lugar de aniónica, haciendo más fácil la adsorción de fenol. Para esta tesis se ha elegido el caolín como material adsorbente, fácilmente disponible y relativamente de bajo coste. Se ha trabajado con: arenas de caolín, material directo de la extracción, y caolín lavado, originado del proceso de lavado de las arenas de caolín. Ambos grupos se diferencian fundamentalmente por su contenido en cuarzo, ampliamente mayor en las arenas de caolín. Con el objetivo de desarrollar un material a partir del caolín y arenas de éste con capacidad de retención de contaminates, en concreto, fenol, se procedió a modificar los materiales de partida mediante tratamientos térmicos, mecánicos y/o químicos, dando lugar a compuestos con mayor superficie química reactiva. Para ello se sometió el caolín y las arenas caoliníferas a temperaturas de 750ºC durante 3h, a moliendas hasta alcanzar su amorfización, y/o a activaciones con HCl 6M o con NaOH 5M durante 3h a 90ºC. En total se obtuvieron 18 muestras, en las que se estudiaron las características físico-químicas, mineralógicas y morfológicas de cada una de ellas con el fin de caracterizarlas después de haber sufrido los tratamientos y/o activaciones químicas. Los cambios producidos fueron estudiados mediante pH, capacidad de intercambio catiónico (CEC), capacidad de adsorción de agua (WCU y CWC), distribución de tamaño de partícula (PSD), área de superficie específica (SBET), difracción de rayos X (XRD), espectroscopía infrarroja por transformada de Fourier (FTIR), métodos térmicos (TG, DTG y DTA), y microscopía electrónica de transmisión y barrido (SEM y TEM). Además se analizó los cambios producidos por los tratamientos en función de las pérdidas de Al y Si que acontece en las 18 muestras. Los resultados para los materiales derivados de la arenas caoliníferas fueron similares a los obtenidos para los caolines lavados, la diferencia radica en la cantidad de contenido de caolinita en los diferente grupos de muestras. Apoyándonos en las técnicas de caracterización se puede observar que los tratamientos térmico y molienda produce materiales amorfos, este cambio en la estructura inicial sumado a las activaciones ácida y alcalina dan lugar a pérdidas de Si y Al, ocasionando que sus propiedades físico-químicas, mineralógicas y morfológicas se vean alteradas. Un fuerte aumento es observado en las áreas superficiales y en la CEC en determinadas muestras, además entre los cambios producidos se encuentra la producción de diferentes zeolitas en porcentajes distintos con el tratamiento alcalino. Para la obtención de las organoarcillas, las 18 muestras se sometieron a la surfactación con hexadeciltrimetil amonio (HDTMA) 20 mM durante 24h a 60ºC, esta concentración de tensioactivo fue más alta que la CEC de cada muestra. Los camext bios anteriormente producidos por los tratamientos y activaciones, afectan de forma diferente en la adsorción de HDTMA, variando por tanto la adsorción del surfactante en la superficie de las muestras. Se determinó el tensioactivo en superficie por FTIR, además se realizó un análisis de componentes principales (PCA) para examinar la dependencia entre las relaciones Si/Al de las muestras en la capacidad de adsorción de tensioactivo, y para el estudio de la adsorción de HDTMA en las muestras se realizaron además del análisis termogravimétrico, aproximaciones con los modelos de Freundllich y Langmuir. Se persigue conocer las diferentes formas y maneras que tiene el tensioactivo de fijarse en la superficie de las muestras. En las organoarcillas resultantes se cuantificó el fenol adsorbido cuando éstas fueron puestas en contacto con diferentes concentraciones de fenol: 50, 500, 1000, 2000, y 2500 mg/l durante 24h. El contaminante sorbido se calculó por medio de cromatografía de gases, y se realizaron aproximaciones con los modelos de Freundllich y Langmuir. El comportamiento de adsorción de fenol en arcillas orgánicas es regido por las características de las muestras. De forma general se puede decir que las muestras de caolines lavados tienen más capacidad de adsorción de fenol que las muestras de arenas de caolín y que la activación alcalina ha proporcionado una mejora en la adsorción de fenol en los dos grupos. En consecuencia se han obtenido materiales adsorbentes heterogéneos y por tanto, con propiedades diferentes. Se ha evaluado el comportamiento global de las arenas de caolín por un lado y del caolín lavado por otro. Las arenas de caolín presentan altos niveles de cuarzo y su uso para ciertos tipos de industrias no son recomendados en ocasiones por el alto costo que el proceso de limpieza y purificación implicaría. Por ello es importante reseñar en este proyecto las aplicaciones que ofrecen algunas muestras de este grupo. Los ensayos acontecidos en esta tesis han dado lugar a las siguientes publicaciones: • Pérdida de Al y Si en caolines modificados térmica- o mecánicamente y activados por tratamientos químicos. A. G. San Cristóbal, C Vizcayno, R. Castelló. Macla 9, 113-114. (2008). • Acid activation of mechanically and thermally modfied kaolins. A. G. San Cristóbal, R. Castelló, M. A. Martín Luengo, C Vizcayno. Mater. Res. Bull. 44 (2009) 2103-2111. • Zeolites prepared from calcined and mechanically modified kaolins. A comparative study. A. G San Cristóbal, R. Castelló, M. A. Martín Luengo, C Vizcayno. Applied Clay Science 49 (2010) 239-246. • Study comparative of the sorption of HDTMA on natural and modified kaolin. A. G San Cristóbal, R. Castelló, J. M. Castillejo, C Vizcayno. Aceptada en Clays and Clay minerals. • Capacity of modified kaolin sand and washed kaolin to adsorb phenol. A. G San Cristóbal, R. Castelló, C Vizcayno. Envío a revista sujeto a la publicación del artículo anterior. ABSTRACT Today’s chemical, pharmaceutical and clinical industries generate pollutants that affect the soils and surface and ground waters of our country. Among these, phenol is a common organic pollutant that is extremely harmful to living organisms, even at low concentrations. Several protocols exist to minimize the effects of pollutants, but most are costly procedures or even generate other pollutants. The adsorption of hazardous materials onto clays is perhaps the most used, efficient and cost-saving method available. However, organic compounds such as phenol are difficult to adsorb and this has led to the development of materials known as organoclays, which are much better at remediating organic compounds. Organoclays are clays that have been modified using a surfactant. In turn, surfactants are organic molecules that confer a cationic rather than anionic charge to the clay surface, improving it’s capacity to adsorb phenol. For this doctorate project, kaolin was selected as an adsorbent material for the removal of phenol given its easy sourcing and relatively low cost. The materials investigated were kaolin sand, a directly extracted material, and washed kaolin, which is the byproduct of the kaolin sand washing process. The main difference between the materials is their quartz content, which is much higher in the kaolin sands. To generate a product from kaolin or kaolin sand capable of retaining organic pollutants such as phenol, both materials were subjected to several heat, chemical and/or mechanical treatments to give rise to compounds with a greater reactive surface area. To this end the two starting materials underwent heating at 750ºC for 3 h, grinding to the point of amorphization and/or activation with HCl 6M or NaOH 5M for 3 h at 90ºC. These treatments gave rise to 18 processed samples, which were characterized in terms of their morphological, mineralogical, and physical-chemical properties. The behaviour of these new materials was examined in terms of their pH, cation exchange capacity (CEC), water adsorption capacity (WCU and WCC), particle size distribution (PSD), specific surface area (SBET), and their X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), thermal (DTG, DTA) and scanning and transmission electron microscopy (SEM and TEM) properties. The changes conferred by the different treatments were also examined in terms of Al and Si losses. Results for the materials derived from kaolin sands and washed kaolin were similar, with differences attributable to the kaolinite contents of the samples. The treatments heat and grinding produced amorphous materials, which when subjected to acid or alkali activation gave rise to Si and Al losses. This in turn led to a change in physico- chemical, mineralogical and morphological properties. Some samples showed a highly increased surface area and CEC. Further, among the changes produced, alkali treatment led to the generation of zeolites in different proportions depending on the sample. To produce the organoclays, the 18 samples were surfacted with hexadecyltrimethylammonium (HDTMA) 20 mM for 24 h at 60ºC. This surfactant concentration is higher than the CEC of each sample. The amount of HDTMA adsorbed onto the surface of each sample determined by FTIR varied according to treatment. A principle components analysis (PCA) was performed to examine correlations between sample Si/Al ratios and surfactant adsorption capacity. In addition, to explore HDTMA adsorption by the samples, DTG and DTA data were fitted to Freundllich and Langmuir models. The mechanisms of surfactant attachment to the sample surface were also addressed. The amount of phenol adsorbed by the resultant organoclays was determined when exposed to different phenol concentrations: 50, 500, 1000, 2000, and 2500 mg/l for 24 h. The quantity of adsorbed pollutant was estimated by gas chromatography and the data fitted to the models of Freundllich and Langmuir. Results indicate that the phenol adsorption capacity of the surfacted samples is dependent on the sample’s characteristics. In general, the washed kaolin samples showed a greater phenol adsorption capacity than the kaolon sands and alkali activation improved this capacity in the two types of sample. In conclusion, the treatments used gave rise to adsorbent materials with varying properties. Kaolin sands showed high quartz levels and their use in some industries is not recommended due to the costs involved in their washing and purification. The applications suggested by the data obtained for some of the kaolin sand samples indicate the added value of this industrial by-product. The results of this research project have led to the following publications: • Pérdida de Al y Si en caolines modificados térmica- o mecánicamente y activados por tratamientos químicos. A. G. San Cristóbal, C Vizcayno, R. Castelló. Macla 9, 113-114. (2008). • Acid activation of mechanically and thermally modfied kaolins. A. G. San Cristóbal, R. Castelló, M. A. Martín Luengo, C Vizcayno. Mater. Res. Bull. 44 (2009) 2103-2111. • Zeolites prepared from calcined and mechanically modified kaolins. A comparative study. A. G. San Cristóbal, R. Castelló, M. A. Martín Luengo, C Vizcayno. Applied Clay Science 49 (2010) 239-246. • Study comparative of the sorption of HDTMA on natural and modified kaolin. A. G. San Cristóbal, R. Castelló, J. M. Castillejo, C Vizcayno Accepted in Clays and Clay minerals. • Capacity of modified kaolin sand and washed kaolin to adsorb phenol. A. G San Cristóbal, R. Castelló, C Vizcayno. Shipment postponed, subject to the publication of the previous article.

Interisland and interarchipelago transfer of stone tools in prehistoric Polynesia.

Tracing interisland and interarchipelago movements of people and artifacts in prehistoric Polynesia has posed a challenge to archaeologists due to the lack of pottery and obsidian, two materials most readily used in studies of prehistoric trade or exchange. Here we report the application of nondestructive energy-dispersive x-ray fluorescence (EDXRF) analysis to the sourcing of Polynesian artifacts made from basalt, one of the most ubiquitous materials in Polynesian archaeological sites. We have compared excavated and surface-collected basalt adzes and adze flakes from two sites in Samoa (site AS-13-1) and the Cook Islands (site MAN-44), with source basalts from known prehistoric quarries in these archipelagoes. In both cases, we are able to demonstrate the importing of basalt adzes from Tutuila Island, a distance of 100 km to Ofu Island, and of 1600 km to Mangaia Island. These findings are of considerable significance for Polynesian prehistory, as they demonstrate the movement of objects not only between islands in the same group (where communities were culturally and linguistically related) but also between distant island groups. Further applications of EDXRF analysis should greatly aid archaeologists in their efforts to reconstruct ancient trade and exchange networks, not only in Polynesia but also in other regions where basalt was a major material for artifact production.

Paleogene-Aquitanian Tectonic Breakup in the Eastern External Betic Zone (Alicante, SE Spain)

Six Paleogene-Aquitanian successions have been reconstructed in the Alicante area (eastern External Betic Zone). The lithofacies association evidences “catastrophic” syn-sedimentary tectonic processes consisting of slumps, mega-olisthostromes, “pillow-beds” and turbiditic deposits. This kind of sedimentation is related to unconformity surfaces delimiting sequence and para-sequence cycles in the stratigraphic record. The data compiled have enabled the reconstruction of the Paleogene-Aquitanian paleogeographic and geodynamic evolution of this sector of the External Betics. During the Eocene the sedimentary basin is interpreted as a narrow trough affected by (growth) folding related to blind thrust faulting with a source area from the north-western margin, while the southeastern margin remained inactive. During the Oligocene-Aquitanian, the sourcing margin becames the southeastern margin of the basin affected by a catastrophic tectonic. The activity of the margins is identified from specific sediment source areas for the platform-slope-trough system and from tectofacies analysis. The southeastern South Iberian Margin is thought to be closer to the Internal Betic Zone, which was tectonically pushing towards the South Iberian Margin. This pushing could generate a lateral progressive elimination of subbetic paleogeographic domains in the eastern Betics. This geodynamic frame could explain the development of such “catastrophic” tectono-sedimentary processes during the Late Oligocene-Early Miocene.

#DressCodePM & Re-Framing The Niqab: News Sources, Hashtag Activism, and Media Representation

This thesis originates from my interest in exploring how minorities are using social media to talk back to mainstream media. This study examines whether hashtags that trend on Twitter may impact how news stories related to minorities are covered in Canadian media. The Canadian Prime Minister Stephen Harper stated the niqab was “rooted in a culture that is anti-women” on 10 March 2015. The next day #DressCodePM trended in response to the PM’s niqab remarks. Using network gatekeeping theory, this study examines the types of sources quoted in the media stories published on 10 and 11 March 2015. The study’s goal is to explore whether using tweet quotes leads to the representation of a more diverse range of news sources. The study compares the types of sources quoted in stories that covered Harper’s comments without mentioning #DressCodePM versus stories that mention #DressCodePM. This study also uses Tuen A. van Dijk’s methodology of asking “who is speaking, how often and how prominently?” in order to examine whose voices have been privileged and whose voices have been marginalized in covering the niqab in Canadian media from the 1970s and until the days following the PM’s remarks. Network gatekeeping theory is applied in this study to assess whether the gated gained more power after #DressCodePM trended. The case study’s findings indicates that Caucasian male politicians were predominantly used as news sources in covering stories related to the niqab for the past 38 years in the Globe and Mail. The sourcing pattern of favouring politicians continued in Canadian print and online media on 10 March 2015 following Harper’s niqab comments. However, ordinary Canadian women, including Muslim women, were used more often than politicians as news sources in the stories about #DressCodePM that were published on 11 March 2015. The gated media users were able to gain power and attract Canadian Media’s attention by widely spreading #DressCodePM. This study draws attention to the lack of diversity of sources used in Canadian political news stories, yet this study also shows it is possible for the gated media users to amplify their voices through hashtag activism.

The natural resources deficit: the implications for German politics. OSW Commentary No. 46, 2011-02-08

Falling amounts of natural resources and the ‘peak oil’ question, i.e. the point in time when the maximum rate of extraction of easily-accessible oil reserves is reached, have been among the key issues in public debate in Germany on all levels: expert, business and – most crucially – the government level. The alarming assessments of German analysts anticipate a rapid shrinkage of oil reserves and a sharp rise in oil prices, which in the longer term will affect the economic and political systems of importer countries. Concerns about the consequences of the projected resource deficit, especially among representatives of German industry, are also fuelled by the stance of those countries which export raw materials. China, which meets 97% of global demand for minerals crucial for the production of new technologies, cut its exports by 40% in summer 2010 (compared to 2009), arguing that it had to protect its reserves from overexploitation. In 2009 the value of natural resources Germany imported reached €84 billion, of which €62 billion were spent on energy carriers, and €22 billion on metals. For Germany, the shrinkage of resources is a political problem of the utmost importance, since the country is poor in mineral resources and has to acquire petroleum and other necessary raw materials abroad1. In autumn 2010, the German minister of economy initiated the establishment of a Resources Agency designed to support companies in their search for natural resources, and the government prepared and adopted a national Raw Material Strategy. In the next decade the policy of the German government, including foreign policy, will be affected by the consequences of the decreasing availability of natural resources. It can be expected that the mission of the Bundeswehr will be redefined, and the importance of African states and current exporter countries such as Russia and China for German policies will increase. At the same time, Germany will seek to strengthen cooperation among importer countries, which should make pressure on resource-exporting states more effective. In this context, it can be expected that the efforts taken to develop an EU resource strategy or even a ‘comprehensive resource policy’ will be intensified; or at least, the EU’s energy policy will permanently include the issue of sourcing raw materials.

Energy Security in Transatlantic Relations. ACES Working Papers, 2011

A country’s economic and social development depends on reliable, sustainable access to energy — at a reasonable cost. Energy security has become a growing preoccupation for all countries, especially those that rely on imports. In addition, no country wants to rely on single sourcing for their oil or gas, meaning that the diversification of supplies is also important. Today, both the US and the EU are paying much closer attention to their energy security.

The globalization of angel investments. Bruegel Working Paper 2015/09, 1 September 2015

The last decade has seen a rapid expansion and deepening of the types of vehicles that fund start-up firms in the U.S. and worldwide. In particular, we have seen a growing role of angel groups and other more “individualistic” funding options for start-ups, such as super angels or crowd sourcing platforms. Authors seek to understand the nature and consequences of angel investments across a variety of geographies with varying levels of venture capital markets and other forms of risk capital. They ask whether angel investors improve the outcomes and performance of the start-ups they invest in. Furthermore we want to understand whether and how the types of firms that seek angel funding vary with the overall entrepreneurial ecosystem in a country. Authors examine the records of 13 angel investment groups based in 12 nations and with applicants for financing transactions from 21 nations, examining both the applicants that were considered and rejected and those that were funded. Key findings from the analysis are two-fold. First, angel investors have a positive impact on the growth of the firms they fund, their performance, and survival. Second, they find that the selection of firms that apply for angel funding is different across countries.

Tomorrow's silk road: Assessing an EU-China Free Trade Agreement.

Foreword. The Foreign Trade Association, which represents the European and international distribution and retail sector, commissioned this study in light of the importance of China as a sourcing country and its attractiveness as a rapidly growing consumer market. We believe that open borders and free trade can contribute to a broader choice and lower costs for consumers and create growth and employment in both Europe and China. This independent study aims to provide an in-depth contribution on the status of bilateral economic exchanges and persistent trade barriers that exist between the European Union and China. The second objective of the report is to encourage a frank and open dialogue, based on a scientific evaluation and without prejudice, on the possibility of a preferential trade agreement between the two sides. This study should be read by anyone who is interested in economic relations between the EU and China and in trade policy in general. The report provides many interesting findings and raises a number of surprising points. Overall, this study is one of the most significant contributions to the discourse on EU-China relations in recent years. We hope that this study will stimulate fresh thoughts on the benefits of closer future cooperation between two regions that have been interlinked since the times of antiquity and the first Silk Road.

(Table 1) Sedimentary thicknesses, lithologies, ages, and interpreted paleowater depths for ODP Sites 135-840 and 135-841

The sedimentary succession drilled at Sites 840 and 841 on the Tonga forearc allows the sedimentary evolution of the active margin to be reconstructed since shortly after the initiation of subduction during the mid Eocene. Sedimentation has been dominated by submarine fan deposits, principally volcaniclastic turbidites and mass-flows derived from the volcanic arc. Volcaniclastic sedimentation occurred against a background of pelagic nannofossil sedimentation. A number of upward-fining cycles are recognized and are correlated to regional tectonic events, such as the rifting of the Lau Basin at 5.6 Ma. Episodes of sedimentation dating from 16.0 and 10.0 Ma also correlate well with major falls in eustatic sea level and may be at least partially caused by the resulting enhanced erosion of the arc edifice. The early stages of rifting of the Lau Basin are marked by the formation of a brief hiatus at Site 840 (Horizon A), probably a result of the uplift of the Tonga Platform. Controversy exists as to the degree and timing of the uplift of Site 840 before Lau Basin rifting, with estimates ranging from 2500 to 300 m. Structural information favors a lower value. Breakup of the Tonga Arc during rifting resulted in deposition of dacite-dominated, volcaniclastic mass flows, probably reflecting a maximum in arc volcanism at this time. A pelagic interval at Site 840 suggests that no volcanic arc was present adjacent to the Tonga Platform from 5.0 to 3.0 Ma. This represents the time between separation of the Lau Ridge from the Tonga Platform and the start of activity on the Tofua Arc at 3.0 Ma. The sedimentary successions at both sites provide a record of the arc volcanism despite the reworked nature of the deposits. Probe analyses of volcanic glass grains from Site 840 indicate a consistent low-K tholeiite chemistry from 7.0 Ma to the present, possibly reflecting sediment sourcing from a single volcanic center over long periods of time. Trace and rare-earth-element (REE) analyses of basaltic glass grains indicate that thinning of the arc lithosphere had begun by 7.0 Ma and was the principle cause of a progressive depletion of the high-field-strength (HFSE), REE, and large-ion-lithophile (LILE) elements within the arc magmas before rifting. Magmatic underplating of the Tofua Arc has reversed this trend since that time. Increasing fluid flux from the subducting slab since basin rifting has caused a progressive enrichment in LILEs. Subduction erosion of the underside of the forearc lithosphere has caused continuous subsidence and tilting toward the trench since 37.0 Ma. Enhanced subsidence occurred during rifting of the South Fiji and Lau basins. Collision of the Louisville Ridge with the trench has caused no change in the nature of the sedimentation, but it may have been responsible for up to 300 m of uplift at Site 840.