Atmospheric corrosion of copper and the colour, structure and composition of natural patinas on copper

This paper describes the results of atmospheric corrosion testing and of an examination of patina samples from Brisbane, Denmark, Sweden, France, USA and Austria. The aim was threefold: (1) to determine the structure of natural patinas and to relate their structure to their appearance in service and to the atmospheric corrosion of copper; (2) to understand why a brown rust coloured layer forms on the surface of some copper patinas; (3) to understand why some patinas are still black in colour despite being of significant age. During the atmospheric corrosion of copper, a two-layer patina forms on the copper surface. Cuprite is the initial corrosion product and cuprite is always the patina layer in contact with the copper. The growth laws describing patina formation indicate that the decreasing corrosion rate with increasing exposure time is due to the protective nature of the cuprite layer. The green patinas were typically characterised by an outer layer of brochantite, which forms as individual crystals on the surface of the cuprite layer, probably by a precipitation reaction from an aqueous surface layer on the cuprite layer. Natural patinas come in a variety of colours. The colour is controlled by the amount of the patina and its chemical composition. Thin patinas containing predominantly cuprite were black. If the patina was sufficiently thick, and the [Fe]/[Cu] ratio was low, then the patina was green, whereas if the [Fe]/[Cu] ratio was approximately 10 at%, then the patina is rust brown in colour. The iron was in solid solution in the brochantite, which might be designated as a (copper/iron) hydroxysulphate. In the brown patinas examined, the iron was distributed predominately in the outermost part of the patina. (c) 2005 Elsevier Ltd. All rights reserved.

Capital markets and the market structure of foreign investments

Contrary to the long-received theory of FDI, interest rates or rates of return can motivate foreign direct investment (FDI) in concert with the benefits of direct ownership. Thus, access to investor capital and capital markets is a vital component of the multinational’s competitive market structure. Moreover, multinationals can use their superior financial capacity as a competitive advantage in exploiting FDI opportunities in dynamic markets. They can also mitigate higher levels of foreign business risks under dynamic conditions by shifting more financial risk to creditors in the host economy. Furthermore, the investor’s expectation of foreign business risk necessarily commands a risk premium for exposing their equity to foreign market risk. Multinationals can modify the profit maximization strategy of their foreign subsidiaries to maximize growth or profits to generate this risk premium. In this context, we investigate how foreign subsidiaries manage their capital funding, business risk, and profit strategies with a diverse sample of 8,000 matched parents and foreign subsidiary accounts from multiple industries in 38 countries.We find that interest rates, asset prices, and expectations in capital markets have a significant effect on the capital movements of foreign subsidiaries. We also find that foreign subsidiaries mitigate their exposure to foreign business risk by modifying their capital structure and debt maturity. Further, we show how the operating strategy of foreign subsidiaries affects their preference for growth or profit maximization. We further show that superior shareholder value, which is a vital link for access to capital for funding foreign expansion in open market economies, is achieved through maintaining stability in the rate of growth and good asset utilization.

Institutions and firm ownership structure:evidence from Central and Eastern Europe

FDI plays a key role in development, particularly in resource-constrained transition economies of Central and Eastern Europe with relatively low savings rates. Gains from technology transfer play a critical role in motivating FDI, yet potential for it may be hampered by a large technology gap between the source and host country. While the extent of this gap has traditionally been attributed to education, skills and capital intensity, recent literature has also emphasized the possible role of institutional environment in this respect. Despite tremendous interest among policy-makers and academics to understand the factors attracting FDI (Bevan and Estrin, 2000; Globerman and Shapiro, 2003) our knowledge about the effects of institutions on the location choice and ownership structure of foreign firms remains limited. This paper attempts to fill this gap in the literature by examining the link between institutions and foreign ownership structures. To the best of our knowledge, Javorcik (2004) is the only papers, which use firm-level data to analyse the role of institutional quality on an outward investor’s entry mode in transition countries. Our paper extends Javorcik (2004) in a number of ways: (a) rather than a cross-section, we use panel data for the period 1997-2006; (b) rather than a binary variable, we use the percentage foreign ownership as continuous variable; (c) we consider multi-dimensional institutional variables, such as corruption, intellectual property rights protection and government stability. We also use factor analysis to generate a composite index of institutional quality and see how stronger institutional environment could affect foreign ownership; (d) we explore how the distance between institutional environment in source and host countries affect foreign ownership in a host country. The firm-level data used includes both domestic and foreign firms for the period 1997-2006 and is drawn from ORBIS, a commercially available dataset provided by Bureau van Dijk. In order to examine the link between institutions and foreign ownership structures, we estimate four log-linear ownership equations/specifications augmented by institutional and other control variables. We find evidence that the decision of a foreign firm to either locate its subsidiary or acquire an existing domestic firm depends not only on factor cost differences but also on differences in institutional environment between the host and source countries.

A comparative and longitudinal analysis of the evolving relationship between the environment and the strategy, structure and performance of selected organisations in the British carpet industry 1959-1986:a firms in sector perspective of organisational adaptation

Orthodox contingency theory links effective organisational performance to compatible relationships between the environment and organisation strategy and structure and assumes that organisations have the capacity to adapt as the environment changes. Recent contributions to the literature on organisation theory claim that the key to effective performance is effective adaptation which in turn requires the simultaneous reconciliation of efficiency and innovation which is afforded by an unique environment-organisation configuration. The literature on organisation theory recognises the continuing confusion caused by the fragmented and often conflicting results from cross-sectional studies. Although the case is made for longitudinal studies which comprehensively describe the evolving relationship between the environment and the organisation there is little to suggest how such studies should be executed in practice. Typically the choice is between the approaches of the historicised case study and statistical analysis of large populations which examine the relationship between environment and organisation strategy and/or structure and ignore the product-process relationship. This study combines the historicised case study and the multi-variable and ordinal scale approach of statistical analysis to construct an analytical framework which tracks and exposes the environment-organisation-performance relationship over time. The framework examines changes in the environment, strategy and structure and uniquely includes an assessment of the organisation's product-process relationship and its contribution to organisational efficiency and innovation. The analytical framework is applied to examine the evolving environment-organisation relationship of two organisations in the same industry over the same twenty-five year period to provide a sector perspective of organisational adaptation. The findings demonstrate the significance of the environment-organisation configuration to the scope and frequency of adaptation and suggest that the level of sector homogeneity may be linked to the level of product-process standardisation.

The dyslexia candidate locus on 2p12 is associated with general cognitive ability and white matter structure

Independent studies have shown that candidate genes for dyslexia and specific language impairment (SLI) impact upon reading/language-specific traits in the general population. To further explore the effect of disorder-associated genes on cognitive functions, we investigated whether they play a role in broader cognitive traits. We tested a panel of dyslexia and SLI genetic risk factors for association with two measures of general cognitive abilities, or IQ, (verbal and non-verbal) in the Avon Longitudinal Study of Parents and Children (ALSPAC) cohort (N>5,000). Only the MRPL19/C2ORF3 locus showed statistically significant association (minimum P = 0.00009) which was further supported by independent replications following analysis in four other cohorts. In addition, a fifth independent sample showed association between the MRPL19/C2ORF3 locus and white matter structure in the posterior part of the corpus callosum and cingulum, connecting large parts of the cortex in the parietal, occipital and temporal lobes. These findings suggest that this locus, originally identified as being associated with dyslexia, is likely to harbour genetic variants associated with general cognitive abilities by influencing white matter structure in localised neuronal regions.

The JNR Property and the Borel Structure of a Banach Space

Research partially supported by a grant of Caja de Ahorros del Mediterraneo.

Experimental nutrient enrichment causes complex changes in seagrass, microalgae, and macroalgae community structure in Florida Bay

We evaluated how changes in nutrient supply altered the composition of epiphytic and benthic microalgal communities in a Thalassia testudinum (turtle grass) bed in Florida Bay. We established study plots at four sites in the bay and added nitrogen (N) and phosphorus (P) to the sediments in a factorial design. After 18, 24, and 30 months of fertilization we measured the pigment concentrations in the epiphytic and benthic microalgal assemblages using high performance liquid chromatography. Overall, the epiphytic assemblage was P-limited in the eastern portion of the bay, but each phototrophic group displayed unique spatial and temporal responses to N and P addition. Epiphytic chlorophyll a, an indicator of total microalgal load, and epiphytic fucoxanthin, an indicator of diatoms, increased in response to P addition at one eastern bay site, decreased at another eastern bay site, and were not affected by P or N addition at two western bay sites. Epiphytic zeaxanthin, an indicator of the cyanobacteria/coralline red algae complex, and epiphytic chlorophyll b, an indicator of green algae, generally increased in response to P addition at both eastern bay sites but did not respond to P or N addition in the western bay. Benthic chlorophyll a, chlorophyll b, fucoxanthin, and zeaxanthin showed complex responses to N and P addition in the eastern bay, suggesting that the benthic assemblage is limited by both N and P. Benthic assemblages in the western bay were variable over time and displayed few responses to N or P addition. The contrasting nutrient limitation patterns between the epiphytic and benthic communities in the eastern bay suggest that altering nutrient input to the bay, as might occur during Everglades restoration, can shift microalgal community structure, which may subsequently alter food web support for upper trophic levels.

Patterns of Soil Bacteria and Canopy Community Structure Related to Tropical Peatland Development

Natural environmental gradients provide important information about the ecological constraints on plant and microbial community structure. In a tropical peatland of Panama, we investigated community structure (forest canopy and soil bacteria) and microbial community function (soil enzyme activities and respiration) along an ecosystem development gradient that coincided with a natural P gradient. Highly structured plant and bacterial communities that correlated with gradients in phosphorus status and soil organic matter content characterized the peatland. A secondary gradient in soil porewater NH4 described significant variance in soil microbial respiration and β-1-4-glucosidase activity. Covariation of canopy and soil bacteria taxa contributed to a better understanding of ecological classifications for biotic communities with applicability for tropical peatland ecosystems of Central America. Moreover, plants and soils, linked primarily through increasing P deficiency, influenced strong patterning of plant and bacterial community structure related to the development of this tropical peatland ecosystem.

New statin use and left ventricular structure: estimating long-term associations in the Multi-Ethnic Study of Atherosclerosis (MESA)

Thesis (Master's)--University of Washington, 2016-08

The effects of PVP(FE(III)) catalyst and polymer molecular weight on gene delivery via biodegradable crosslinked polyethylenimine

Human gene therapy has faced many setbacks due to the immunogenicity and oncogenity of viruses. Safe and efficient alternative gene delivery vehicles are needed to implement gene therapy in clinical practice. Polymeric vectors are an attractive option due to their availability, simple chemistry, and low toxicity and immunogenicity. Our group has previously reported biodegradable polyethylenimines (PEI) that show high transfection efficiency and low toxicity by cross-linking 800 Da PEI with diacrylate cross-linkers using Michael addition. However, the synthesis was difficult to control, inconsistent, and resulted in polymers with a narrow range of molecular weights. In the present work, we utilized a heterogenous PVP(Fe(III)) catalyst to provide a more controllable PEI crosslinking reaction and wider range of biodegradable PEIs. The biodegradable PEIs reported here have molecular weights ranging from 1.2 kDa to 48 kDa, are nontoxic in MDA-MB-231 cells, and show low toxicity in HeLa cells. At their respective optimal polymer:DNA ratios, these biodegradable PEIs demonstrated about 2-5-fold higher transfection efficiency and 2-7-fold higher cellular uptake, compared unmodified 25 kDa PEI. The biodegradable PEIs show similar DNA condensation properties as unmodified PEI but more readily unpackage DNA, based on ethidium bromide exclusion and heparan sulfate competitive displacement assays, which could contribute to their improved transfection efficiency. Overall, the synthesis reported here provides a more robust, controlled reaction to produce cross-linked biodegradable PEIs that show enhanced gene delivery, low toxicity, and high cellular uptake and can potentially be used for future in vivo studies.

Automatic dynamic mask extraction for PIV images containing an unsteady interface, bubbles, and a moving structure

When performing Particle Image Velocimetry (PIV) measurements in complex fluid flows with moving interfaces and a two-phase flow, it is necessary to develop a mask to remove non-physical measurements. This is the case when studying, for example, the complex bubble sweep-down phenomenon observed in oceanographic research vessels. Indeed, in such a configuration, the presence of an unsteady free surface, of a solid–liquid interface and of bubbles in the PIV frame, leads to generate numerous laser reflections and therefore spurious velocity vectors. In this note, an image masking process is developed to successively identify the boundaries of the ship and the free surface interface. As the presence of the solid hull surface induces laser reflections, the hull edge contours are simply detected in the first PIV frame and dynamically estimated for consecutive ones. As for the unsteady surface determination, a specific process is implemented like the following: i) the edge detection of the gradient magnitude in the PIV frame, ii) the extraction of the particles by filtering high-intensity large areas related to the bubbles and/or hull reflections, iii) the extraction of the rough region containing these particles and their reflections, iv) the removal of these reflections. The unsteady surface is finally obtained with a fifth-order polynomial interpolation. The resulted free surface is successfully validated from the Fourier analysis and by visualizing selected PIV images containing numerous spurious high intensity areas. This paper demonstrates how this data analysis process leads to PIV images database without reflections and an automatic detection of both the free surface and the rigid body. An application of this new mask is finally detailed, allowing a preliminary analysis of the hydrodynamic flow.

Elemental Anisotropic Growth and Atomic-Scale Structure of Shape-Controlled Octahedral Pt–Ni–Co Alloy Nanocatalysts

Multimetallic shape-controlled nanoparticles offer great opportunities to tune the activity, selectivity, and stability of electrocatalytic surface reactions. However, in many cases, our synthetic control over particle size, composition, and shape is limited requiring trial and error. Deeper atomic-scale insight in the particle formation process would enable more rational syntheses. Here we exemplify this using a family of trimetallic PtNiCo nanooctahedra obtained via a low-temperature, surfactant-free solvothermal synthesis. We analyze the competition between Ni and Co precursors under coreduction “one-step” conditions when the Ni reduction rates prevailed. To tune the Co reduction rate and final content, we develop a “two-step” route and track the evolution of the composition and morphology of the particles at the atomic scale. To achieve this, scanning transmission electron microscopy and energy dispersive X-ray elemental mapping techniques are used. We provide evidence of a heterogeneous element distribution caused by element-specific anisotropic growth and create octahedral nanoparticles with tailored atomic composition like Pt1.5M, PtM, and PtM1.5 (M = Ni + Co). These trimetallic electrocatalysts have been tested toward the oxygen reduction reaction (ORR), showing a greatly enhanced mass activity related to commercial Pt/C and less activity loss than binary PtNi and PtCo after 4000 potential cycles.