Species management in aquatic habitats WRc RD Interim 1997

This is the Species management in aquatic Habitats WRc Interim 1997 document produced by the Environment Agency in 1997. This document reports progress on R&D Project 640, which aims to provide information on species of conservation value of particular relevance to the Environment Agency, in relation to its activities affecting aquatic environments. A range of stand-alone outputs is being produced, comprising Species Action Plans, practical management guidelines for Agency staff and third parties, and various research outputs to improve the knowledge base on the status and ecological requirements of priority species. The species of conservation values are: water shrew, daubenton’s bat, Kingfisher, yellow wagtail, Grey wagtail, sand martin, reed bunting, dipper, marsh warbler, great crested new, spined loach, brook lamprey, river lamprey, sea lamprey, shining rams-horn snail, little whirlpool rams-horn snail, depressed river mussel, a freshwater pea mussel, native crayfish, and triangular club-rush. The process of species selection was altered during the course of the project by the report on biodiversity by the UK Biodiversity Steering Group (1995). Whilst still including species that were not particularly endangered but were greatly influenced by the activities of the Agency, the project addressed species on the ‘short’ and ‘middle’ priority lists of the Biodiversity report, particularly those for which the Agency had specific responsibilities.

The assessment of the flow requirements for upstream migration of salmonids in some rivers of North West England

This is the assessment of the flow requirements for upstream migration of salmonids in some rivers of North West England produced by the North West Water Authority in 1985. This report focuses on the automatic fish counters operating on the resistivity principle used for several years in North West England. This report aims to investigate the flow requirements for upstream migration of salmon and migratory trout. The data obtained confirmed that during summer months most fish movement occurs in the higher range of the available flows, but the migration flow range varied from year to year, depending on prevailing river levels. Of the other environmental variables measured, only water temperature and incident light intensity appear to have any direct association with fish movement. Information on migration flow ranges were used in conjunction with computer simulations of the effects of abstraction proposals on historical flows to assess the implications of these proposals for migratory fish.

Chalk rivers: nature conservation and management

This is a handbook about Chalk Rivers Nature Conservation and Management from March 1999 by the Water Research Centre and commissioned by English Nature and the Environment Agency, primarly provides an objective basis for formulating conservation strategies for relevant Site of Special Scientific Interest (SSSIs) and Special Areas of Conservation (SACs). It was also seen as being applicable to chalk rivers more generally and has increasingly been regarded as important to the work of the Biodiversity Action Plan Steering Group on chalk rivers, which is led by the Environment Agency. This report contains information on characteristic wildlife communities, their habitat requirements and the ecological impact of activities that are relevant to the chalk river environment. It provides guidance on setting management objectives, options for mitigating impacts, and measures for the maintaining and enhancing the river channel, riparian and floodplain areas associated. The term `chalk river’ is used to describe watercourses dominated by groundwater discharge from chalk geology, including those that flow over a range of non-chalk surface geologies at various points along their length. England contains numerous examples of this river type, located in and downstream of areas of outcropping chalk in the south, East Anglia and up into Lincolnshire and Yorkshire. Indeed, England has the major part of the chalk river resource of Europe. A number of chalk rivers have been designated as Sites of Special Scientific Interest (SSSIs) and English Nature and Environment Agency work drawing up joint conservation strategies.

Forestry Impacts on Freshwater Habitat of Anadromous Salmonids in the Pacific Northwest and Alaska: requirements for protection and restoration

This synthesis presents a science overview of the major forest management Issues involved in the recovery of anadromous salmonids affected by timber harvest in the Pacific Northwest and Alaska. The issues involve the components of ecosystem-based watershed management and how best to implement them, including how to: Design buffer zones to protect fish habitat while enabling economic timber production; Implement effective Best Management Practices (BMPs) to prevent nonpoint-source pollution; Develop watershed-level procedures across property boundaries to prevent cumulative impacts; Develop restoration procedures to contribute to recovery of ecosystem processes; and Enlist support of private landowners in watershed planning, protection, and restoration. Buffer zones, BMPs, cumulative impact prevention, and restoration are essential elements of what must be a comprehensive approach to habitat protection and restoration applied at the watershed level within a larger context of resource concerns in the river basin, species status under the Endangered Species Act (ESA), and regional environmental and economic issues (Fig. ES. 1). This synthesis 1) reviews salmonid habitat requirements and potential effects of logging; 2) describes the technical foundation of forest practices and restoration; 3) analyzes current federal and non-federal forest practices; and 4) recommends required elements of comprehensive watershed management for recovery of anadromous salmonids.

Management of waterlogged areas, island and coastal saline soils using fish based mixed farming system

Problems in India regarding the management of various coastal saline soil and waterlogged environments are discussed in detail, considering in particular the potential application of mixed fish farming systems. Various operational and cost requirements of such systems are examined.

Industrial practice in technology planning - Implications for a useful tool catalogue for technology management

A survey on technology planning and its implications for a useful tool catalogue for technology management was conducted. The survey provided a picture of technology planning, across a broad range of company size, manufacturing type and sector. It was concluded from the findings that technology planning is an important business activity across industry sectors and company types, driven increasing competition, market requirements and regulation technology change. The process technology roadmapping was used to support technology strategy and planning and could be useful way of structuring both the use of tools in a company and a tool catalogue.

Modelling information requirements in complex engineering services

Services based around complex engineering equipment and systems provide substantial challenges in both the long-term management of the equipment and the need for guaranteed delivery of the related service. One of the challenges for an organisation providing these services is the management of the information that is required to design, deliver and subsequently assess the success of the service. To assist in this process this paper develops a model for capturing, organising and assessing information requirements for these Complex Engineering Services in which information required to support key decisions in the life cycle of the service is identified. The model – referred to as The 12-Box Model for Service Information Requirements – is embedded in a three-phase procedure for providing an assessment of information requirements of a service contract which also provides insight into the capabilities of available information systems in supporting the contract. An illustrative example examining service information in an aircraft availability contract is used to demonstrate the use of the 12-Box Model and associated assessment procedure.

The Impact of Contract Type on Service Provider Information Requirements

This paper is concerned with the role of information in the servitization of manufacturing which has led to “the innovation of an organisation’s capabilities and processes as equipment manufacturers seek to offer services around their products” (Neely 2009, Baines et al 2009). This evolution has resulted in an information requirement (IR) shift as companies move from discrete provision of equipment and spare parts to long-term service contracts guaranteeing prescribed performance levels. Organisations providing such services depend on a very high level of availability and quality of information throughout the service life-cycle (Menor et al 2002). This work focuses on whether, for a proposed contract based around complex equipment, the Information System is capable of providing information at an acceptable quality and requires the IRs to be examined in a formal manner. We apply a service information framework (Cuthbert et al 2008, McFarlane & Cuthbert 2012) to methodically assess IRs for different contract types to understand the information gap between them. Results from case examples indicate that this gap includes information required for the different contract types and a set of contract-specific IRs. Furthermore, the control, ownership and use of information differs across contract types as the boundary of operation and responsibility changes.

Remote Wireless Communications for Construction Management: A Case Study

The recent advances in urban wireless communications and protocols that spurred the development of city-wide wireless infrastructure motivated this research, since in many cases, construction sites are not conveniently located for wired connectivity. Large scale transportation projects for example, such as new highways, railroad tracks and the networks of utilities (power-lines, phone lines, mobile towers, etc) that usually follow them are constructed in areas where wired infrastructure for data exchange is often expensive and time-consuming to deploy. The communication difficulties that can be encountered in such construction sites can be addressed with a wireless communications link between the construction site and the decision-making office. This paper presents a case study on long-range, wireless communications suitable for data exchange between construction sites and engineering headquarters. The purpose of this study was to define the requirements for a reliable wireless communications model where common types of electronic construction data will be exchanged in a fast and efficient manner, and construction site personnel will be able to interact and share knowledge, information and electronic resources with the office staff.

Recycle of transuranium elements in light water reactors for reduction of geological storage requirements

This paper presents results of a feasibility study aimed at developing a zero-transuranic-discharge fuel cycle based on the U-Th-TRU ternary cycle. The design objective is to find a fuel composition (mixture of thorium, enriched uranium, and recycled transuranic components) and fuel management strategy resulting in an equilibrium charge-discharge mass flow. In such a fuel cycle scheme, the quantity and isotopic vector of the transuranium (TRU) component is identical at the charge and discharge time points, thus allowing the whole amount of the TRU at the end of the fuel irradiation period to be separated and reloaded into the following cycle. The TRU reprocessing activity losses are the only waste stream that will require permanent geological storage, virtually eliminating the long-term radiological waste of the commercial nuclear fuel cycle. A detailed three-dimensional full pressurized water reactor (PWR) core model was used to analyze the proposed fuel composition and management strategy. The results demonstrate the neutronic feasibility of the fuel cycle with zero-TRU discharge. The amount of TRU and enriched uranium loaded reach equilibrium after about four TRU recycles. The reactivity coefficients were found to be within a range typical for a reference PWR core. The soluble boron worth is reduced by a factor of ∼2 from a typical PWR value. Nevertheless, the results indicate the feasibility of an 18-month fuel cycle design with an acceptable beginning-of-cycle soluble boron concentration even without application of burnable poisons.

A systematic approach to materials information management for aerospace design

The materials information requirements of the aerospace sector are considered, specifically 'consolidation' (management of raw test data), 'analysis' (investigation of material trade-offs) and 'dissemination (secure distribution of data throughout an organization). An information architecture that satisfies the complex requirements of the aerospace materials industry is discussed and a case-study is presented. © 2003 by Granta Design Limited. Published by the American Institute of Aeronautics and Astronautics, Inc.

Resource Management for Responsive Web Computing

The exploding demand for services like the World Wide Web reflects the potential that is presented by globally distributed information systems. The number of WWW servers world-wide has doubled every 3 to 5 months since 1993, outstripping even the growth of the Internet. At each of these self-managed sites, the Common Gateway Interface (CGI) and Hypertext Transfer Protocol (HTTP) already constitute a rudimentary basis for contributing local resources to remote collaborations. However, the Web has serious deficiencies that make it unsuited for use as a true medium for metacomputing --- the process of bringing hardware, software, and expertise from many geographically dispersed sources to bear on large scale problems. These deficiencies are, paradoxically, the direct result of the very simple design principles that enabled its exponential growth. There are many symptoms of the problems exhibited by the Web: disk and network resources are consumed extravagantly; information search and discovery are difficult; protocols are aimed at data movement rather than task migration, and ignore the potential for distributing computation. However, all of these can be seen as aspects of a single problem: as a distributed system for metacomputing, the Web offers unpredictable performance and unreliable results. The goal of our project is to use the Web as a medium (within either the global Internet or an enterprise intranet) for metacomputing in a reliable way with performance guarantees. We attack this problem one four levels: (1) Resource Management Services: Globally distributed computing allows novel approaches to the old problems of performance guarantees and reliability. Our first set of ideas involve setting up a family of real-time resource management models organized by the Web Computing Framework with a standard Resource Management Interface (RMI), a Resource Registry, a Task Registry, and resource management protocols to allow resource needs and availability information be collected and disseminated so that a family of algorithms with varying computational precision and accuracy of representations can be chosen to meet realtime and reliability constraints. (2) Middleware Services: Complementary to techniques for allocating and scheduling available resources to serve application needs under realtime and reliability constraints, the second set of ideas aim at reduce communication latency, traffic congestion, server work load, etc. We develop customizable middleware services to exploit application characteristics in traffic analysis to drive new server/browser design strategies (e.g., exploit self-similarity of Web traffic), derive document access patterns via multiserver cooperation, and use them in speculative prefetching, document caching, and aggressive replication to reduce server load and bandwidth requirements. (3) Communication Infrastructure: Finally, to achieve any guarantee of quality of service or performance, one must get at the network layer that can provide the basic guarantees of bandwidth, latency, and reliability. Therefore, the third area is a set of new techniques in network service and protocol designs. (4) Object-Oriented Web Computing Framework A useful resource management system must deal with job priority, fault-tolerance, quality of service, complex resources such as ATM channels, probabilistic models, etc., and models must be tailored to represent the best tradeoff for a particular setting. This requires a family of models, organized within an object-oriented framework, because no one-size-fits-all approach is appropriate. This presents a software engineering challenge requiring integration of solutions at all levels: algorithms, models, protocols, and profiling and monitoring tools. The framework captures the abstract class interfaces of the collection of cooperating components, but allows the concretization of each component to be driven by the requirements of a specific approach and environment.

Concurrency Admission Control Management in ACCORD

We propose and evaluate admission control mechanisms for ACCORD, an Admission Control and Capacity Overload management Real-time Database framework-an architecture and a transaction model-for hard deadline RTDB systems. The system architecture consists of admission control and scheduling components which provide early notification of failure to submitted transactions that are deemed not valuable or incapable of completing on time. In particular, our Concurrency Admission Control Manager (CACM) ensures that transactions which are admitted do not overburden the system by requiring a level of concurrency that is not sustainable. The transaction model consists of two components: a primary task and a compensating task. The execution requirements of the primary task are not known a priori, whereas those of the compensating task are known a priori. Upon the submission of a transaction, the Admission Control Mechanisms are employed to decide whether to admit or reject that transaction. Once admitted, a transaction is guaranteed to finish executing before its deadline. A transaction is considered to have finished executing if exactly one of two things occur: Either its primary task is completed (successful commitment), or its compensating task is completed (safe termination). Committed transactions bring a profit to the system, whereas a terminated transaction brings no profit. The goal of the admission control and scheduling protocols (e.g., concurrency control, I/O scheduling, memory management) employed in the system is to maximize system profit. In that respect, we describe a number of concurrency admission control strategies and contrast (through simulations) their relative performance.

Development of miniaturized wireless sensor nodes suitable for building energy management and modelling

Buildings consume 40% of Ireland's total annual energy translating to 3.5 billion (2004). The EPBD directive (effective January 2003) places an onus on all member states to rate the energy performance of all buildings in excess of 50m2. Energy and environmental performance management systems for residential buildings do not exist and consist of an ad-hoc integration of wired building management systems and Monitoring & Targeting systems for non-residential buildings. These systems are unsophisticated and do not easily lend themselves to cost effective retrofit or integration with other enterprise management systems. It is commonly agreed that a 15-40% reduction of building energy consumption is achievable by efficiently operating buildings when compared with typical practice. Existing research has identified that the level of information available to Building Managers with existing Building Management Systems and Environmental Monitoring Systems (BMS/EMS) is insufficient to perform the required performance based building assessment. The cost of installing additional sensors and meters is extremely high, primarily due to the estimated cost of wiring and the needed labour. From this perspective wireless sensor technology provides the capability to provide reliable sensor data at the required temporal and spatial granularity associated with building energy management. In this paper, a wireless sensor network mote hardware design and implementation is presented for a building energy management application. Appropriate sensors were selected and interfaced with the developed system based on user requirements to meet both the building monitoring and metering requirements. Beside the sensing capability, actuation and interfacing to external meters/sensors are provided to perform different management control and data recording tasks associated with minimisation of energy consumption in the built environment and the development of appropriate Building information models(BIM)to enable the design and development of energy efficient spaces.

Self-management education for cystic fibrosis

Background: Self-management education may help patients with cystic fibrosis and their families to choose, monitor and adjust treatment requirements for their illness, and also to manage the effects of illness on their lives. Although self-management education interventions have been developed for cystic fibrosis, no previous systematic review of the evidence of effectiveness of these interventions has been conducted. Objectives: To assess the effects of self-management education interventions on improving health outcomes for patients with cystic fibrosis and their caregivers. Search methods: We searched the Cochrane Cystic Fibrosis and Genetic Disorders Group Trials Register (date of the last search: 22 August 2013). We also searched databases through EBSCO (CINAHL; Psychological and Behavioural Sciences Collection; PsychInfo; SocINDEX) and Elsevier (Embase) and handsearched relevant journals and conference proceedings (date of the last searches: 01 February 2014 ). Selection criteria: Randomised controlled trials, quasi-randomised controlled trials or controlled clinical trials comparing different types of self-management education for cystic fibrosis or comparing self-management education with standard care or no intervention. Data collection and analysis: Two authors assessed trial eligibility and risk of bias. Three authors extracted data. Main results: Four trials (involving a total of 269 participants) were included. The participants were children with cystic fibrosis and their parents or caregivers in three trials and adults with cystic fibrosis in one trial. The trials compared four different self-management education interventions versus standard treatment: (1) a training programme for managing cystic fibrosis in general; (2) education specific to aerosol and airway clearance treatments; (3) disease-specific nutrition education; and (4) general and disease-specific nutrition education. Training children to manage cystic fibrosis in general had no statistically significant effects on weight after six to eight weeks, mean difference -7.74 lb (i.e. 3.51 kg) (95% confidence interval -35.18 to 19.70). General and disease-specific nutrition education for adults had no statistically significant effects on: pulmonary function (forced expiratory volume at one second), mean difference -5.00 % (95% confidence interval -18.10 to 8.10) at six months and mean difference -5.50 % (95% confidence interval -18.46 to 7.46) at 12 months; or weight, mean difference - 0.70 kg (95% confidence interval -6.58 to 5.18) at six months and mean difference -0.70 kg (95% confidence interval -6.62 to 5.22) at 12 months; or dietary fat intake scores, mean difference 1.60 (85% confidence interval -2.90 to 6.10) at six months and mean difference 0.20 (95% confidence interval -4.08 to 4.48) at 12 months. There is some limited evidence to suggest that self-management education may improve knowledge in patients with cystic fibrosis but not in parents or caregivers. There is also some limited evidence to suggest that self-management education may result in positively changing a small number of behaviours in both patients and caregivers. Authors' conclusions: The available evidence from this review is of insufficient quantity and quality to draw any firm conclusions about the effects of self-management education for cystic fibrosis. Further trials are needed to investigate the effects of self-management education on a range of clinical and behavioural outcomes in children, adolescents and adults with cystic fibrosis and their caregivers.