Evaluation of Maturity and Pulse Velocity Measurements for PCC Traffic Opening Decisions, HR-380, 1998

Concrete paving is often at a disadvantage in terms of pavement type selection due to the time of curing required prior to opening the pavement to traffic. The State of Iowa has been able to reduce traffic delay constraints through material selection and construction methods to date. Methods for monitoring concrete strength gain and quality have not changed since the first concrete pavements were constructed in Iowa. In 1995, Lee County and the Iowa DOT cooperated in a research project, HR-380, to construct a 7.1 mile (11. 43 km) project to evaluate the use of maturity and pulse velocity nondestructive testing (NDT) methods in the estimation of concrete strength gain. The research identified the pros and cons of each method and suggested an instructional memorandum to utilize maturity measurements to meet traffic delay demands. Maturity was used to reduce the traffic delay opening time from 5-7 days to less than 2 days through the implementation of maturity measurements and special traffic control measures. Recommendations on the development of the maturity curve for each project and the location and monitoring of the maturity thermocouples are included. Examples of equipment that could easily be used by project personnel to estimate the concrete strength using the maturity methods is described.

An improved approach for predicting the distribution of rare and endangered species from occurrence and pseudo-absence data

1. Few examples of habitat-modelling studies of rare and endangered species exist in the literature, although from a conservation perspective predicting their distribution would prove particularly useful. Paucity of data and lack of valid absences are the probable reasons for this shortcoming. Analytic solutions to accommodate the lack of absence include the ecological niche factor analysis (ENFA) and the use of generalized linear models (GLM) with simulated pseudo-absences. 2. In this study we tested a new approach to generating pseudo-absences, based on a preliminary ENFA habitat suitability (HS) map, for the endangered species Eryngium alpinum. This method of generating pseudo-absences was compared with two others: (i) use of a GLM with pseudo-absences generated totally at random, and (ii) use of an ENFA only. 3. The influence of two different spatial resolutions (i.e. grain) was also assessed for tackling the dilemma of quality (grain) vs. quantity (number of occurrences). Each combination of the three above-mentioned methods with the two grains generated a distinct HS map. 4. Four evaluation measures were used for comparing these HS maps: total deviance explained, best kappa, Gini coefficient and minimal predicted area (MPA). The last is a new evaluation criterion proposed in this study. 5. Results showed that (i) GLM models using ENFA-weighted pseudo-absence provide better results, except for the MPA value, and that (ii) quality (spatial resolution and locational accuracy) of the data appears to be more important than quantity (number of occurrences). Furthermore, the proposed MPA value is suggested as a useful measure of model evaluation when used to complement classical statistical measures. 6. Synthesis and applications. We suggest that the use of ENFA-weighted pseudo-absence is a possible way to enhance the quality of GLM-based potential distribution maps and that data quality (i.e. spatial resolution) prevails over quantity (i.e. number of data). Increased accuracy of potential distribution maps could help to define better suitable areas for species protection and reintroduction.

The global welfare impact of China: Trade integration and technological change

This paper evaluates the global welfare impact of China's trade integration and technological change in a multi-country quantitative Ricardian-Heckscher-Ohlin model.We simulate two alternative growth scenarios: a "balanced" one in which China's productivity grows at the same rate in each sector, and an "unbalanced" one in whichChina's comparative disadvantage sectors catch up disproportionately faster to theworld productivity frontier. Contrary to a well-known conjecture (Samuelson 2004),the large majority of countries experience significantly larger welfare gains whenChina's productivity growth is biased towards its comparative disadvantage sectors.This finding is driven by the inherently multilateral nature of world trade.

Management of Metals in the Pulping Process

Diplomityön tarkoituksena oli löytää keino korkean mangaanipitoisuuden hallintaan ECF-valkaisussa. Kirjallisuusosassa käsiteltiin eri metallien ja kuidun vuorovaikutuksia sekä niiden vaikutuksia prosessiin. Lisäksi käytiin läpi sellunvalmituksen yleisimpiä metallienhallintamenetelmiä. Työn kokeellisessa osassa tehtiin esikokeina laboratoriokokeita, jotta löydettiin oikeat kelatointistrategiat tehdasmittakaavan koeajoille. Laboratoriovalkaisut suoritettiin kuudella eri kemikaalilla käyttäen DD3-pesurin jälkeistä massaa ja samanlaisia parametrejä kuin tehdasvalkaisussa. Kolmesta eri valkaisusekvenssistä paras tulos saavutettiin D0-QEP-sekvenssillä. Tehdasmittakaavan koeajojen tavoitteena oli saavuttaa alle 1 mg/kg jäännösmangaanipitoisuus valkaistussa massassa ja korkeampi vaaleus EOP-vaiheessa pienemmällä klooridioksidin kulutuksella. Koeajoissa käytettiinDTPA:ta ja EDTA:ta kahdeksassa eri koepisteessä. Pienimpiin jäännöspitoisuuksiin päästiin koepisteissä, joissa kelatointiaine annosteltiin ennen valkaisun viimeistä pesuvaihetta tai sen jälkeen. Samanlaisia tuloksia saavutettiin koepisteissä, joissa kelatointiaine lisättiin suoraan EOP-vaiheeseen. Tällöin kelatointiaineen käyttö johti myös korkeampaan vaaleuteen EOP-vaiheessa pienemmällä kappakertoimella kuin referenssissä. Säästöt klooridioksidin kulutuksessa eivät olleet kuitenkaan tarpeeksi suuret kattaakseen kelatointiaineiden käytön kustannuksia. Kustannustehokkain tapa kontrolloida jäännösmangaanipitoisuutta oli EDTA:n annostelu D2 DD-pesurin jälkeen. Haittapuolena tälläisessä kelatoinnissa oli metallikompleksien palautuminen valkaisuun kuivauskoneen kiertoveden mukana. Tärkeimmät onnistuneeseen kelatointiin vaikuttavat parametrit olivat lajittelussa käytetyn rikkihapon annos, D0-vaiheen pH ja D0 DD-pesurin pesutehokkuus.

Répercussions de l'agression sur le métabolisme et la composition corporelle chez l'individu obèse : Nutrition de l'obèse agressé. [Repercussions of injury on metabolic and body composition factors in obese individuals : Nutrition and obese critical patients]

La réponse métabolique de l'obèse apparemment « sainen situation d'agression aiguë (polytraumatisés, traumatisés crâniens, patients chirurgicaux, grands brûlés, opérations électives) ne se distingue pas ou peu de celle de l'individu non-obèse. Cependant, les complications médicales liées à l'agression (insuffisances respiratoire et cardiaque, bronchopneumonie, infections de plaies, thrombophlébites et embolies) demeurent plus importantes chez l'obèse morbide que chez l'individu de poids normal. Grâce à l'inflation de ses réserves énergétiques, l'obèse apparemment sain est avantagé, par rapport au sujet mince, au cours d'une agression nutritionnelle chronique telle que le jeûne prolongé. Le facteur fonctionnel limitant la survie dépend avant tout de la composition corporelle initiale et du degré d'adaptation métabolique (et comportementale) en particulier du degré de conservation de la masse maigre par rapport à la masse grasse. La mobilisation accrue de la masse grasse associée à la perte de poids chez l'obèse (par rapport à son homologue non-obèse) est favorable à une prolongation de la vie, car, en brûlant davantage de graisse corporelle, la part des protéines corporelles endogènes utilisée à des fins énergétiques est plus faible. Il s'ensuit chez l'obèse qu'un niveau de masse maigre critique pour la survie n'est atteint qu'après une réduction très marquée de ses réserves énergétiques. En revanche, le sujet mince perd davantage de masse maigre lors de l'amaigrissement et, par conséquent, son métabolisme de repos diminuera plus rapidement que celui du sujet obèse. Cela peut constituer un avantage énergétique évident en termes d'économie d'énergie consécutive à l'adaptation métabolique, mais un inconvénient majeur quant à la durée de la survie. The metabolic response of « apparently healthyobese individuals following acute injury (multiple trauma, head injury and surgical patients, extended burns, elective surgery) is not dramatically different from that of a non-obese individuals. However, the medical complications following the injury (respiratory and cardiac insufficiency, broncho-pneumonia, infections of wounds, trombophlebitis and embolism) are more prevalent in morbid obese patients than in individuals of normal body weight. Because of a large increase in their individuals energy store, "apparently healthy" obese individuals have an advantage over very lean subjects when exposed to a chronic nutritional aggression such as total fasting. The functional limiting factor for survival depends primarily on initial body composition and the magnitude of metabolic adaptation (including behavioral adaptation). The key factor is the extent to which the fat-free mass is maintained (versus to the fat mass) during weight loss. The increased proportion of body fat mobilized during weight loss in obese patients, compared with their non-obese counterparts, favors prolonged survival, because more adipose tissue is burned off, the fraction of body protein endogenously utilized for energy purpose individuals, is smaller. This implies that obese individuals do not reach a fat-free mass "critical" for their survival until their energy stores reach very low values. In contrast, lean subject tend to lose more fat-free mass during weight loss than obese subjects and, as a result, their energy expenditure drops more rapidly. This may offer a potential advantage in terms of energy economy (more energy saving) but a major disadvantage in terms of duration of survival.

Levyrakenteistentuotteiden hitsauksen automatisointi

Työn teoriaosassa esitellään automatisodun hitsauksen etuja ja vaatimuksia. Teoriaosuuden edetessä keskitytään erityisesti robotisoituun MIG/MAG -hitsaukseen sekä teknisestä että taloudellisesta näkökulmasta katsottuna. Työn kokeelliseen osaan osallistui kaksi metallialan yritystä Pohjois-Karjalan alueelta. Ensimmäisessä yrityksessä kartoitettiin nykyisestä tuotannosta robottihitsattavia tuotteita. Tarkasteluun valituille tuotteille määriteltiin sopiva hitsausrobottijärjestelmä. Yrityksen tuotannolle oli ominaista asiakasohjautuva tuotanto, suhteellisen pienet sarjat ja tuotteet, joissa oli vähän hitsattavaa. Toisessa yrityksessä eräästä tuoteperheestä otettiin yksi tuote. Tuotteen avulla tutkittiin tuoteperheen hitsauksen automatisoinnin mahdollisuuksia ja sen aiheuttamia ongelmia. Suurimmat ongelmat tuotteen hitsauksen automatisoituessa ovat liitosten luoksepäästävyys, muodonmuutokset hitsauksen aikana ja erilaisten käytettävien materiaalien runsaus. Ensimmäisessä yrityksessä hitsattavien materiaalien paksuudet ovat pääosin kolme millimetriä tai sen alle. Toisessa yrityksessä hitsattavien materiaalin paksuudet ovat pääsääntöisesti yli kolme millimetriä. Työn kokeellisessa osassa vertaillaan ohuiden ja paksujen levyrakenteisten tuotteidenhitsauksen automatisoinnin yhteneväisyyksiä ja eroja teorian- ja käytännön osuuksien valossa.

Ilmastonmuutoksen vaikutussähköverkkoliiketoimintaan

Tässä diplomityössä tutkittiin ilmastonmuutoksen vaikutusta sähköverkkoliiketoimintaan. Ilmastonmuutosennusteet laadittiin RCAOilmastomallin antamien laskelmien perusteella. Ilmastomuuttujien ennusteet tehtiin ajanjaksolle 2016 - 2045 ja ennusteiden vertailujaksona käytettiin ajanjaksoa 1960 - 1990. Ennusteet laadittiin sadannalle, lämpötilalle, kuuraantumiselle, huurteelle, ukkoselle, routaantumiselle ja tuulisuudelle. Ilmastomuuttujien vaikutukset arvioitiin sekä tekniseltä että taloudelliselta kannalta. Ilmastonmuutoksen myötä on odotettavissa, että ilmastomuuttujien aiheuttamat rasitukset verkkoliiketoimintaa kohtaan tulevat olemaan niistä saatuja hyötyjä suuremmat. Vikamäärien kasvu on merkittävin ja haastavin ilmastonmuutoksen aiheuttama haitta. Ukkonen, lumikuormat ja tuuli tulevat aiheuttamaan nykyistä enemmän vikoja erityisesti keskijänniteverkoissa avojohdoille ellei verkkoja kehitetä vikavarmemmiksi. Lämpötilan nousun seurauksena lämmitystarve laskee ja jäähdytystarve nousee. Tämä näkyy merkittävimmin voimakkaasti lämpötilariippuvaisten käyttäjäryhmien sähkönkulutuksessa ja huippukuormissa.

Spray coating technique asa surface treatment for woodcontaining paper grades

The objective of this work was to introduce the emerging non-contacting spray coating process and compare it to the existing coating techniques. Particular emphasis was given to the details of the spraying process of paper coating colour and the base paper requirements set by the new coating method. Spraying technology itself is nothing new, but the atomisation process of paper coating colour is quite unknown to the paper industry. The differences between the rheology of painting and coating colours make it very difficult to utilise the existing information from spray painting research. Based on the trials, some basic conclusion can be made:The results of this study suggest that the Brookfield viscosity of spray coating colour should be as low as possible, presently a 50 mPas level is regarded as an optimum. For the paper quality and coater runnability, the solids level should be as high as possible. However, the graininess of coated paper surface and the nozzle wear limits the maximum solids level to 60 % at the moment. Most likelydue to the low solids and low viscosity of the coating colour the low shear Brookfield viscosity correlates very well with the paper and spray fan qualities. High shear viscosity is also important, but yet less significant than the low shear viscosity. Droplet size should be minimized and besides keeping the brrokfield viscosity low that can be helped by using a surfactant or dispersing agent in the coating colour formula. Increasing the spraying pressure in the nozzle can also reduce the droplet size. The small droplet size also improves the coating coverage, since there is hardly any levelling taking place after the impact with the base paper. Because of the lack of shear forces after the application, the pigment particles do not orientate along the paper surface. Therefore the study indicates that based on the present know-how, no quality improvements can be obtained by the use of platy type of pigments. The other disadvantage of them is the rapid deterioration of the nozzle lifetime. Further research in both coating colour rheology and nozzle design may change this in the future, but so far only round shape pigments, like typically calcium carbonate is, can be used with spray coating. The low water retention characteristics of spray coating, enhanced by the low solids and low viscosity, challenge the base paper absorption properties.Filler level has to be low not to increase the number of small pores, which have a great influence on the absorption properties of the base paper. Hydrophobic sizing reduces this absorption and prevents binder migration efficiently. High surface roughness and especially poor formation of the base paper deteriorate thespray coated paper properties. However, pre-calendering of the base paper does not contribute anything to the finished paper quality, at least at the coating colour solids level below 60 %. When targeting a standard offset LWC grade, spraycoating produces similar quality to film coating, but yet blade coating being on a slightly better level. However, because of the savings in both investment and production costs, spray coating may have an excellent future ahead. The porousnature of the spray coated surface offers an optimum substrate for the coldset printing industry to utilise the potential of high quality papers in their business.

Selective catalytic reduction of nitrogen oxides with ammonia in forced unsteady state reactors - Case based reasoning and mathematical model simulation reasoning

The application of forced unsteady-state reactors in case of selective catalytic reduction of nitrogen oxides (NOx) with ammonia (NH3) is sustained by the fact that favorable temperature and composition distributions which cannot be achieved in any steady-state regime can be obtained by means of unsteady-state operations. In a normal way of operation the low exothermicity of the selective catalytic reduction (SCR) reaction (usually carried out in the range of 280-350°C) is not enough to maintain by itself the chemical reaction. A normal mode of operation usually requires supply of supplementary heat increasing in this way the overall process operation cost. Through forced unsteady-state operation, the main advantage that can be obtained when exothermic reactions take place is the possibility of trapping, beside the ammonia, the moving heat wave inside the catalytic bed. The unsteady state-operation enables the exploitation of the thermal storage capacity of the catalyticbed. The catalytic bed acts as a regenerative heat exchanger allowing auto-thermal behaviour when the adiabatic temperature rise is low. Finding the optimum reactor configuration, employing the most suitable operation model and identifying the reactor behavior are highly important steps in order to configure a proper device for industrial applications. The Reverse Flow Reactor (RFR) - a forced unsteady state reactor - corresponds to the above mentioned characteristics and may be employed as an efficient device for the treatment of dilute pollutant mixtures. As a main disadvantage, beside its advantages, the RFR presents the 'wash out' phenomena. This phenomenon represents emissions of unconverted reactants at every switch of the flow direction. As a consequence our attention was focused on finding an alternative reactor configuration for RFR which is not affected by the incontrollable emissions of unconverted reactants. In this respect the Reactor Network (RN) was investigated. Its configuration consists of several reactors connected in a closed sequence, simulating a moving bed by changing the reactants feeding position. In the RN the flow direction is maintained in the same way ensuring uniformcatalyst exploitation and in the same time the 'wash out' phenomena is annulated. The simulated moving bed (SMB) can operate in transient mode giving practically constant exit concentration and high conversion levels. The main advantage of the reactor network operation is emphasizedby the possibility to obtain auto-thermal behavior with nearly uniformcatalyst utilization. However, the reactor network presents only a small range of switching times which allow to reach and to maintain an ignited state. Even so a proper study of the complex behavior of the RN may give the necessary information to overcome all the difficulties that can appear in the RN operation. The unsteady-state reactors complexity arises from the fact that these reactor types are characterized by short contact times and complex interaction between heat and mass transportphenomena. Such complex interactions can give rise to a remarkable complex dynamic behavior characterized by a set of spatial-temporal patterns, chaotic changes in concentration and traveling waves of heat or chemical reactivity. The main efforts of the current research studies concern the improvement of contact modalities between reactants, the possibility of thermal wave storage inside the reactor and the improvement of the kinetic activity of the catalyst used. Paying attention to the above mentioned aspects is important when higher activity even at low feeding temperatures and low emissions of unconverted reactants are the main operation concerns. Also, the prediction of the reactor pseudo or steady-state performance (regarding the conversion, selectivity and thermal behavior) and the dynamicreactor response during exploitation are important aspects in finding the optimal control strategy for the forced unsteady state catalytic tubular reactors. The design of an adapted reactor requires knowledge about the influence of its operating conditions on the overall process performance and a precise evaluation of the operating parameters rage for which a sustained dynamic behavior is obtained. An apriori estimation of the system parameters result in diminution of the computational efforts. Usually the convergence of unsteady state reactor systems requires integration over hundreds of cycles depending on the initial guess of the parameter values. The investigation of various operation models and thermal transfer strategies give reliable means to obtain recuperative and regenerative devices which are capable to maintain an auto-thermal behavior in case of low exothermic reactions. In the present research work a gradual analysis of the SCR of NOx with ammonia process in forced unsteady-state reactors was realized. The investigation covers the presentationof the general problematic related to the effect of noxious emissions in the environment, the analysis of the suitable catalysts types for the process, the mathematical analysis approach for modeling and finding the system solutions and the experimental investigation of the device found to be more suitable for the present process. In order to gain information about the forced unsteady state reactor design, operation, important system parameters and their values, mathematical description, mathematicalmethod for solving systems of partial differential equations and other specific aspects, in a fast and easy way, and a case based reasoning (CBR) approach has been used. This approach, using the experience of past similarproblems and their adapted solutions, may provide a method for gaining informations and solutions for new problems related to the forced unsteady state reactors technology. As a consequence a CBR system was implemented and a corresponding tool was developed. Further on, grooving up the hypothesis of isothermal operation, the investigation by means of numerical simulation of the feasibility of the SCR of NOx with ammonia in the RFRand in the RN with variable feeding position was realized. The hypothesis of non-isothermal operation was taken into account because in our opinion ifa commercial catalyst is considered, is not possible to modify the chemical activity and its adsorptive capacity to improve the operation butis possible to change the operation regime. In order to identify the most suitable device for the unsteady state reduction of NOx with ammonia, considering the perspective of recuperative and regenerative devices, a comparative analysis of the above mentioned two devices performance was realized. The assumption of isothermal conditions in the beginningof the forced unsteadystate investigation allowed the simplification of the analysis enabling to focus on the impact of the conditions and mode of operation on the dynamic features caused by the trapping of one reactant in the reactor, without considering the impact of thermal effect on overall reactor performance. The non-isothermal system approach has been investigated in order to point out the important influence of the thermal effect on overall reactor performance, studying the possibility of RFR and RN utilization as recuperative and regenerative devices and the possibility of achieving a sustained auto-thermal behavior in case of lowexothermic reaction of SCR of NOx with ammonia and low temperature gasfeeding. Beside the influence of the thermal effect, the influence of the principal operating parameters, as switching time, inlet flow rate and initial catalyst temperature have been stressed. This analysis is important not only because it allows a comparison between the two devices and optimisation of the operation, but also the switching time is the main operating parameter. An appropriate choice of this parameter enables the fulfilment of the process constraints. The level of the conversions achieved, the more uniform temperature profiles, the uniformity ofcatalyst exploitation and the much simpler mode of operation imposed the RN as a much more suitable device for SCR of NOx with ammonia, in usual operation and also in the perspective of control strategy implementation. Theoretical simplified models have also been proposed in order to describe the forced unsteady state reactors performance and to estimate their internal temperature and concentration profiles. The general idea was to extend the study of catalytic reactor dynamics taking into account the perspectives that haven't been analyzed yet. The experimental investigation ofRN revealed a good agreement between the data obtained by model simulation and the ones obtained experimentally.

Espacio, delincuencia y seguridad: hacia el diseño de un modelo de análisis territorial

En las próximas páginas abordaremos el análisis de datos empíricos sobre denuncias e intervenciones policiales acaecidas en la ciudad intermedia de Lérida, para establecer algunas pautas que permitan desvelar su lógica locacional, que, además, contrastaremos con otras realidades para comprobar la validez de nuestras hipótesis. Partimos de la idea de que la delincuencia es, en cierto sentido, una construcción social y, que para comprender en su complejidad los temores, que se enraízan territorialmente, es preciso superar las servidumbres que impone la lógica actuarial, que se limita a intentar mejorar la gestión de los riesgos.

Pedagogia Social Comunitària: un model d’intervenció socioeducativa integral

L’actual situació d’inestabilitat social i econòmica que viu la nostra societat ha evidenciat l’existència de grans bosses de persones que viuen en situació de marginació o exclusió social. Les polítiques socials han donat resposta a situacions concretes, però no han articulat un teixit social fort que permeti incorporar de manera efectiva la persona exclosa, ni prevenir aquests processos. Es presenta en aquest article un model d’intervenció socioeducativa anomenat Pedagogia Social Comunitària que centra la seva acció en dos objectius: la millora de la qualitat de vida i el benestar de les persones, especialment d’aquelles que es troben en situació d’exclusió social; i el foment de la cohesió social. Aquestes finalitats s’operativitzen mitjançant l’increment de la participació, l’empoderament individual i comunitari, la coresponsabilitat i la sensibilització social.

Cultures familiars, mitjans digitals i joves. Restriccions explícites i implícites en la reproducció de l'avantatge generalitzat

La irrupció dels mitjans digitals està generant en les famílies amb adolescents noves formes d'estar junts i de relacionar-se amb l'exterior, que són viscuts sovint amb ansietat per part dels pares. Per estudiar les normes que tant els pares com els seus fills estan generant per regular-les, i com aquestes regulacions es relacionen amb la reproducció de l'avantatge i el desavantatge generalitzat, es proposa superar l'orientació restringida dels riscos i oportunitats i fixar-se en canvi en la manera comles cultures i identitats familiars generen equilibris particulars en les tensions normatives del treball, el consum i l'autenticitat. Mitjançant una recerca empírica qualitativa amb 23 famílies de dos centres d'educació secundària de l'àrea metropolitana de Barcelona, es constata que enlloc de buscar com normes o estils parentals concrets es relacionen amb diferents posicions socials, és preferible analitzar com les diferents cultures i identitats familiars regulen l'adquisició d'autonomia per part dels fills. Aspectes com la familiaritat i reflexivitat vers la tecnologia, l'establiment de rutines i horaris familiars o els contextos relacionals esdevenen així claus per entendre la reproducció de l'avantatge generalitzat. Aquests elements permeten contextualitzar dinàmicament la complexa combinació de les regulacions implícites i explícites en el procés de maduració dels fills.

Real-time Quality of Service Controller for Differentiated Services

IP-verkkojen hyvin tunnettu haitta on, että nämä eivät pysty takaamaan tiettyä palvelunlaatua (Quality of Service) lähetetyille paketeille. Seuraavat kaksi tekniikkaa pidetään lupaavimpina palvelunlaadun tarjoamiselle: Differentiated Services (DiffServ) ja palvelunlaatureititys (QoS Routing). DiffServ on varsin uusi IETF:n määrittelemä Internetille tarkoitettu palvelunlaatumekanismi. DiffServ tarjoaa skaalattavaa palvelujen erilaistamista ilman viestintää joka hypyssä ja per-flow –tilan ohjausta. DiffServ on hyvä esimerkki hajautetusta verkkosuunnittelusta. Tämän palvelutasomekanismin tavoite on viestintäjärjestelmien suunnittelun yksinkertaistaminen. Verkkosolmu voidaan rakentaa pienestä hyvin määritellystä rakennuspalikoiden joukosta. Palvelunlaatureititys on reititysmekanismi, jolla liikennereittejä määritellään verkon käytettävissä olevien resurssien pohjalta. Tässä työssä selvitetään uusi palvelunlaatureititystapa, jota kutsutaan yksinkertaiseksi monitiereititykseksi (Simple Multipath Routing). Tämän työn tarkoitus on suunnitella palvelunlaatuohjain DiffServille. Tässä työssä ehdotettu palvelunlaatuohjain on pyrkimys yhdistää DiffServ ja palvelunlaatureititysmekanismeja. Työn kokeellinen osuus keskittyy erityisesti palvelunlaatureititysalgoritmeihin.

The effects of unemployment benefits on migration in lagging regions

[spa] En este trabajo se analizan los efectos sobre la movilidad geográfica de una política pública (SIPTEA) que aumenta la protección por desempleo en Extremadura y Andalucía. Utilizando la discontinuidad geográfica en la política estudiada y datos de los Censos de Población de 1981 y 1991 a nivel municipal, se estima el efecto de SIPTEA en el crecimiento de la población y en las probabilidades de emigrar e inmigrar en áreas rurales que experimentan elevadas tasas de paro y de emigración. Los resultados del trabajo indican que la política mitigó estas pérdidas de población aunque los efectos son cuantitativamente moderados. También se exploran los efectos de dicha política en el ámbito laboral, encontrándose un incremento de la tasa del desempleo asociado a la implementación de la política de entre 10 y 13 puntos porcentuales.

The effects of unemployment benefits on migration in lagging regions

[spa] En este trabajo se analizan los efectos sobre la movilidad geográfica de una política pública (SIPTEA) que aumenta la protección por desempleo en Extremadura y Andalucía. Utilizando la discontinuidad geográfica en la política estudiada y datos de los Censos de Población de 1981 y 1991 a nivel municipal, se estima el efecto de SIPTEA en el crecimiento de la población y en las probabilidades de emigrar e inmigrar en áreas rurales que experimentan elevadas tasas de paro y de emigración. Los resultados del trabajo indican que la política mitigó estas pérdidas de población aunque los efectos son cuantitativamente moderados. También se exploran los efectos de dicha política en el ámbito laboral, encontrándose un incremento de la tasa del desempleo asociado a la implementación de la política de entre 10 y 13 puntos porcentuales.