Masonry components

Masonry is a non-homogeneous material, composed of units and mortar, which can be of different types, with distinct mechanical properties. The design of both masonry units and mortar is based on the role of the walls in the building. Load-bearing walls relate to structural elements that bear mainly vertical loads, but can serve also to resist to horizontal loads. When a structural masonry building is submitted to in-plane and out-of-plane loadings induced by an earthquake for example, the masonry walls are the structural elements that ensure the global stability of the building. This means that the walls should have adequate mechanical properties that enable them to resist to different combinations of compressive, shear and tensile stresses.The boundary conditions influence the resisting mechanisms of the structural walls under in-plane loading and in a buildings the connection at the intersection walls are of paramount importance for the out-of-plane resisting mechanism. However, it is well established that the masonry mechanical properties are also relevant for the global mechanical performance of the structural masonry walls. Masonry units for load-bearing walls are usually laid so that their perforations are vertically oriented, whereas for partition walls, brick units with horizontal perforation are mostly adopted.

Effects of forest structure components on the occurence, group size and density of groups of bare-face tamarin (Saguinus bicolor - primates: Callitrichinae) in Central Amazonia

This study analyzed the influence of forest structural components on the occurence, size and density of groups of Bare-face Tamarin (Saguinus bicolor) - the most threatened species in the Amazon - and produced the first map of distribution of groups in large-scale spatial within the area of continuous forest. Population censuses were conducted between November 2002 and July 2003, covering 6400 hectares in the Ducke Reserve, Manaus-AM, Brazil. Groups of S. bicolor were recorded 41 times accordingly distributed in the environments: plateau (20); slopes (12); and lowlands (09). The mean group size was 4.8 indiv./group, and ranged from 2 to 11 individuals. In the sites where the groups were recorded, and in an equivalent number of sites where no tamarins were found located at least 500 m from those where they had been recorded, we placed 50 m x 50 m plots to record the following forest structural components: abundance of trees; abundance of lianas; abundance of fruiting trees and lianas; abundance of snags; abundance of logs; percentage of canopy opening; leaf litter depth; and altitude. Bare-face Tamarin more often uses areas with lower abundance of forest logs, smaller canopy opening and with higher abundance of snags, areas in the forest with smaller canopy opening present higher density of S. bicolor groups. Apparently this species does not use the forest in a random way, and may select areas for its daily activities depending on the micro-environmental heterogeneity produced by the forest structural components.

Numerical modeling and assessment of the thermal environment in an industrial premise of automotive components

Dissertação de mestrado em Engenharia Industrial

Development of high specific strength components, with internal cellular structure, for several applications

Dissertação de mestrado em Engenharia Mecânica

Politically driven cycles in fiscal policy: in depth analysis of the functional components of government expenditures

NIPE - WP 02/2016

Grasses and legumes as cover crop in no-tillage system in northeastern Pará Brazil

Studies to select one or more species of coverage plants adapted to Amazonian soil and climate conditions of the Amazon are a promising strategy for the improvement of environmental quality, establishing no-till agricultural systems, and thereby reducing the impacts of monoculture farming. The aim of this study was to assess the persistence time, half-life time, macronutrient content and accumulation, and C:N ratio of straw coverage in a Ultisol in northeastern Pará. Experimental design was randomized blocks with five treatments and five replicates. Plants were harvested after 105 days, growth and biomass production was quantified. After 84 days, soil coverage was 97, 85, 52, 50, and 15% for signalgrass (Brachiaria brizantha) (syn. Urochloa), dense crowngrass (Panicum purpurascens), jack bean (Canavalia ensiformes), pearl millet (Pennisetum americanum) and sunn hemp (Crotalaria juncea,), respectively. Signalgrass yielded the greatest dry matter production (9,696 kg ha-1). It also had high C:N ratio (38.4), long half-life (86.5 days) and a high persistence in the field. Jack bean also showed high dry matter production (8,950 kg ha-1), but it had low C:N ratio (17.4) and lower half-life time (39 days) than the grasses. These attributes indicate that signalgrass and jack bean have a high potential for use as cover plants in no-till agricultural systems in the State of Pará.

Analysis of physicochemical interaction between the components of asphalt mixtures with rubber

Tese de Doutoramento em Engenharia Civil

Inducción sistémica de la biosintesis de metabolitos secundarios en plantas aromáticas mediada por rizobacterias. Systemic induction of secondary metablolites biosynthesis in aromatic plants by rhizobacteria.

El uso de microorganismos como inoculantes para incrementar la disponibilidad y toma de nutrientes por parte de los cultivos, es una nueva tecnología que ha dado buenos resultados, observándose un incremento en la emergencia, vigor, mayor desarrollo en la parte aérea y de raíces, registrándose aumentos considerables de los rendimientos en cultivos de interés comercial. Esto es debido a que los microorganismos PGPR (Plant Growth promoting rhizobacteria) sintetizan ciertas sustancias reguladoras del crecimiento como giberelinas, citoquininas y auxinas; las cuales estimulan la densidad y longitud de los pelos radicales, aumentando así la cantidad y longitud de las raíces de los vegetales. Así, se incrementa la capacidad de absorción de agua y nutrientes, haciendo que las plantas sean más vigorosas, productivas y tolerantes a condiciones climáticas adversas, como sequías o heladas. Otro factor benéfico es que ciertos microorganismos solubilizan nutrientes poco móviles en el suelo como el caso del fósforo, segundo nutriente, después del nitrógeno en importancia para el crecimiento de los cultivos. Estos microorganismos también tienen una función muy importante en el control natural de agentes patógenos, a través de la inducción del sistema de defensa en las plantas, aumentando su resistencia a enfermedades, a través de la producción de compuestos bacterianos como antibióticos y sideróforos. Los variados mecanismos mediante los cuales la acción PGPR se lleva a cabo no son plenamente conocidos y, por lo tanto, es necesario determinar con precisión su efecto particular en la biología de la planta beneficiada. Las plantas aromáticas y medicinales inoculadas con microorganismos (rizobacterias) registran un incremento en varios parámetros de crecimiento vegetal (peso fresco parte aérea, peso seco de raíz, número de hojas, etc) y en el rendimiento de aceite esencial (AE). El aumento de la síntesis, y la variación de los porcentajes relativos de los componentes principales de AE en plantas aromáticas, como efecto de la inoculación, podría considerarse como una respuesta defensiva de la planta frente a la colonización de microorganismos dado que varios AE poseen propiedades antimicrobianas. El incremento de estos metabolitos también se ha registrado como respuesta frente a la herbivoría. En el presente proyecto se propone dilucidar la existencia de una relación entre las defensas inducidas por rizobacterias con la producción de metabolitos secundarios en plantas aromaticas y medicinales. The use of microorganisms as inoculants to increase the availability and nutrient uptake by crops, is a new technology that has been successfully applied, with an increase in the emergence, vigor, greater development in the shoot and roots, recording significant increases in yields of crop with commercial interest. This is because microorganisms PGPR (Plant Growth Promoting rhizobacteria) synthesize certain growth regulating substances such as gibberellins, cytokinins and auxins, which stimulate the density and length of root hairs, increasing the number and length of roots. Thus, increase the capacity of absorbing water and nutrients, make the plants more vigorous, productive and tolerant to adverse climatic conditions such as drought or frost.Another beneficial factor is that some microorganisms solubilize nutrients mobile in the soil as the case of phosphorus, second nutrient after nitrogen important for plant growth. These organisms also have an important role in the natural control of pathogens through the induction of the plants defense system, increasing their resistance to disease through the production of compounds such as antibiotics and bacterial siderophores. The various mechanisms by which PGPR action takes place are not fully known and therefore it is necessary to accurately determine its particular effect on the biology of the specific plant benefit. Aromatic and medicinal plants inoculated with microorganisms (rhizobacteria) recorded an increase in several parameters of plant growth (shoot fresh weight, root dry weight, leaf number, etc) and essential oil yield (AE). The increase in the biosynthesis, and changes in the relative percentages of the main components of AE in aromatic plants inoculated with rizobacterias, could be regarded as a plant defense response against microbial colonization, since several AE have antimicrobial properties. The increase of these metabolites have also been recorded as a response to herbivory.

Document-oriented e-learning components

Magdeburg, Univ., Fak. für Informatik, Diss., 2009

Basic components of cortical processing are shared in visual and auditory modality

Magdeburg, Univ., Fak. für Naturwiss., Diss., 2009

Effect of day time on foliar spraying of several levels of nitrogen fertilizer, NPKS solutions and its components, on common bean leaves

An experiment was carried out in order to determine the effect of day time of foliar spraying of several levels of nitrogen fertilizers, N-P-K-S station, and its components on common bean leaves. Results, based on the visual observations, indicated the maximum levels of each fertilizer that did not cause injuries and showed that the foliar spraying early in the morning is the best day time.

Recent brazilian experience on farmer reaction and crop response to fertilizer use

(1) In the period 1965/77 fertilizer consumption in Brazil increased nearly fifteen foild from circa 200,000 tons of N + P2O5 + K2O to 3 million tons. During the fifteen years extending from 1950 to 1964 usage of the primary macronutrients was raised by a factor of 2 only. (2) Several explanations are given for the remarkable increase, namely: an experimental background which supplied data for recommendations of rates, time and type of application; a convenient governmental policy for minimum prices and rural credit; capacity of the industry to meet the demand of the fertilizer market; an adequate mechanism for the diffusion of the practice of fertilizer use to the farmer. (3) The extension work, which has caused a permanent change in the aptitude towards fertilization, was carried out in the traditional way by salesmen supported by a technical staff, as well as by agronomists of the official services. (4) Two new programs were started and conducted in a rather short time, both putting emphasis on the relatively new technology of fertilizer use. (5) The first program, conducted in the Southern part of the country, extended lab and green house work supplemented by a few field trials to small land owners - the so called "operação tatú" (operation armadillo). (6) The seconde program, covering a larger problem area in the Northeast and in Central Brazil, began directly in field as thousands of demonstrations and simple experiments with the participation of local people whose involvement was essential for the success of the initiative; in this case the official extension services, both foreign and national sources of funds, and universities did participate under the leadership of the Brazilian Association for the Diffusion of Fertilizers (ANDA). (7) It is felt that the Brazilian experience gained thereof could be useful to other countries under similar conditions.

Effects of population density on cauliflower crop (Brassica oleracea L. var. botrytis)

An experiment was carried out to study the effects of the following population densities cauliflowers (plants per ha): 20,833 (0.60 m x 0.80 m), 25,641 (0.60 m x 0.65 m), ....37.037 (0.60 m x 0.45 m) , 55.555 (.0.60 m x 0.30 m), and 111,111 (0,60 m x 0,15 m) ; variety Snow ball. It was concluded that the effects of plant population density are greater on curd quality (weight and size) than on production per ha. The best plant population density to produce cauliflowers curd for Brazil market is from 20,000 to 25,000 plants/ha while for mini-curd is above 55,000 plants/ha.

Doses and methods of distribution of potassium chloride on soybean crop (Glycine max (L.) Merrill) in a red latosol, affecting soil salinity, grain production and chemical composition of leaves

The present work deal t wi th an experiment under field conditions and a laboratory test of soil incubation the objectives were as follows: a. to study effects on soybean grain product ion and leaf composition of increasing doses of potassium chloride applied into the soil through two methods of distribution; b. to observe chemical modifications in the soils incubated with increasing doses of potassium chloride; and, c. to correlate field effects with chemical alterations observed in the incubation test, The field experiment was carried out in a Red Latosol (Haplustox) with soybean cultivar UFV - 1. Potassium chloride was distributed through two methods: banded (5 cm below and 5 cm aside of the seed line) and broadcasted and plowed-down. Doses used were: 0; 50; 100 and 200 kg/ha of K2O. Foliar samples were taken at flowering stage. Incubation test were made in plastic bags with 2 kg of air dried fine soil, taken from the arable layer of the field experiment, with the following doses of KC1 p,a. : 0; 50; 100; 200; 400; 800; 1,600; 3.200; 6,400 and 12,800 kg/ha of K(2)0. In the conditions observed during the present work, results allowed the following conclusions: A response by soybean grain production for doses of potassium chloride, applied in both ways, banded or broadcasted, was not observed. Leaf analysis did not show treatment influence over the leaf contents for N, P, K, Ca, Mg, and CI, Potassium chloride salinity effects in both methods of distribution for all the tested closes were not observed.

Effects of planting density on flower production in carnation crop

The influence of density of planting on flower production of carnation plants grown in vinil houses, was studied. Planting densities of 233,333; 175,000 and 116,667 plants per hectare were obtained by using planting spacings of 0.20 m between rows and 0.15 m, 0,20 m and 0.30 m between plants. Data were taken on total number of flowers per plant and per hectare. As far as planting densities are concerned, there was an increase of total flower production per hectare and a decrease of slower production per plant.