Method for marginal measurements of restorations: accessory device for toolmakers microscope.

Standardization of measurements for marginal fit of castings is critical. This study describes the fabrication of a device that allowed fixation of specimens on a Toolmakers microscope with identical conditions according to tri-dimensional positioning of specimens, measuring location, and seating force. The device also allows mapping of the marginal discrepancies on the entire marginal perimeter of the tooth preparation.

Efeitos da Seleção para Peso Pós-desmame sobre Medidas Corporais e Perímetro Escrotal de Machos Nelore de Sertãozinho (SP)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Marginal fit of nickel-chromium copings before and after internal adjustments with duplicated stone dies and disclosing agent.

STATEMENT OF PROBLEM: Despite careful procedures, master stone dies may be damaged during laboratory procedures. The dentist routinely adjusts castings because the marginal fit of casting is not as accurate as on the dies. PURPOSE: This study evaluated the technique of internal adjustment of castings with use of duplicated stone dies and a disclosing agent to improve marginal fit discrepancy. MATERIAL AND METHODS: Thirty-two nickel-chromium copings were fabricated and simulated standard clinical and laboratory procedures with 2 variables: tooth preparation convergence angles of 6 and 18 degrees, with or without internal relief. Master stone dies and their duplicates were selected for coping construction and internal adjustment, respectively. A specimen positioning device was coupled with a Toolmakers microscope to allow reproducibility of measurements. Each coping was evaluated at 8 locations of its marginal perimeter, before and after internal adjustment. RESULTS: Marginal fit discrepancy of copings were significantly reduced with an internal adjustment technique (mean > 52%) for all experimental groups. Tooth preparations with greater convergence and internally relieved castings recorded a better marginal fit. CONCLUSION: The casting internal adjustment technique with use of duplicated stone dies and a disclosing agent substantially reduced marginal fit discrepancy.

A method for the digital image analysis of ceramic grains based on shape factor segmentation

A very simple and robust method for ceramics grains quantitative image analysis is presented. Based on the use of optimal imaging conditions for reflective light microscopy of bulk samples, a digital image processing routine was developed for shading correction, noise suppressing and contours enhancement. Image analysis was done for grains selected according to their concavities, evaluated by perimeter ratio shape factor, to avoid consider the effects of breakouts and ghost boundaries due to ceramographic preparation limitations. As an example, the method was applied for two ceramics, to compare grain size and morphology distributions. In this case, most of artefacts introduced by ceramographic preparation could be discarded due to the use of perimeter ratio exclusion range.

Nuclear phenotypes and morphometry of human secretory prostate cells: A comparative study of benign and malignant lesions in Brazilian patients

Prostatic lesions in Brazilian patients with benign prostatic hyperplasia (BPH, 26 cases) or adenocarcinoma (AC, 25 cases) were compared by qualitative microscopy and morphometric analysis. In 12 cases of BPH, prostate regions with no histological alterations were considered as controls (Ct). Archival material consisted of formalin-fixed, paraffin-embedded specimens obtained from prostatic transurethral resection and radical prostatectomy. Haematoxylin/eosin (HE)-stained sections were used to estimate the nuclear areas, perimeters and form factor values. HE-stained sections from AC specimens were also used for Gleason grading. BPH, AC and Ct could be discriminated by their nuclear areas and nuclear perimeters, but not by the nuclear form factor parameter. No significant differences were found when the AC data were compared using the combined version or the predominant grade version of the Gleason score (p = 0.8380 for nuclear area; p = 0.6076 for nuclear perimeter; p = 0.9202 for nuclear form factor; n = 200 nuclei per patient). This finding indicates that there is extensive heterogeneity in the size and shape of the nucleus in AC cells. These results also show that although the nuclear morphometry served to discriminate BPH and AC from each other and from Ct, it was not sufficient to correlate AC lesions with their respective Gleason scores in the human population analyzed.

Morphometric study by image analysis of Ag-stained nucleoli in thyroids bearing proliferating lesions

The Ag-NOR staining technique and image analysis were used to evaluate morphological parameters (area, perimeter and axis ratio) in nucleoli from normal thyroids and from thyroids bearing proliferating lesions (carcinomas, adenomas and hyperplasias). Regions with normal appearance located close to adenomatous and carcinomatous regions, in the thyroid of every patient, were also analyzed for comparison with the respective pathological regions and with normal thyroids. Statistical analysis of data for the nucleolar area and perimeter allowed the separation of adenomas and carcinomas from hyperplasias and normal tissue but not the two components in each of these two groups. However, if we look at the numbers, a sequence of increasing nucleolar mean areas in the order: normal, hyperplasia, adenoma and carcinoma may be observed, indicating the sequence of increasing rRNA requirements in these different kinds of cells. The axis ratio that denotes the nucleolar shape (round or oblong) did not show significant differences among tissues, suggesting that shape is not important in the characterization of these pathologies. Differences in nucleolar areas and perimeter between normal and affected regions from each patient were statistically significant for adenomas and carcinomas. When these normal regions were compared with the normal thyroids, significant differences were not obtained in the three evaluated parameters. The observations and their importance for histopathological diagnosis are discussed.

A new way of analyzing occlusion 3 dimensionally

This article introduces a new method for 3-dimensional dental cast analysis, by using a mechanical 3-dimensional digitizer, MicroScribe 3DX (Immersion, San Jose, Calif), and TIGARO software (not yet released, but available from the author at hayasaki@dent.kyushu-u.ac.jp). By digitizing points on the model, multiple measurements can be made, including tooth dimensions; arch length, width, and perimeter; curve of Spee; overjet and overbite; and anteroposterior discrepancy. The bias of the system can be evaluated by comparing the distance between 2 points as determined by the new system and as measured with digital calipers. Fifteen pairs of models were measured digitally and manually, and the bias was evaluated by comparing the variances of both methods and checking for the type of error obtained by each method. No systematic errors were found. The results showed that the method is accurate, and it can be applied to both clinical practice and research. Copyright © 2005 by the American Association of Orthodontists.

Levedura íntegra e derivados do seu processamento em rações para tilápia do Nilo: Aspectos hematológicos e histológicos

The effects of inclusion of whole yeast, autolyzed yeast and yeast cell wall on hematological parameters and gut villus perimeter were evaluated in juvenile Nile tilapia, after 80 experimental days. Isoproteic (32.0% DP) and isoenergetic (3200 kcal DE kg -1) practical diets were supplemented with three levels of whole yeast or autolyzed yeast (1.0, 2.0 and 3.0%) and three levels of yeast cell wall (0.1, 0.2 and 0.3%), plus a control diet (with no test microingredients). Red blood cell count, hemoglobin concentration, total plasmatic protein, hematocrit percentage, mean corpuscular volume, mean corpuscular hemoglobin concentration and gut villus perimeter were evaluated. Variations on hematological parameters in animals fed diets with whole yeast; autolyzed yeast and yeast cell wall were observed to be within normal ranges for this species. There was significant influence (p<0.05) of different levels of yeast and derivatives on intestinal villus perimeter. Results showed that experimental period and proposed levels of whole yeast, autolyzed yeast and yeast cell wall do not provide undesirable alterations on standard hematological parameters to Nile tilapia and can be safely used to compound diets for this species. Results also showed that supplement of yeast cell wall provide higher intestinal villus perimeter.

Pelvimetria em macacos-da-noite (Aotus azarai infulatus - KUHL, 1820)

Related data to the diameters of the pelvis from 72 Aotus azarai infulatus, owl monkeys, 42 adult males and 30 adult non-pregnant females, were obtained in vivo by ventrodorsal projection radiographic exams, correlated with sex, the measures of the body and their origin. The mean values of the body length (30.94 cm), tail length (35.63 cm), thoracic perimeter (18.97 cm), hip perimeter (17.11 cm) and the weight (0.96 Kg) were verified. The radiographic images were digitalized and measured, and the mean values were 1.41 cm for the superior biiliac diameter; 1.58 cm for the inferior biiliac diameter; 1.97 cm for the medium biiliac diameter; 2.64 cm for the right diagonal diameter; 2.66 cm for the left diagonal diameter; 2.48 cm for the sacrum-pubic diameter; 3.85 cm 2 for the inlet pelvic area. In conclusion, the pelvis from males and females Aotus azarai infulatus can be classified as dolicopelvic and there is pelvic sexual dimorphism in adult owl monkeys (Aotus azarai infulatus).

Correção da sodicidade de dois solos irrigados em resposta à aplicação de gesso agrícola

The chemical and physical degradation of the soils by salinity and sodicity problems constitutes a serious obstacle in productive irrigated areas in arid and semi-add regions. In order to eval mate the effect of gypsum on electrical conductivity, pH, exchangeable sodium percentage, sodium, calcium and magnesium content in saturation extract and exchangeable sodium of two saline-sodic soils: one from irrigated Perimeter Engenheiro Arco Verde in the municipality of Condado and another from irrigated Perimeter of São Gonçalo, in the municipality of Sousa both in the Paraiba State Brazil, an experiment was carried out in green house of the Departamento de Solos e Engenharia Rural, Centro de Ciências Agrárias, Universidade Federal da Paraíba, Areia, Brazil, in a factorial design 2 × 5 referring the two soils and five gypsum levels equivalent to 0; 3.2; 6.3; 9.4 and 12.5 g kg-1 to each soil. The gypsum application exercised positive effects on reduction of salinity and sodicity. The values of electrical conductivity, exchangeable sodium percentage, pH and contents of soluble and exchangeable sodium in relation to data of the soils before application of treatments with gypsum in both the soils were found to decrease.

Efecto de la fertirrigación con n y k en el crecimiento de la palma de coco enano Verde de jiqui

The coconut palm crop has increased with the use of the fertigation technique in Brazil in the last years. The objective of this work was to evaluate the influence of N and K rates via fertigation, on vegetative growth of three year old palms, cultivated in the littoral region of the Ceará State, Brazil, with tropical rainy climate. The study was conducted in a sandy soil using the variety of green dwarfed Jiqui coconut palm. The experimental design was a randomized complete block, with 10 treatments, including five nitrogen and five of potassium rates, according to the model of the experimental matrix Plan Puebla III. The nitrogen and potassiun applications via fertigation influenced significantly the plant height, stem perimeter, and the number of leaves and folioles. © 2009 Universidad Centroccidental Lisandro Alvarado (UCLA).

Linhagem materna: Qual a sua influência em características pré e pós desmama em bovinos da raça Nelore?

The present work had as objective to evaluate the effects of the introduction of the maternal lineage (Lc), representing the mitochondrial inheritance, in the model of genetic evaluation on birth weight (BW), weight for 120 days (W120), weaning weight (WW), weight at 12 month (W12), weight at 18 month (W18), weight gain from weaning to 18 month (WG18), scrotal perimeter (SP) and temperament (TEMP) of a Brazilian Nelore herd. Two models had been used for raise a comparison among of estimates the (co)variances components and genetic parameter, been the first equal one to currently used in the genetic evaluations of this herd, and second included the random effect of maternal lineage. Amongst the analyzed characteristics, the maternal lineage effect was significant (P<0.05) for W18 and SP only it, where this effect was responsible for 3% and 7%, respectively, of phenotypic variance could be explained by Lc effect. For besides characteristics, however not significant, this effect was responsible for 1% and 9% of phenotypic variance.

Caracterización y clasificación de la red hidrográfica de la cuenca del río Bobo, departamento de Nariño - Colombia

The object of this work was to make a morphometric characterization of the Bobo river watershed in the Nariño department in Colombia. A map was created from topographical maps (1:25.000 scale) using the drainage network and the limit of each 2nd order microbasin as database. Dimensional, drainage network and relief morphometric parameters were evaluated for a later hy-drological study. The drainage area was 224.97 km2, having a 71.31 km perimeter. The Bobo river watershed is considered to be 6th order and has 176 2nd order drainage channels, 34 3rd order drainage channels, 9 4th order drainage channels and 3 5th order drainage channels. Average drainage density is 3.71km/km2, reflecting its high density, having strong, dissected geological formation. The area has a typical Andean land-use pattern, having native wooded vegetation, traditional transitory potato and vegetable growing predominating.

Cytoplasmic and nuclear morphometric parameters in cytologic preparations of canine cutaneous mast cell tumors

Thirty fine-needle biopsy (FNB) samples from 28 dogs subjected to surgical resection of cutaneous mast cell tumors (MCTs) were stained with Giemsa. At least 100 neoplastic cells from each cytology slide were evaluated by morphometric analysis. The parameters were: area, perimeter of the cell, cytoplasm, nucleus and circumference factor. MCTs of grade III had a mean cellular area of 231.70 μm2 ± 57.1, and grade II had a mean of 252.30 μm2 ± 55.0. Cellular perimeter was 61.20 ± 7.1 in grade II and 59.1 ± 8.6 in grade III. Cellular parameters were not statistically different between grades (p>.05). Mean nuclear area was 88.90 μm2 ± 19 in grade III and 72.30 μm2 ± 13.9 in grade II, with statistical difference between grades (P =.011). Mean nuclear perimeter was 32.40 ìm ± 3.0 in grade II and 35.70 ìm ± 4.0 in grade III, with statistical difference between grades (P =.018). Mean nuclear circumference factor was 1.0 ± 0.33 in grade II and 1.1 ± 0.28 in grade III, with no statistical difference between grades (P = 0.78). Nuclear-tocytoplasmic ratio in grade II was 0.29 ±.07 and 0.39 ±.08 in grade III, with statistical difference (P =.02). The number of binucleated and multinucleated cells and mitotic figures was significantly increased in grade III MCTs (P <.001). In conclusion, the number of mitotic figures, presence of binucleation and multinucleation, and nuclear-to-cytoplasmic ratio can help to guide a profile of MCT aggressiveness in cytologic preparations.

Análise dos parâmetros morfométricos da bacia do Rio Preto, Serra do Espinhaço (Minas Gerais, Brasil)

The Rio Preto Hydrographic Basin (RPHB) is located in the North-central portion of the state of Minas Gerais, Brazil, 30 km ENE of the city of Diamantina. The sources of the stream of that name are found in the Rio Preto State Park, which has an area of 10,755 hectares. The total area, perimeter, extension, and axial length of the RPHB, as well as other morphometric characteristics, with emphasis on shape indexes, were obtained with the help of the ArcGis 9.2 program. The cartographic data were taken from digitalized topographic charts in a scale of 1:100,000 of the Brazilian Geographical Institute (IBGE). The measured drainage area is of 389.3 km2 and the perimeter is 136.9 km. Due to structural influence, the shape of the RPHB is irrgular and elongated, with drainage developed in a dendritic and parallel pattern. Those characteristics were checked by means of the compaxity coefficient and the shape factor. The first one was estimated in 1.94, what implies that the basin is not subject to fast flooding in years with normal precipitation. The high degree of fluvial downcutting of the basin is confirmed by the fact that it is a 5th order basin, it presents a significant branching rate and a medium drainage density.