Heritability estimation in early generations of two-way crosses in soybean

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Depression by inbreeding after four sucessive self-pollination squash generations

The strategy for breeding F-1 hybrid squash is to develop parental lines through self-pollination. However, it increases plant mean homozygosis, which is not the natural genetic state of a cross-pollinated species, and can cause inbreeding depression. The objective of this work was to evaluate this depression with sucessive generations of self-pollination (without selection) in Cucurbita moschata, cv. Piramoita. Populations were obtained from lines with one to four generations of self-pollination (obtained by the SSD method), from the original cv. Piramoita (population SO). Randomized blocks were used with five treatments (different generations of self-pollination -S-0 to S-4), six replicates and five plants per plot. Regression analysis was made by the Wright inbreeding coefficient (F) to measure the homozygosis level effect on vigor loss. There was a linear reduction of mean weight and fruit length, seed production (number and weight) per fruit with the increase of the homozygosis level; however inbreeding did not affect seed quality (weight of 100 seeds and germination).

Degree of conversion of nanofilled and microhybrid composite resins photo-activated by different generations of LEDs

Objective: This study aimed at evaluating the degree of conversion (DC) of four composite resins, being one nanofilled and 3 microhybrid resins, photo-activated with second- and third-generation light-emitting diodes (LEDs). Material and methods: Filtek (TM) Z350 nanofilled composite resins and Amelogen (R) Plus, Vit-l-escence (TM) and Opallis microhybrid resins were photo-activated with two second-generation LEDs (Radii-cal and Elipar Free Light (TM) 2) and one third-generation LED (Ultra-Lume LED 5) by continuous light mode, and a quartz halogen-tungsten bulb (QHT, control). After 24 h of storage, the samples were pulverized into fine powder and 5 mg of each material were mixed with 100 mg of potassium bromide (KBr). After homogenization, they were pressed, which resulted in a pellet that was evaluated using an infrared spectromer (Nexus 470, Thermo Nicolet) equipped with TGS detector using diffuse reflectance (32 scans, resolution of 4 cm(-1)) coupled to a computer. The percentage of unreacted carbon-carbon double bonds (% C=C) was determined from the ratio of absorbance intensities of aliphatic C=C (peak at 1637 cm-1) against internal standard before and after curing of the specimen: aromatic C-C (peak at 1610 cm-1). Results: The ANOVA showed a significant effect on the interaction between the light-curing units (LCUs) and the composite resins (p<0.001). The Tukey's test showed that the nanofilled resin (Filtek (TM) Z350) and Opallis when photo-activated by the halogen lamp (QTH) had the lowest DC compared with the other microhybrid composite resins. The DC of the nanofilled resin (Filtek (TM) Z350) was also lower using LEDs. The highest degrees of conversion were obtained using the third-generation LED and one of second-generation LEDs (Elipar Free Light (TM) 2). Conclusions: The nanofilled resin showed the lowest DC, and the Vit-l-escence (TM) microhybrid composite resin showed the highest DC. Among the LCUs, it was not possible to establish an order, even though the second-generation LED Radii-cal provided the lowest DC.

Aggressiveness Overcomes Body-Size Effects in Fights Staged between Invasive and Native Fish Species with Overlapping Niches

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Hymenoptera marking technique

In true social hymenopterans, such as many species of bees, wasps and all species of ants, the main characteristics are the overlapping of generations, the care with the offspring and the division of labor among the members of the colony. The first biological feature means that in a same moment there are groups of individuals, with variable ages, that execute different activities in the colony. In order to study the division of labor among the members of the colony, or to estimate the life span of these insects, or even to analyze any kind of behavior in non-social insects, it is necessary to know the exact age of each individual. For this reason, the insects must be identified soon after emergence. The identification of insects with numbers is an important technological improvement in behavioral studies, mainly in honeybee colonies. The aim of this scientific note is to describe an easy and cheaper technique for marking hymenopterans.

The development of resistance to caffeine in Drosophila prosaltans: productivity and longevity after ten generations of treatment

The productivity of Drosophila prosaltans treated with six concentrations of caffeine (from 50 mu g/ml to 2,500 mu g/ml of culture medium) during ten generations (similar to 8 months) decreased in a dosage dependent manner in every generation, but at the end of the treatment the flies in all experiments recovered normal productivity, except for those treated with 2,500 mu g/ml. Longevity in the tenth generation was significantly reduced in males and females only in the 2,500 mu g/ml dosage, with males being much more affected than females. In a previous study in which the treatment was done in a single generation, productivity exhibited only a partial recovery when the treatment ceased and longevity was significantly reduced in 1,500 mu g/ml dosages. The hypothesis of selection occurring in ten generations leading to recovery in productivity and to a reduction in the processes which cause a decrease in longevity is being considered.

Caffeine effect on mortality and oviposition in successive generations of Aedes aegypti

OBJETIVO: Experimentos anteriores mostraram que a cafeína bloqueia o desenvolvimento de Aedes aegypti (Diptera, Culicidae) na fase larval, inibindo conseqüentemente a produção de adultos. O objetivo do estudo foi obter dados que pudessem sugerir desenvolvimento de resistência dos mosquitos à cafeína. MÉTODOS: Foi avaliada a produção de adultos em gerações sucessivas, a partir de ovos produzidos na geração anterior e a taxa de oviposição em cada geração, utilizando meios contendo cafeína a 200 e 500 µg/ml e água de torneira proveniente de poço artesiano como controle. Os experimentos foram conduzidos em São José do Rio Preto, entre 2002 e 2005. Nos testes estatísticos foram utilizados a análise exploratória de dados e algoritmos de alisamento. RESULTADOS: Ocorreu redução crescente da produção de adultos, nas duas concentrações, ao longo das gerações, mas apenas no experimento a 200 µg/ml os dados foram estatisticamente significantes. Quanto à oviposição, a análise dos números mostra redução crescente e acentuada na média de ovos por fêmea, no experimento tratado. CONCLUSÕES: Não houve evidência de resistência ao longo das gerações devido ao tratamento com cafeína. Os resultados encontrados podem reforçar a indicação da cafeína como uma alternativa aos principais agentes de controle do Ae. aegypti atualmente usados, contra os quais os mosquitos têm desenvolvido resistência.

Effectiveness and biological compatibility of different generations of dentin adhesives

Besides possessing good mechanical properties, dental materials should present a good biological behavior and should not injure the involved tissues. Bond strength and biocompatibility are both highly significant properties of dentin adhesives. For that matter, these properties of four generations of adhesive systems (Multi-Purpose/Single Bond/SE Plus/Easy Bond) were evaluated.Eighty bovine teeth had their dentin exposed (500- and 200-mu m thickness). Adhesive was applied on the dentin layer of each specimen. Following that, the microshearing test was performed for all samples. A dentin barrier test was used for the cytotoxicity evaluation. Cell cultures (SV3NeoB) were collected from testing materials by means of 200- or 500-mu m-thick dentin slices and placed in a cell culture perfusion chamber. Cell viability was measured 24 h post-exposition by means of a photometrical test (MTT test).The best bonding performance was shown by the single-step adhesive Easy Bond (21 MPa, 200 mu m; 27 MPa, 500 mu m) followed by Single Bond (15.6 MPa, 200 mu m; 23.4 MPa, 500 mu m), SE Plus (18.2 MPa, 200 mu m; 20 MPa, 500 mu m), and Multi-Purpose (15.2 MPa, 200 mu m; 17.9 MPa, 500 mu m). Regarding the cytotoxicity, Multi-Purpose slightly reduced the cell viability to 92 % (200 mu m)/93 % (500 mu m). Single Bond was reasonably cytotoxic, reducing cell viability to 71 % (200 mu m)/64 % (500 mu m). The self-etching adhesive Scotchbond SE decreased cell viability to 85 % (200 mu m)/71 % (500 mu m). Conversely, Easy Bond did not reduce cell viability in this test, regardless of the dentin thickness.Results showed that the one-step system had the best bond strength performance and was the least toxic to pulp cells. In multiple-step systems, a correct bonding technique must be done, and a pulp capping strategy is necessary for achieving good performance in both properties.The study showed a promising system (one-step self-etching), referring to it as a good alternative for specific cases, mainly due to its technical simplicity and good biological responses.

Comparative analysis between overlapping and non-overlapping operation modes for the PWM buck converter using the three-state switching cell

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effect of sublethal doses of the insecticide imidacloprid on adaptive traits of Drosophila melanogaster: Response to treatment over and after 15 consecutive generations

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Overlapping regionalism e proliferação de instituições na América Latina: complementariedade e fragmentação nas agendas regionais

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Degree of conversion of nanofilled and microhybrid composite resins photo-activated by different generations of LEDs

Objective: This study aimed at evaluating the degree of conversion (DC) of four composite resins, being one nanofilled and 3 microhybrid resins, photo-activated with second- and third-generation light-emitting diodes (LEDs). Material and methods: Filtek (TM) Z350 nanofilled composite resins and Amelogen (R) Plus, Vit-l-escence (TM) and Opallis microhybrid resins were photo-activated with two second-generation LEDs (Radii-cal and Elipar Free Light (TM) 2) and one third-generation LED (Ultra-Lume LED 5) by continuous light mode, and a quartz halogen-tungsten bulb (QHT, control). After 24 h of storage, the samples were pulverized into fine powder and 5 mg of each material were mixed with 100 mg of potassium bromide (KBr). After homogenization, they were pressed, which resulted in a pellet that was evaluated using an infrared spectromer (Nexus 470, Thermo Nicolet) equipped with TGS detector using diffuse reflectance (32 scans, resolution of 4 cm(-1)) coupled to a computer. The percentage of unreacted carbon-carbon double bonds (% C=C) was determined from the ratio of absorbance intensities of aliphatic C=C (peak at 1637 cm-1) against internal standard before and after curing of the specimen: aromatic C-C (peak at 1610 cm-1). Results: The ANOVA showed a significant effect on the interaction between the light-curing units (LCUs) and the composite resins (p<0.001). The Tukey's test showed that the nanofilled resin (Filtek (TM) Z350) and Opallis when photo-activated by the halogen lamp (QTH) had the lowest DC compared with the other microhybrid composite resins. The DC of the nanofilled resin (Filtek (TM) Z350) was also lower using LEDs. The highest degrees of conversion were obtained using the third-generation LED and one of second-generation LEDs (Elipar Free Light (TM) 2). Conclusions: The nanofilled resin showed the lowest DC, and the Vit-l-escence (TM) microhybrid composite resin showed the highest DC. Among the LCUs, it was not possible to establish an order, even though the second-generation LED Radii-cal provided the lowest DC.