Stability and interface properties of thin cellulose ester films adsorbed from acetone and ethyl acetate solutions

Stability and interface properties of cellulose acetate propionate (CAP) and cellulose acetate butyrate (CAB) films adsorbed from acetone or ethyl acetate onto Si wafers have been investigated by means of contact angle measurements and atomic force microscopy (AFM). Surface energy (gamma(total)(S)) values determined for CAP adsorbed from acetone are larger than those from ethyl acetate. In the case of CAB films adsorbed from ethyl acetate and acetone were similar. Dewetting was observed by AFM only for CAP films prepared from ethyl acetate. Positive values of effective Hamaker constant (A(eff)) were found only for CAP prepared from ethyl acetate, corroborating with dewetting phenomena observed by AFM. Oil the contrary, negative values of A(eff) were determined for CAP and CAB prepared from acetone and for CAB prepared from ethyl acetate, Corroborating with experimental observations. Sum frequency generation (SFG) vibrational spectra indicated that CAP and CAB films prepared from ethyl acetate present more alkyl groups oriented perpendicularly to the polymer-air interface than those films prepared from acetone. Such preferential orientation corroborates with macroscopic contact angle measurements. Moreover, SFG spectra showed that acetone hinds strongly to Si wafers, creating a new surface for CAP and CAB films. (C) 2008 Elsevier Inc. All rights reserved.

Thin films of carbohydrate based surfactants and carboxymethylcellulose acetate butyrate mixtures: Morphology and thermal behavior

Thin films of mixtures containing carboxymethylcellulose acetate butyrate (CMCAB) and carbohydrate based surfactant, namely, sorbitan monopalmitate (Span 40) or poly(oxyethylene) sorbitan monopalmitate (Tween 40) were spin-coated onto silicon wafers. The effect of surfactant concentration on resulting film morphology and surface toughness Was Studied by atomic force microscopy (AFM). Upon increasing the concentration of Span 40 in the mixture, films became rougher and more heterogeneous, indicating surface enrichment by Span 40 molecules. In the case of mixtures composed by CMCAB and Tween 40, the increase of Tween 40 in the mixture led to smoother and more homogeneous films, indicating compatibility between both components. Differential scanning calorimetry (DSC) revealed that Span 40 and Tween 40 act as plasticizers for CMCAB, leading to dramatic reduction of glass transition temperature of CMCAB, namely, Delta T(g) = -158 degrees C and Delta T(g)=-179 degrees C. respectively. (C) 2008 Elsevier B.V. All rights reserved.

Catalytic oxidation of hydrocarbons by trinuclear mu-oxo-bridged ruthenium-acetate clusters: Radical versus non-radical mechanisms

The [Ru(3)O(H(3)CCO(2))(6)(py)(2)(L)]PF(6) clusters, where L=methanol or dimethyl sulfoxide, can be activated by peroxide or oxygen donor species, such as tert-butyl hydroperoxide (TBHP) or iodosylbenzene (PhIO), respectively, generating reactive intermediates of the type [Ru(3)(IV,IV,III)=0](+). In this way, they catalyse the oxidation of cyclohexane or cyclohexene by TBHP and PhIO, via oxygen atom transfer, rather than by the alternative oxygen radical mechanism characteristic of this type of complexes. In addition to their ability to perform efficient olefin epoxydation catalysis, these clusters also promote the cleavage of the C-H bond in hydrocarbons, resembling the oxidation catalysis by metal porphyrins. (C) 2008 Elsevier Inc. All rights reserved.

Characteristics of thin cellulose ester films spin-coated from acetone and ethyl acetate solutions

Spin-coated films of cellulose acetate (CA), cellulose acetate propionate (CAP), cellulose acetate butyrate (CAB) and carboxymethylcellulose acetate butyrate (CMCAB) have been characterized by ellipsometry, atomic force microscopy (AFM) and contact angle measurements. The films were spin-coated onto silicon wafers, a polar surface. Mean thickness values were determined by means of ellipsometry and AFM as a function of polymer concentration in solutions prepared either in acetone or in ethyl acetate (EA), both are good solvents for the cellulose esters. The results were discussed in the light of solvent evaporation rate and interaction energy between substrate and solvent. The effects of annealing and type of cellulose ester on film thickness, film morphology, surface roughness and surface wettability were also investigated.

Triangular ruthenium acetate clusters containing the bis(pyridyl)propane ligand and their inclusion chemistry with beta-cyclodextrin

The triruthenium carboxylate cluster [Ru(3)O(OAc)(6)(py)(2)(bpp)](+) (OAc = acetate) containing the bridging 1,3-bis(4-pyridyl)propane (bpp) ligand, and its dimeric species [{Ru(3)O(OAc)(6)(py(2))}(2)(mu-bpp)](2+) were synthesized in order to investigate their inclusion compounds with beta-cyclodextrin (beta-CD). Characterization of the complexes was carried out based on spectroscopic, electrochemical and spectroelectrochemical techniques, while the formation of inclusion complexes was evaluated using (1)H NMR/NOESY spectroscopy. Since bpp is a flexible ligand, a DFT study was carried out in order to characterize its conformational isomers and their possible role in the host-guest chemistry with beta-CD. Instead of observing the formation of inclusion compounds with different stoichiometries, we observed the formation of 1:1 bpp/beta-CD compounds in which the bpp ligand assumes different conformations. The assembly of polymetallic rotaxane species was successfully demonstrated by monitoring the (1)H NMR spectra of the monomeric cluster species in the presence of aquapentacyanoferrate(II) ions and beta-CD.

Crystal Structure Determination for Eugenyl Acetate

Essential oils are good candidates for the substitution of conventional medicinal treatments. Many articles and patents for their use have been published in recent years. The most attractive aspects of using essential oils as medicaments are their natural source and rapid permeability. Besides permeability, the solubility behavior of a drug is a key determinant of its oral bioavailability. Based on these characteristics, the aim of this study was to synthesize an essential oil derivative compound, using the raw oil extracted from Syzygium aromaticum L., without previous purification. The Eugenol molecular modification may diminish the problems of water solubility and bioavailability. The Eugenyl acetate molecule was characterized and its molecular modification investigated, including its structural properties and stereochemistry. This study was performed applying techniques, such as carbon-13 nuclear magnetic resonance spectroscopy (C-13 NMR), X-ray crystallographic analysis (XRD), powder X-ray diffraction (PXRD) and microscopic recording.

Thermal behavior and structural properites of plant-derived eugenyl acetate

Eugenol is an allyl chain-substituted guaiacol in the biosynthesized phenylpropanoid compound class derived from Syzygium aromaticum L. and widely used in folk medicine. Nonetheless, its pharmacological use is limited by some problems, such as instability when exposed to light and high temperature. In order to enhance stability, the eugenol molecule was structurally modified, resulting in eugenyl acetate. The eugenyl acetate`s thermal behavior and crystal structure was then characterized by differential scanning calorimetry (DSC) and X-ray diffraction (XRD) and compared to a commercial sample.

Development and validation of HPLC method for analysis of dexamethasone acetate in microemulsions

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Ethyl (E)-2-methoxyimino-2-(4-nitrobenzoyl)acetate

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Training on synthetic ethylene-vinyl acetate bench model allows novice medical students to acquire suture skills

PURPOSE: To assess the acquisition of suture skills by training on ethylene-vinyl acetate bench model in novice medical students.METHODS: Sixteen medical students without previous surgery experience (novices) were randomly divided into two groups. During one hour group A trained sutures on ethylene-vinyl acetate (EVA) bench model with feedback of instructors, while group B (control) received a faculty-directed training based on books and instructional videos. All students underwent a both pre-and post-tests to perform two-and three-dimensional sutures on ox tongue. All recorded performances were evaluated by two blinded evaluators, using the Global Rating Scale.RESULTS: Although both groups have had a better performance (p<0.05) in the post-test when compared with the pre-test, the analysis of post-test showed that group A (EVA) had a better performance (p<0.05) when compared with group B (control).CONCLUSION: The ethylene vinyl acetate bench model allowed the novice students to acquire suture skills faster when compared to the traditional model of teaching.

Development of estrous synchronization protocols using melengestrol acetate in Bos indicus cattle

Five experiments were conducted on commercial farms in Brazil designed to develop the basis for an estrus synchronization protocol using melengestrol acetate (MGA) in Bos indicus cattle. These studies resulted in the development of the following protocol: 0.5 mg.d(-1) of MGA between d -14 and -1; 2.0 mg i.m. injection of estradiol cypionate on d -9; 48 h temporary weaning between d 0 and 2; and natural service beginning on d 0. The basis of this protocol was to induce estrous cyclicity before postpartum loss of body condition, prevent premature luteolysis, eliminate the need for labor required to detect estrus, and consequently increase the likelihood of pregnancy early during the postpartum period. This treatment effectively induced estrous cyclicity among anestrous cows, synchronized estrus activity, and prevented premature luteolysis with no negative effect on pregnancy.

Induction of double ovulation in mares using deslorelin acetate

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Ovarian activity reversibility after the use of deslorelin acetate as a short-term contraceptive in domestic queens

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effects of prenatal hydrocortisone acetate exposure on fertility and sexual behavior in male rats

The aim of the present study was to investigate the effects of hydrocortisone during the prenatal period and its later repercussions on the fertility and sexual behavior of male rats. Pregnant rats were treated (s.c.) with hydrocortisone acetate, at 1.5 mg/day on the 17th, 18th, and 19th days of gestation. Decreased body weight and no alteration in anogenital distance were observed in male offspring. Adulthood, presented reductions of body weight, plasma testosterone levels, and seminal-vesicle wet weight without secretion as well as no alteration in the wet weights of the testes, epididymis, and seminal vesicle with secretion in the treated group. Males exposed to hydrocortisone during the prenatal period were able to mate with normal females, which became pregnant but exhibited an increased number of post-implantation losses. In spite of this, these treated males exhibited decreased male sexual behavior and the appearance of female sexual behavior after these male rats were castrated and pretreated with exogenous estrogen. These results indicate that exposure to hydrocortisone in the later stages of pregnancy may have a long-term effect on the fertility and sexual behavior of mate rats, suggesting an incomplete masculinization and defeminization of the central nervous system. (C) 2003 Elsevier B.V. (USA). All rights reserved.