679 resultados para plasterboard lining


Relevância:

10.00% 10.00%

Publicador:

Resumo:

Bergkvist insjön AB is a sawmill yard which is capable of producing 350,000 cubic meter of timber every year this requires lot of internal resources. Sawmill operations can be classified as unloading, sorting, storage and production of timber. In the company we have trucks arriving at random they have to be unloaded and sent back at the earliest to avoid queuing up of trucks creating a problem for truck owners. The sawmill yard has to operate with two log stackers that does several tasks including transporting the logs from trucks to measurement station where the logs will be sorted into classes and dropped into pockets from pockets to the sorted timber yard where they are stored and finally from there to sawmill for final processing. The main issue that needs to be answered here is the lining up trucks that are waiting to be unload, creating a problem for both sawmill as well as the truck owners and given huge production volume, it is certain that handling of resources is top priority. A key challenge in handling of resources would be unloading of trucks and finding a way to optimize internal resources.To address this problem i have experimented on different ways of using internal resources, i have designed different cases, in case 1 we have both the log stackers working on sawmill and measurement station. The main objective of having this case is to make sawmill and measurement station to work all the time. Then in case 2, i have divided the work between both the log stackers, one log stacker will be working on sawmill and pocket_control and second log stacker will be working on measurement station and truck. Then in case 3 we have only one log stacker working on all the agents, this case was designed to reduce cost of production, as the experiment cannot be done in real-time due to operational cost, for this purpose simulation is used, preliminary investigation into simulation results suggested that case 2 is the best option has it reduced waiting time of trucks considerably when compared with other cases and it showed 50% increase in optimizing internal resources.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The use of ceramic material as refractories in the manufacturing industry is a common practice worldwide. During usage, for example in the production of steel, these materials do experience severe working conditions including high temperatures, low pressures and corrosive environments. This results in lowered service lives and high consumptions of these materials. This, in turn, affects the productivity of the whole steel plant and thereby the cost. In order to investigate how the service life can be improved, studies have been carried out for refractories used in the inner lining of the steel ladles. More specifically, from the slag zone, where the corrosion is most severe. By combining thermodynamic simulations, plant trails and post-mortem studies of the refractories after service, vital information about the behaviour of the slagline refractories during steel refining and the causes of the accelerated wear in this ladle area has been achieved. The results from these studies show that the wear of the slagline refractories of the ladle is initiated at the preheating station, through reduction-oxidation reactions. The degree of the decarburization process is mostly dependent on the preheating fuel or the environment. For refractories without antioxidants, refractory decarburization is slower when coal gas is used in ladle preheating than when a mixture of oil and air is used. In addition, ladle preheating of the refractories without antioxidants leads to direct wear of the slagline refractories. This is due to the total loss of the matrix strength, which results in a sand-like product. Thermal chemical changes that take place in the slagline refractories are due to the MgO-C reaction as well as the formation of liquid phases from impurity oxides. In addition, the decrease in the system pressure during steel refining makes the MgO-C reaction take place at the steel refining temperatures. This reduces the refractory’s resistance to corrosion. This is a serious problem for both the magnesia-carbon and dolomite-carbon refractories. The studies of the reactions between the slagline refractories and the different slag compositions showed that slags rich in iron oxide lead mostly to the oxidation of carbon/graphite in the carbon-containing refractories. This leads to an increased porosity and wettability and therefore an enhanced penetration of slag into the refractory structure. If the slag contains high contents of alumina and or silica (such as the steel refining slag), reactions between the slag components and the dolomite-carbon refractory are promoted. This leads to the formation of low-temperature melting phases such as calcium-aluminates and silicates. The state of these reaction products during steel refining leads to an accelerated wear of the dolomite-carbon refractory. The main products of the reactions between the magnesia-carbon refractory and the steel refining slag are MgAl2O4 spinels, and calcium-aluminates, and silicates. Due to the good refractory properties of MgAl2O4 spinels, the slag corrosion resistance of the magnesiacarbon refractory is promoted.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This black and white photograph shows a large group of men lining up for dessert at a New York Trade School social event.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Most of water distribution systems (WDS) need rehabilitation due to aging infrastructure leading to decreasing capacity, increasing leakage and consequently low performance of the WDS. However an appropriate strategy including location and time of pipeline rehabilitation in a WDS with respect to a limited budget is the main challenge which has been addressed frequently by researchers and practitioners. On the other hand, selection of appropriate rehabilitation technique and material types is another main issue which has yet to address properly. The latter can affect the environmental impacts of a rehabilitation strategy meeting the challenges of global warming mitigation and consequent climate change. This paper presents a multi-objective optimization model for rehabilitation strategy in WDS addressing the abovementioned criteria mainly focused on greenhouse gas (GHG) emissions either directly from fossil fuel and electricity or indirectly from embodied energy of materials. Thus, the objective functions are to minimise: (1) the total cost of rehabilitation including capital and operational costs; (2) the leakage amount; (3) GHG emissions. The Pareto optimal front containing optimal solutions is determined using Non-dominated Sorting Genetic Algorithm NSGA-II. Decision variables in this optimisation problem are classified into a number of groups as: (1) percentage proportion of each rehabilitation technique each year; (2) material types of new pipeline for rehabilitation each year. Rehabilitation techniques used here includes replacement, rehabilitation and lining, cleaning, pipe duplication. The developed model is demonstrated through its application to a Mahalat WDS located in central part of Iran. The rehabilitation strategy is analysed for a 40 year planning horizon. A number of conventional techniques for selecting pipes for rehabilitation are analysed in this study. The results show that the optimal rehabilitation strategy considering GHG emissions is able to successfully save the total expenses, efficiently decrease the leakage amount from the WDS whilst meeting environmental criteria.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

How isolated is Venezuela’s government from the people it supposedly represents? Very isolated indeed, according to a study commissioned by beyondbrics from Marco Ruediger and colleages at FGV DAPP, the department of public policy analysis at the Fundação Getulio Vergas in Rio de Janeiro. The study, derived from activity on Twitter, demonstrates the extreme polarisation of opinion in the country and suggests that Venezuela’s media, often either controlled or suppressed by the government, is increasingly lining up with opposition voices.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The study proposed to describe sexual development in pelagic stage loggerhead sea turtles Caretta caretta and compare this to hatchlings and adults. It is meant as an ontogenic approach, in order to understand reproductive development and population composition and their dynamics in the pelagic environment. The study focused on the pelagic loggerheads that are found in the waters offshore Madeira Island (Portugal) in the North-eastern Atlantic and use it as a developmental habitat. The innovating character of this work relied on the lack of any description regarding the gonad ontogenesis and reproductive development for the pelagic stage in any of the 7 existing sea turtle species, all of them in danger of extinction. Three methods were used to diagnose the sex of each juvenile individual and asses the level of reproductive development: (1) laparoscopy, (2) gonad biopsy and (3) the assessment of two sex steroids circulating levels, namely testosterone and estradiol. In order to cover all life stages and compare data obtained for the juvenile stage, hatchlings and nesting female adults were sampled at the nearest nesting rookery at Boa Vista Island in the Cape Verde Archipelago. Gonads from dead hatchlings were collected for gonad histology and blood was collected from nesting females for sex steroids assessment. Laparoscopies revealed to be a valid sexing method for the juvenile stage, since gonads are morphologically differentiated at these size classes. Moreover, laparoscopy was validated using gonad histology. Gonad histology of juveniles showed that gonads are already completely differentiated into ovaries or testes at the size classes examined, but development seems to be quiescent. Males present already developed seminiferous tubules with spermatogonia lining the interior of the seminiferous tubule. Female gonads present oocytes at different development stages, but only oocytes up to stage III were observed. The maximum oocyte diameter in each individual correlated with body size, suggesting that reproductive development is an on-going process in juvenile females. The circulating levels of both testosterone and estradiol in juveniles of both sexes were very low and consistently lower than the ones observed in the nesting females from Boa Vista Island. No bimodal distribution was found for any of the sex steroids analysed and thus circulating hormone levels were not a reliable tool for sexing juvenile individuals with a non-invasive technique. The ratio testosterone:estradiol did not show a bimodal distribution either. The levels of testosterone correlated with sea surface temperature. The fact that temperatures observed during this study were below 24ºC might have hindered a differential testosterone pattern between juvenile males and females. Sex ratios for this population were generated according to laparoscopy results and compared among years and size classes. An overall sex ratio of 2 females for each male was found, but they varied among size classes but not among years. Possible causes for the sex ratios observed are discussed. This study is a contribution to our knowledge on the pelagic stage of loggerhead turtles, namely on the population structure regarding sex ratio, which is a vital tool for implementing conservation strategies.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The use of gypsum, one of the oldest building materials for the construction industry in the country has been experiencing a significant and steady growth, due to its low cost and some of its properties that confer comparative advantage over other binder materials. Its use comprises various applications including the coating of walls and the production of internal seals and linings. Moreover, the fibers are being increasingly incorporated into arrays fragile in an attempt to improve the properties of the composite by reducing the number of cracks, the opening of the same and its propagation velocity. Other properties, depending on the function of the component material or construction, among these thermal and acoustic performances, are of great importance in the context of buildings and could be improved, that is, having better performance with this embodiment. Conduct a comparative study of physico-mechanical, thermal and acoustic composite gypsum incorporating dry coconut fiber, in the form of blanket, constituted the main objective of this work. Improving the thermal and acoustic performances of precast gypsum, used for lining and internal vertical fences of buildings, was the purpose of development of these composites. To evaluate the effect of fiber content on the properties of the composites were used to manufacture the composite layer with different thicknesses. The composites were fabricated in the form of plates with dimensions of 500x500x24mm. To facilitate the comparative study of the properties were also made with material gypsum boards only. We then determined the physico-mechanical, thermal and acoustical plaster and composites. The results indicated that the composites were significant gains in relation to thermal performance and also acoustic, in certain frequency range, increasing the thickness of the blanket. Concerning other physical-mechanical properties, the results showed that although the compressive strength was lower than for the composite did not occur after a fracture catastrophic failure. The same trend was observed with regard to resistance to bending, since the composites have not suffered sudden rupture and still continued after the load supporting point of maximum load

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

O objetivo deste trabalho foi avaliar o efeito do uso de isolante térmico de telhado instalado como forro sob a cobertura no desempenho de frangos alojados em diferentes densidades (10, 16 e 22 aves/m²) e nas características da cama de aviário em galpão convencional. O experimento foi realizado durante o verão, utilizando 3328 aves da linhagem Hubbard, distribuídas em um delineamento inteiramente casualizado, em um esquema fatorial 3x2 (densidade e sexo), com quatro repetições dentro de cada ambiente. Para a comparação dos ambientes, utilizou-se a análise conjunta. Durante o período experimental, registraram-se dados de temperatura ambiente em vários pontos do galpão e em diversos horários, umidade relativa e carga térmica radiante. O teor de nitrogênio e matéria seca e a temperatura da cama foram determinados. No ambiente com isolante térmico, as temperaturas ambientais médias e a amplitude térmica diária foram menores e a umidade relativa do ar, maior. O desempenho das aves foi melhor no ambiente com isolante térmico, no qual as aves tiveram maior consumo de ração, maior ganho de peso, melhor conversão alimentar, menor mortalidade e maior produção por área. A temperatura retal das aves do ambiente sem isolante térmico foi mais elevada. À medida que se elevou a densidade, a mortalidade aumentou, porém a produção por área foi maior. O uso do isolante não influenciou a produção de cama, mas diminuiu a porcentagem de nitrogênio na cama. Com o aumento da densidade, a produção de cama elevou-se, pelo maior volume de excretas, mas não influenciou sua porcentagem de nitrogênio. O uso do isolante térmico permitiu aumento da densidade de criação dos frangos.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Uma ampla variedade de patógenos oportunistas tem sido detectadas nos tubos de alimentação de água dos equipos odontológicos, particularmente no biofilme formado na superfície do tubo. Entre os patógenos oportunistas encontrados nos tubos de água, Pseudomonas aeruginosa é reconhecida como uma das principais causadoras de infecções nosocomiais. Foram coletadas 160 amostras de água e 200 amostras de fomites em quarenta clinicas odontológicas na cidade de Barretos, São Paulo, Brasil, durante o período de Janeiro a Julho de 2005. Setenta e seis cepas de P. aeruginosa, isoladas a partir dos fomites (5 cepas) e das amostras de água (71 cepas), foram analisadas quanto à susceptibilidade à seis drogas antimicrobianas freqüentemente utilizadas para o tratamento de infecções provocadas por P. aeruginosa. As principais suscetibilidades observadas foram para a ciprofloxacina, seguida pelo meropenem. A necessidade de um mecanismo efetivo para reduzir a contaminação bacteriana dentro dos tubos de alimentação de água dos equipos odontológicos foi enfatizada, e o risco da exposição ocupacional e infecção cruzada na prática odontológica, em especial quando causada por patógenos oportunistas como a P. aeruginosa foi realçado.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The ultrastructure of the epididymal duct of the dog is described in this paper. The epididymis was divided into three morphofunctional segments: initial, middle and terminal. The cellular population of the lining epithelium is formed from principal, apical, basal and clear cells. The peritubular stroma and the tubular interstitium surrounding the epithelium are also described. The outcome is compared to the description made in other species of mammals.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Periapical lesions are chronic inflammatory conditions of periradicular tissues considered direct consequences of infectious diseases resulting from pulp necrosis and subsequent progression to periapical region. The participation of the immune response and bone resorption in the formation of these lesions has been investigated, so that different cell types and cytokines have been identified as contributors to this process. In this perspective, this study aimed to evaluate the immunohistochemical expression of IL-17, TGF-β1 and FoxP3 in periapical granulomas (PGs), radicular cysts (RCs) and residual radicular cysts (RRCs), seeking a better understanding of the etiopathogenesis these periapicopatias. To this end, we selected 20 cases of GPs, 20 CRs and 10 RRCs to undergo morphological analysis and immunohistochemistry for biomarkers above, the latter being performed quantitatively using scores and average percentages of immunostaining for the analysis of IL-17 and TGF- β1, while for the FoxP3 were counted only the positive lymphocytes. The results showed statistically significant differences between TGF-β1 and FoxP3 imunoexpressions, in relation to the periapical lesions studied (p = 0.002, p <0.001, respectively) but not between IL-17 and these (p = 0.355). Furthermore, the analysis of lymphocytes FoxP3-positive revealed significant statistical differences in that refers to the intensity of inflammatory infiltrate (p = 0.003) and also regarding thickness of the epithelial lining (p = 0.009). Finally, it was observed in the case of PGs, strong positive correlation between the amount of FoxP3- positive lymphocytes and the immunohistochemical expression of TGF-β1 (r = 0.755, p<0.001), as well as moderate positive correlation between IL-17 and TGF-β1 imunoexpressions (r = 0.503, p = 0.024). Thus, we can conclude that interactions between Th17 and Treg cells seem to be established at the site of injury, suggesting the involvement of both pro-inflammatory and immunoregulatory cytokines in the pathogenesis of periapical lesions