TRFS: desenvolvimento de um protótipo para simulação microscópica de tráfego

Dissertação para obtenção do grau de Mestre em Engenharia Civil na Área de Especialização de Vias de Comunicação e Transportes

Unmixing hyperspectral data: independent and dependent component analysis

The development of high spatial resolution airborne and spaceborne sensors has improved the capability of ground-based data collection in the fields of agriculture, geography, geology, mineral identification, detection [2, 3], and classification [4–8]. The signal read by the sensor from a given spatial element of resolution and at a given spectral band is a mixing of components originated by the constituent substances, termed endmembers, located at that element of resolution. This chapter addresses hyperspectral unmixing, which is the decomposition of the pixel spectra into a collection of constituent spectra, or spectral signatures, and their corresponding fractional abundances indicating the proportion of each endmember present in the pixel [9, 10]. Depending on the mixing scales at each pixel, the observed mixture is either linear or nonlinear [11, 12]. The linear mixing model holds when the mixing scale is macroscopic [13]. The nonlinear model holds when the mixing scale is microscopic (i.e., intimate mixtures) [14, 15]. The linear model assumes negligible interaction among distinct endmembers [16, 17]. The nonlinear model assumes that incident solar radiation is scattered by the scene through multiple bounces involving several endmembers [18]. Under the linear mixing model and assuming that the number of endmembers and their spectral signatures are known, hyperspectral unmixing is a linear problem, which can be addressed, for example, under the maximum likelihood setup [19], the constrained least-squares approach [20], the spectral signature matching [21], the spectral angle mapper [22], and the subspace projection methods [20, 23, 24]. Orthogonal subspace projection [23] reduces the data dimensionality, suppresses undesired spectral signatures, and detects the presence of a spectral signature of interest. The basic concept is to project each pixel onto a subspace that is orthogonal to the undesired signatures. As shown in Settle [19], the orthogonal subspace projection technique is equivalent to the maximum likelihood estimator. This projection technique was extended by three unconstrained least-squares approaches [24] (signature space orthogonal projection, oblique subspace projection, target signature space orthogonal projection). Other works using maximum a posteriori probability (MAP) framework [25] and projection pursuit [26, 27] have also been applied to hyperspectral data. In most cases the number of endmembers and their signatures are not known. Independent component analysis (ICA) is an unsupervised source separation process that has been applied with success to blind source separation, to feature extraction, and to unsupervised recognition [28, 29]. ICA consists in finding a linear decomposition of observed data yielding statistically independent components. Given that hyperspectral data are, in given circumstances, linear mixtures, ICA comes to mind as a possible tool to unmix this class of data. In fact, the application of ICA to hyperspectral data has been proposed in reference 30, where endmember signatures are treated as sources and the mixing matrix is composed by the abundance fractions, and in references 9, 25, and 31–38, where sources are the abundance fractions of each endmember. In the first approach, we face two problems: (1) The number of samples are limited to the number of channels and (2) the process of pixel selection, playing the role of mixed sources, is not straightforward. In the second approach, ICA is based on the assumption of mutually independent sources, which is not the case of hyperspectral data, since the sum of the abundance fractions is constant, implying dependence among abundances. This dependence compromises ICA applicability to hyperspectral images. In addition, hyperspectral data are immersed in noise, which degrades the ICA performance. IFA [39] was introduced as a method for recovering independent hidden sources from their observed noisy mixtures. IFA implements two steps. First, source densities and noise covariance are estimated from the observed data by maximum likelihood. Second, sources are reconstructed by an optimal nonlinear estimator. Although IFA is a well-suited technique to unmix independent sources under noisy observations, the dependence among abundance fractions in hyperspectral imagery compromises, as in the ICA case, the IFA performance. Considering the linear mixing model, hyperspectral observations are in a simplex whose vertices correspond to the endmembers. Several approaches [40–43] have exploited this geometric feature of hyperspectral mixtures [42]. Minimum volume transform (MVT) algorithm [43] determines the simplex of minimum volume containing the data. The MVT-type approaches are complex from the computational point of view. Usually, these algorithms first find the convex hull defined by the observed data and then fit a minimum volume simplex to it. Aiming at a lower computational complexity, some algorithms such as the vertex component analysis (VCA) [44], the pixel purity index (PPI) [42], and the N-FINDR [45] still find the minimum volume simplex containing the data cloud, but they assume the presence in the data of at least one pure pixel of each endmember. This is a strong requisite that may not hold in some data sets. In any case, these algorithms find the set of most pure pixels in the data. Hyperspectral sensors collects spatial images over many narrow contiguous bands, yielding large amounts of data. For this reason, very often, the processing of hyperspectral data, included unmixing, is preceded by a dimensionality reduction step to reduce computational complexity and to improve the signal-to-noise ratio (SNR). Principal component analysis (PCA) [46], maximum noise fraction (MNF) [47], and singular value decomposition (SVD) [48] are three well-known projection techniques widely used in remote sensing in general and in unmixing in particular. The newly introduced method [49] exploits the structure of hyperspectral mixtures, namely the fact that spectral vectors are nonnegative. The computational complexity associated with these techniques is an obstacle to real-time implementations. To overcome this problem, band selection [50] and non-statistical [51] algorithms have been introduced. This chapter addresses hyperspectral data source dependence and its impact on ICA and IFA performances. The study consider simulated and real data and is based on mutual information minimization. Hyperspectral observations are described by a generative model. This model takes into account the degradation mechanisms normally found in hyperspectral applications—namely, signature variability [52–54], abundance constraints, topography modulation, and system noise. The computation of mutual information is based on fitting mixtures of Gaussians (MOG) to data. The MOG parameters (number of components, means, covariances, and weights) are inferred using the minimum description length (MDL) based algorithm [55]. We study the behavior of the mutual information as a function of the unmixing matrix. The conclusion is that the unmixing matrix minimizing the mutual information might be very far from the true one. Nevertheless, some abundance fractions might be well separated, mainly in the presence of strong signature variability, a large number of endmembers, and high SNR. We end this chapter by sketching a new methodology to blindly unmix hyperspectral data, where abundance fractions are modeled as a mixture of Dirichlet sources. This model enforces positivity and constant sum sources (full additivity) constraints. The mixing matrix is inferred by an expectation-maximization (EM)-type algorithm. This approach is in the vein of references 39 and 56, replacing independent sources represented by MOG with mixture of Dirichlet sources. Compared with the geometric-based approaches, the advantage of this model is that there is no need to have pure pixels in the observations. The chapter is organized as follows. Section 6.2 presents a spectral radiance model and formulates the spectral unmixing as a linear problem accounting for abundance constraints, signature variability, topography modulation, and system noise. Section 6.3 presents a brief resume of ICA and IFA algorithms. Section 6.4 illustrates the performance of IFA and of some well-known ICA algorithms with experimental data. Section 6.5 studies the ICA and IFA limitations in unmixing hyperspectral data. Section 6.6 presents results of ICA based on real data. Section 6.7 describes the new blind unmixing scheme and some illustrative examples. Section 6.8 concludes with some remarks.

Vertex component analysis: a geometric-based approach to unmix hyperspectral data

Hyperspectral remote sensing exploits the electromagnetic scattering patterns of the different materials at specific wavelengths [2, 3]. Hyperspectral sensors have been developed to sample the scattered portion of the electromagnetic spectrum extending from the visible region through the near-infrared and mid-infrared, in hundreds of narrow contiguous bands [4, 5]. The number and variety of potential civilian and military applications of hyperspectral remote sensing is enormous [6, 7]. Very often, the resolution cell corresponding to a single pixel in an image contains several substances (endmembers) [4]. In this situation, the scattered energy is a mixing of the endmember spectra. A challenging task underlying many hyperspectral imagery applications is then decomposing a mixed pixel into a collection of reflectance spectra, called endmember signatures, and the corresponding abundance fractions [8–10]. Depending on the mixing scales at each pixel, the observed mixture is either linear or nonlinear [11, 12]. Linear mixing model holds approximately when the mixing scale is macroscopic [13] and there is negligible interaction among distinct endmembers [3, 14]. If, however, the mixing scale is microscopic (or intimate mixtures) [15, 16] and the incident solar radiation is scattered by the scene through multiple bounces involving several endmembers [17], the linear model is no longer accurate. Linear spectral unmixing has been intensively researched in the last years [9, 10, 12, 18–21]. It considers that a mixed pixel is a linear combination of endmember signatures weighted by the correspondent abundance fractions. Under this model, and assuming that the number of substances and their reflectance spectra are known, hyperspectral unmixing is a linear problem for which many solutions have been proposed (e.g., maximum likelihood estimation [8], spectral signature matching [22], spectral angle mapper [23], subspace projection methods [24,25], and constrained least squares [26]). In most cases, the number of substances and their reflectances are not known and, then, hyperspectral unmixing falls into the class of blind source separation problems [27]. Independent component analysis (ICA) has recently been proposed as a tool to blindly unmix hyperspectral data [28–31]. ICA is based on the assumption of mutually independent sources (abundance fractions), which is not the case of hyperspectral data, since the sum of abundance fractions is constant, implying statistical dependence among them. This dependence compromises ICA applicability to hyperspectral images as shown in Refs. [21, 32]. In fact, ICA finds the endmember signatures by multiplying the spectral vectors with an unmixing matrix, which minimizes the mutual information among sources. If sources are independent, ICA provides the correct unmixing, since the minimum of the mutual information is obtained only when sources are independent. This is no longer true for dependent abundance fractions. Nevertheless, some endmembers may be approximately unmixed. These aspects are addressed in Ref. [33]. Under the linear mixing model, the observations from a scene are in a simplex whose vertices correspond to the endmembers. Several approaches [34–36] have exploited this geometric feature of hyperspectral mixtures [35]. Minimum volume transform (MVT) algorithm [36] determines the simplex of minimum volume containing the data. The method presented in Ref. [37] is also of MVT type but, by introducing the notion of bundles, it takes into account the endmember variability usually present in hyperspectral mixtures. The MVT type approaches are complex from the computational point of view. Usually, these algorithms find in the first place the convex hull defined by the observed data and then fit a minimum volume simplex to it. For example, the gift wrapping algorithm [38] computes the convex hull of n data points in a d-dimensional space with a computational complexity of O(nbd=2cþ1), where bxc is the highest integer lower or equal than x and n is the number of samples. The complexity of the method presented in Ref. [37] is even higher, since the temperature of the simulated annealing algorithm used shall follow a log( ) law [39] to assure convergence (in probability) to the desired solution. Aiming at a lower computational complexity, some algorithms such as the pixel purity index (PPI) [35] and the N-FINDR [40] still find the minimum volume simplex containing the data cloud, but they assume the presence of at least one pure pixel of each endmember in the data. This is a strong requisite that may not hold in some data sets. In any case, these algorithms find the set of most pure pixels in the data. PPI algorithm uses the minimum noise fraction (MNF) [41] as a preprocessing step to reduce dimensionality and to improve the signal-to-noise ratio (SNR). The algorithm then projects every spectral vector onto skewers (large number of random vectors) [35, 42,43]. The points corresponding to extremes, for each skewer direction, are stored. A cumulative account records the number of times each pixel (i.e., a given spectral vector) is found to be an extreme. The pixels with the highest scores are the purest ones. N-FINDR algorithm [40] is based on the fact that in p spectral dimensions, the p-volume defined by a simplex formed by the purest pixels is larger than any other volume defined by any other combination of pixels. This algorithm finds the set of pixels defining the largest volume by inflating a simplex inside the data. ORA SIS [44, 45] is a hyperspectral framework developed by the U.S. Naval Research Laboratory consisting of several algorithms organized in six modules: exemplar selector, adaptative learner, demixer, knowledge base or spectral library, and spatial postrocessor. The first step consists in flat-fielding the spectra. Next, the exemplar selection module is used to select spectral vectors that best represent the smaller convex cone containing the data. The other pixels are rejected when the spectral angle distance (SAD) is less than a given thresh old. The procedure finds the basis for a subspace of a lower dimension using a modified Gram–Schmidt orthogonalizati on. The selected vectors are then projected onto this subspace and a simplex is found by an MV T pro cess. ORA SIS is oriented to real-time target detection from uncrewed air vehicles using hyperspectral data [46]. In this chapter we develop a new algorithm to unmix linear mixtures of endmember spectra. First, the algorithm determines the number of endmembers and the signal subspace using a newly developed concept [47, 48]. Second, the algorithm extracts the most pure pixels present in the data. Unlike other methods, this algorithm is completely automatic and unsupervised. To estimate the number of endmembers and the signal subspace in hyperspectral linear mixtures, the proposed scheme begins by estimating sign al and noise correlation matrices. The latter is based on multiple regression theory. The signal subspace is then identified by selectin g the set of signal eigenvalue s that best represents the data, in the least-square sense [48,49 ], we note, however, that VCA works with projected and with unprojected data. The extraction of the end members exploits two facts: (1) the endmembers are the vertices of a simplex and (2) the affine transformation of a simplex is also a simplex. As PPI and N-FIND R algorithms, VCA also assumes the presence of pure pixels in the data. The algorithm iteratively projects data on to a direction orthogonal to the subspace spanned by the endmembers already determined. The new end member signature corresponds to the extreme of the projection. The algorithm iterates until all end members are exhausted. VCA performs much better than PPI and better than or comparable to N-FI NDR; yet it has a computational complexity between on e and two orders of magnitude lower than N-FINDR. The chapter is structure d as follows. Section 19.2 describes the fundamentals of the proposed method. Section 19.3 and Section 19.4 evaluate the proposed algorithm using simulated and real data, respectively. Section 19.5 presents some concluding remarks.

Vascularização do útero: estudo morfológico e experimental

RESUMO Os trabalhos de investigação, conducentes à elaboração do presente estudo morfofuncional, subordinado ao tema da "VASCULARIZAÇÃO ARTERIAL DO ÚTERO",fundamenta-se em conceitos da anatomia descritiva clássica, complementados por técnicas de estudo mais modernas, permitindo-nos observações originais. O principal objectivo é de definir um padrão descritivo da vascularização uterina e de estabelecer uma correlação anatomo-fisiológica e anatomo-clínica na descrição da angiomorfologia uterina, actualizando as descrições clássicas da artéria com dados de observação originais, segundo as técnicas de estudo angiomorfológicas correntemente empregues no Departamento de Anatomia da Faculdade de Ciências Médicas da Universidade Nova de Lisboa. Correlacionam-se as observações com os mais recentes dados publicados, no âmbito da imuno-histoquímica e da moderna bioquímica endocrinológica, uma vez que os conceitos modernos de fisiologia uterina e ginecológica praticamente dominam a vasta literatura científica mundial. Como objectivos particulares, ou linhas orientadoras da tese, escolhemos: - A definição de parâmetros descritivos do padrão genérico da vascularização uterina, actualizando a nomenclatura descritiva de acordo com a moderna Nomina Anatomica mundialmente debatida, desde o XIV Congresso Internacional da Federação Internacional das Associações de Anatomistas, sob a presidência do Prof. Doutor J.A. Esperança Pina (1994) e publicada em 1999-2001. - A comparação do caso humano com o do animal de experiência, por observação meticulosa do maior número de casos possíveis, realizando um estudo comparativo que nos permita extrapolar dados de experimentação animal para o caso humano; - O estabelecimento de uma correlação anatomo-fisiológica, por análise do comportamento da vascularização uterina, ao longo da vida, desde o nascimento até à menopausa, e perante as influências hormonais a que se encontra exposta. A tese constrói-se em torno de três núcleos fundamentais: 1. Um capítulo introdutório, de contextualização teórica, por enquadramento histórico dos estudos dos órgãos genitais femininos e da evolução das técnicas de diagnóstico e terapêutica do útero, focando as primeiras referências à técnica da histerotomia (Cesariana) (com a lenda persa do nascimento do herói Rostam, ou do nascimento do deus Asclepius), as primeiras representações da vascularização uterina (por LEONARDO e iii VESÁLIO), ou as primeiras descrições anatómicas do útero, da autoria de Portugueses (RODRIGO DE CASTRO, 1516 e AMATO LUSITANO, 1551). Prossegue a contextualização teórica com breve referência à recente evolução das técnicas de diagnóstico e terapêutica dos fibromiomas uterinos, mencionando de modo particular a evolução das técnicas de embolização arterial uterina, por nos parecer corresponder a um campo de aplicação imediata dos estudos da vascularização do útero. Termina este capítulo com breve referência aos trabalhos do Prof. Doutor J. MARTINS PISCO que tem actualmente, no nosso País uma das mais extensas listas de trabalhos efectuados com sucesso a nível mundial, no campo da embolização arterial de fibromiomas uterinos. 2. O segundo núcleo fundamental, intitulado "Angiomorfologia uterina" corresponde a extensa revisão bibliográfica dos estudos descritivos da vascularização uterina, desde logo ilustrando a resenha teórica com algumas imagens fotográficas de úteros humanos, seleccionadas da nossa colecção. A descrição da vascularização uterina, fundamentada em 1500 citações bibliográficas, organiza-se, de acordo com o paralelismo entre a estratificação histológica e angiológica do órgão, e a hierarquia funcional, regulada pelas cíclicas variações hormonais. Descreve-se a camada serosa e correspondente vascularização; a camada muscular e vascularização do miométrio; e, por fim, a camada mucosa e os vasos endometriais. Verifica-se, perante os dados colhidos da literatura mundial, o interesse do aprofundamento dos estudos morfológicos da microvascularização endometrial e da adaptação das descrições aos resultados dos modernos estudos funcionais obtidos por técnicas da imuno-histoquímica. 3. Fundamentados nos dados colhidos das revisões bibliográficas, elaborámos um projecto de investigação original, visando o estabelecimento da relação morfo-funcional resultante do aprofundamento dos estudos descritivos da angiomorfologia e da microvascularização do útero. O capítulo de trabalho experimental organiza-se em três principais passos: – No capítulo de Materiais e métodos, procede-se à escolha, por um lado do animal de experiência mais adequado para os estudos da vascularização uterina (por estudo comparativo ao longo da escala animal) e, por outro lado, à escolha de três das técnicas disponíveis no Laboratório de Anatomia Experimental e aplicáveis à investigação angiomorfológica do útero; iv - No capítulo de Resultados, procedemos à exposição das nossas observações de 25 úteros humanos e de 154 úteros de animais de experiência, segundo as três técnicas seleccionadas (dissecção, Injecção-corrosão-fluorescência, Injecção-diafanização e injecção-corrosão paraobservação de moldes vasculares em microscopia electrónica de varrimento), organizando aselecção da vasta iconografia coleccionada em três novos subcapítulos: o útero humano, oútero do animal de experiência e um estudo comparativo, essencial para validar osresultados do trabalho experimental. - O capítulo de trabalho experimental, inteiramente efectuado por estudos na artéria uterina do rato Wistar, abrange primeiramente a tentativa de definição macroscópica de territórios de vascularização, seguido das observações microscópicas conducentes à definição dos parâmetros angiomorfológicos característicos de cada uma das etapas da grande variabilidade a que se sujeita a vascularização uterina, ao longo da vida, incluindo a infância, a gravidez, a paridade e o envelhecimento, e consoante as fases do ciclo hormonal ovárico. Aperfeiçoámos essa tarefa com a elaboração de três experiências distintas, para análise dos efeitos microvasculares uterinos da administração exógena de preparados comerciais hormonais, por observação em microscopia electrónica de varrimento. De acordo com as leituras da literatura clássica sobre a metodologia do trabalho científico, completamos os trabalhos por um capítulo de síntese e critica dos resultados, sequencialmente organizado consoante cada um dos passos experimentais atrás referidos. SUMMARY The aim of the present thesis is the description of the uterine arterial network, complementing the classical concepts of descriptive Anatomy with modern techniques of anatomical research, thus achieving original final results and observations. One of the main objectives of the research is to establish physiological and clinical correlations in the description of the uterine angiomorphology, with the techniques currently available for angiomorphological research in the Department of Anatomy of Faculty of Medical Sciences of the New University of Lisbon. As guidelines to our research, we established the following specific objectives: - defining the descriptive parameters of the standard pattern of the uterine vasculature, according to the modern Nomina Anatomica, as underlined in the latest Federative Congresses of the International Federation of the Associations of Anatomists, one of which took place in Lisbon, in 1994, under the presidency of Professor J.A. Esperança Pina, the supervisor of the present works; - comparing the human uterus with the uterus of the experimental animal, to extrapolate the experimental observations in animals to the particular case of the human uterus; - establishing a correlation between the physiology and the anatomical observations of the uterine vasculature throughout life, from childhood to menopause and in relation to the hormonal influences to which the uterus is exposed. The thesis is built around three main chapters: 1) The introduction chapter defines the historical framework of the studies of the female genital anatomy and the historical evolution of the clinical management of common uterine diseases, focusing on the first historical references to the Caesarean section (such as the Persian legend of the birth of the hero ROSTAM, or that of the birth of ASCLEPIUS, the Greek god of Medicine); the first depictions of the uterine vasculature (by LEONARDO and VESALIUS) or the first anatomical descriptions of the uterus, by Portuguese authors (RODRIGO DE CASTRO, 1517, or AMATUS LUSITANUS, 1551). The theoretical context proceeds, with reference to the recent evolution of the clinical and surgical management of uterine fibroids, and a particular mention to the modern techniques of Uterine Fibroid Embolisation, which corresponds to one of the fields of interest of the anatomic studies of uterine arterial vascularization. 2) The second chapter, devoted to the anatomical description of the Uterine Angiomorphology, is based on an extensive review of the available Medical literature,illustrated by a selection of our own research observations of the human uterine vasculature. The description is organized in view of the parallelism between histological and angiological stratification and the functional hierarchy, under the control of the cyclic hormonal variations. Each layer of the uterine wall is depicted with photographs of the human uterus and descriptions of its specific vascular network: the serosa, the muscular Myometrium, and the mucosa, or endometrium. This classical description, based on extensive quotations of the international scientific literature, enhances our interest for the research of a more detailed knowledge of the endometrial microvascular network, accordingly to the modern physiologic results obtained through immunohistochemical studies. 3) The results of our experimental research, aiming to establish the intimate relationship between the anatomical and functional studies of uterine vasculature, are organized in three main steps: - The chapter of Materials and Methods debates the choice of the experimental animal, based on a short review of the comparative anatomy of the uterus, and uterine physiology, throughout the animal scale. The selection of three fundamental techniques of anatomic research is made from the current variety available in the Laboratory of Experimental Anatomy of the Lisbon School of Medical Sciences. - The Results of our personal research and observations of 25 human and 154 animal uteri,after dissection, and the techniques of arterial injection for the preparation of fluorescent corrosion casts, of vascular injection and clearing, and of arterial injection and preparation of corrosion casts for Scanning Electron Microscopy are rganized in terms of human or animal macroscopic anatomy and microvascular network, followed by a summary of the comparative anatomy of human and rat uteri, which is essential to validate the resultant experimental observations of the rat endometrial microvasculature. - The experimental research is entirely devoted to the uterine artery of the Wistar rat. The first step consists of the attempt to define macroscopic territories of vascularization, followed by microscopic observations for the definition of the angiomorphological pattern that is characteristic of each stage of the extreme variations to which the uterus is subject throughout life, from childhood to sexual maturity, throughout the hormonal cycle, in pregnancy, according to parity, and through ageing. We complete these observations with the experimental exposure of the Wistar rat uterus to pharmacologic preparations of hormones, currently available in clinical practice, and observations of the vascular uterine changes in Scanning Electron Microscopy. The outcome results of our anatomical observations are followed by a critical synthesis of the results.

Flucytosine + fluconazole association in the treatment of a murine experimental model of cryptococcosis

The efficacy of flucytosine (5-FC) and fluconazole (FLU) association in the treatment of a murine experimental model of cryptococcosis, was evaluated. Seven groups of 10 Balb C mice each, were intraperitoneally inoculated with 10(7) cells of Cryptococcus neoformans. Six groups were allocated to receive 5-FC (300 mg/kg) and FLU (16 mg/ kg), either combined and individually, by daily gavage beginning 5 days after the infection, for 2 and 4 weeks. One group received distilled water and was used as control. The evaluation of treatments was based on: survival time; macroscopic examination of brain, lungs, liver and spleen at autopsy; presence of capsulated yeasts in microscopic examination of wet preparations of these organs and cultures of brain homogenate. 5-FC and FLU, individually or combined, significantly prolonged the survival time of the treated animals with respect to the control group (p<0.01). Animals treated for 4 weeks survived significantly longer than those treated for 2 weeks (p<0.01). No significant differences between the animals treated with 5-FC and FLU combined or separately were observed in the survival time and morphological parameters. The association of 5-FC and FLU does not seem to be more effective than 5-FC or FLU alone, in the treatment of this experimental model of cryptococcosis.

Interferon gamma increases survival in urine experimental cryptococcosis

Systemic disease by Cryptococcus neoformans (C. neoformans) is a common opportunistic infection in immunodeficient patients. Cellular immunity seems to be the most important determinant of resistance. The aim of this study was to assess the effect of recombinant rat interferon gamma (IFN-gamma) in murine cryptococcosis (Balb/c mice infected by IP route with the Rivas strain of C. neoformans), evaluating survival time, macroscopic and microscopic examination of the organs, and massive seeding of brain homogenate. IFN-gamma treatment, at a daily dose of 10,000 IU, did not modify significantly these variables when mice were challenged with a high inoculum (10(7) yeasts) and treatment was delayed to 5 days after infection (median survival 21 days in control mice vs. 23 days in IFN-treated). Another set of experiments suggested that IFN-gamma treatment, at a dose of 10,000 IU/day, begun at the moment of infection could be useful (it prolonged survival from 20 to 28 days, although the difference did not achieve statistical signification). When used simultaneously with infection by 3.5 x 10(5) yeasts, IFN-gamma at 10,000 IU/day for 15 days significantly prolonged survival of mice (p = 0.004). These results suggest that, depending on the experimental conditions, IFN-gamma can improve survival of mice infected with a lethal dose of C. neoformans.

Estudo da exposição profissional a formaldeído em laboratórios hospitalares de anatomia patológica

RESUMO - A exposição a formaldeído é reconhecidamente um dos mais importantes factores de risco presente nos laboratórios hospitalares de anatomia patológica. Neste contexto ocupacional, o formaldeído é utilizado em solução, designada comummente por formol. Trata-se de uma solução comercial de formaldeído, normalmente diluída a 10%, sendo pouco onerosa e, por esse motivo, a eleita para os trabalhos de rotina em anatomia patológica. A solução é utilizada como fixador e conservante do material biológico, pelo que as peças anatómicas a serem processadas são previamente impregnadas. No que concerne aos efeitos para a saúde do formaldeído, os efeitos locais parecem apresentar um papel mais importante comparativamente com os efeitos sistémicos, devido à sua reactividade e rápido metabolismo nas células da pele, tracto gastrointestinal e pulmões. Da mesma forma, a localização das lesões correspondem principalmente às zonas expostas às doses mais elevadas deste agente químico, ou seja, o desenvolvimento dos efeitos tóxicos dependerá mais da intensidade da dose externa do que da duração da exposição. O efeito do formaldeído no organismo humano mais facilmente detectável é a acção irritante, transitória e reversível sobre as mucosas dos olhos e aparelho respiratório superior (naso e orofaringe), o que acontece em geral para exposições frequentes e superiores a 1 ppm. Doses elevadas são citotóxicas e podem conduzir a degenerescência e necrose das mucosas e epitélios. No que concerne aos efeitos cancerígenos, a primeira avaliação efectuada pela International Agency for Research on Cancer data de 1981, actualizada em 1982, 1987, 1995 e 2004, considerando-o como um agente cancerígeno do grupo 2A (provavelmente carcinogénico). No entanto, a mais recente avaliação, em 2006, considera o formaldeído no Grupo 1 (agente carcinogénico) com base na evidência de que a exposição a este agente é susceptível de causar cancro nasofaríngeo em humanos. Constituiu objectivo principal deste estudo caracterizar a exposição profissional a formaldeído nos laboratórios hospitalares de anatomia patológica Portugueses. Pretendeu-se, ainda, descrever os fenómenos ambientais da contaminação ambiental por formaldeído e explorar eventuais associações entre variáveis. Considerou-se uma amostra de 10 laboratórios hospitalares de anatomia patológica, avaliada a exposição dos três grupos profissionais por comparação com os dois referenciais de exposição e, ainda, conhecidos os valores de concentração máxima em 83 actividades. Foram aplicados simultaneamente dois métodos distintos de avaliação ambiental: um dos métodos (Método 1) fez uso de um equipamento de leitura directa com o princípio de medição por Photo Ionization Detection, com uma lâmpada de 11,7 eV e, simultaneamente, realizou-se o registo da actividade. Este método disponibilizou dados para o referencial de exposição da concentração máxima; o outro método (Método 2) traduziu-se na aplicação do método NIOSH 2541, implicando o uso de bombas de amostragem eléctricas de baixo caudal e posterior processamento analítico das amostras por cromatografia gasosa. Este método, por sua vez, facultou dados para o referencial de exposição da concentração média ponderada. As estratégias de medição de cada um dos métodos e a definição dos grupos de exposição existentes neste contexto ocupacional, designadamente os Técnicos de Anatomia Patológica, os Médicos Anatomo-Patologistas e os Auxiliares, foram possíveis através da informação disponibilizada pelas técnicas de observação da actividade da análise (ergonómica) do trabalho. Estudaram-se diversas variáveis independentes, nomeadamente a temperatura ambiente e a humidade relativa, a solução de formaldeído utilizada, as condições de ventilação existentes e o número médio de peças processadas por dia em cada laboratório. Para a recolha de informação sobre estas variáveis foi preenchida, durante a permanência nos laboratórios estudados, uma Grelha de Observação e Registo. Como variáveis dependentes seleccionaram-se três indicadores de contaminação ambiental, designadamente o valor médio das concentrações superiores a 0,3 ppm em cada laboratório, a Concentração Média Ponderada obtida para cada grupo de exposição e o Índice do Tempo de Regeneração de cada laboratório. Os indicadores foram calculados e definidos através dos dados obtidos pelos dois métodos de avaliação ambiental aplicados. Baseada no delineado pela Universidade de Queensland, foi ainda aplicada uma metodologia de avaliação do risco de cancro nasofaríngeo nas 83 actividades estudadas de modo a definir níveis semi-quantitativos de estimação do risco. Para o nível de Gravidade considerou-se a informação disponível em literatura científica que define eventos biológicos adversos, relacionados com o modo de acção do agente químico e os associa com concentrações ambientais de formaldeído. Para o nível da Probabilidade utilizou-se a informação disponibilizada pela análise (ergonómica) de trabalho que permitiu conhecer a frequência de realização de cada uma das actividades estudadas. A aplicação simultânea dos dois métodos de avaliação ambiental resultou na obtenção de resultados distintos, mas não contraditórios, no que concerne à avaliação da exposição profissional a formaldeído. Para as actividades estudadas (n=83) verificou-se que cerca de 93% dos valores são superiores ao valor limite de exposição definido para a concentração máxima (VLE-CM=0,3 ppm). O “exame macroscópico” foi a actividade mais estudada e onde se verificou a maior prevalência de resultados superiores ao valor limite (92,8%). O valor médio mais elevado da concentração máxima (2,04 ppm) verificou-se no grupo de exposição dos Técnicos de Anatomia Patológica. No entanto, a maior amplitude de resultados observou-se no grupo dos Médicos Anatomo-Patologistas (0,21 ppm a 5,02 ppm). No que respeita ao referencial da Concentração Média Ponderada, todos os valores obtidos nos 10 laboratórios estudados para os três grupos de exposição foram inferiores ao valor limite de exposição definido pela Occupational Safety and Health Administration (TLV-TWA=0,75 ppm). Verificou-se associação estatisticamente significativa entre o número médio de peças processadas por laboratório e dois dos três indicadores de contaminação ambiental utilizados, designadamente o valor médio das concentrações superiores a 0,3 ppm (p=0,009) e o Índice do Tempo de Regeneração (p=0,001). Relativamente à temperatura ambiente não se observou associação estatisticamente significativa com nenhum dos indicadores de contaminação ambiental utilizados. A humidade relativa apresentou uma associação estatisticamente significativa apenas com o indicador de contaminação ambiental da Concentração Média Ponderada de dois grupos de exposição, nomeadamente com os Médicos Anatomo-Patologistas (p=0,02) e os Técnicos de Anatomia Patológica (p=0,04). A aplicação da metodologia de avaliação do risco nas 83 actividades estudadas permitiu verificar que, em cerca de dois terços (35%), o risco foi classificado como (pelo menos) elevado e, ainda, constatar que 70% dos laboratórios apresentou pelo menos 1 actividade com a classificação de risco elevado. Da aplicação dos dois métodos de avaliação ambiental e das informações obtidas para os dois referenciais de exposição pode concluir-se que o referencial mais adequado é a Concentração Máxima por estar associado ao modo de actuação do agente químico. Acresce, ainda, que um método de avaliação ambiental, como o Método 1, que permite o estudo das concentrações de formaldeído e simultaneamente a realização do registo da actividade, disponibiliza informações pertinentes para a intervenção preventiva da exposição por permitir identificar as actividades com a exposição mais elevada, bem como as variáveis que a condicionam. As peças anatómicas apresentaram-se como a principal fonte de contaminação ambiental por formaldeído neste contexto ocupacional. Aspecto de particular interesse, na medida que a actividade desenvolvida neste contexto ocupacional e, em particular na sala de entradas, é centrada no processamento das peças anatómicas. Dado não se perspectivar a curto prazo a eliminação do formaldeído, devido ao grande número de actividades que envolvem ainda a utilização da sua solução comercial (formol), pode concluir-se que a exposição a este agente neste contexto ocupacional específico é preocupante, carecendo de uma intervenção rápida com o objectivo de minimizar a exposição e prevenir os potenciais efeitos para a saúde dos trabalhadores expostos. ---------------- ABSTRACT - Exposure to formaldehyde is recognized as one of the most important risk factors present in anatomy and pathology laboratories from hospital settings. In this occupational setting, formaldehyde is used in solution, typically diluted to 10%, and is an inexpensive product. Because of that, is used in routine work in anatomy and pathology laboratories. The solution is applied as a fixative and preservative of biological material. Regarding formaldehyde health effects, local effects appear to have a more important role compared with systemic effects, due to his reactivity and rapid metabolism in skin, gastrointestinal tract and lungs cells. Likewise, lesions location correspond mainly to areas exposed to higher doses and toxic effects development depend more on external dose intensity than exposure duration. Human body formaldehyde effect more easily detectable is the irritating action, transient and reversible on eyes and upper respiratory tract (nasal and throat) membranes, which happen in general for frequent exposure to concentrations higher than 1 ppm. High doses are cytotoxic and can lead to degeneration, and also to mucous membranes and epithelia necrosis. With regard to carcinogenic effects, first assessment performed by International Agency for Research on Cancer in 1981, updated in 1982, 1987, 1995 and 2004, classified formaldehyde in Group 2A (probably carcinogenic). However, most recent evaluation in 2006, classifies formaldehyde carcinogenic (Group 1), based on evidence that exposure to this agent is likely to cause nasopharyngeal cancer in humans. This study principal objective was to characterize occupational exposure to formaldehyde in anatomy and pathology hospital laboratories, as well to describe formaldehyde environmental contamination phenomena and explore possible associations between variables. It was considered a sample of 10 hospital pathology laboratories, assessed exposure of three professional groups for comparison with two exposure metrics, and also knows ceiling concentrations in 83 activities. Were applied, simultaneously, two different environmental assessment methods: one method (Method 1) using direct reading equipment that perform measure by Photo Ionization Detection, with 11,7 eV lamps and, simultaneously, make activity description and film. This method provided data for ceiling concentrations for each activity study (TLV-C). In the other applied method (Method 2), air sampling and formaldehyde analysis were performed according to NIOSH method (2541). This method provided data average exposure concentration (TLV-TWA). Measuring and sampling strategies of each methods and exposure groups definition (Technicians, Pathologists and Assistants) was possible by information provided by activities (ergonomic) analysis. Several independent variables were studied, including temperature and relative humidity, formaldehyde solution used, ventilation conditions, and also anatomic pieces mean value processed per day in each laboratory. To register information about these variables was completed an Observation and Registration Grid. Three environmental contamination indicators were selected has dependent variables namely: mean value from concentrations exceeding 0,3 ppm in each laboratory, weighted average concentration obtained for each exposure group, as well each laboratory Time Regeneration Index. These indicators were calculated and determined through data obtained by the two environmental assessment methods. Based on Queensland University proposal, was also applied a methodology for assessing nasopharyngeal cancer risk in 83 activities studied in order to obtain risk levels (semi-quantitative estimation). For Severity level was considered available information in scientific literature that defines biological adverse events related to the chemical agent action mode, and associated with environment formaldehyde concentrations. For Probability level was used information provided by (ergonomic) work analysis that helped identifies activity frequency. Environmental assessment methods provide different results, but not contradictory, regarding formaldehyde occupational exposure evaluation. In the studied activities (n=83), about 93% of the values were above exposure limit value set for ceiling concentration in Portugal (VLE-CM = 0,3 ppm). "Macroscopic exam" was the most studied activity, and obtained the higher prevalence of results superior than 0,3 ppm (92,8%). The highest ceiling concentration mean value (2,04 ppm) was obtain in Technicians exposure group, but a result wider range was observed in Pathologists group (0,21 ppm to 5,02 ppm). Concerning Method 2, results from the three exposure groups, were all lower than limit value set by Occupational Safety and Health Administration (TLV-TWA=0,75ppm). There was a statistically significant association between anatomic pieces mean value processed by each laboratory per day, and two of the three environmental contamination indicators used, namely average concentrations exceeding 0,3 ppm (p=0,009) and Time Regeneration Index (p=0,001). Temperature was not statistically associated with any environmental contamination used indicators. Relative humidity had a statistically significant association only with one environmental contamination indicator, namely weighted average concentration, particularly with Pathologists group (p=0,02) and Technicians group (p=0,04). Risk assessment performed in the 83 studied activities showed that around two thirds (35%) were classified as (at least) high, and also noted that 70% of laboratories had at least 1 activity with high risk rating. The two environmental assessment methods application, as well information obtained from two exposure metrics, allowed to conclude that most appropriate exposure metric is ceiling concentration, because is associated with formaldehyde action mode. Moreover, an environmental method, like Method 1, which allows study formaldehyde concentrations and relates them with activity, provides relevant information for preventive information, since identifies the activity with higher exposure, as well variables that promote exposure. Anatomic pieces represent formaldehyde contamination main source in this occupational setting, and this is of particular interest because all activities are focused on anatomic pieces processing. Since there is no prospect, in short term, for formaldehyde use elimination due to large number of activities that still involve solution use, it can be concluded that exposure to this agent, in this particular occupational setting, is preoccupant, requiring an rapid intervention in order to minimize exposure and prevent potential health effects in exposed workers.

Jorge Lobo’s disease: experimental inoculation in Swiss mice

Sixty-four isogenic Swiss mice were intradermically inoculated in both hind foot pads. The inocula, consisting of fungal suspensions from biopsies obtained from Jorge Lobo’s Disease patients, had the total number of fungi and the viability index determined using a Neubauer chamber and the fluorescein diacetate-ethidium bromide technique (FD-EB), respectively. The animals were sacrificed at times ranging from ten days to eighteen months after inoculation. The cellular infiltrate, mainly consisting of macrophages containing fungi, increased progressively up to end of the study; however, no macroscopic alterations were observed in the inoculated feet. After nine months, small numbers of Langhans’ giant cells started to appear in the infiltrate. A considerable number of fungi was observed at the end of the experimental period, but only a few were viable when stained by the FD-EB technique. This fact suggests that there is a multiplication of fungal cells, which are destroyed by the macrophages but remain in the tissue for a long time due perhaps to the difficulties in their elimination. These findings led us to conclude that in spite of the maintenance of the infection in these animals, Swiss mice cannot be considered an ideal model to study Jorge Lobo’s Disease. However, the authors call attention to the possibility of other mouse strains being more susceptible to Paracoccidioides loboi.

Inoculation of BALB/c mice with Lacazia loboi

In a previous study, the authors inoculated Swiss mice with Lacazia loboi (L. loboi) and succeeded in maintaining a granulomatous infiltrate and viable fungal cells up to one year and six months after inoculation. Considering the experimental work on paracoccidioidomycosis, 0.03 ml of a fungal suspension obtained from a biopsy of a Jorge Lobo's Disease patient were inoculated into both hind foot pads of 32 six week-old BALB/c mice of both sexes. The animals were sacrificed 1, 4, 7 and 10 months post inoculation. The suspension contained 1.3 x 10(6) fungi/ml and presented 38% viability. Seven months after inoculation, most of the animals presented profuse infiltrates consisting of isolated histiocytes, foreign body and Langhans' giant cells and a large number of fungi, most of them viable. Emergence of macroscopic lesions was observed during the 8th month. Based on fungal count, viability index before and after inoculation, presence of macroscopic lesions and histopathological findings similar to the findings in humans, the authors believe that BALB/c mice may be a good experimental model to study Jorge Lobo's Disease, mainly regarding therapeutic evaluation.

Design of New Materials for Passive Vibration Control

The aim of this contribution is to extend the techniques of composite materials design to non-linear material behaviour and apply it for design of new materials for passive vibration control. As a first step a computational tool allowing determination of macroscopic optimized one-dimensional isolator behaviour was developed. Voigt, Maxwell, standard and more complex material models can be implemented. Objective function considers minimization of the initial reaction and/or displacement peak as well as minimization of the steady-state amplitude of reaction and/or displacement. The complex stiffness approach is used to formulate the governing equations in an efficient way. Material stiffness parameters are assumed as non-linear functions of the displacement. The numerical solution is performed in the complex space. The steady-state solution in the complex space is obtained by an iterative process based on the shooting method which imposes the conditions of periodicity with respect to the known value of the period. Extension of the shooting method to the complex space is presented and verified. Non-linear behaviour of material parameters is then optimized by generic probabilistic meta-algorithm, simulated annealing. Dependence of the global optimum on several combinations of leading parameters of the simulated annealing procedure, like neighbourhood definition and annealing schedule, is also studied and analyzed. Procedure is programmed in MATLAB environment.

Mitral Valve Myxomas: an Unusual Entity

Primary tumours of the heart are uncommon entities, cardiac myxomas being the most frequent. However, mitral valve myxomas are exceptionally rare. In the last 12 years, there have been 25 myxomas diagnosed at our institution, with only two of them originating from the mitral valve. Both patients were female, the first, 25, and the second, 72 years old. The younger patient was very symptomatic with a large mass, 4 cm long, which involved both leaflets causing significant obstruction to the left ventricular inflow. The second one had a smaller mass located at the atrial side of the posterior leaflet that only produced some flow divergence. Neither of them had constitutional nor embolic symptoms. Both patients were submitted to emergent surgical resection that in the first case involved the mitral valve and replacement with mechanical prosthesis. The macroscopic appearance of these tumours suggested a malignant aetiology which may represent somewhat different features of the myxomas when originating from the cardiac valves. Both patients are well reflecting the good prognosis of this illness after resection, although the younger patient was re-operated because of prosthetic valve obstruction and suspicion of recurrence that was not confirmed. Because of the illustrative images and different presentations, we found it interesting to report and discuss them together.

A Rat Model of Diabetic Wound Infection for the Evaluation of Topical Antimicrobial Therapies

Diabetes mellitus is an epidemic multisystemic chronic disease that frequently is complicated by complex wound infections. Innovative topical antimicrobial therapy agents are potentially useful for multimodal treatment of these infections. However, an appropriately standardized in vivo model is currently not available to facilitate the screening of these emerging products and their effect on wound healing. To develop such a model, we analyzed, tested, and modified published models of wound healing. We optimized various aspects of the model, including animal species, diabetes induction method, hair removal technique, splint and dressing methods, the control of unintentional bacterial infection, sampling methods for the evaluation of bacterial burden, and aspects of the microscopic and macroscopic assessment of wound healing, all while taking into consideration animal welfare and the '3Rs' principle. We thus developed a new wound infection model in rats that is optimized for testing topical antimicrobial therapy agents. This model accurately reproduces the pathophysiology of infected diabetic wound healing and includes the current standard treatment (that is, debridement). The numerous benefits of this model include the ready availability of necessary materials, simple techniques, high reproducibility, and practicality for experiments with large sample sizes. Furthermore, given its similarities to infected-wound healing and treatment in humans, our new model can serve as a valid alternative for applied research.

Susceptibility and morbidity between male and female Swiss mice infected with Angiostrongylus costaricensis: Susceptibilidade e morbidade entre camundongos Swiss machos e fêmeas infectados com Angiostrongylus costaricensis

The gender of vertebrate hosts may affect the outcome of parasitic infections. An experimental murine infection with Angiostrongylus costaricensis was followed with determinations of body weight, fecal larval elimination, number and length of adult worms, number of macroscopic intestinal lesions, and mortality. Groups of male and female Swiss mice were infected with 10 3rd-stage A. costaricensis larvae per animal. The results indicate there are no significant differences related to gender of the host, except for higher length of worms developed in male mice.

DIFFERENTIATION BETWEEN Nocardia spp. AND Mycobacterium spp.: CRITICAL ASPECTS FOR BACTERIOLOGICAL DIAGNOSIS

New methodologies were developed for the identification of Nocardia but the initial diagnosis still requires a fast and accurate method, mainly due to the similarity to Mycobacterium, both clinical and bacteriologically. Growth on Löwenstein-Jensen (LJ) medium, presence of acid-fast bacilli through Ziehl-Neelsen staining, and colony morphology can be confusing aspects between Nocardia and Mycobacterium. This study describes the occurrence of Nocardia spp. in a mycobacterial-reference laboratory, observing the main difficulties in differentiating Nocardia spp. from Mycobacterium spp., and correlating isolates with nocardiosis cases. Laboratory records for the period between 2008 and 2012 were analyzed, and the isolates identified as Nocardia sp. or as non-acid-fast filamentous bacilli were selected. Epidemiological and bacteriological data were analyzed as well. Thirty-three isolates identified as Nocardia sp. and 22 as non-acid-fast bacilli were selected for this study, and represented 0.12% of isolates during the study period. The presumptive identification was based on macroscopic and microscopic morphology, resistance to lysozyme and restriction profiles using the PRA-hsp65 method. Nocardia spp. can grow on media for mycobacteria isolation (LJ and BBL MGIT™) and microscopy and colony morphology are very similar to some mycobacteria species. Seventeen patients (54.8%) were reported and treated for tuberculosis, but presented signs and symptoms of nocardiosis. It was concluded that the occurrence of Nocardia sp. during the study period was 0.12%. Isolates with characteristics of filamentous bacilli, forming aerial hyphae, with colonies that may be pigmented, rough and without the BstEII digestion pattern in PRA-hsp65 method are suggestive of Nocardia spp. For a mycobacterial routine laboratory, a flow for the presumptive identification of Nocardia is essential, allowing the use of more accurate techniques for the correct identification, proper treatment and better quality of life for patients.

THE RELEVANCE OF NUTRITIONAL STATUS AND HISTOPATHOLOGICAL FINDINGS ON THE INFECTIOUS PROCESS OF BALB/C MICE INOCULATED WITH Lacazia loboi

SUMMARY The aim of this study was to evaluate the effects of the protein-calorie malnutrition in BALB/c isogenic mice infected with Lacazia loboi, employing nutritional and histopathological parameters. Four groups were composed: G1: inoculated with restricted diet, G2: not inoculated with restricted diet, G3: inoculated with regular diet, G4: not inoculated with regular diet. Once malnutrition had been imposed, the animals were inoculated intradermally in the footpad and after four months, were sacrificed for the excision of the footpad, liver and spleen. The infection did not exert great influence on the body weight of the mice. The weight of the liver and spleen showed reduction in the undernourished groups when compared to the nourished groups. The macroscopic lesions, viability index and total number of fungi found in the footpads of the infected mice were increased in G3 when compared to G1. Regarding the histopathological analysis of the footpad, a global cellularity increase in the composition of the granuloma was observed in G3 when compared to G1, with large numbers of macrophages and multinucleated giant cells, discrete numbers of lymphocytes were present in G3 and an increase was observed in G1. The results suggest that there is considerable interaction between Jorge Lobo's disease and nutrition.