992 resultados para md


Relevância:

10.00% 10.00%

Publicador:

Resumo:

Based on the embedded atom method (EAM) and molecular dynamics (MD) method, the mono-crystalline copper with different defects is investigated through tension and nanoindentation simulation. The single-crystal copper nanowire with surface defects is firstly studied through tension. For validation, the tension simulations for nanowire without defect are carried out under different temperatures and strain rates. The defects on nanowires are then systematically studied in considering different defects orientation distribution. It is found that the Young’s modulus is insensitive of surface defects and centro-plane defects. However, the yield strength and yield point show a significant decrease due to the different defects. Specially, the 〖45〗^° defect in surface and in (200) plane exerts the biggest influence to the yield strength, about 34.20% and 51.45% decrease are observed, respectively. Different defects are observed to serve as a dislocation source and different necking positions of the nanowires during tension are found. During nanoindentation simulation, dislocation is found nucleating below the contact area, but no obvious dislocation is generated around the nano-cavity. Comparing with the perfect substrate during nanoindentation, the substrate with nano-cavities emerged less dislocations, it is supposed that the nano-cavity absorbed part of the indent energy, and less plastic deformation happened in the defected substrate.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Background: Chronic diseases including type 2 diabetes are a leading cause of morbidity and mortality in midlife and older Australian women. There are a number of modifiable risk factors for type 2 diabetes and other chronic diseases including smoking, nutrition, physical activity and overweight and obesity. Little research has been conducted in the Australian context to explore the perceived barriers to health promotion activities in midlife and older Australian women with a chronic disease. Aims: The primary aim of this study was to explore women’s perceived barriers to health promotion activities to reduce modifiable risk factors, and the relationship of perceived barriers to smoking behaviour, fruit and vegetable intake, physical activity and body mass index. A secondary aim of this study was to investigate nurses’ perceptions of the barriers to action for women with a chronic disease, and to compare those perceptions with those of the women. Methods: The study was divided into two phases where Phase 1 was a cross sectional survey of women, aged over 45 years with type 2 diabetes who were attending Diabetes clinics in the Primary and Community Health Service of the Metro North Health Service District of Queensland Health (N = 22). The women were a subsample of women participating in a multi-model lifestyle intervention, the ‘Reducing Chronic Disease among Adult Australian Women’ project. Phase 2 of the study was a cross sectional online survey of nurses working in Primary and Community Health Service in the Metro North Health Service District of Queensland Health (N = 46). Pender’s health promotion model was used as the theoretical framework for this study. Results: Women in this study had an average total barriers score of 32.18 (SD = 9.52) which was similar to average scores reported in the literature for women with a range of physical disabilities and illnesses. The leading five barriers for this group of women were: concern about safety; too tired; not interested; lack of information about what to do; with lack of time and feeling I can’t do things correctly the equal fifth ranked barriers. In this study there was no statistically significant difference in average total barriers scores between women in the intervention group and those is the usual care group of the parent study. There was also no significant relationship between the women’s socio-demographic variables and lifestyle risk factors and their level of perceived barriers. Nurses in the study had an average total barriers score of 44.48 (SD = 6.24) which was higher than all other average scores reported in the literature. The leading five barriers that nurses perceived were an issue for women with a chronic disease were: lack of time and interferes with other responsibilities the leading barriers; embarrassment about appearance; lack of money; too tired and lack of support from family and friends. There was no significant relationship between the nurses’ sociodemographic and nursing variables and the level of perceived barriers. When comparing the results of women and nurses in the study there was a statistically significant difference in the median total barriers score between the groups (p < 0.001), where the nurses perceived the barriers to be higher (Md = 43) than the women (Md = 33). There was also a significant difference in the responses to the individual barriers items in fifteen of the eighteen items (p < 0.002). Conclusion: Although this study is limited by a small sample size, it contributes to understanding the perception of midlife and older women with a chronic disease and also the perception of nurses, about the barriers to healthy lifestyle activities that women face. The study provides some evidence that the perceptions of women and nurses may differ and argues that these differences may have significant implications for clinical practice. The study recommends a greater emphasis on assessing and managing perceived barriers to health promotion activities in health education and policy development and proposes a conceptual model for understanding perceived barriers to action.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The unsteady natural convection boundary layer adjacent to an instantaneously heated inclined plate is investigated using an improved scaling analysis and direct numerical simulations. The development of the unsteady natural convection boundary layer following instantaneous heating may be classified into three distinct stages including a start-up stage, a transitional stage and a steady state stage, which can be clearly identified in the analytical and numerical results. Major scaling relations of the velocity and thicknesses and the flow development time of the natural convection boundary layer are obtained using triple-layer integral solutions and verified by direct numerical simulations over a wide range of flow parameters.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Molecular dynamics (MD) simulations have been carried out to investigate the defect’s effect on the mechanical properties of single-crystal copper nanowire with different surface defects, under torsion deformation. The torsional rigidity is found insensitive to the surface defects and the critical angle appears an obvious decrease due to the surface defects, the largest decrease is found for the nanowire with surface horizon defect. The deformation mechanism appears different degrees of influence due to surface defects. The surface defects play a role of dislocation sources. Comparing with single intrinsic stacking faults formation for the perfect nanowire, much affluent deformation processes have been activated because of surface defects, for instance, we find the twins formation for the nanowire with a surface 45o defect.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Current knowledge about the relationship between transport disadvantage and activity space size is limited to urban areas, and as a result, very little is known about this link in a rural context. In addition, although research has identified transport disadvantaged groups based on their size of activity space, these studies have, however, not empirically explained such differences and the result is often a poor identification of the problems facing disadvantaged groups. Research has shown that transport disadvantage varies over time. The static nature of analysis using the activity space concept in previous research studies has lacked the ability to identify transport disadvantage in time. Activity space is a dynamic concept; and therefore possesses a great potential in capturing temporal variations in behaviour and access opportunities. This research derives measures of the size and fullness of activity spaces for 157 individuals for weekdays, weekends, and for a week using weekly activity-travel diary data from three case study areas located in rural Northern Ireland. Four focus groups were also conducted in order to triangulate quantitative findings and to explain the differences between different socio-spatial groups. The findings of this research show that despite having a smaller sized activity space, individuals were not disadvantaged because they were able to access their required activities locally. Car-ownership was found to be an important life line in rural areas. Temporal disaggregation of the data reveals that this is true only on weekends due to a lack of public transport services. In addition, despite activity spaces being at a similar size, the fullness of activity spaces of low-income individuals was found to be significantly lower compared to their high-income counterparts. Focus group data shows that financial constraint, poor connections both between public transport services and between transport routes and opportunities forced individuals to participate in activities located along the main transport corridors.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This paper examines changing patterns in the utilisation and geographic access to health services in Great Britain using National Travel Survey data (1985-2006). The utilisation rate was derived using the proportion of journeys made to access health services. Geographic access was analysed by separating the concept into its accessibility and mobility dimensions. Regression analyses were conducted to investigate the differences between different socio-spatial groups in these indicators over the period 1985-2006. This study found that journey distances to health facilities were significantly shorter and also gradually reduced over the period in question for Londoners, females, those without a car or on low incomes, and older people. However, most of their rates of utilisation of health services were found to be significantly lower because their journey times were significantly longer and also gradually increased over the periods. These findings indicate that the rate of utilisation of health services largely depends on mobility level although previous research studies have traditionally overlooked the mobility dimension.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Natural convection flow in a two-dimensional fluid saturated porous enclosure with localized heating from below, symmetrical cooling from the sides and the top and rest of the bottom walls are insulated, has been investigated numerically. Darcy’s law for porous media along with the energy equation based on the 1st law of thermodynamics has been considered. Implicit finite volume method with TDMA solver is used to solve the governing equations. Localized heating is simulated by a centrally located isothermal heat source on the bottom wall, and four different values of the dimensionless heat source length, 1/5, 2/5, 3/5 and 4/5 are considered. The effect of heat source length and the Rayleigh number on streamlines and isotherms are presented, as well as the variation of the local rate of heat transfer in terms of the local Nusselt number from the heated wall. Finally, the average Nusselt number at the heated part of the bottom wall has been shown against Rayleigh number for the non-dimensional heat source length.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Natural convection flow from an isothermal vertical plate with uniform heat source embedded in a stratified medium has been discussed in this paper. The resulting momentum and energy equations of boundary layer approximation are made non-similar by introducing the usual non-similarity transformations. Numerical solutions of these equations are obtained by an implicit finite difference method for a wide range of the stratification parameter, X. The solutions are also obtained for different values of pertinent parameters, namely, the Prandtl number, Pr and the heat generation or absorption parameter, λ and are expressed in terms of the local skin-friction and local heat transfer, which are shown in the graphical form. Effect of heat generation or absorption on the streamlines and isotherms are also shown graphically for different values of λ.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Background: Cancer patients experience distress and anxiety related to their diagnosis, treatment and the unfamiliar cancer centre. Strategies with the aim of orienting patients to a cancer care facility may improve patient outcomes. Although meeting patients' information needs at different stages is important, there is little agreement about the type of information and the timing for information to be given. Orientation interventions aim to address information needs at the start of a person's experience with a cancer care facility. The extent of any benefit of these interventions is unknown. Objectives: To assess the effects of information interventions which orient patients and their carers/family to a cancer care facility, and to the services available in the facility. Search Methods: We searched the Cochrane Central Register of Controlled Trials (CENTRAL) (The Cochrane Library 2011, Issue 2); MEDLINE (OvidSP) (1966 to Jun 2011), EMBASE (Ovid SP) (1966 to Jun 2011), CINAHL (EBSCO) (1982 to Jun 2011), PsycINFO (OvidSP) (1966 to Jun 2011), review articles and reference lists of relevant articles. We contacted principal investigators and experts in the field. Selection Criteria: Randomised controlled trials (RCTs), cluster RCTs and quasi-RCTs evaluating the effects of information interventions that orient patients and their carers/family to a cancer care facility. Data collection and analysis: Results of searches were reviewed against the pre-determined criteria for inclusion by two review authors. The primary outcomes were knowledge and understanding; health status and wellbeing, evaluation of care, and harms. Secondary outcomes were communication, skills acquisition, behavioural outcomes, service delivery, and health professional outcomes. We pooled results of RCTs using mean differences (MD) and 95% confidence intervals (CI). Main results: We included four RCTs involving 610 participants. All four trials aimed to investigate the effects of orientation programs for cancer patients to a cancer facility. There was high risk of bias across studies. Findings from two of the RCTs demonstrated significant benefits of the orientation intervention in relation to levels of distress (mean difference (MD) -8.96 (95% confidence interval (CI) -11.79 to -6.13), but non-significant benefits in relation to state anxiety levels (MD -9.77 (95% CI -24.96 to 5.41). Other outcomes for participants were generally positive (e.g. more knowledgeable about the cancer centre and cancer therapy, better coping abilities). No harms or adverse effects were measured or reported by any of the included studies. There were insufficient data on the other outcomes of interest. Authors conclusion: This review has demonstrated the feasibility and some potential benefits of orientation interventions. There was a low level of evidence suggesting that orientation interventions can reduce distress in patients. However, most of the other outcomes remain inconclusive (patient knowledge recall/ satisfaction). The majority of studies were subject to high risk of bias, and were likely to be insufficiently powered. Further well conducted and powered RCTs are required to provide evidence for determining the most appropriate intensity, nature, mode and resources for such interventions. Patient and carer-focused outcomes should be included.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Based on the embedded atom method (EAM) and molecular dynamics (MD) method, in this paper, the tensile deformation properties of Cu nanowires (NWs) with different pre-existing defects, including single surface defects, surface bi-defects and single internal defects, are systematically studied. In-depth deformation mechanisms of NWs with pre-existing defects are also explored. It is found that Young's modulus is insensitive to different pre-existing defects, but yield strength shows an obvious decrease. Defects are observed influencing greatly on NWs' tensile deformation mechanisms, and playing a role of dislocation sources. Besides of the traditional deformation process dominated by the nucleation and propagation of partial dislocations, the generations of twins, grain boundaries, fivefold deformation twins, hexagonal close-packed (HCP) structure and phase transformation from face-centred cubic (FCC) structure to HCP structure have been triggered by pre-existing defects. It is found that surface defect intends to induce larger influence to yield strength than internal defect. Most importantly, the defect that lies on slip planes exerts larger influence than other defects. As expected, it is also found that the more or longer of the defect, the bigger influence will be induced.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

A numerical investigation has been carried out for the coupled thermal boundary layers on both sides of a partition placed in an isosceles triangular enclosure along its middle symmetric line. The working fluid is considered as air which is initially quiescent. A sudden temperature difference between two zones of the enclosure has been imposed to trigger the natural convection. It is anticipated from the numerical simulations that the coupled thermal boundary layers development adjacent to the partition undergoes three distinct stages; namely an initial stage, a transitional stage and a steady state stage. Time dependent features of the coupled thermal boundary layers as well as the overall natural convection flow in the partitioned enclosure have been discussed and compared with the non-partitioned enclosure. Moreover, heat transfer as a form of local and overall average Nusselt number through the coupled thermal boundary layers and the inclined walls is also examined. The details results will be discussed in the full paper.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Based on the AFM-bending experiments, a molecular dynamics (MD) bending simulation model is established which could accurately account for the full spectrum of the mechanical properties of NWs in a double clamped beam configuration, ranging from elasticity to plasticity and failure. It is found that, loading rate exerts significant influence to the mechanical behaviours of nanowires (NWs). Specifically, a loading rate lower than 10 m/s is found reasonable for a homogonous bending deformation. Both loading rate and potential between the tip and the NW are found to play an important role in the adhesive phenomenon. The force versus displacement (F-d) curve from MD simulation is highly consistent in shapes with that from experiments. Symmetrical F-d curves during loading and unloading processes are observed, which reveal the linear-elastic and non-elastic bending deformation of NWs. The typical bending induced tensile-compressive features are observed. Meanwhile, the simulation results are excellently fitted by the classical Euler-Bernoulli beam theory with axial effect. It is concluded that, axial tensile force becomes crucial in bending deformation when the beam size is down to nanoscale for double clamped NWs. In addition, we find shorter NWs will have an earlier yielding and a larger yielding force. Mechanical properties (Young’s modulus & yield strength) obtained from both bending and tensile deformations are found comparable with each other. Specifically, the modulus is essentially similar under these two loading methods, while the yield strength during bending is observed larger than that during tension.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Magnetohydrodynamic (MHD) natural convection laminar flow from an iso-thermal horizontal circular cylinder immersed in a fluid with viscosity proportional to a linear function of temperature will be discussed with numerical simulations. The governing boundary layer equations are transformed into a non-dimensional form and the resulting nonlinear system of partial differential equa-tions are reduced to convenient form, which are solved numerically by two very efficient methods, namely, (i) Implicit finite difference method together with Keller box scheme and (ii) Direct numerical scheme. Numerical results are presented by velocity and temperature distributions of the fluid as well as heat transfer characteristics, namely the shearing stress and the local heat transfer rate in terms of the local skin-friction coefficient and the local Nusselt number for a wide range of magnetohydrodynamic parameter, viscosity-variation parameter and viscous dissipation parameter. MHD flow in this geometry with temperature dependent viscosity is absent in the literature. The results obtained from the numerical simulations have been veri-fied by two methodologies.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Objectives To assess the effects of information interventions which orient patients and their carers/family to a cancer care facility and the services available within the facility. Design Systematic review of randomised controlled trials (RCTs), cluster RCTs and quasi-RCTs. Data sources MEDLINE, CINAHL, PsycINFO, EMBASE and the Cochrane Central Register of Controlled Trials. Methods We included studies evaluating the effect of an orientation intervention, compared with a control group which received usual care, or with trials comparing one orientation intervention with another orientation intervention. Results Four RCTs of 610 participants met the criteria for inclusion. Findings from two RCTs demonstrated significant benefits of the orientation intervention in relation to reduced levels of distress (mean difference (MD): −8.96, 95% confidence interval (95%CI): −11.79 to −6.13), but non-significant benefits in relation to the levels state anxiety levels (MD −9.77) (95%CI: −24.96 to 5.41). There are insufficient data on the other outcomes of interest. Conclusions This review has demonstrated the feasibility and some potential benefits of orientation interventions. There was a low level of evidence to suggest that orientation interventions can reduce distress in patients. However, other outcomes, including patient knowledge recall/satisfaction, remain inconclusive. The majority of trials were subjected to high risk of bias and were likely to be insufficiently powered. Further well conducted and powered RCTs are required to provide evidence for determining the most appropriate intensity, nature, mode and resources for such interventions. Patient and carer-focused outcomes should be included.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Several studies of the surface effect on bending properties of a nanowire (NW) have been conducted. However, these analyses are mainly based on theoretical predictions, and there is seldom integration study in combination between theoretical predictions and simulation results. Thus, based on the molecular dynamics (MD) simulation and different modified beam theories, a comprehensive theoretical and numerical study for bending properties of nanowires considering surface/intrinsic stress effects and axial extension effect is conducted in this work. The discussion begins from the Euler-Bernoulli beam theory and Timoshenko beam theory augmented with surface effect. It is found that when the NW possesses a relatively small cross-sectional size, these two theories cannot accurately interpret the true surface effect. The incorporation of axial extension effect into Euler-Bernoulli beam theory provides a nonlinear solution that agrees with the nonlinear-elastic experimental and MD results. However, it is still found inaccurate when the NW cross-sectional size is relatively small. Such inaccuracy is also observed for the Euler-Bernoulli beam theory augmented with both contributions from surface effect and axial extension effect. A comprehensive model for completely considering influences from surface stress, intrinsic stress, and axial extension is then proposed, which leads to good agreement with MD simulation results. It is thus concluded that, for NWs with a relatively small cross-sectional size, a simple consideration of surface stress effect is inappropriate, and a comprehensive consideration of the intrinsic stress effect is required.