Comportamento dinâmico não-linear em fenômenos de colheita de energia usando dispositivos baseados em materiais piezoelétricos em estruturas aporticadas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Propriedades estruturais e espectroscópicas de complexos de difenilfosfinatos dos sistemas ternários 'LA'-'CE'-'EU'/'LA'-CE'-'TB'

Pós-graduação em Química - IQ

Desenvolvimento, otimização e caracterização física de um novo sistema multi-sensores de Biosusceptometria de Corrente Alternada (BAC) para obtenção de imagens biomagnéticas

A novel AC Biosusceptometry (ACB) system with thirteen sensors it was implemented and characterized in vitro using magnetic phantoms. The system presenting coils in a coaxial arrangement with one pair of excitation coil outside and thirteen pairs of detection coils inside. A first-order gradiometric configuration was utilized for optimal detection of magnetic signals. Several physical parameters such as baseline, number of turns, excitation field and diameters were studied for improvement of the signal/noise ratio. This system exhibits an enhanced sensitivity and spatial resolution, due to the higher density of sensors/area. In the future those characteristics will turn possible to obtain images of magnetic marker or tracer in the gastrointestinal tract focusing on physiological and pharmaceutical studies. ACB emerged due to its interesting nature, noninvasiveness and low cost to investigate gastrointestinal parameters and this system can contribute for more accurate interpretation of biomedical signals and images

Estudo teórico da contribuição à dose de partículas secundárias geradas por prótons de energias entre 100 e 200 MeV num Phantom de substituto de tecido MS20

The goal of this project is the reproduction, through the simulation code based on the MCNPX (Monte Carlo N-Particle eXtended) v2.50 method, of the proton beam interaction with the material, since, in proton therapy, only the particle ionization and excitation are analyzed and the occurence of nuclear interactive inelastic process are not considered. This work will help the development of studies concerning the contribution to the total dosis of secondary particles generated by nuclear interaction in proton therapy. They are: alpha particles ( ), deuterium(2H), tritium (3H), neutron (n) and helium (3He). A MS20 tissue substitute phantom was used as the target and the energy of the proton beams was within an interest range of 100 to 200MeV. With the results obtained, it was possible to generate graphics which allows the analysis of the dosis deposition relation with and without nuclear interaction, the percentage of secondary particles deposited dosis, the radial dispersion of neutrons in the material, the secondary particles multiplicity, as well as the relation between the secondary particles spectrum with the próton generated spectrum

Quantificação da desintegração de comprimidos por fluxo ótico em seqüências de imagens de biosusceptometria AC

AC Biosusceptometry (ACB) is a low-cost biomagnetic tool that has been successfully applied on pharmaceutical research to evaluate performance of solid dosage forms. The aim of this work was to evaluate the Horn & Shunck method to access tablet disintegration. To evaluate the HS results was record on video a test with a objet moving in a rail with a constant velocity. The desintegration was recorded on video and ACB, which used have seven pairs of detection coils and a pair of excitation coils to mensure the magnetic ux variation. The signals were ampli ed and digitalized to create images, which were restored by Wiener lter, while the video images are converted to gray scale, both are normalized and binarized and had the optical ow estimation calculated by Horn & Schunck (HS) algorithm. All signals and images are processed and developed algorithm on Matlab. During the tests the ve tablets (500mg ferrite, 375mg excipients, compression 10 to 50 kN) were on a becker between of the ACB system and of the video system, and only touching the surface of the water. With all OF maps calculated was realized the sum of the resultants of each, to get a disintegration process resultant for each compression. Whit that was possible observed the disintegration behaves. For the compression force study the HS components of each sequence was sum, take mean and normalized for sequence's max modulo, therefore can be observed a high growing on less compression tablets. We can conclude the HS algorithm is viable to tablets disintegration data collection and whit that was possible to create a tablets disintegration analyzes protocol, which would be useful on desintegration kinetics study

Estudo fotodinâmico da clorofila a, azul de metileno e rosa bengala como agente inseticida contra Aedes aegypti

Photodynamic therapy, term introduced by von Tapeiner in 1900, can be defined as the administration of a non toxic drug, i.e., a dye, known as photosensitizer (FS), which subsequently will be illuminated with light of specific wavelength. PDT is based on the interaction among FS, oxygen and light, which through photochemical reactions cause cell death. The FS molecules must have a high probability to form the singlet state after the excitation, which can induce chemical changes in the neighborhood in two ways, called reactions type I and type II. The type II reaction is based on the exchange of energy to molecular oxygen, exciting it to its state of higher energy (singlet), which is highly reactive. The proposed mechanisms for cell death are linked to damage to the DNA, mitochondria and to the cytoplasmic membrane. Several pre‐clinical and clinical trials have been carried out and the PDT is already used in many countries for treatment mainly against certain types of cancer. The therapy also has been gaining strength in antimicrobial control, since the microorganisms have appeared increasingly resistant to current antibiotics. Another attempt to use the PDT is for the inactivation of macro‐organisms, such as micro‐crustaceans and mosquitoes. To this end I tested whether the photosensitizers methylene blue, rose Bengal and the chlorophyll a has insecticidal activity against the yellow fever and dengue vector mosquito, Aedes aegypti. Since these diseases have no effective treatments, its control is linked to the vector control, which has shown resistance to chemical pesticides used. Based on this, this work shows its importance, because it is a new type of mosquito control since all the photosensitizers used are low cost, do not generate toxic products at the concentrations used and showed good results in mortality. The best photosensitizer was rose Bengal... (Complete abstract click electronic access below)

Expressão de genes relacionados a cálcio e glutamato no hipocampo de pacientes com epilepsia do lobo temporal

A epilepsia do lobo temporal (ELT) é a principal forma de epilepsia, e a principal lesão desenvolvida por pacientes com ELT é a esclerose mesial temporal (EMT) apresentando perda neuronal, gliose e atrofia da região do hipocampo. Os íons cálcio são fundamentais para o funcionamento de inúmeras vias metabólicas em todos os níveis fisiológicos e desempenham papel fundamental nas respostas de despolarização neuronal. Foi comprovado que a ativação tanto de receptores ionotrópicos quanto metabotrópicos de glutamato promove o influxo anormal de Ca2+ para o meio intracelular, potencializando o efeito de excitação associado à EMT. O cálcio atua tanto como mensageiro celular secundário, quanto primário através da interação com um receptor específico na superfície celular, o Receptor Sensor de Cálcio (CASR). O CASR é expresso em diversas regiões do cérebro, incluindo o hipocampo, no entanto são desconhecidas muitas das possíveis funções desempenhadas por este receptor no cérebro. Ele pertence à família de receptores acoplados a proteína-G, e exibe homologia significativa com os receptores metabotrópicos de glutamato (mGluRs). Ademais, os mGluRs regulam a expressão da família de proteínas ligantes de cálcio neuronal, da qual faz parte a proteína VILIP-1, associada especificamente com o fenômeno da plasticidade sináptica no cérebro. O objetivo deste projeto foi determinar a expressão das proteínas CASR, mGluR1 e VILIP-1 em tecidos de hipocampo de pacientes com epilepsia do lobo temporal comparando com a expressão de tecidos de indivíduos normais. Os três genes encontraram-se subexpressos nos tecidos de pacientes com ELT, sendo que os tecidos dos pacientes, em grau crônico da doença, justificam tais graus de expressão. Sugere-se uma possível interação entre CASR e mGluR1 e...(Resumo completo, clicar acesso eletrônico abaixo)

Desenvolvimento de um sistema para caracterização de dispositivos eletroluminescentes

The materials designed to be used in electroluminescent (EL) devices construction are studied and improved since 1936. Great interests in the development of this kind of devices are mainly due to its low power consumption, flexibility, low cost and easy processing. One class of ELs devices with these characteristics are produced by employing a organic-polymeric/inorganic composite from a conductive polymer blend and an inorganic electroluminescent material (Zn2SiO4:Mn) dispersed in the polymeric matrix. This kind of device operates in d.c. or a.c. potentials, with EL of hundreds candela in the green region of the visible spectrum. However, few studies on the light emission were performed for these devices. In order to characterize devices made from composites, in this work is proposed a method of characterizing the electroluminescence associated with the impedance spectroscopy technique. To implement the technique of impedance spectroscopy was employ an experimental setup consisting of a source of a.c. voltage, an oscilloscope, and a reference resistor. Associated with this system, was use a photo diode and an analog electrometer to characterize the emitted light signal from the sample. The system was implemented allows characterization by impedance spectroscopy in the frequency range from 0.2 Hz up to 2 MHz and voltage amplitudes of 5 mV up to 20 kV. This system permits, at the same time, measurement of the RMS value of the luminance for devices in frequency range from 20 Hz up to 2 MHz. To test the system efficiency, an EL device was characterized showing analogous results to those reported in literature. By doing this, was demonstrated the efficiency of the system for electroluminescence characterization associated with the electrical characterization by impedance spectroscopy, for devices

Tratamento da superfície do alumínio via eletrólise a plasma

This paper presents the study on the application of the electrolytic plasma for surface treatment of aluminum. A bibliographical study on the material of interest was preliminarily performed and later designed and built an electrolytic cell, including the excitation source. Unlike conventional electrolysis process, the plasma assisted carry on in the non-linear region of characteristic current/voltage curve. Therefore it requires for the on set of the process that the power supply operates on harder conditions than those on high current process. The plasma produced during the present investigation has temperatures in the range o 6,0.10 3 -7,0 .10 3 K, well above those found in conventional chemical process. It also shows a particular dynamic to promote changes on surface and to produce new materials. The plasma is generated by microdischarge in vapor or gas bubbles involved in physic-chemical processes in electrode regions of the electrolytic cell. The electrode material was the aluminum (7075). The Process Electrolytic Plasma Processing (EPP) is sensitive to various parameters such as operating voltage, current density, electrolyte, concentration of electrolyte, geometry of reactor, temperature of electrolytic solution and dynamic of the fluid in the cell. The experiments were carried on in order to find parameters for a stable abd steady operation. The choice for the electrolytic was silicate/alkali solution in various concentrations to operate in various voltage as well. Plasma was produced on negative (cathode) and positive (anode) electrode, in specific conditions. A stable operation on the cathode process was obtained with low concentration of the electrolytic in aqueous solution, current density around 250V effective voltage. For the evolution of plasma in anodic process it was required higher concentrations and higher... (Complete abstract click electronic access below)

Estudo teórico da contribuição a dose de partículas secundárias geradas por prótons de energias entre 100-200 MeV num phantom de músculo estriado

In the treatment plans in conventional Proton therapy are considered only the elastic interactions of protons with electrons and/or nuclei, it means, mainly ionization and coulomb excitation processes. As the energy needed to reach the deep tumors should be of several hundred of MeVs, certainly the nuclear inelastic channels are open. Only some previous studies of the contribution of these processes in the full dose have been made towards targets composed of water. In this study will be presented the results of the simulation of the processes of interaction of beams of protons in the range of 100-200 MeV of energy with a cylindrical phantom composed by striated muscle (ICRU), emphasizing in the contribution to total dose due to the deposition of energy by secondary particles alpha (α), deuterium (2H), tritium (3H), neutron (n) and hélio3 (3He), originated by nuclear inelastic processes. The simulations were performed by using the method of Monte Carlo, via the computer code MCNPX v2.50 (Monte Carlo N-Particle eXtended). The results will be shown demonstrated through the graphics of the deposited dose with or without nuclear interaction, the percentual of dose deposited by secondary particles, the radial dispersion of neutrons, as well as the multiplicity of secondary particles

Estudo teórico da contribuição à dose de partículas secundárias geradas por Prótons de energias entre 100 e 200 MeV num Phantom de osso cortical

In proton therapy, the deposition of secondary particles energy originated by nuclear inelastic process (n, 2H, 3H, 3He and α) has a contribution in the total dose that deserves to be discussed. In calculations of plans implemented for routine treatment, the paid dose is calculated whereas the proton loses energy by ionization and or coulomb excitement. The contribution of inelastic processes associated with nuclear reactions is not considered. There are only estimates for pure materials or simple composition (water, for example), because of the difficulty of processing targets consisting of different materials. For this project, we use the Monte Carlo method employing the code MCNPX v2.50 (Monte Carlo N-Particle eXtended) to present results of the contribution to the total dose of secondary particles. In this work, it was implemented a cylindrical phantom composed by cortical bone, for proton beams between 100 and 200 MeV. With the results obtained, it was possible to generate graphics to analyze: the dose deposition relation with and without nuclear interaction, the multiplicity and percentage of deposited dose for each secondary particle and a radial dispersion of neutrons in the material

Aplicação da MTF e FWHM para análise de resolução espacial de sensores de Biossusceptometria AC

Neste trabalho foi analisada a resolução espacial de sensores de Biossusceptometria AC (BAC) correlacionando dois métodos consagrados em análise de resolução, a Função de Transferência Modulada (do inglês MTF) e a Largura à Meia Altura (FWHM) da Função de Espalhamento Pontual (PSF). A partir da aquisição da PSF do sistema, foi possível quantificar a resolução dos sensores pelos dois métodos. Foram analisados sensores de diferentes diâmetros para a obtenção da correlação entre os dois métodos. Foi variada também a corrente, indiretamente, pela variação de voltagem de excitação. Com estas metodologias foi possível avaliar a resolução de maneira pontual dos sensores, sendo possível otimizar a utilização dos sensores de acordo com a medida a ser realizada

Colheita de energia usando dispositivos baseados em materiais piezoelétrico

Recently, research on energy harvesting has increased substantially. Many researchers have concentrated their efforts to find the best configuration for these systems and to optimize their output power. In the process of energy harvesting, the electric energy is obtained by converting mechanics energy created by an environment vibration source by a transducer, for example, a thin piezoceramic film. That vibration source is, for example, a beam suffering some mechanic force able to generate a vibration in it, an oscillating beam is the best properly used example. Different mechanisms of electromechanical coupling have been developed to harvesting devices, and a particular interest has been given to the use of models that transform the mechanical vibration into electrical current using a piezoelectric element. In this paper we propose a model to energy harvesting from vibrations, from an oscillating beam, including non-linearities in the piezoelectric coupling and a non-ideal excitation in the material. From this model, it was developed a system to obtain some results about the harvested power by the material. It was demonstrated that the power captured was influenced by the effect of the nonlinearities of the piezoelectric coupling, modifying the system dynamic behavior

Desenvolvimento de um código computacional para simulação e análise de espectros atômicos

The aim of this work was the development a computer code for simulation and analysis of atomic spectra from databases constructed from the literature. There were created four routines that can be useful for spectroscopic studies in the atomic processes of laser isotope separation. In the first routine, Possible Transitions, the program checks the possible electron transitions from an energy level of the atom present in the database considering the selection rules for an electric dipole transition. The second routine, Locator Transitions, checks the possible electronic transitions within a user-specified spectral region. The routine Spectra Simulator creates simulated spectra using the graphical application gnuplot through lorentzian curve and finally, the routine Electronic Temperature determines the temperature of electronic excitation of the atom, thought the Boltzmann Plot Method. To test the reliability of the program there were obtained experimental emission spectra of a hollow cathode discharge of dysprosium and argon as a buffer gas. The hollow cathode discharge has been subjected to different values of operating currents and pressure of inert gas. The spectra obtained were treated with the assistance of program routines developed (Transition Locator and Spectra Simulator) and temperatures electronic excitation of the atoms of dysprosium in the different discharge conditions were calculated (routine Electronic Temperature). The results showed that the electronic excitation temperature of the neutral dysprosium atoms in the hollow cathode discharge increases with increasing current applied to the cathode and also by increasing the gas pressure buffer. The determination coefficients, R2, obtained by the Electronic Temperature routine using the linear adjust of the Boltzmann Plot Method were greater... (Complete abstract click electronic access below)

Análise da viabilidade de simulações com feixes de prótons de 100, 150, 200 e 250 MeV em alvos heterogêneos

In the recent years, the use of proton beams in radiotherapy has been an outstanding progress (SMITH, 2006). Up to now, computed tomography (CT) is a prerequisite for treatment planning in this kind of therapy because it provides the electron density distribution required for calculation of dose and the interval of doses. However, the use of CT images for proton treatment planning ignores fundamental differences in physical interaction processes between photons and protons and is, therefore, potentially inaccurate (SADROZINSKI, 2004). Proton CT (pCT) can in principle directly measure the density distribution needed in a patient for the dose distribution (SCHULTE, et al, 2004). One important problem that should be solved is the implementation of image reconstruction algorithms. In this sense, it is necessary to know how the presence of materials with different density and composition interfere in the energy deposition by ionization and coulomb excitation, during its trajectory. The study was conducted in two stages, was used in both the program SRIM (The Stopping and Range of Ions in Matter) to perform simulations of the interaction of proton beams with pencil beam type. In the first step we used the energies in the range of 100-250 MeV (ZIEGLER, 1999). The targets were set to 50 mm in length for the beam of 100 MeV, due to its interaction with the target, and short-range, and 70 mm for 150, 200 and 250 MeV The target was composed of liquid water and a layer of 6 mm cortical bone (ICRP). It were made 9 simulations varying the position of the heterogeneity of 5 mm. In the second step the energy of 250 MeV was taken out from the simulations, due to its greater energy and less interaction. The targets were diminished to 50 mm thick to standardize the simulations. The layer of bone was divided into two equal parts and both were put in the ends of the target... (Complete abstract click electronic access below)