Pseudo-spectral solutions for fluid flow and heat transfer in electro-metallurgical applications

The pseudo-spectral solution method offers a flexible and fast alternative to the more usual finite element and volume methods, particularly when the long-time transient behaviour of a system is of interest. The exact solution is obtained at grid collocation points leading to superior accuracy on modest grids. Furthermore, the grid can be freely adapted in time and space to particular flow conditions or geometric variations, especially useful where strongly coupled, time-dependent, multi-physics solutions are investigated. Examples include metallurgical applications involving the interaction of electromagnetic fields and conducting liquids with a free surface. The electromagnetic field determines the instantaneous liquid volume shape, which then affects the electromagnetic field. A general methodology of the pseudo-spectral approach is presented, with several instructive example applications: the aluminium electrolysis MHD problem, induction melting in a cold crucible and the dynamics of AC/DC magnetically levitated droplets. Finally, comparisons with available analytical solutions and to experimental measurements are discussed.

Volumetric properties and enthalpies of solution of alcohols CkH2k+1OH (k = 1, 2, 6) in 1-methyl-3-alkylimidazolium bis(trifluoromethylsulfonyl)imide {[C1CnIm][NTf2] n = 2, 4, 6, 8, 10} ionic liquids

We present a study on the effect of the alkyl chain length of the imidazolium ring in 1-alkyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ionic liquids, [C1CnIm][NTf2] (n = 2 to 10), on the mixing properties of (ionic liquid + alcohol) mixtures (enthalpy and volume). We have measured small excess molar volumes with highly asymmetric curves as a function of mole fraction composition (S-shape) with more negative values in the alcohol-rich regions. The excess molar volumes increase with the increase of the alkyl-chain length of the imidazolium cation of the ionic liquid. The values of the partial molar excess enthalpy and the enthalpy of mixing are positive and, for the case of methanol, do not vary monotonously with the length of the alkyl side-chain of the cation on the ionic liquid – increasing from n = 2 to 6 and then decreasing from n = 8. This non-monotonous variation is explained by a more favourable interaction of methanol with the cation head group of the ionic liquid for alkyl chains longer than eight carbon atoms. It is also observed that the mixing is less favourable for the smaller alcohols, the enthalpy of mixing decreasing to less positive values as the alkyl chain of the alcohol increases. Based on the data from this work and on the knowledge of the vapour pressure of {[C1CnIm][NTf2] + alcohol} binary mixtures at T = 298 K reported in the literature, the excess Gibbs free energy, excess enthalpy and excess entropy could be then calculated and it was observed that these mixtures behave like the ones constituted by a non-associating and a non-polar component, with its solution behaviour being determined by the enthalpy.

Interfacial Properties of LiTFSI and LiPF6-Based Electrolytes in Binary and Ternary Mixtures of Alkylcarbonates on Graphite Electrodes and Celgard Separator

For a better understanding of the adsorption behavior of alkylcarbonate-based electrolytes on graphite electrodes and Celgard separator for Li-ion batteries applications, the interface parameters are determined by contact angle and surface tension measurements. The correlation between these parameters and chemical compositions made of alkyl carbonate with a varying nature of lithium salts (LiPF6 and LiTFSI) and volume fractions of binary and ternary mixtures containing propylene carbonate (PC), ethylene carbonate (EC), and dimethyl carbonate (DMC) is investigated. From the obtained contact angle and surface tension (?L) values for each liquid, the dispersive and polar components of the surface tension (?Ld and ?Lp) of the electrolyte and interfacial free energy between the solid and liquid (?SL) were then calculated using the Young’s equation. The variation of contact angle (?) and the surface tension, as well as the work of adhesion (WA) of binary PC/DMC mixtures on PP, PE, and PET model surfaces were also measured and commented as function of volume fraction of PC in DMC. Finally, the Zisman’s critical surface tension (?C) for studied surfaces was then obtained showing positives slopes of cos ? versus ?L. This behavior is explained by a relative higher adsorption of alkylcarbonates to the hydrogenated supports or graphite. These results are decisive to understand the performance of electrolyte/electrode material/separator interfaces in lithium-ion battery devices.

Transformative Aesthetics: Between Remembrance and Reconciliation in Contemporary Northern Irish Theatre

This article explores the ways in which two recent plays by the Tinderbox Theatre Company in Belfast – Jimmy McAleavey's The Sign of the Whale and David Ireland's Everything Between Us – engage with current political debates in Northern Ireland about how to deal with the ‘legacy of the past’. Both plays dramatise the uneasy tension between the demands for remembrance and reconciliation. I suggest that they give rise to a ‘transformative aesthetics’ that proposes an un-remembering of the past to make way for a transformative re-remembering for the future. This process, however, does not imply an easy resolution or transcendence of the antagonisms, debates, and traumatic memories. Instead, it suggests an intense and complicated engagement that sits in vexed opposition to the restorative conception of reconciliation and both a politics and a political context of ameliorative forgetting that dominates the Northern Irish Peace Process.

Thermomechanical analyses of ultrasonic welding process using thermal and acoustic softening effects

Ultrasonic welding process is a rapid manufacturing process used to weld thin layers of metal at low temperatures and low energy consumption. Experimental results have shown that ultrasonic welding is a combination of both surface (friction) and volume (plasticity) softening effects. In the presented work, a very first attempt has been made to simulate the ultrasonic welding of metals by taking into account both of these effects (surface and volume). A phenomenological material model has been proposed which incorporates these two effects (i.e. surface and volume). The thermal softening due to friction and ultrasonic (acoustic) softening has been included in the proposed material model. For surface effects a friction law with variable coefficient of friction dependent upon contact pressure, slip, temperature and number of cycles has been derived from experimental friction tests. Thermomechanical analyses of ultrasonic welding of aluminium alloy have been performed. The effects of ultrasonic welding process parameters, such as applied load, amplitude of ultrasonic vibration, and velocity of welding sonotrode on the friction work at the weld interface are being analyzed. The change in the friction work at the weld interface has been explained on the basis of softening (thermal and acoustic) of the specimen during the ultrasonic welding process. In the end, a comparison between experimental and simulated results has been presented showing a good agreement. © 2008 Elsevier Ltd. All rights reserved.

Theoretical and FE analysis of ultrasonic welding of aluminum alloy 3003

Ultrasonic welding (consolidation) process is a rapid manufacturing process that is used to join thin layers of metal at low temperature and low energy consumption. Experimental results have shown that ultrasonic welding is a combination of both surface (friction) and volume (plasticity) softening effects. In the presented work, an attempt has been made to simulate the ultrasonic welding of metals by taking into account these effects (surface and volume). A phenomenological material model has been proposed, which incorporates these two effects (i.e., surface and volume). The thermal softening due to friction and ultrasonic (acoustic) softening has been included in the proposed material model. For surface effects, a friction law with variable coefficient of friction that is dependent on contact pressure, slip, temperature, and number of cycles has been derived from experimental friction tests. The results of the thermomechanical analyses of ultrasonic welding of aluminum alloy have been presented. The goal of this work is to study the effects of ultrasonic welding process parameters, such as applied load, amplitude of ultrasonic oscillation, and velocity of welding sonotrode on the friction work at the weld interface. The change in the friction work at the weld interface has been explained on the basis of softening (thermal and acoustic) of the specimen during the ultrasonic welding process. In the end, a comparison between experimental and simulated results has been presented, showing a good agreement. Copyright © 2009 by ASME.

Optimised extraction of heterocyclic aromatic amines from blood using hollow fibre membrane liquid-phase microextraction and triple quadrupole mass spectrometry

Heterocyclic aromatic amines (HCA) are carcinogenic mutagens formed during cooking of proteinaceous foods, particularly meat. To assist in the ongoing search for biomarkers of HCA exposure in blood, a method is described for the extraction from human plasma of the most abundant HCAs: 2-Amino-1-methyl-6-phenylimidazo(4,5-b)pyridine (PhIP), 2-amino-3,8-dimethylimidazo[4,5-f]quinoxaline (MeIQx) and 2-amino-3,4,8-trimethylimidazo[4,5-f]quinoxaline (4,8-DiMeIQx) (and its isomer 7,8-DiMeIQx), using Hollow Fibre Membrane Liquid-Phase Microextraction. This technique employs 2.5 cm lengths of porous polypropylene fibres impregnated with organic solvent to facilitate simultaneous extraction from an alkaline aqueous sample into a low volume acidic acceptor phase. This low cost protocol is extensively optimised for fibre length, extraction time, sample pH and volume. Detection is by UPLC-MS/MS using positive mode electrospray ionisation with a 3.4 min runtime, with optimum peak shape, sensitivity and baseline separation being achieved at pH 9.5. To our knowledge this is the first description of HCA chromatography under alkaline conditions. Application of fixed ion ratio tolerances for confirmation of analyte identity is discussed. Assay precision is between 4.5 and 8.8% while lower limits of detection between 2 and 5 pg/mL are below the concentrations postulated for acid-labile HCA-protein adducts in blood.

Abrasive size and concentration effects on the tribo-corrosion of cast CoCrMo alloy in simulated body fluids

Some retrieved CoCrMo hip implants have shown that abrasive wear is one of the possible wear mechanisms invoked within such joints. To date, little work has focused on the third body abrasion of CoCrMo and therefore there is a general lack of understanding of the effect of abrasive size and volume concentration on the tribo-corrosion performance of the CoCrMo alloys. The present work assessed the tribo-corrosion behaviour of cast CoCrMo (F-75) under various abrasion-corrosion conditions by using a modified microabrasion tester incorporating a three-electrode electrochemical cell. The effects of reduced abrasive size/hardness and volume concentration, as well as the role of proteins on the tribo-corrosion performance of the cast CoCrMo alloy were addressed. The correlation between electrochemical and mechanical processes for different abrasion-corrosion test conditions has been discussed in detail. Results show that the reduction in abrasive size and volume concentration can significantly affect the abrasion-corrosion wear mechanisms and the wear-induced corrosion response of the material. The finding of this study implies that the smaller/softer third body particles generated in vivo could also result in significant wear-induced corrosion and therefore potential metal ion release, which could be potentially detrimental to both the patient health and the life span of the implants. © 2009 Elsevier Ltd. All rights reserved.

Micro-abrasion-corrosion of cast CoCrMo-Effects of micron and sub-micron sized abrasives

The abrasion damage on retrieved CoCrMo based hip joints is reported to be influenced by the entrainment of micron and sub-micron sized debris/hard particles. This paper represents the first attempt to look into the effects of relatively soft abrasives with micron and sub-micron dimensions on the abrasion mechanisms and the abrasion-corrosion performance of the cast CoCrMo in simulated hip joint environments. A modified micro-abrasion tester incorporating a liquid tank and a three-electrode electrochemical cell was used. Al O (300 nm and 1 μm) and sub-micron sized BaSO abrasives were chosen as being comparable in the size and hardness to the wear particles found in vivo. Results show that the specific wear rates of cast CoCrMo are dependent on the abrasive particle size, hardness and volume concentration. Larger particle size, higher hardness and greater abrasive volume fractions gave greater wear rates. The wear-induced corrosion current generally increases with increasing wear rates, and the presence of proteins seems to suppress the wear-induced corrosion current especially when abrasive volume fractions were high. This study shows that the nature of abrasives and the test solutions are both important in determining the wear mechanisms and the abrasion-corrosion response of cast CoCrMo. These findings provide new and important insights into the in vivo wear mechanisms of CoCrMo. © 2009 Elsevier B.V. All rights reserved.

The Long Aftermath: Cultural Legacies of Europe at War, 1936-2016

In its totality, the “Long Second World War”—extending from the beginning of the Spanish Civil War to the end of hostilities in 1945—has exerted enormous influence over European culture. Bringing together leading historians, sociologists, and literary and film scholars, this broadly interdisciplinary volume investigates Europeans’ individual and collective memories and the ways in which they have shaped the continent’s cultural heritage. Focusing on the major combatant nations—Spain, Britain, France, Italy, Germany, Poland, and Russia—it offers thoroughly contextualized explorations of novels, memoirs, films, and a host of other cultural forms to illuminate European public memory.

Death and Consumer Culture

Among the most veiled and emotionally charged of life’s experiences are those related to death. Given that poetry has long been recognized as an unparalleled means of expressing and understanding the most complex and emotional aspects of life (Sherry and Schouten, 2002), it is of little surprise that few poets regarded as the finest of all wordsmiths have not, since time immemorial, grappled with death.

Recently, within marketing and consumer research, poetry has slowly but progressively come to be recognized as a means by which to understand, express, celebrate, and/or confront that which defies scientific or other more “scholarly” explanation (Canniford, 2012; Wijland, 2011; Sherry and Schouten, 2002). This “poetic turn” has manifest itself most notably within the nascent realm of Consumer Culture Theory (CCT); mainly in poetry reading sessions held—with published chapbooks in hand—in concurrence with the annual CCT symposium. Death-related poetry penned by marketing and consumer researchers has there entered—albeit randomly—the CCT circuit (see, for example: Arnould, 2014; Steinfield, 2014; Gabel, 2013, 2010; Downey, 2011, 2010a, 2010b, 2010c).

This chapter represents the first formal, organized attempt to better understand death-related consumption experience and meaning via the creation and dissemination of original works of poetry. The chapter’s title reflects the broad, eclectic perspective of death and consumption herein pursued. We consider funerary and other—good, service, and ideological—product consumption activities and experiences transpiring in the context of death. We also embrace the notion that death often brutally consumes those dealing with it; a sort of “consumption of consumers by death.” In turn, as vividly expressed in several of the poems in this chapter, consumption acts or experiences and/or memories thereof may be instrumental in coping with “being consumed by death.”

Predator-free space, functional responses and invasions.

1. Predator–prey interactions are mediated by the structural complexity of habitats, but disentangling the many facets of structure that contribute to this mediation remains elusive. In a world replete with altered landscapes and biological invasions, determining how structure mediates the interactions between predators and novel prey will contribute to our understanding of invasions and predator–prey dynamics in general.
2. Here, using simplified experimental arenas, we manipulate predator-free space, whilst holding surface area and volume constant, to quantify the effects on predator–prey interactions between two resident gammarid predators and an invasive prey, the Ponto-Caspian corophiid Chelicorophium curvispinum.
3. Systematically increasing predator-free space alters the functional responses (the relationship between prey density and consumption rate) of the amphipod predators by reducing attack rates and lengthening handling times. Crucially, functional response shape also changes subtly from destabilizing Type II towards stabilizing Type III, such that small increases in predator-free space to result in significant reductions in prey consumption at low prey densities.
4. Habitats with superficially similar structural complexity can have considerably divergent consequences for prey population stability in general and, particularly, for invasive prey establishing at low densities in novel habitats.

A survey of perceived training differences between ophthalmology residents in Hong Kong and China.

Background: To study the differences in ophthalmology resident training between China and the Hong Kong Special Administrative Region (HKSAR).Methods: Training programs were selected from among the largest and best-known teaching hospitals. Ophthalmology residents were sent an anonymous 48-item questionnaire by mail. Work satisfaction, time allocation between training activities and volume of surgery performed were determined.Results: 50/75 residents (66.7 %) from China and 20/26 (76.9 %) from HKSAR completed the survey. Age (28.9 ± 2.5 vs. 30.2 ± 2.9 years, p = 0.15) and number of years in training (3.4 ± 1.6 vs. 2.8 ± 1.5, p = 0.19) were comparable between groups. The number of cataract procedures performed by HKSAR trainees (extra-capsular, median 80.0, quartile range: 30.0, 100.0; phacoemulsification, median: 20.0, quartile range: 0.0, 100.0) exceeded that for Chinese residents (extra-capsular: median = 0, p < 0.0001; phacoemulsification: median = 0, p < 0.0001). Chinese trainees spent more time completing medical charts (>50 % of time on charts: 62.5 % versus 5.3 %, p < 0.0001) and received less supervision (≥90 % of training supervised: 4.4 % versus 65 %, p < 0.0001). Chinese residents were more likely to feel underpaid (96.0 % vs. 31.6 %, p < 0.0001) and hoped their children would not practice medicine (69.4 % vs. 5.0 %, p = 0.0001) compared HKSAR residents.Conclusions: In this study, ophthalmology residents in China report strikingly less surgical experience and supervision, and lower satisfaction than HKSAR residents. The HKSAR model of hands-on resident training might be useful in improving the low cataract surgical rate in China.

Queering Memories of the Troubles: Performing LGBTQ testimonies in Northern Ireland

In Northern Ireland, decades of religious and political unrest led to the marginalization not only of rights but also the experiences and voices of those who identify as Lesbian, Gay, Bisexual, Trans and/or Queer (LGBTQ). The peace process has arguably created space in which sexual minorities can voice their experiences and articulate counter-memories to those that tend to dominate ethno-nationalist commemorations of the conflict. This essay explores two productions of Northern Ireland’s first publicly funded gay theatre company, TheatreofplucK, led by artistic director Niall Rea: D.R.A.G (Divided, Radical and Gorgeous) was first performed in 2011 and explores the personal experiences of a Belfast drag queen in the form of personal testimonial monologue. The forthcoming (November 2015) performed archive installation, Tr<uble, by Shannon Yee, assembles true-life testimonies of the LGBTQ community in Northern Ireland during and after the Troubles. I will explore how performed and performative memories have the potential to ‘queer’ remembrance of the Troubles.

Remembering forwards: or how to live together in the future with divided memories

Memory is thought to be about the past. The past is a problem in conflict transformation. This lecture suggests memory can also be about the future. It introduces the notion of remembering forwards, which is contrasted with remembering backwards. The distinction between these two forms of remembering defines the burden of memory in post-conflict societies generally and specifically in Ireland. In societies emerging out of conflict, where divided memories in part constituted the conflict, social memory privileges remembering backward. Collective and personal memories elide within social memory to perpetuate divided group identities and contested personal narratives. Above all, social memory works to arbitrate the future, by predisposing an extreme memory culture that locks people into the past. Forgetting the past is impossible and undesirable. What is needed in societies emerging out of conflict is to be released from the hold that oppressive and haunting memories have over people. This lecture will suggest that this is found in the idea of remembering forwards. This is not the same as forgetting. It is remembering to cease to remember oppressive and haunting memories. It does not involve non-remembrance but active remembering: remembering to cease to remember the past. While the past lives in us always, remembering forwards assists us in not living in the past. Remembering forwards thus allows us to live in tolerance in the future despite the reality that divided memories endure and live on. The lecture further argues that these enduring divided memories need to be reimagined by the application of truth, tolerance, togetherness and trajectory. The lecture suggests that it is through remembering forwards with truth, tolerance, togetherness and trajectory that people in post-conflict societies can inherit the future despite their divided pasts and live in tolerance in the midst of contested memories.