Insurance and safety after September 11, 2001: Coming to grips with the costs and threats of terrorism

This chapter, originally written as a consequence of the terrorist attacksof September 11, 2001, provides an elementary, everyday introduction tothe concepts of risk and insurance. Conceptually, risk has two dimensions:a potential loss, and the chance of that loss being realized. People can,however, transfer risk to insurance companies against the payment ofso-called premiums. In practice, however, one needs accurate assessmentsof both losses and probabilities to judge whether premiums are appropriate.For many risks, this poses little problem (e.g., life insurance); however,it is difficult to assess risks of many other kinds of events such as actsof terrorism. It is emphasized, that through evolution and learning, peopleare able to handle many of the common risks that they face in life. Butwhen people lack experience (e.g., new technologies, threats of terrorism),risk can only be assessed through imagination. Not surprisingly, insurancecompanies demand high prices when risks are poorly understood. In particular,the cost of insurance against possible acts of terrorism soared afterSeptember 11. How should people approach risk after the events of that day?Clearly, the world needs to protect itself from the acts of terrorists andother disturbed individuals. However, it is also important to address the root causes of such antisocial movements. It is, therefore, suggested thatprograms addressed at combatting ignorance, prejudice, and socialinequalities may be more effective premiums for reducing the risk ofterrosrtism than has been recognized to date.

Governor's Task Force on Efficiencies and Cost-Effectiveness in Iowa State Government,Final Report, December 1983

A special task force was formed and worked through its various committees to uncover and investigate possible areas for cutting costs and saving money in State Government operations. A total of 81 recommendations are made in this report, with potential savings of over $32 million during the next several years.

An approach to costs and energy consumption in private urban Spanish Mediterranean landscapes from a simplified model in sprinkle irrigation

The number of private gardens has increased in recent years, creating a more pleasant urban model, but not without having an environmental impact, including increased energy consumption, which is the focus of this study. The estimation of costs and energy consumption for the generic typology of private urban gardens is based on two simplifying assumptions: square geometry with surface areas from 25 to 500 m2 and hydraulic design with a single pipe. In total, eight sprinkler models have been considered, along with their possible working pressures, and 31 pumping units grouped into 5 series that adequately cover the range of required flow rates and pressures, resultin in 495 hydraulic designs repeated for two climatically different locations in the Spanish Mediterranean area (Girona and Elche). Mean total irrigation costs for the locality with lower water needs (Girona) and greater needs (Elche) were € 2,974 ha-¹ yr-¹ and € 3,383 ha-¹ yr-¹, respectively. Energy costs accounted for 11.4% of the total cost for the first location, and 23.0% for the second. While a suitable choice of the hydraulic elements of the setup is essential, as it may provide average energy savings of 77%, due to the low energy cost in relation to the cost of installation, the potential energy savings do not constitute a significant incentive for the irrigation system design. The low efficiency of the pumping units used in this type of garden is the biggest obstacle and constraint to achieving a high quality energy solution

Rate, type, and cost of adverse drug reactions in emergency department admissions.

Background: Adverse drug reactions (ADRs) are a threat to patients' health and quality of life, and can generate significant expenses. They are generally underreported, with different rates in different health care systems. Methods: We conducted a 6-month survey of all primary admissions to the medical emergency department of a university hospital and assessed the rate, characteristics, avoidability, and marginal costs of ADRs. Results: A total of 7% of all admissions were mainly caused by ADRs. The most frequent were gastrointestinal bleeding (22.3%) and febrile neutropenia (14.4%). Anticancer drugs were involved in 22.7% of the cases, and anticoagulants, analgesics, and non-steroidal anti-inflammatory drugs in 8% each. Physicians had prescribed 70% of these drugs. Patients were predominantly treated in intermediate care units and ordinary wards. The mean cost per case amounted to CHF 3586+/-342, or a total of CHF 821204 over the 6-month-period (1 CHF=0.56 US$=0.87 Euro). A total of 67% were considered definitely imputable to drug effects and 32% were retrospectively regarded as avoidable. Conclusions: Interventions aimed at reducing the incidence of ADRs should be directed towards both patient education and physician training. This could save hospitals admissions and money, and could be used as an indicator of prescription quality.

Cost effectiveness and cost utility of risedronate for osteoporosis treatment and fracture prevention in women: a Swiss perspective.

OBJECTIVES: To assess the incremental cost-effectiveness ratio (ICER) and incremental cost-utility ratio (ICUR) of risedronate compared to no intervention in postmenopausal osteoporotic women in a Swiss perspective. METHODS: A previously validated Markov model was populated with epidemiological and cost data specific to Switzerland and published utility values, and run on a population of 1,000 women of 70 years with established osteoporosis and previous vertebral fracture, treated over 5 years with risedronate 35 mg weekly or no intervention (base case), and five cohorts (according to age at therapy start) with eight risk factor distributions and three lengths of residual effects. RESULTS: In the base case population, the ICER of averting a hip fracture and the ICUR per quality-adjusted life year gained were both dominant. In the presence of a previous vertebral fracture, the ICUR was below euro45,000 (pound30,000) in all the scenarios. For all osteoporotic women>or=70 years of age with at least one risk factor, the ICUR was below euro45,000 or the intervention may even be cost saving. Age at the start of therapy and the fracture risk profile had a significant impact on results. CONCLUSION: Assuming a 2-year residual effect, that ICUR of risedronate in women with postmenopausal osteoporosis is below accepted thresholds from the age of 65 and even cost saving above the age of 70 with at least one risk factor.

Bacterial bioassay for rapid and accurate analysis of arsenic in highly variable groundwater samples.

In this study, we report the first ever large-scale environmental validation of a microbial reporter-based test to measure arsenic concentrations in natural water resources. A bioluminescence-producing arsenic-inducible bacterium based on Escherichia coli was used as the reporter organism. Specific protocols were developed with the goal to avoid the negative influence of iron in groundwater on arsenic availability to the bioreporter cells. A total of 194 groundwater samples were collected in the Red River and Mekong River Delta regions of Vietnam and were analyzed both by atomic absorption spectroscopy (AAS) and by the arsenic bioreporter protocol. The bacterial cells performed well at and above arsenic concentrations in groundwater of 7 microg/L, with an almost linearly proportional increase of the bioluminescence signal between 10 and 100 microg As/L (r2 = 0.997). Comparisons between AAS and arsenic bioreporter determinations gave an overall average of 8.0% false negative and 2.4% false positive identifications for the bioreporter prediction at the WHO recommended acceptable arsenic concentration of 10 microg/L, which is far betterthan the performance of chemical field test kits. Because of the ease of the measurement protocol and the low application cost, the microbiological arsenic test has a great potential in large screening campaigns in Asia and in other areas suffering from arsenic pollution in groundwater resources.

Cost-effectiveness of temozolomide for the treatment of newly diagnosed glioblastoma multiforme.

AIM: To perform a systematic review on the costs and cost-effectiveness of concomitant and adjuvant temozolomide with radiotherapy for the treatment of newly diagnosed glioblastoma compared with initial radiotherapy alone. METHODS: Electronic databases were searched for relevant publications on costs and cost-effectiveness until October 2008. RESULTS: We found four relevant clinical trials, one cost study and two economic models. The mean survival benefit in the radiotherapy plus temozolomide group varied between 0.21 and 0.25 life-years. Treatment costs were between 27,365 euros and 39,092 euros. The costs of temozolomide amounted to approximately 40% of the total treatment costs. The incremental cost-effectiveness ratios found in the literature were 37,361 euros per life-year gained and 42,912 euros per quality-adjusted life-year gained. However, the models are not comparable because different outcomes are used (i.e., life-years and quality-adjusted life-years). CONCLUSION: Although the models are not comparable according to outcome, the incremental cost-effectiveness ratios found are within acceptable ranges. We concluded that despite the high temozolomide acquisition costs, the costs per life-year gained and the costs per quality-adjusted life-year gained are comparable with other accepted first-line treatments with chemotherapy in patients with cancer.

Integrating life cycle costs and environmental impacts of composite rail car-bodies for a Korean train

Background, aim, and scope A coupled Life Cycle Costing and life cycle assessment has been performed for car-bodies of the Korean Tilting Train eXpress (TTX) project using European and Korean databases, with the objective of assessing environmental and cost performance to aid materials and process selection. More specifically, the potential of polymer composite car-body structures for the Korean Tilting Train eXpress (TTX) has been investigated. Materials and methods This assessment includes the cost of both carriage manufacturing and use phases, coupled with the life cycle environmental impacts of all stages from raw material production, through carriage manufacture and use, to end-of-life scenarios. Metallic carriages were compared with two composite options: hybrid steel-composite and full-composite carriages. The total planned production for this regional Korean train was 440 cars, with an annual production volume of 80 cars. Results and discussion The coupled analyses were used to generate plots of cost versus energy consumption and environmental impacts. The results show that the raw material and manufacturing phase costs are approximately half of the total life cycle costs, whilst their environmental impact is relatively insignificant (3-8%). The use phase of the car-body has the largest environmental impact for all scenarios, with near negligible contributions from the other phases. Since steel rail carriages weigh more (27-51%), the use phase cost is correspondingly higher, resulting in both the greatest environmental impact and the highest life cycle cost. Compared to the steel scenario, the hybrid composite variant has a lower life cycle cost (16%) and a lower environmental impact (26%). Though the full composite rail carriage may have the highest manufacturing cost, it results in the lowest total life cycle costs and lowest environmental impacts. Conclusions and recommendations This coupled cost and life cycle assessment showed that the full composite variant was the optimum solution. This case study showed that coupling of technical cost models with life cycle assessment offers an efficient route to accurately evaluate economic and environmental performance in a consistent way.

Computational and Experimental Analysis of Flow Field in the Diffusers of Centrifugal Compressors

Centrifugal compressors are widely used for example in process industry, oil and gas industry, in small gas turbines and turbochargers. In order to achieve lower consumption of energy and operation costs the efficiency of the compressor needs to be improve. In the present work different pinches and low solidity vaned diffusers were utilized in order to improve the efficiency of a medium size centrifugal compressor. In this study, pinch means the decrement of the diffuser flow passage height. First different geometries were analyzed using computational fluid dynamics. The flow solver Finflo was used to solve the flow field. Finflo is a Navier-Stokes solver. The solver is capable to solve compressible, incompressible, steady and unsteady flow fields. Chien's k-e turbulence model was used. One of the numerically investigated pinched diffuser and one low solidity vaned diffuser were studied experimentally. The overall performance of the compressor and the static pressure distribution before and after the diffuser were measured. The flow entering and leaving the diffuser was measured using a three-hole Cobra-probe and Kiel-probes. The pinch and the low solidity vaned diffuser increased the efficiency of the compressor. Highest isentropic efficiency increment obtained was 3\% of the design isentropic efficiency of the original geometry. It was noticed in the numerical results that the pinch made to the hub and the shroud wall was most beneficial to the operation of the compressor. Also the pinch made to the hub was better than the pinchmade to the shroud. The pinch did not affect the operation range of the compressor, but the low solidity vaned diffuser slightly decreased the operation range.The unsteady phenomena in the vaneless diffuser were studied experimentally andnumerically. The unsteady static pressure was measured at the diffuser inlet and outlet, and time-accurate numerical simulation was conducted. The unsteady static pressure showed that most of the pressure variations lay at the passing frequency of every second blade. The pressure variations did not vanish in the diffuser and were visible at the diffuser outlet. However, the amplitude of the pressure variations decreased in the diffuser. The time-accurate calculations showed quite a good agreement with the measured data. Agreement was very good at the design operation point, even though the computational grid was not dense enough inthe volute and in the exit cone. The time-accurate calculation over-predicted the amplitude of the pressure variations at high flow.

Finding the Fit Between Engineering Design and Cost Information

This paper analyzes the possibilities of integrating cost information and engineering design. Special emphasis is put on finding the potential of using the activity-based costing (ABC) method. Today, the problem of cost estimation in engineering design is that there are two separate extremes of knowledge. On the one extreme, the engineers model the technical parametres behindcosts in great detail but do not get appropriate cost information to their elegant models. On the other extreme, the accounting professionals are stuck with traditional cost accounting methods driven by the procedures and cycles of financial accounting. Therefore, in many cases, the cost information needs of various decision making groups, for example design engineers, are not served satisfactorily. This paper studies if the activity-based costing (ABC) method could offer a compromise between the two extremes. Recognizing activities and activity chains as well as activity and cost drivers could be specially beneficial for design engineers. Also, recognizing the accurate and reliable product costs of existing products helps when doing variant design. However, ABC is not at its best if the cost system becomes too complicated. This is why a comprehensive ABC-cost information system with detailed cost information for the use of design engineers should be examined critically. ABC is at its best when considering such issues as which activities drive costs, the cost of product complexity, allocating indirect costs on the products, the relationships between processes and costs, and the cost of excess capacity.

Persistence of Transmitted HIV-1 Drug Resistance Mutations Associated with Fitness Costs and Viral Genetic Backgrounds.

Transmission of drug-resistant pathogens presents an almost-universal challenge for fighting infectious diseases. Transmitted drug resistance mutations (TDRM) can persist in the absence of drugs for considerable time. It is generally believed that differential TDRM-persistence is caused, at least partially, by variations in TDRM-fitness-costs. However, in vivo epidemiological evidence for the impact of fitness costs on TDRM-persistence is rare. Here, we studied the persistence of TDRM in HIV-1 using longitudinally-sampled nucleotide sequences from the Swiss-HIV-Cohort-Study (SHCS). All treatment-naïve individuals with TDRM at baseline were included. Persistence of TDRM was quantified via reversion rates (RR) determined with interval-censored survival models. Fitness costs of TDRM were estimated in the genetic background in which they occurred using a previously published and validated machine-learning algorithm (based on in vitro replicative capacities) and were included in the survival models as explanatory variables. In 857 sequential samples from 168 treatment-naïve patients, 17 TDRM were analyzed. RR varied substantially and ranged from 174.0/100-person-years;CI=[51.4, 588.8] (for 184V) to 2.7/100-person-years;[0.7, 10.9] (for 215D). RR increased significantly with fitness cost (increase by 1.6[1.3,2.0] per standard deviation of fitness costs). When subdividing fitness costs into the average fitness cost of a given mutation and the deviation from the average fitness cost of a mutation in a given genetic background, we found that both components were significantly associated with reversion-rates. Our results show that the substantial variations of TDRM persistence in the absence of drugs are associated with fitness-cost differences both among mutations and among different genetic backgrounds for the same mutation.

Task Trade and its determinants in Spain: a national and regional analysis

Globalisation and technological advances have made possible to offshore specific productive tasks (that do not require physical proximity to the actual location of the work unit) to foreign countries where these are usually performed at lower costs. We analyse the effect of task trade (i.e. task offshorability) on Spanish regional and national employment levels correlating a newly built index of task-delocalisation index to key variables such as the region’s wealth, the worker’s age and level of education, the importance of the service sector and the technological level of the economic activities undertaken in that particular geographical area. We conclude that approximately 25 per cent of Spanish occupations are potentially affected by task trade / offshoring and that this is likely to benefit Spanish economy (and the performance of specific regions, categories of workers and sectors) being Spain a potential recipient of tasks offshored from abroad. Also we obtain that Spain’s trade in tasks correlates strongly with the above variables, presenting significant regional differences.

Local privatization, intermunicipal cooperation, transaction costs and political interests: Evidence from Spain

Several empirical studies have analyzed the factors that influence local privatization. Variables related to fiscal stress, cost reduction, political processes and ideological attitudes are the most common explanatory variables used in these studies. In this paper, we add to this literature by examining the influence of transaction costs and political factors on local governments’ choices through new variables. In addition to this, we consider the role of additional aspects, such as intermunicipal cooperation as a potential alternative to privatization in order to exploit scale economies or scope economies. We consider two relevant services: solid waste collection and water distribution. Results from our estimates show that privatization (that is, contracting out to a private firm) is less common for water distribution than for solid waste collection. Higher transaction costs in water distribution are consistent with this finding. Furthermore, we find that municipalities with a conservative ruling party privatize more often regardless of the ideological orientation of the constituency. This shows that those political interests able to influence local elections are more important in determining the form of delivery than is the basic ideological stance of the constituency. Finally, we find that intermunicipal cooperation is an alternative to local privatization.

Technical and economic analysis of irrigation of asparagus bean in protected environment

This experiment was conducted in Lavras - state of Minas Gerais (MG), Brazil, in a protected environment, and aims to estimate the irrigation depths that maximize productivity and economic returns in the cultivation of asparagus bean and analyze the economic viability of irrigation management. The experimental delineation was randomized blocks with five treatments and four replications. The treatments consisted of five drip irrigation depths: 40, 70, 100, 130 and 160% of water replacement depth up to field capacity. The depths of water that maximize productivity and economic returns were obtained from the regression model adjusted to productivity data, cost of product relations and water cost. The economic viability was achieved on the benefit/cost ratio basis. The depth with the maximum economic return was estimated in 434.4mm, with a productivity of 35,160.6kg ha-1, which is economically viable for the cultivation of asparagus bean, with a expected profitability of R$ 1.70 for every real invested.

Identification of research trends in the field of separation processes. Application of epidemiological model, citation analysis, text mining, and technical analysis of the financial markets

Choice of industrial development options and the relevant allocation of the research funds become more and more difficult because of the increasing R&D costs and pressure for shorter development period. Forecast of the research progress is based on the analysis of the publications activity in the field of interest as well as on the dynamics of its change. Moreover, allocation of funds is hindered by exponential growth in the number of publications and patents. Thematic clusters become more and more difficult to identify, and their evolution hard to follow. The existing approaches of research field structuring and identification of its development are very limited. They do not identify the thematic clusters with adequate precision while the identified trends are often ambiguous. Therefore, there is a clear need to develop methods and tools, which are able to identify developing fields of research. The main objective of this Thesis is to develop tools and methods helping in the identification of the promising research topics in the field of separation processes. Two structuring methods as well as three approaches for identification of the development trends have been proposed. The proposed methods have been applied to the analysis of the research on distillation and filtration. The results show that the developed methods are universal and could be used to study of the various fields of research. The identified thematic clusters and the forecasted trends of their development have been confirmed in almost all tested cases. It proves the universality of the proposed methods. The results allow for identification of the fast-growing scientific fields as well as the topics characterized by stagnant or diminishing research activity.