Phylogenetic analyses of C4 photosynthesis evolution in grasses: genetics of convergence and convergence of genes

Summary : During the evolutionary diversification of organisms, similar ecological constraints led to the recurrent appearances of the same traits (phenotypes) in distant lineages, a phenomenon called convergence. In most cases, the genetic origins of the convergent traits remain unknown, but recent studies traced the convergent phenotypes to recurrent alterations of the same gene or, in a few cases, to identical genetic changes. However, these cases remain anecdotal and there is a need for a study system that evolved several times independently and whose genetic determinism is well resolved and straightforward, such as C4 photosynthesis. This adaptation to warm environments, possibly driven by past atmospheric CO2 decreases, consists in a CO2-concentrating pump, created by numerous morphological and biochemical novelties. All genes encoding C4 enzymes already existed in C3 ancestors, and are supposed to have been recruited through gene duplication followed by neo-functionalization, to acquire the cell specific expression pattern and altered kinetic properties that characterize Ca-specific enzymes. These predictions have so far been tested only in species-poor and ecologically marginal C4 dicots. The monocots, and especially the grass family (Poaceae), the most important C4 family in terms of species number, ecological dominance and economical importance, have been largely under-considered as suitable study systems. This thesis aimed at understanding the evolution of the C4 trait in grasses at a molecular level and to use the genetics of C4 photosynthesis to infer the evolutionary history of the C4 phenotype and its driving selective pressures. A molecular phylogeny of grasses and affiliated monocots identified 17 to 18 independent acquisitions of the C4 pathway in the grass family. A relaxed molecular clock was used to date these events and the first C4 evolution was estimated in the Chloridoideae subfamily, between 32-25 million years ago, at a period when atmospheric CO2 abruptly declined. Likelihood models showed that after the COZ decline the probability of evolving the C4 pathway strongly increased, confirming low CO2 as a likely driver of C4 photosynthesis evolution. In order to depict the genetic changes linked to the numerous C4 origins, genes encoding phopshoenolpyruvate carboxylase (PEPC), the key-enzyme responsible for the initial fixation of atmospheric CO2 in the C4 pathway, were isolated from a large sample of C3 and C4 grasses. Phylogenetic analyses were used to reconstruct the evolutionary history of the PEPC multigene family and showed that the evolution of C4-specific PEPC had been driven by positive selection on 21 codons simultaneously in up to eight C4 lineages. These selective pressures led to numerous convergent genetic changes in many different C4 clades, highlighting the repeatability of some evolutionary processes, even at the molecular level. PEPC C4-adaptive changes were traced and used to show multiple appearances of the C, pathway in clades where species tree inferences were unable to differentiate multiple C4 appearances and a single appearance followed by C4 to C3 reversion. Further investigations of genes involved in some of the C4 subtypes only (genes encoding decarboxylating enzymes NADP-malic enzyme and phosphoenolpyruvate carboxykinase) showed that these C4-enzymes also evolved through strong positive selection and underwent parallel genetic changes during the different Ca origins. The adaptive changes on these subtype-specific C4 genes were used to retrace the history of the C4-subtypes phenotypes, which revealed that the evolution of C4-PEPC and C4-decarboxylating enzymes was in several cases disconnected, emphasizing the multiplicity of the C4 trait and the gradual acquisition of the features that create the CO2-pump. Finally, phylogenetic analyses of a gene encoding the Rubisco (the enzyme responsible for the fixation of CO2 into organic compounds in all photosynthetic organisms) showed that C4 evolution switched the selective pressures on this gene. Five codons were recurrently mutated to adapt the enzyme kinetics to the high CO2 concentrations of C4 photosynthetic cells. This knowledge could be used to introgress C4-like Rubisco in C3 crops, which could lead to an increased yield under predicted future high CO2 atmosphere. Globally, the phylogenetic framework adopted during this thesis demonstrated the widespread occurrence of genetic convergence on C4-related enzymes. The genetic traces of C4 photosynthesis evolution allowed reconstructing events that happened during the last 30 million years and proved the usefulness of studying genes directly responsible for phenotype variations when inferring evolutionary history of a given trait. Résumé Durant la diversification évolutive des organismes, des pressions écologiques similaires ont amené à l'apparition récurrente de certains traits (phénotypes) dans des lignées distantes, un phénomène appelé évolution convergente. Dans la plupart des cas, l'origine génétique des traits convergents reste inconnue mais des études récentes ont montré qu'ils étaient dus dans certains cas à des changements répétés du même gène ou, dans de rares cas, à des changements génétiques identiques. Malgré tout, ces cas restent anecdotiques et il y a un réel besoin d'un système d'étude qui ait évolué indépendamment de nombreuses fois et dont le déterminisme génétique soit clairement identifié. La photosynthèse dite en Ça répond à ces critères. Cette adaptation aux environnements chauds, dont l'évolution a pu être encouragé par des baisses passées de la concentration atmosphérique en CO2, est constituée de nombreuses nouveautés morphologiques et biochimiques qui créent une pompe à CO2. La totalité des gènes codant les enzymes Ç4 étaient déjà présents dans les ancêtres C3. Leur recrutement pour la photosynthèse Ç4 est supposé s'être fait par le biais de duplications géniques suivies par une néo-fonctionnalisation pour leur conférer l'expression cellule-spécifique et les propriétés cinétiques qui caractérisent les enzymes C4. Ces prédictions n'ont jusqu'à présent été testées que dans des familles C4 contenant peu d'espèces et ayant un rôle écologique marginal. Les graminées (Poaceae), qui sont la famille C4 la plus importante, tant en termes de nombre d'espèces que de dominance écologique et d'importance économique, ont toujours été considérés comme un système d'étude peu adapté et ont fait le sujet de peu d'investigations évolutives. Le but de cette thèse était de comprendre l'évolution de la photosynthèse en C4 chez les graminées au niveau génétique et d'utiliser les gènes pour inférer l'évolution du phénotype C4 ainsi que les pressions de sélection responsables de son évolution. Une phylogénie moléculaire de la famille des graminées et des monocotylédones apparentés a identifié 17 à 18 acquisitions indépendantes de la photosynthèse chez les graminées. Grâce à une méthode d'horloge moléculaire relâchée, ces évènements ont été datés et la première apparition C4 a été estimée dans la sous-famille des Chloridoideae, il y a 32 à 25 millions d'années, à une période où les concentrations atmosphériques de CO2 ont décliné abruptement. Des modèles de maximum de vraisemblance ont montré qu'à la suite du déclin de CO2, la probabilité d'évoluer la photosynthèse C4 a fortement augmenté, confirmant ainsi qu'une faible concentration de CO2 est une cause potentielle de l'évolution de la photosynthèse C4. Afin d'identifier les mécanismes génétiques responsables des évolutions répétées de la photosynthèse C4, un segment des gènes codant pour la phosphoénolpyruvate carboxylase (PEPC), l'enzyme responsable de la fixation initiale du CO2 atmosphérique chez les plantes C4, ont été séquencés dans une centaine de graminées C3 et C4. Des analyses phylogénétiques ont permis de reconstituer l'histoire évolutive de la famille multigénique des PEPC et ont montré que l'évolution de PEPC spécifiques à la photosynthèse Ça a été causée par de la sélection positive agissant sur 21 codons, et ce simultanément dans huit lignées C4 différentes. Cette sélection positive a conduit à un grand nombre de changements génétiques convergents dans de nombreux clades différents, ce qui illustre la répétabilité de certains phénomènes évolutifs, et ce même au niveau génétique. Les changements sur la PEPC liés au C4 ont été utilisés pour confirmer des évolutions indépendantes du phénotype C4 dans des clades où l'arbre des espèces était incapable de différencier des apparitions indépendantes d'une seule apparition suivie par une réversion de C4 en C3. En considérant des gènes codant des protéines impliquées uniquement dans certains sous-types C4 (deux décarboxylases, l'enzyme malique à NADP et la phosphoénolpyruvate carboxykinase), des études ultérieures ont montré que ces enzymes C4 avaient elles-aussi évolué sous forte sélection positive et subi des changements génétiques parallèles lors des différentes origines de la photosynthèse C4. Les changements adaptatifs sur ces gènes liés seulement à certains sous-types C4 ont été utilisés pour retracer l'histoire des phénotypes de sous-types C4, ce qui a révélé que les caractères formant le trait C4 ont, dans certains cas, évolué de manière déconnectée. Ceci souligne la multiplicité du trait C4 et l'acquisition graduelle de composants participant à la pompe à CO2 qu'est la photosynthèse C4. Finalement, des analyses phylogénétiques des gènes codant pour la Rubisco (l'enzyme responsable de la fixation du CO2 en carbones organiques dans tous les organismes photosynthétiques) ont montré que l'évolution de la photosynthèse Ça a changé les pressions de sélection sur ce gène. Cinq codons ont été mutés de façon répétée afin d'adapter les propriétés cinétiques de la Rubisco aux fortes concentrations de CO2 présentes dans les cellules photosynthétiques des plantes C4. Globalement, l'approche phylogénétique adoptée durant cette thèse de doctorat a permis de démontré des phénomène fréquents de convergence génétique sur les enzymes liées à la photosynthèse C4. Les traces génétiques de l'évolution de la photosynthèse C4 ont permis de reconstituer des évènements qui se sont produits durant les derniers 30 millions d'années et ont prouvé l'utilité d'étudier des gènes directement responsables des variations phénotypiques pour inférer l'histoire évolutive d'un trait donné.

Comparison of thinning methods in a Scots pine stand on drained peatland : a simulation study

Tiivistelmä: Harvennusmenetelmien vertailu ojitetun turvemaan männikössä. Simulointitutkimus

Crescent and star shapes of members of the Chlamydiales order: impact of fixative methods.

Members of the Chlamydiales order all share a biphasic lifecycle alternating between small infectious particles, the elementary bodies (EBs) and larger intracellular forms able to replicate, the reticulate bodies. Whereas the classical Chlamydia usually harbours round-shaped EBs, some members of the Chlamydia-related families display crescent and star-shaped morphologies by electron microscopy. To determine the impact of fixative methods on the shape of the bacterial cells, different buffer and fixative combinations were tested on purified EBs of Criblamydia sequanensis, Estrella lausannensis, Parachlamydia acanthamoebae, and Waddlia chondrophila. A linear discriminant analysis was performed on particle metrics extracted from electron microscopy images to recognize crescent, round, star and intermediary forms. Depending on the buffer and fixatives used, a mixture of alternative shapes were observed in varying proportions with stars and crescents being more frequent in C. sequanensis and P. acanthamoebae, respectively. No tested buffer and chemical fixative preserved ideally the round shape of a majority of bacteria and other methods such as deep-freezing and cryofixation should be applied. Although crescent and star shapes could represent a fixation artifact, they certainly point towards a diverse composition and organization of membrane proteins or intracellular structures rather than being a distinct developmental stage.

Comparison of estimation methods of soil strength in five soils

In agriculture, the soil strength is used to describe the susceptibility to deformation by pressure caused by agricultural machine. The purpose of this study was to compare different methods for estimating the inherent soil strength and to identify their suitability for the evaluation of load support capacity, compaction susceptibility and root growth. The physical, chemical, mineralogical and intrinsic strength properties of seven soil samples, collected from five sampling pits at different locations in Brazil, were measured. Four clay (CS) and three sandy clay loam (SCL) soils were used. The clay soils were collected on a farm in Santo Ângelo, RS (28 º 16 ' 16 '' S; 54 º 13 ' 11 '' W 290 m); A and B horizons at the Universidade Federal de Lavras, Lavras, MG (21 º 13 ' 47 '' S; 44 º 58 ' 6'' W; 918 m) and on the farm Sygenta, in Uberlandia, MG (18 º 58 ' 37 '' S; 48 º 12 ' 05 '' W 866 m). The sandy clay loam soils were collected in Aracruz, ES (19 º 47 ' 10 '' S; 40 º 16 ' 29 '' W 81 m), and on the farm Xavier, Lavras, MG (21 º 13 ' 24 '' S; 45 º 05 ' 00 '' W; 844 m). Soil strength was estimated based on measurements of: (a) a pneumatic consolidometer, (b) manual pocket (non-rotating) penetrometer; and (c) automatic (rotating) penetrometer. The results of soil strength properties were similar by the three methods. The soil structure had a significant influence on soil strength. Results of measurements with both the manual pocket and the electric penetrometer were similar, emphasizing the influence of soil texture. The data showed that, to enhance the reliability of predictions of preconsolidation pressure by penetrometers, it is better to separate the soils into the different classes, rather than analyze them jointly. It can be concluded that the consolidometer method, although expensive, is the best when evaluations of load support capacity and compaction susceptibility of soil samples are desired.

Comparison of protection methods of pine stacks against Tomicus piniperda

Summary

Influence of digestion methods on the recovery of Iron, Zinc, Nickel, Chromium, Cadmium and Lead contents in 11 organic residues

There are currently many devices and techniques to quantify trace elements (TEs) in various matrices, but their efficacy is dependent on the digestion methods (DMs) employed in the opening of such matrices which, although "organic", present inorganic components which are difficult to solubilize. This study was carried out to evaluate the recovery of Fe, Zn, Cr, Ni, Cd and Pb contents in samples of composts and cattle, horse, chicken, quail, and swine manures, as well as in sewage sludges and peat. The DMs employed were acid digestion in microwaves with HNO3 (EPA 3051A); nitric-perchloric digestion with HNO3 + HClO4 in a digestion block (NP); dry ashing in a muffle furnace and solubilization of residual ash in nitric acid (MDA); digestion by using aqua regia solution (HCl:HNO3) in the digestion block (AR); and acid digestion with HCl and HNO3 + H2O2 (EPA 3050). The dry ashing method led to the greatest recovery of Cd in organic residues, but the EPA 3050 protocol can be an alternative method for the same purpose. The dry ashing should not be employed to determine the concentration of Cr, Fe, Ni, Pb and Zn in the residues. Higher Cr and Fe contents are recovered when NP and EPA 3050 are employed in the opening of organic matrices. For most of the residues analyzed, AR is the most effective method for recovering Ni. Microwave-assisted digestion methods (EPA3051 and 3050) led to the highest recovery of Pb. The choice of the DM that provides maximum recovery of Zn depends on the organic residue and trace element analyzed.

Comparison of digestion methods to determine heavy metals in fertilizers

The lack of a standard method to regulate heavy metal determination in Brazilian fertilizers and the subsequent use of several digestion methods have produced variations in the results, hampering interpretation. Thus, the aim of this study was to compare the effectiveness of three digestion methods for determination of metals such as Cd, Ni, Pb, and Cr in fertilizers. Samples of 45 fertilizers marketed in northeastern Brazil were used. A fertilizer sample with heavy metal contents certified by the US National Institute of Standards and Technology (NIST) was used as control. The following fertilizers were tested: rock phosphate; organo-mineral fertilizer with rock phosphate; single superphosphate; triple superphosphate; mixed N-P-K fertilizer; and fertilizer with micronutrients. The substances were digested according to the method recommended by the Ministry for Agriculture, Livestock and Supply of Brazil (MAPA) and by the two methods 3051A and 3052 of the United States Environmental Protection Agency (USEPA). By the USEPA method 3052, higher portions of the less soluble metals such as Ni and Pb were recovered, indicating that the conventional digestion methods for fertilizers underestimate the total amount of these elements. The results of the USEPA method 3051A were very similar to those of the method currently used in Brazil (Brasil, 2006). The latter is preferable, in view of the lower cost requirement for acids, a shorter digestion period and greater reproducibility.

Optimization of analytical methods for the assessment of the quality of fats and oils used in continuous deep fat frying

La aplicabilidad, repetibilidad y capacidad de diferentes métodos de análisis para discriminar muestras de aceites con diferentes grados de oxidación fueron evaluadas mediante aceites recogidos en procesos de fritura en continuo en varias empresas españolas. El objetivo de este trabajo fue encontrar métodos complementarios a la determinación del índice de acidez para el control de calidad rutinario de los aceites de fritura empleados en estas empresas. La optimización de la determinación de la constante dieléctrica conllevó una clara mejora de la variabilidad. No obstante, excepto en el caso del índice del ATB, el resto de métodos ensayados mostraron una menor variabilidad. La determinación del índice del ATB fue descartada ya que su sensibilidad fue insuficiente para discriminar entre aceites con diferente grado de oxidación. Los diferentes parámetros de alteración determinados en los aceites de fritura mostraron correlaciones significativas entre el índice de acidez y varios parámetros de oxidación diferentes, como la constante dieléctrica, el índice de p-anisidina, la absorción al ultravioleta y el contenido en polímeros de los triacilgliceroles. El índice de acidez solo evalúa la alteración hidrolítica, por lo que estos parámetros aportan información complementaria al evaluar la alteración termooxidativa.

A comparison of three methods of Mendelian randomization when the genetic instrument, the risk factor and the outcome are all binary.

The method of instrumental variable (referred to as Mendelian randomization when the instrument is a genetic variant) has been initially developed to infer on a causal effect of a risk factor on some outcome of interest in a linear model. Adapting this method to nonlinear models, however, is known to be problematic. In this paper, we consider the simple case when the genetic instrument, the risk factor, and the outcome are all binary. We compare via simulations the usual two-stages estimate of a causal odds-ratio and its adjusted version with a recently proposed estimate in the context of a clinical trial with noncompliance. In contrast to the former two, we confirm that the latter is (under some conditions) a valid estimate of a causal odds-ratio defined in the subpopulation of compliers, and we propose its use in the context of Mendelian randomization. By analogy with a clinical trial with noncompliance, compliers are those individuals for whom the presence/absence of the risk factor X is determined by the presence/absence of the genetic variant Z (i.e., for whom we would observe X = Z whatever the alleles randomly received at conception). We also recall and illustrate the huge variability of instrumental variable estimates when the instrument is weak (i.e., with a low percentage of compliers, as is typically the case with genetic instruments for which this proportion is frequently smaller than 10%) where the inter-quartile range of our simulated estimates was up to 18 times higher compared to a conventional (e.g., intention-to-treat) approach. We thus conclude that the need to find stronger instruments is probably as important as the need to develop a methodology allowing to consistently estimate a causal odds-ratio.

Evaluation of Alternative Methods to Obtain Specific Gravity of Coarse Aggregate, MLR-89-7, 1990

AASHTO has a standard test method for determining the specific gravity of aggregates. The people in the Aggregate Section of the Central Materials Laboratory perform the AASHTO T-85 test for AMRL inspections and reference samples. Iowa's test method 201B, for specific gravity determinations, requires more time and more care to perform than the AASHTO procedure. The major difference between the two procedures is that T-85 requires the sample to be weighed in water and 201B requires the 2 quart pycnometer jar. Efficiency in the Central Laboratory would be increased if the AASHTO procedure for coarse aggregate specific gravity determinations was adopted. The questions to be answered were: (1) Do the two procedures yield the same test results? (2) Do the two procedures yield the same precision? An experiment was conducted to study the different test methods. From the experimental results, specific gravity determinations by AASHTO T-85 method were found to correlate to those obtained by the Iowa 201B method with an R-squared value of 0.99. The absorption values correlated with an R-squared value of 0.98. The single operator precision was equivalent for the two methods. Hence, this procedure was recommended to be adopted in the Central Laboratory.

A Study of Curing Methods and Type II Cements on the Durability of Concrete, R-11-Z(1), 1969

A program of A (90 day moist room), B (14 day moist room) and C (7 day moist room and 7 day 50%_humidity) type curing for the R-11-Z program of durability of concrete using the automatic freeze and thaw machine (ASTM C-291) has been used in the Materials Department of the Iowa State Highway Commission since December 6, 1966. A summary of the results obtained from then until March 25, 1968, indicates that the B and C type curing are yielding very little valuable information. However, the A cure exhibits a wide range of durability factors and also groups the aggregates in an order which is related to the service record (there are definite exceptions. The biggest disadvantage to the A cure is the length of time that it takes to complete the test (90 day cure and 38 day test). The Kansas Highway Department has experimented with different cements and aggregates in order to determine which combination offers a concrete with the best durability factor possible. In an experimental test section of highway, concrete made with a Type II cement appeared to have better durability than others made with Type I cements. Because of this, a question has been raised at the Iowa State Highway Commission - Can concrete made with Type II cements, because of a lesser amount of tricalcium aluminate, yield better durability than concrete made with Type I cements?

Analyse critique des résultats de biopsies musculaires et de la méthodologie utilisée dans 889 cas d'affections neuromusculaires [Critical analysis of the results of muscle biopsies and of the methods used in 889 cases of neuromuscular disorders]

The contribution of muscle biopsies to the diagnosis of neuromuscular disorders and the indications of various methods of examination are investigated by analysis of 889 biopsies from patients suffering from myopathic and/or neurogenic disorders. Histo-enzymatic studies performed on frozen material as well as immunohistochemistry and electron microscopy allowed to provide specific diagnoses in all the neurogenic disorders (polyneuropathies and motor neuron diseases), whereas one third of myopathies remained uncertain. Confrontation of neuropathological data with the clinical indications for histological investigations shows that muscle biopsies reveal the diagnosis in 25% of the cases (mainly in congenital and metabolic myopathies) and confirm and/or complete the clinical diagnosis in 50%. In the remaining cases with non specific abnormalities neuropathological investigations may help the clinician by excluding well defined neuromuscular disorders. Analysis of performed studies and results of investigations show the contribution and specificity of each method for the diagnosis. Statistical evaluation of this series indicates that cryostat sectioning for histo- and immunochemical and electron microscopy increases the rate of diagnoses of neuromuscular diseases: full investigation was necessary for the diagnosis in 30% of the cases. The interpretation of the wide range of pathological reactions in muscles requires a close cooperation with the clinician.

Chances and limits of method restriction: a detailed analysis of suicide methods in Switzerland.

The objective of this study was to estimate the potential of method restriction as a public health strategy in suicide prevention. Data from the Swiss Federal Statistical Office and the Swiss Institutes of Forensic Medicine from 2004 were gathered and categorized into suicide submethods according to accessibility to restriction of means. Of suicides in Switzerland, 39.2% are accessible to method restriction. The highest proportions were found in private weapons (13.2%), army weapons (10.4%), and jumps from hot-spots (4.6%). The presented method permits the estimation of the suicide prevention potential of a country by method restriction and the comparison of restriction potentials between suicide methods. In Switzerland, reduction of firearm suicides has the highest potential to reduce the total number of suicides.