Heat Release, Time Required, and Cleaning Ability of Mtwo R and ProTaper Universal Retreatment Systems in the Removal of Filling Material

Introduction: This ex vivo study evaluated the heat release, time required, and cleaning efficacy of MTwo (VDW, Munich, Germany) and ProTaper Universal Retreatment systems (Dentsply/Maillefer, Ballaigues, Switzerland) and hand instrumentation in the removal of filling material. Methods: Sixty single-rooted human teeth with a single straight canal were obturated with gutta-percha and zinc oxide and eugenol-based cement and randomly allocated to 3 groups (n = 20). After 30-day storage at 37 degrees C and 100% humidity, the root fillings were removed using ProTaper UR, MTwo R, or hand files. Heat release, time required, and cleaning efficacy data were analyzed statistically (analysis of variance and the Tukey test, alpha = 0.05). Results: None of the techniques removed the root fillings completely. Filling material removal with ProTaper UR was faster but caused more heat release. Mtwo R produced less heat release than the other techniques but was the least efficient in removing gutta-percha/sealer. Conclusions: ProTaper UR and MTwo R caused the greatest and lowest temperature increase on root surface, respectively; regardless of the type of instrument, more heat was released in the cervical third. Pro Taper UR needed less time to remove fillings than MTwo R. All techniques left filling debris in the root canals. (I Endod 2010;36:1870-1873)

Chronic maxillary sinusitis associated with dental impression material

A 62-year-old man was referred for routine treatment of hyperplasia of the mucosa in the anterior lower jaw. An oroantral fistula was detected in the right superior alveolar ridge. The patient had no complaints. Plain radiographs showed a radiopaque foreign body in the posterior region associated with opacification of the maxillary sinus. Computed tomography showed the same hyperdense foreign body located in the posterior lower part of the sinus and an abnormal soft tissue mass in the entire right maxillary sinus. When asked about sinusitis, the patient mentioned occasional episodes of pus taste and intermittent crises of headache lasting for one week. The patient has been edentulous for 20 years. Sinus debridement was performed and the oroantral fistula was closed. The clinical suspicion of the presence of zinc oxide-eugenol paste was confirmed by microscopical and chemical analysis. After 6 months of follow-up, the fistula continued to be closed and sinusitis did not recur. This clinical case of maxillary chronic sinusitis illustrates a different odontogenic origin.

Briefing: Factored material properties and limit state loads-unlikely extreme or impossible pretense

In the limit state design (LSD) method each design criterion is formally stated and assessed using a performance function. The performance function defines the relationship between the design parameters and the design criterion. In practice, LSD involves factoring up loads and factoring down calculated strengths and material parameters. This provides a convenient way to carry out routine probabilistic-based design. The factors are statistically calculated to produce a design with an acceptably low probability of failure. Hence the ultimate load and the design material properties are mathematical concepts that have no physical interpretation. They may be physically impossible. Similarly, the appropriate analysis model is also defined by the performance function and may not describe the real behaviour at the perceived physical equivalent limit condition. These points must be understood to avoid confusion in the discussion and application of partial factor LSD methods.

International childcare practices study: Infant sleeping environment

Background: The International Child Care Practices Study (ICCPS) has collected descriptive data from 21 centres in 17 countries. In this report, data are presented on the infant sleeping environment with the main focus being sudden infant death syndrome (SIDS) risk factors (bedsharing and infant using a pillow) and protective factors (infant sharing a room with adult) that are not yet well established in the literature. Methods: Using a standardised protocol, parents of infants were surveyed at birth by interview and at 3 months of age mainly by postal questionnaire. Centres were grouped according to geographic location. Also indicated was the level of SIDS awareness in the community, i.e. whether any campaigns or messages to “reduce the risks of SIDS” were available at the time of the survey. Results: Birth interview data were available for 5488 individual families and 4656 (85%) returned questionnaires at 3 months. Rates of bedsharing varied considerably (2–88%) and it appeared to be more common in the samples with a lower awareness of SIDS, but not necessarily a high SIDS rate. Countries with higher rates of bedsharing appeared to have a greater proportion of infants bedsharing for a longer duration (>5 h). Rates of room sharing varied (58–100%) with some of the lowest rates noted in centres with a higher awareness of SIDS. Rates of pillow use ranged from 4% to 95%. Conclusions: It is likely that methods of bedsharing differ cross-culturally, and although further details were sought on different bedsharing practices, it was not possible to build up a composite picture of “typical” bedsharing practices in these different communities. These data highlight interesting patterns in child care in these diverse populations. Although these results should not be used to imply that any particular child care practice either increases or decreases the risk of SIDS, these findings should help to inject caution into the process of developing SIDS prevention campaigns for non-Western cultures.

Transforming the architect: Ownership form and archetype change

The adoption of the incorporated form of ownership in preference to partnership is linked to the shift to a more modem organizational archetype in professional firms. Yet existing empirical research offers insufficient insight into the organizational processes of this transformation in different professional arenas. Where ownership and control become separated, there is a clearer theoretical explanation of the implications for the way the firm is run. Where ownership and control remain inside, the firm, however, the consequences are not so clear and have not been well explored. Using survey and interview materials derived from a study of architecture practices, we examine the processes by which differences based on ownership emerge. Then, by drawing on Weberian theories, where they are concerned with professionalization as a project with material and social rewards, we specify more clearly the context for change in professional firms' archetypes. This, we conclude, provides a stronger basis for understanding the change trajectories of firms within professions and comparative organizational analysis between professions.

Racialised schooling, 'ethnic success' and Asian-Australian students

Based on discussions with Asian-Australian young women at a mixed-sex, Australia State high school, this article argues that the pro-school conformity of Asian-Australian young women sets them in a problematic and precarious relationship to the material and symbolic and processes of racialisation. The first part of the article identifies the limitations of research into the pro-school/anti-school orientations of minority students, arguing that most accounts are based on theories of culture, acculturation, class and gender, and class and race that neglect an analysis of race and sex. I then argue that practices of racialisation and sexualisation actually sustain pro-school culture and Asian female group associations. While these formations are effective in securing Asian female educational success, they are also problematic because they limit the educational possibilities and employment opportunities of Asian young women in Australia.

Beneficial effects of air inclusions on the performance of ethylene vinyl acetate (EVA) mouthguard material

Objective: To investigate the impact characteristics of an ethylene vinyl acetate (EVA) mouthguard material with regulated air inclusions, which included various air cell volumes and wall thickness between air cells. In particular, the aim was to identify the magnitude and direction of forces within the impacts. Method: EVA mouthguard material, A mm thick and with and without air inclusions, was impacted with a constant force impact pendulum with an energy of 4.4 J and a velocity of 3 m/s. Transmitted forces through the EVA material were measured using an accelerometer, which also allowed the determination of force direction and magnitude within the impacts. Results: Statistically significant reductions in the transmitted forces were observed with all the air inclusion materials when compared with EVA without air inclusions. Maximum transmitted force through one air inclusion material was reduced by 32%. Force rebound was eliminated in one material, and reduced second force impulses were observed in all the air inclusion materials. Conclusion: The regulated air inclusions improved the impact characteristics of the EVA mouthguard material, the material most commonly used in mouthguards world wide.

Effect of ethylene vinyl acetate (EVA) closed cell foam on transmitted forces in mouthguard material

Objectives: To compare transmitted forces through ethylene vinyl acetate (EVA) mouthguard material and the same EVA material with gas inclusions in the form of a closed cell foam. Method: EVA mouthguard materials with and without foam gas inclusions and 4 mm thick were impacted with a constant force from an impact pendulum. Various porosity levels in the foam materials were produced by 1%, 5%, and 10% by weight foaming agent. The forces transmitted through the EVA after energy absorption by the test materials were measured with a force sensor and compared. Results: Only minor non-significant differences in transmitted forces through the EVA with and without foam were shown. Conclusions: The inclusion of gas in the form of a closed cell foam in 4 mm thick EVA mouthguard materials did not improve the impact performance of the EVA mouthguard material.

Attitudes and practices of general practitioners in the diagnosis and management of attention-deficit/hyperactivity disorder

Objective: To assess understanding of, and actual and potential roles in management of attention-deficit/hyperactivity disorder (ADHD) among GPs. Methods: A cross-sectional questionnaire survey of Queensland GPs selected randomly from the Royal Australian College of General Practitioners directory of members was carried out. Main outcome measures were knowledge levels of ADHD, current management practices, referral patterns and self-perceived information and training needs. Results: Three hundred and ninety-nine GPs returned a completed questionnaire (response rate 76%). Roles identified by GPs were: the provisional diagnosis of ADHD and referral to specialist services for confirmation of the diagnosis and initiation of management; assistance with monitoring progress once a management plan was in place; education of the child and their family regarding the disorder; and liaison with the school where necessary. Perceived barriers to increased involvement of GPs were: time and resource constraints of general practice; concerns regarding abuse and addiction liability of prescription stimulants; complex diagnostic issues associated with childhood behavioural problems; and lack of training and education regarding ADHD. Conclusions: General practitioners identify a role for themselves in ADHD care that is largely supportive in nature and involves close liaison with specialist services.