Increased spinal pain sensitization : a new explanation for highly prevalent painful somatic symptoms in major depressive disorder?

Objectifs: Malgré que les patients souffrant de dépression majeure (DM) rapportent souvent des symptômes douloureux, la relation entre la douleur et la dépression n’est pas encore claire. Ce n’est que récemment que des études employant des paradigmes de sommation temporelle ont pu offrir une explication préliminaire de la cooccurrence de la douleur et de la dépression. Notre étude vise à évaluer la contribution des procédés spinaux et surpraspinaux dans la sensibilisation de la douleur dans la DM en utilisant un paradigme de sommation temporelle. Participants : Treize sujets sains et quatorze patients souffrant de DM ont été inclues dans l’analyse finale. Méthodes : Pour induire une sommation temporelle, nous avons utilisé des stimulations intermittentes du nerf sural de basses et hautes fréquences. La sensibilisation spinale de la douleur a été quantifiée en mesurant la variation de l’amplitude du réflex de retrait nociceptif (NFR) entre les deux conditions de stimulations, ainsi que la sensibilisation supraspinale de la douleur a été obtenue en mesurant le changement dans l’appréciation verbale de la douleur entre ces deux conditions. Résultats : Nous avons observé une sensibilisation plus élevée de la réponse NFR chez les patients dépressifs durant la condition de stimulation à haute fréquence, un effet qui n’a pas été reflété par une sensibilisation amplifiée des appréciations subjectives de la douleur durant l’expérience. Néanmoins, nous avons observé une association entre la sensibilisation spinale et les symptômes somatiques douloureux chez les patients DM. Conclusion : Ces résultats suggèrent une sensibilisation spinale amplifiée dans la DM, ce qui pourrait expliquer la prévalence élevée des symptômes somatiques douloureux chez ces patients.

Perspective maternelle de la consultation anténatale pour travail préterme : une approche relationnelle

Une femme à risque d’un accouchement prématuré vit un enjeu de santé très éprouvant et stressant ; elle sera souvent hospitalisée pour recevoir des traitements médicaux visant à prolonger la grossesse et améliorer le pronostic du bébé. Dans ce contexte, une consultation avec un néonatalogiste est demandée. Plusieurs associations professionnelles médicales ont émis des lignes directrices sur cette consultation, insistant sur le besoin d’informer les parents au sujet des complications potentielles de la prématurité pour leur enfant. Ces recommandations s’inspirent du point de vue médical, et très peu d’études ont examiné la perspective, les attentes et les besoins des parents à risque d’un accouchement prématuré. Ce projet de thèse a pour objectif de proposer un modèle de relation médecin-patient informé de la perspective maternelle de la consultation anténatale, pour développer une approche clinique répondant à leurs besoins. Afin d’examiner cette problématique de façon complète, un travail constant de va-et-vient a été effectué entre la recension de données empiriques et une réflexion normative bioéthique féministe. Un projet de recherche empirique a d’abord permis d’explorer les attentes et le vécu de ces femmes. Les participantes espéraient recevoir plus que de l’information sur les complications de la prématurité. Elles souhaitaient que le néonatologiste soit attentif à leur situation particulière et qu’il développe une relation de confiance avec elles, leur permettant d’explorer leurs futurs rôles de mères et les encourageant à formuler leurs propres questions. Le cadre théorique féministe d’autonomie relationnelle a ensuite permis de proposer une approche de soin qui sache répondre aux besoins identifiés par les patientes, tout en adressant des enjeux de pouvoir intrinsèques à la clinique, qui influencent la santé et l’autonomie de ces femmes. Cette approche insiste sur l’importance de la relation de soin en clinique, contrastant avec un modèle encourageant une vision réductrice de l’autonomie, dans laquelle un simple transfert de données scientifiques serait équivalent au respect de la norme médicolégale du consentement éclairé. Ce modèle relationnel propose des actions concrètes et pratiques, encourageant les cliniciens à entrer en relation avec chaque patiente et à considérer l’influence qu’ils exercent sur l’autonomie relationnelle de leurs patientes.

Paroxysmal upgaze deviation: case report

The paroxysmal upgaze deviation is a syndrome that described in infants for first time in 1988; there are just about 50 case reports worldwide ever since. Its etiology is unclear and though it prognosis is variable; most case reports indicate that during growth the episodes tend to decrease in frequency and duration until they disappear. It describes a 16-months old male child who since 11-months old presented many episodes of variable conjugate upward deviation of the eyes, compensatory neck flexion and down-beat saccades in attempted downgaze. These events are predominantly diurnal, and are exacerbated by stressful situations such as fasting or insomnia, however and improve with sleep. They have normal neurologic and ophthalmologic examination, and neuroimaging and EEG findings are not relevant.

Evaluación comparativa de factores de preferencia uso de una herramienta de corte para floricultura con un nuevo diseño, versus la herramienta tradicional, estudio piloto

Colombia es uno de los principales productores de flores y rosas a nivel mundial y a través de los años ha presentado diversos problemas en la actividad industrial que permite la recolección de rosas. La cosecha y alistamiento del producto se realiza mediante actividades principalmente manuales. El corte de la rosa se efectúa con una herramienta conocida como tijera de poda manual, lo cual ha dado lugar a problemas ergonómicos al efectuar el corte, particularmente evidentes en personas de manos pequeñas, pues la apertura de operación excede la longitud máxima de extensión y capacidad de agarre de la mano, lo que conlleva a esfuerzos y posturas perjudiciales, especialmente desviaciones ulnares/radiales y flexión/extensión pronunciada de muñeca, permitiendo la aparición de lesiones por trauma acumulativo en el conjunto mano-muñeca. Este trabajo evalúa un nuevo diseño de tijera de poda manual concebida para disminuir el problema de posturas perjudiciales de la muñeca en el momento del corte. Se trata de un estudio cuasi-experimental, de observaciones pareadas, que permitió evaluar el nuevo diseño de tijera en condiciones reales de uso durante una fracción de la jornada de trabajo, donde los operarios la pudieron comparar con su tijera convencional y pudieron calificar las características de diseño de cada una de ellas a través de una escala de intervalo con rostros felices a tristes. Factores novedosos como el sistema de agarre con mango rotativo fueron bien aceptados en la nueva tijera, así como la suavidad en el accionamiento. El peso de la nueva herramienta es mayor a la actual y no fue bien aceptado. Personas de mayor edad y con mayor tiempo en el cargo muestran una preferencia hacia la tijera de poda que utilizan actualmente.

Pathomechanics of posterior ankle impingement syndrome in female ballet dancers

A dança é uma actividade de grande exigência atlética, que pode conduzir a um elevado número de lesões, particularmente na região do tornozelo, possivelmente devido à amplitude extrema do movimento articular de flexão plantar do mesmo, que os bailarinos, especialmente do sexo feminino possuem, para realizar a ponta e meia ponta tão características do ballet clássico (Kadel, 2006; Motta-Valencia, 2006; Russel, Kruse, Koutedakis, McEwan, Wyon, 2010). Estas posições de flexão plantar extrema produzem força excessiva na região posterior do tornozelo, o que muitas vezes pode resultar em conflito, dor e incapacidade, representando na maioria das vezes um desafio de diagnóstico. O síndrome do conflito posterior do tornozelo refere-se a um grupo de entidades patológicas que resultam da flexão plantar forçada do tornozelo, de forma repetitiva ou traumática, causando um conflito das estruturas ósseas e/ou de tecidos moles (Hamilton, Geppert, Thompson, 1996; Hamilton, 2008) . Os objectivos deste projecto são compreender os quais os factores de risco, mecânicos e funcionais que contribuem para a mecânica patológica da lesão descritos na literatura, e proceder a uma avaliação biomecânica do movimento de flexão plantar do tornozelo. Método. Realizar uma revisão sistemática de literatura dirigida á mecânica patológica do síndrome do conflito posterior do tornozelo em bailarinas e conduzir um estudo caso-controlo, cujo objectivo é avaliar, comparar e descrever o movimento da flexão plantar do tornozelo realizado ao efectuar os movimentos de ponta e meia-ponta, em bailarinas pré-profissionais com e sem lesão recorrente resultante do conflito posterior do tornozelo. Resultados. Não foram encontrados estudos relacionados especificamente com a mecânica patológica do tornozelo, no entanto vários estudos foram encontrados considerando as características clínicas e anatómicas assim como os procedimentos de tratamento, indicando que os principais factores de risco relacionados com a lesão se dividem em factores mecânicos e funcionais que quando combinados entre si e associados ao sobre-uso podem resultar no conflito posterior do tornozelo. Na avaliação do movimento foram observadas diferenças na actividade muscular entre os sujeitos com lesão e controlos, tendo sido possível a observação de um padrão na sequência de activação para um dos movimentos testados. Na oscilação postural e na rigidez do tornozelo foram também observadas diferenças entre os sujeitos bem como entre as posições realizadas. Conclusão. Concluiu-se que não sendo possível alterar a anatomia do bailarino, por vezes é possível intervir a nível funcional melhorando a capacidade técnica de forma obter um melhor desempenho e a actuar preventivamente em relação às lesões, uma vez que estas podem apresentar padrões cinéticos próprios, relacionados com a função muscular, a estabilidade postural e a rigidez articular.

The effect of the GENTLE/s robot-mediated therapy system on arm function after stroke

Objective: To evaluate the effect of robot-mediated therapy on arm dysfunction post stroke. Design: A series of single-case studies using a randomized multiple baseline design with ABC or ACB order. Subjects (n = 20) had a baseline length of 8, 9 or 10 data points. They continued measurement during the B - robot-mediated therapy and C - sling suspension phases. Setting: Physiotherapy department, teaching hospital. Subjects: Twenty subjects with varying degrees of motor and sensory deficit completed the study. Subjects attended three times a week, with each phase lasting three weeks. Interventions: In the robot-mediated therapy phase they practised three functional exercises with haptic and visual feedback from the system. In the sling suspension phase they practised three single-plane exercises. Each treatment phase was three weeks long. Main measures: The range of active shoulder flexion, the Fugl-Meyer motor assessment and the Motor Assessment Scale were measured at each visit. Results: Each subject had a varied response to the measurement and intervention phases. The rate of recovery was greater during the robot-mediated therapy phase than in the baseline phase for the majority of subjects. The rate of recovery during the robot-mediated therapy phase was also greater than that during the sling suspension phase for most subjects. Conclusion: The positive treatment effect for both groups suggests that robot-mediated therapy can have a treatment effect greater than the same duration of non-functional exercises. Further studies investigating the optimal duration of treatment in the form of a randomized controlled trial are warranted.

Marker placement to describe the wrist movements during activities of daily living in cyclical tasks

Objective. To describe the wrist kinematics during movement through free range of motion and activities of daily living using a cyclical task. Design. The wrist angles were initially calculated in a calibration trial and then in two selected activities of daily living (jar opening and carton pouring). Background. Existing studies which describe the wrist movement do not address the specific application of daily activities. Moreover, the data presented from subject to subject may differ simply because of the non-cyclical nature of the upper limbs movements. Methods. The coordinates of external markers attached to bone references on the forearm and dorsal side of the hand were obtained using an optical motion capture system. The wrist angles were derived from free motion trials and successively calculated in four healthy subjects for two specific cyclical daily activities (opening a jar and pouring from a carton). Results. The free motions trial highlighted the interaction between the wrist angles. Both the jar opening and the carton pouring activity showed a repetitive pattern for the three angles within the cycle length. In the jar-opening task, the standard deviation for the whole population was 10.8degrees for flexion-extension, 5.3degrees for radial-ulnar deviation and 10.4degrees for pronation-supination. In the carton-pouring task, the standard deviation for the whole population was 16.0degrees for flexion-extension, 3.4degrees for radial-ulnar deviation and 10.7degrees for pro nation-supination. Conclusion. Wrist kinematics in healthy subjects can be successfully described by the rotations about the axes of marker-defined coordinates systems during free range of motion and daily activities using cyclical tasks.

A feasible study of EEG-driven assistive robotic system for stroke rehabilitation

Stroke is a medical emergency and can cause a neurological damage, affecting the motor and sensory systems. Harnessing brain plasticity should make it possible to reconstruct the closed loop between the brain and the body, i.e., association of the generation of the motor command with the somatic sensory feedback might enhance motor recovery. In order to aid reconstruction of this loop with a robotic device it is necessary to assist the paretic side of the body at the right moment to achieve simultaneity between motor command and feedback signal to somatic sensory area in brain. To this end, we propose an integrated EEG-driven assistive robotic system for stroke rehabilitation. Depending on the level of motor recovery, it is important to provide adequate stimulation for upper limb motion. Thus, we propose an assist arm incorporating a Magnetic Levitation Joint that can generate a compliant motion due to its levitation and mechanical redundancy. This paper reports on a feasibility study carried out to verify the validity of the robot sensing and on EEG measurements conducted with healthy volunteers while performing a spontaneous arm flexion/extension movement. A characteristic feature was found in the temporal evolution of EEG signal in the single motion prior to executed motion which can aid in coordinating timing of the robotic arm assistance onset.

Epidural analgesia with morphine or buprenorphine in ponies with lipopolysaccharide (LPS)-induced carpal synovitis

This study evaluated the analgesia effects of the epidural administration of 0.1 mg/kg bodyweight (BW) of morphine or 5 mu g/kg BW of buprenorphine in ponies with radiocarpal joint synovitis. Six ponies were submitted to 3 epidural treatments: the control group (C) received 0.15 mL/kg BW of a 0.9% sodium chloride (NaCl) solution; group M was administered 0.1 mg/kg BW of morphine; and group B was administered 5 mu g/kg BW of buprenorphine, both diluted in 0.9% NaCl to a total volume of 0.15 mL/kg BW administered epidurally at 10 s/mL. The synovitis model was induced by injecting 0.5 ng of lipopolysaccharide (LPS) in the left or right radiocarpal joint. An epidural catheter was later introduced in the lumbosacral space and advanced up to the thoracolumbar level. The treatment started 6 h after synovitis induction. Lameness, maximum angle of carpal flexion, heart rate, systolic arterial pressure, respiratory rate, temperature, and intestinal motility were evaluated before LPS injection (baseline), 6 h after LPS injection (time 0), and 0.5, 1, 2, 4, 6, 8, 10, 12, 16, 20, and 24 h after treatments. Although the model of synovitis produced clear clinical signs of inflammation, the lameness scores in group C were different from the baseline for only up to 12 h. Both morphine and buprenorphine showed a reduction in the degree of lameness starting at 0.5 and 6 h, respectively. Reduced intestinal motility was observed at 0.5 h in group M and at 0.5 to 1 h in group B. Epidural morphine was a more effective analgesic that lasted for more than 12 h and without side effects. It was concluded that morphine would be a valuable analgesic option to alleviate joint pain in the thoracic limbs in ponies.

Mobius Sequence in a Girl and Arthrogryposis in her Half-Brother: Distinct Phenotypes Caused By Prenatal Injuries

Mobius sequence is a congenital facial and abducens nerve palsy, frequently associated to abnormalities of extremities. Arthrogryposis multiplex congenital is defined as a congenital fixation of multiple joints seldom of neurogenic origin. Both sequences must have a genetic origin, but usually are sporadic cases related to environmental factors such as drugs exposition and maternal trauma. A 5-year-old girl and a 1-year-old boy were born with Mobius sequence and arthrogryposis multiplex congenital, respectively. During pregnancies, the mother had vaginal bleeding at 7 weeks and used crack (free-based cocaine) in the first trimester, respectively. The girl also has equinovarus talipes and autistic behavior. The boy has arthrogryposis with flexion contractures of the feet and knees. A vascular disruption, due to hemorrhage and cocaine exposure, causing a transient ischemic insult to embryos in a critical period of development may be responsible for distinct phenotypes in these cases.

Effects of Low-Level Laser Therapy (LLLT) in the Development of Exercise-Induced Skeletal Muscle Fatigue and Changes in Biochemical Markers Related to Postexercise Recovery

STUDY DESIGN: Randomized crossover double-blinded placebo-controlled trial. OBJECTIVE: To investigate if low-level laser therapy (LLLT) can affect biceps muscle performance, fatigue development, and biochemical markers of postexercise recovery. BACKGROUND: Cell and animal studies have suggested that LLLT can reduce oxidative stress and inflammatory responses in muscle tissue. But it remains uncertain whether these findings can translate into humans in sport and exercise situations. METHODS: Nine healthy male volleyball players participated in the study. They received either active LLLT (cluster probe with 5 laser diodes; A = 810 nm; 200 mW power output; 30 seconds of irradiation, applied in 2 locations over the biceps of the nondominant arm; 60 J of total energy) or placebo LLLT using an identical cluster probe. The intervention or placebo were applied 3 minutes before the performance of exercise. All subjects performed voluntary elbow flexion repetitions with a workload of 75% of their maximal voluntary contraction force until exhaustion. RESULTS: Active LLLT increased the number of repetitions by 14.5% (mean +/- SD, 39.6 +/- 4.3 versus 34.6 +/- 5.6; P = .037) and the elapsed time before exhaustion by 8.0% (P = .034), when compared to the placebo treatment. The biochemical markers also indicated that recovery may be positively affected by LLLT, as indicated by postexercise blood lactate levels (P<.01), creatine kinase activity (P = .017), and C-reactive protein levels (P = .047), showing a faster recovery with LLLT application prior to the exercise. CONCLUSION: We conclude that pre-exercise irradiation of the biceps with an LLLT dose of 6 J per application location, applied in 2 locations, increased endurance for repeated elbow flexion against resistance and decreased postexercise levels of blood lactate, creatine kinase, and C-reactive protein. LEVEL OF EVIDENCE: Performance enhancement, level 1b. J Orthop Sports Phys Ther 2010;40(8):524-532. doi:10.2519/jospt.2010.3294

Effect of neuromuscular electrical stimulation and isotonic exercises in flexor and extensor muscles of knee of hemiplegic patients

Aim. To verify the muscular force and resistance to the movement of the flexor and extensor muscles of the knee of patients with spasticity after treatment with neuromuscular electrical stimulation (NMES) and isotonic exercises. Patients and methods. The patients this study were divided into group I (NMES) and group 2 (isotonic exercises). Their muscular torque and resistance to the movement of the flexor and extensor knee muscles were measured by the isokinetic dynamometer and the degree of spasticity by the modified Ashworth scale before and after ten sessions. Results. Alterations in the scores of the modified Ashworth scale were not observed. An increase in the flexor torque in group 1 (p = 0.041) and in group 2 (p = 0.001) was verified. In the passive mode, group 1 presented a reduction of resistance to the flexion movement (p = 0.026), while in group 2, a reduction of resistance to both the flexion (p = 0,029) and extension movements (p = 0.019) was verified. Conclusions. The two therapeutical resources had their efficiency proven only for the increase of the force of the flexor muscles. The resistance to movement, the isotonic exercises were more effective because they promoted a reduction in the resistance of the flexor and extensor knee muscles.

Differences in muscle activity during hand dexterity tasks between women with arthritis and a healthy reference group

Background. Impaired hand function is common in patients with arthritis and it affects performance of daily activities; thus, hand exercises are recommended. There is little information on the extent to which the disease affects activation of the flexor and extensor muscles during these hand-dexterity tasks. The purpose of this study was to compare muscle activation during such tasks in subjects with arthritis and in a healthy reference group. Methods. Muscle activation was measured in m. extensor digitorium communis (EDC) and in m. flexor carpi radialis (FCR) with surface electromyography (EMG) in women with rheumatoid arthritis (RA, n = 20), hand osteoarthritis (HOA, n = 16) and in a healthy reference group (n = 20) during the performance of four daily activity tasks and four hand exercises. Maximal voluntary isometric contraction (MVIC) was measured to enable intermuscular comparisons, and muscle activation is presented as %MVIC. Results. The arthritis group used a higher %MVIC than the reference group in both FCR and EDC when cutting with a pair of scissors, pulling up a zipper and—for the EDC—also when writing with a pen and using a key (p < 0.02). The exercise “rolling dough with flat hands” required the lowest %MVIC and may be less effective in improving muscle strength. Conclusions. Women with arthritis tend to use higher levels of muscle activation in daily tasks than healthy women, and wrist extensors and flexors appear to be equally affected. It is important that hand training programs reflect real-life situations and focus also on extensor strength.

Utilização de resíduo lignocelulósico na obtenção de chapa de madeira aglomerada homogênea e compósito reforçado com fibra de vidro-E

This research is about the use of the coconut´s endocarp (nucifera linn) and the waste of derivatives of wood and furniture as raw material to technological use. In that sense, the lignocellulosic waste is used for manufacture of homogeneous wood sheet agglomerate (LHWS) and lignocellulosic load which take part of a polymeric composite with fiber glass E (GFRP-WC). In the manufacturing of the homogeneous wood sheet agglomerate (LHWS), it was used mamona´s resin as waste s agglutinating element. The plates were taken up in a hydraulic press engine, heated, with temperature control, where they were manufactured for different percentage of waste wood and coconuts nucífera linn. Physical tests were conducted to determine the absorption of water, density, damp grade (in two hours and twenty-four hours), swelling thickness (in two hours and twenty-four hours), and mechanical tests to evaluate the parallel tensile strength (internal stick) and bending and the static (steady) flexural. The physical test´s results indicate that the LHWS can be classified as bonded wood plate of high-density and with highly water resistant. In the mechanical tests it was possible to establish that LHWS presents different characteristics when submitted to uniaxial tensile and to the static (steady) flexural, since brittle and elasticity module had a variation according to the amount of dry endocarp used to manufacture each trace of LHWS. The GFRP-WC was industrially manufactured by a hand-lay-up process where the fiber glass E was used as reinforcement the lignocellulósic´s waste as load. The matrix was made with ortofitalic unsaturated polyester resin. Physical and mechanical tests were performed in presence of saturated humidity and dry. The results indicated good performance of the GFRP-WC, as traction as in flexion in three points. The presence of water influenced the modules obtained in the flexural and tensile but there were no significant alteration in the properties analyzed. As for the fracture, the analysis showed that the effects are more harmful in the presence of damp, under the action of loading tested, but despite this, the fracture was well defined starting in the external parts and spreading to the internal regions when one when it reaches the hybrid load

Desenvolvimento de argamassa para restauração utilizando resíduo do polimento do porcelanato

The coatings mortars are essential elements of building structures because they execute an important role in protecting walls and are particularly exposed to aggressive action responsible for its degradation over time. The importance of wall coverings has been the subject of discussion and analysis in the conservation and rehabilitation of old buildings. Are sometimes removed and replaced with inappropriate solutions of constructive point of view or architecture. The most commonly used coatings on walls of old buildings is based on traditional hydraulic lime mortars. The present study aims at the formulation of new lime- based mortars and aerial fine aggregate, in order to contribute to a better field of conservation and restoration mortar coating of old buildings. Residue was used for polishing porcelain as fine aggregate, replacing the aggregate (sand), in percentages 05-30% by mass. We conducted a thorough evaluation of the mortar properties in fresh and hardened state by comparing the performance of the same with a reference mortar. The residue used was characterized as the density, bulk density, and particle size laser, scanning electron microscopy, X-ray diffraction and X-ray fluorescence. Formulations were produced 7, 6 with residue and one commonly used formulation, which served as a reference. In the formulations of lime mortars air (hydrated lime powder CH-I) has been adopted a stroke volume (1:3) with constant binder, was varied and the water / binder and aggregate and waste. For evaluation of mortars fresh, proceeded to consistency analysis, specific gravity, water retention and air content embedded. In the hardened state assays were performed in specific gravity, water retention, modulus of elasticity, tensile strength in bending, compressive strength, water absorption by capillary action, adhesion, tensile strength, resistance to shrinkage and salts by of crystallization trials with resources chloride solution, nitrate and sulfate all sodium in prismatic at 90 days of age, in addition to the micro structural analysis of mortars. Based on the results we can see that the mortar formulated with 10% content of waste and the reference free retraction feature more stable closer to neutrality. The composition of 10% was obtained better performance against the action of the salt crystallization. The mortar with 15% residue obtained better density, lower air content embedded and high capacity for water retention developing good workability. The replacement of 20% of waste generates a satisfactory utilization of resistance to compression, flexion and traction grip the base. And, finally, it can be seen that the mortar with 10, 15 and 20% residual show, in principle, good suitability as coatings, thus enabling a final result consistent with durability, workability and aesthetics developing therefore a material with better performance to repair or replace existing mortars in old buildings