842 resultados para new degree program
Resumo:
Expediting new program development can help universities meet student and employer demand while gaining an edge over competitors, but coordinating program development and approval requires careful preparation and execution. This report profiles strategies to measure market demand for new programs, choose programs for accelerated development, and leverage internal resources. The report also suggests ways to structure and staff program development to maximize speed and effectiveness.
Resumo:
Includes bibliography
Resumo:
This paper offers the physical and chemical characterization of a new dextran produced by Leuconostoc mesenteroides FT045B. The chemical structure was determined by Fourier Transform Infrared spectroscopy and 1H Nuclear Magnetic Resonance spectroscopy. The dextran was hydrolyzed by endodextranase; the products were analyzed using thin layer chromatography and compared with those of commercial B-512F dextran. The number-average molecular weight and degree of polymerization of the FT045B dextran were determined by the measurement of the reducing value using the copper bicinchoninate method and the measurement of total carbohydrate using the phenol-sulfuric acid method. The data revealed that the structure of the dextran synthesized by FT045B dextran sucrase is composed of d-glucose residues, containing 97.9% α-(1,6) linkages in the main chains and 2.1% α-(1,3) branch linkages compared with the commercial B-512F dextran, which has 95% α-(1,6) linkages in the main chains and 5% α-(1,3) branch linkages. © 2012 Elsevier Ltd. All rights reserved.
Resumo:
We enacted a bill in Ohio this year, Senate Bill 445, that has to do with the application of pesticides. It is a very wide bill as you would normally look at it with most of the meat going to come from the regulations that are presently being written into it. In other words, the framework was developed and accepted by the two houses in our state legislature and empowered the Director of Agriculture to establish the regulations or the so-called teeth to this bill. The governor signed the bill in June and it became effective in September. The committees as of this time are meeting to develop philosophies and regulations that will be promulgated and brought into hearings and sifted through, and eventually, with a target date of December of this year, (1970), brought to the Director of Agriculture's office for acceptance. There is a committee established for rodent and bird control which is very well represented by our industry here in Ohio. John Beck (Rose Exterminator Company) is the chairman of the committee, William B. Jackson (Bowling Green State University) and Robert Yaeger (Cincinnati) are also on the committee. The important feature of this new law, in terms of pest control operators, is the examinations that will be required. We operators and our service people will both be tested and licensed, if sufficient proficiency is demonstrated on the tests. For your information they use a little different terminology in the bill than we in the industry normally use. We think of an applicator in the industry as service people. In the bill an applicator is defined as an operator. Therefore in reading the law the word operator means the man who does the job, the service man. Just the reverse is true in the industry. We think of the operator as the man who owns or manages the company while these people are referred to in the bill as applicators. The Bill calls for the development of schools for the training of our people throughout the state. Those of us who are in bird control should begin to prepare ourselves to meet this request, to be available for the schooling, have our people available for the schooling, and give this program all the co-operation that we can.
Resumo:
The purpose of this study was to design, implement and evaluate the effectiveness of a date rape prevention program among new students at Rice University. Six-hundred and fifteen new students were randomly assigned to one of eight residential colleges or dormitories. The distribution of students to each of the dormitories was carried out in accordance with a stratified random sampling procedure. The study population was divided into strata based on ethnicity, gender, geographical region, and academic major. The number of students randomly assigned to each of the eight dormitories was approximately 75. After this procedure was completed, each of the colleges was randomly selected to either the intervention or control group. A randomized pretest and posttest control group design was used to assess changes in attitudes, self-efficacy, and behavior with regard to date rape. All participants were given an anonymous pretest and posttest measuring attitudes, self-efficacy, and behavior immediately prior to and following the intervention. The intervention group attended the play Scruples, designed to promote date rape prevention, after which they were immediately posttested. After this initial posttest the intervention group also participated in an interactive group role-playing activity led by trained peer instructors. The control group was pretested and subject to the placebo intervention of a multiculturalism play and was posttested immediately afterwards. Later in the week this group saw the Scruples play only. Both control and intervention groups were sent a two month follow-up survey questionnaire, to measure any changes in attitudes, self-efficacy, and behavior over time. As hypothesized students who saw the play Scruples showed a change in attitudes immediately posttest but no difference in self-efficacy or behavior. The two month follow-up survey showed no change in attitudes, self-efficacy, or behavior. There was a difference at pretest in males and females attitudes, with males showing significantly more rape tolerant attitudes than females. Thus, the proposed research findings will provide a better understanding of the attitudes that perpetuate date rape, and will inform strategies for prevention programs. ^
Resumo:
The relationship between degree of diastolic blood pressure (DBP) reduction and mortality was examined among hypertensives, ages 30-69, in the Hypertension Detection and Follow-up Program (HDFP). The HDFP was a multi-center community-based trial, which followed 10,940 hypertensive participants for five years. One-year survival was required for inclusion in this investigation since the one-year annual visit was the first occasion where change in blood pressure could be measured on all participants. During the subsequent four years of follow-up on 10,052 participants, 568 deaths occurred. For levels of change in DBP and for categories of variables related to mortality, the crude mortality rate was calculated. Time-dependent life tables were also calculated so as to utilize available blood pressure data over time. In addition, the Cox life table regression model, extended to take into account both time-constant and time-dependent covariates, was used to examine the relationship change in blood pressure over time and mortality.^ The results of the time-dependent life table and time-dependent Cox life table regression analyses supported the existence of a quadratic function which modeled the relationship between DBP reduction and mortality, even after adjusting for other risk factors. The minimum mortality hazard ratio, based on a particular model, occurred at a DBP reduction of 22.6 mm Hg (standard error = 10.6) in the whole population and 8.5 mm Hg (standard error = 4.6) in the baseline DBP stratum 90-104. After this reduction, there was a small increase in the risk of death. There was not evidence of the quadratic function after fitting the same model using systolic blood pressure. Methodologic issues involved in studying a particular degree of blood pressure reduction were considered. The confidence interval around the change corresponding to the minimum hazard ratio was wide and the obtained blood pressure level should not be interpreted as a goal for treatment. Blood pressure reduction was attributed, not only to pharmacologic therapy, but also to regression to the mean, and to other unknown factors unrelated to treatment. Therefore, the surprising results of this study do not provide direct implications for treatment, but strongly suggest replication in other populations. ^
Resumo:
Improving energy efficiency is an unarguable emergent issue in developing economies and an energy efficiency standard and labeling program is an ideal mechanism to achieve this target. However, there is concern regarding whether the consumers will choose the highly energy efficient appliances because of its high price in consequence of the high cost. This paper estimates how the consumer responds to introduction of the energy efficiency standard and labeling program in China. To quantify evaluation by consumers, we estimated their consumer surplus and the benefits of products based on the estimated parameters of demand function. We found the following points. First, evaluation of energy efficiency labeling by the consumer is not monotonically correlated with the number of grades. The highest efficiency label (Label 1) is not evaluated to be no less higher than labels 2 and 3, and is sometimes lower than the least energy efficient label (Label UI). This goes against the design of policy intervention. Second, several governmental policies affects in mixed directions: the subsidies for energy saving policies to the highest degree of the labels contribute to expanding consumer welfare as the program was designed. However, the replacement for new appliances policies decreased the welfare.
Resumo:
The European Union has been promoting linguistic diversity for many years as one of its main educational goals. This is an element that facilitates student mobility and student exchanges between different universities and countries and enriches the education of young undergraduates. In particular, a higher degree of competence in the English language is becoming essential for engineers, architects and researchers in general, as English has become the lingua franca that opens up horizons to internationalisation and the transfer of knowledge in today’s world. Many experts point to the Integrated Approach to Contents and Foreign Languages System as being an option that has certain benefits over the traditional method of teaching a second language that is exclusively based on specific subjects. This system advocates teaching the different subjects in the syllabus in a language other than one’s mother tongue, without prioritising knowledge of the language over the subject. This was the idea that in the 2009/10 academic year gave rise to the Second Language Integration Programme (SLI Programme) at the Escuela Arquitectura Técnica in the Universidad Politécnica Madrid (EUATM-UPM), just at the beginning of the tuition of the new Building Engineering Degree, which had been adapted to the European Higher Education Area (EHEA) model. This programme is an interdisciplinary initiative for the set of subjects taught during the semester and is coordinated through the Assistant Director Office for Educational Innovation. The SLI Programme has a dual goal; to familiarise students with the specific English terminology of the subject being taught, and at the same time improve their communication skills in English. A total of thirty lecturers are taking part in the teaching of eleven first year subjects and twelve in the second year, with around 120 students who have voluntarily enrolled in a special group in each semester. During the 2010/2011 academic year the degree of acceptance and the results of the SLI Programme have been monitored. Tools have been designed to aid interdisciplinary coordination and to analyse satisfaction, such as coordination records and surveys. The results currently available refer to the first and second year and are divided into specific aspects of the different subjects involved and into general aspects of the ongoing experience.
Resumo:
The purpose of this paper is to present a program written in Matlab-Octave for the simulation of the time evolution of student curricula, i.e, how students pass their subjects along time until graduation. The program computes, from the simulations, the academic performance rates for the subjects of the study plan for each semester as well as the overall rates, which are a) the efficiency rate defined as the ratio of the number of students passing the exam to the number of students who registered for it and b) the success rate, defined as the ratio of the number of students passing the exam to the number of students who not only registered for it but also actually took it. Additionally, we compute the rates for the bachelor academic degree which are established for Spain by the National Quality Evaluation and Accreditation Agency (ANECA) and which are the graduation rate (measured as the percentage of students who finish as scheduled in the plan or taking an extra year) and the efficiency rate (measured as the percentage of credits which a student who graduated has really taken). The simulation is done in terms of the probabilities of passing all the subjects in their study plan. The application of the simulator to Polytech students in Madrid, where requirements for passing are specially stiff in first and second year subjects, is particularly relevant to analyze student cohorts and the probabilities of students finishing in the minimum of four years, or taking and extra year or two extra years, and so forth. It is a very useful tool when designing new study plans. The calculation of the probability distribution of the random variable "number of semesters a student has taken to complete the curricula and graduate" is difficult or even unfeasible to obtain analytically, and this is even truer when we incorporate uncertainty in parameter estimation. This is why we apply Monte Carlo simulation which not only provides illustration of the stochastic process but also a method for computation. The stochastic simulator is proving to be a useful tool for identification of the subjects most critical in the distribution of the number of semesters for curriculum vitae (CV) completion and subsequently for a decision making process in terms of CV planning and passing standards in the University. Simulations are performed through a graphical interface where also the results are presented in appropriate figures. The Project has been funded by the Call for Innovation in Education Projects of Universidad Politécnica de Madrid (UPM) through a Project of its school Escuela Técnica Superior de Ingenieros Industriales ETSII during the period September 2010-September 2011.