996 resultados para conductivity property
Resumo:
This thesis advances the understanding of the impact of stigma on property values. A case study in Wellington, New Zealand, enabled hedonic modelling and an empirical analysis to determine the impact of the stigma from the high voltage transmission line structure and how long the stigma remained after removal. The results reveal a substantial difference between the discount applied to individual properties while the structure is in place, as compared to the overall increase in neighbourhood value once the structure, which created the stigma, is removed.
Resumo:
In large sedimentary basins with layers of different rocks, the groundwater flow between aquifers depends on the hydraulic conductivity (K) of the separating low-permeable rocks, or aquitards. Three methods were developed to evaluate K in aquitards for areas with limited field data: • Coherence and harmonic analysis: estimates the regional-scale K based on water-level fluctuations in adjacent aquifers. • Cokriging and Bayes' rule: infers K from downhole geophysical logs. • Fluvial process model: reproduces the lithology architecture of sediment formations which can be converted to K. These proposed methods enable good estimates of K and better planning of further drillholes.
Resumo:
Diverse morphologies of multidimensional hierarchical single-crystalline ZnO nanoarchitectures including nanoflowers, nanobelts, and nanowires are obtained by use of a simple thermal evaporation and vapour-phase transport deposition technique by placing Au-coated silicon substrates in different positions inside a furnace at process temperatures as low as 550 °C. The nucleation and growth of ZnO nanostructures are governed by the vapour–solid mechanism, as opposed to the commonly reported vapour–liquid–solid mechanism, when gold is used in the process. The morphological, structural, compositional and optical properties of the synthesized ZnO nanostructures can be effectively tailored by means of the experimental parameters, and these properties are closely related to the local growth temperature and gas-phase supersaturation at the sample position. In particular, room-temperature photoluminescence measurements reveal an intense near-band-edge ultraviolet emission at about 386 nm for nanobelts and nanoflowers, which suggests that these nanostructures are of sufficient quality for applications in, for example, optoelectronic devices.
Resumo:
Plasma-assisted magnetron sputtering with varying ambient conditions has been utilised to deposit Al-doped ZnO (AZO) transparent conductive thin films directly onto a glass substrate at a low substrate temperature of 400 °C. The effects of hydrogen addition on electrical, optical and structural properties of the deposited AZO films have been investigated using X-ray diffractometry (XRD), scanning electron microscopy (SEM), Hall effect measurements and UV–vis optical transmission spectroscopy. The results indicate that hydrogen addition has a remarkable effect on the film transparency and conductivity with the greatest effects observed with a hydrogen flux of approximately 3 sccm. It has been demonstrated that the conductivity and the average transmittance in the visible range can increase simultaneously contrary to the effects observed by other authors. In addition, hydrogen incorporation further leads to the absorption edge shifting to a shorter wavelength due to the Burstein–Moss effect. These results are of particular relevance to the development of the next generation of optoelectronic and photovoltaic devices based on highly transparent conducting oxides with controllable electronic and optical properties.
Resumo:
Parameters of a discharge sustained in a planar magnetron configuration with crossed electric and magnetic fields are studied experimentally and numerically. By comparing the data obtained in the experiment with the results of calculations made using the proposed theoretical model, conclusion was made about the leading role of the turbulence-driven Bohm electron conductivity in the low-pressure operation mode (up to 1 Pa) of the discharge in crossed electric and magnetic fields. A strong dependence of the width of the cathode sputter trench, associated with the ionization region of the magnetron discharge, on the discharge parameters was observed in the experiments. The experimental data were used as input parameters in the discharge model that describes the motion of secondary electrons across the magnetic field in the ionization region and takes into account the classical, near-wall, and Bohm mechanisms of electron conductivity.
Resumo:
Recent international experiences have reinforced the peril to people and property from rising sea levels and associated water events. The related risks, while perhaps more obvious for properties located in coastal regions, can also impact upon inland properties. These risks are slowly influencing changes to planning practices and attitudes. This paper examines these risks from the perspective of land values and identifies the matters, and processes, that should be adopted in valuation practices.
Resumo:
(Figure Presented) Unusual conductivity effects: Suitably functionalized dendrimers (see picture) are capable of forming truly covalent three-dimensional networks with remarkably high conductivity on electrochemical doping. Depending on the charging level of the electroactive components used as building blocks for the dendrimer core and the perimeter, two separated regimes of electrical conductivity can be observed.
Resumo:
In recent times, blended polymers have shown a lot of promise in terms of easy processability in different shapes and forms. In the present work, polyaniline emeraldine base (PANi-EB) was doped with camphor sulfonic acid (CSA) and combined with the conducting polymer polyfluorene (PF) as well as the insulating polymer polyvinyl chloride (PVC) to synthesize CSA doped PANi-PF and PANi-PVC blended polymers. It is well known that PANi when doped with CSA becomes highly conducting. However, its poor mechanical properties, such as low tensile, compressive, and flexural strength render PANi a non-ideal material to be processed for its various practical applications, such as electromagnetic shielding, anti-corrosion shielding, photolithography and microelectronic devices etc. Thus the search for polymers which are easily processable and are capable of showing high conductivity still continues. PANi-PVC blend was prepared, which showed low conductivity which is limiting factor for certain applications. Therefore, another processable polymer PF was chosen as conducting matrix. Conducting PF can be easily processed into various shapes and forms. Therefore, a blend mixture was prepared by using PANi and PF through the use of CSA as a counter ion which forms a "bridge" between the two polymeric components of the inter-polymer complex. Two blended polymers have been synthesized and investigated for their conductivity behaviour. It was observed that the blended film of CSA doped PANi-PVC showed a room temperature electrical conductivity of 2.8 × 10-7 S/cm where as the blended film made by CSA doped PANi with conducting polymer PF showed a room temperature conductivity of 1.3 × 10-5 S/cm. Blended films were irradiated with 100 MeV silicon ions with a view to increase their conductivity with a fluence ranging from 1011 ions to 1013 per cm2 from 15 UD Pelletron accelerator at NSC, New Delhi.
Resumo:
In its simplest form the patent system is designed to encourage the disclosure of innovative thought in exchange for a period of exclusivity in which the grantee of the rights may profit from such knowledge. I will attempt in this paper to show that patentees seeking to enforce their patents in Australia will face great difficulty through a number of potentially fatal pitfalls. I also submit that as a result of the decisions in Australia in reported patent cases in the last ten years, legal advisers should place their clients on notice that if they are trying to enforce their patents they are unlikely to succeed...
Resumo:
This submission relates to the proposed amendment of the Crown Use provisions in the Patents Act 1990 (Cth) (“the Patents Act”),which are contained in Intellectual Property Laws Amendment Bill 2013 (“The Bill”). Specifically, the submission relates to the method of calculation of the remuneration payable to the patent applicant/owner in circumstances where the Crown exercises its rights under Chapter 17 of the Patents Act.
Resumo:
Inspired by similar reforms introduced in New Zealand, Canada and the United States, the Commonwealth, with the co-operation of the States, seeks in the Personal Property Securities Bill 2008 (the Bill) to introduce a central repository of recorded information reflecting particular security interests in personal property in Australia. Specifically, the interest recorded is an interest in personal property provided for by a transaction that in substance secures the payment or the performance of an obligation. In addition to providing a notification of the use of the personal property as collateral to secure the payment of monies or the performance of an obligation, the Bill proposes to introduce a regime of prioritising interests in the same collateral. Central to this prioritisation are the concepts of a ‘perfected security interests’and ‘unperfected security interests’. Relevantly, a perfected security interest in collateral has priority over an unperfected security interest in the same collateral. The proposed mechanisms rely on the fundamental integer of personal property, which is defined as any property other than land. Recognising that property may take a tangible as well as an intangible form, the Bill reflects an appreciation of the fact that some property may have a tangible form which may act as collateral, and simultaneously the same property may involve other property, intangible property in the form of intellectual property rights, which in their own right may be the subject of a‘security agreement’. An example set out in the Commentary on the Consultation Draft of the Bill (the Commentary), indicates the practical implications involving certain property which have multiple profiles for the purposes of the Bill. This submission is concerned with the presumptions made in relation to the interphase between tangible property and intangible property arising from the same personal property, as set out in s 30 of the Bill.
Resumo:
With respect to “shape” marks, there would appear to be a “break”, imposed by the Australian Courts, in the logical conclusion that registration of a shape, which performs a functional purpose, or even further, is indistinguishable from the shape of the item or product, creates a perpetual monopoly in the manufacture of that product.
Resumo:
This thesis introduces a theory of intellectual property (IP) law informed by Islamic Shari'a. The sources and objectives of Islamic Shari'a support the theoretical framework underpinning IP laws. However, they strongly emphasise the importance of development goals in intellectual property policy making. This thesis argues that an optimal IP system from an Islamic perspective shall not overprotect IP holders but should instead endeavor to empower people to access knowledge resources to enhance access to education, public health and economic opportunities. Taking Libya as a case study, this thesis makes recommendations for the improvement of IP law that have important broader implications for developing countries.
Resumo:
This article examines the new Property Occupations Act 2014 (POA) and relevant provisions of the Agents Financial Administration Act 2014 (AFAA) and the impacts for property practitioners. The Acts are due to commence later in 2014 once regulations and relevant forms are drafted. Coinciding with the commencement of the Acts further versions of the REIQ Houses and Land Contract and REIQ Community Title Contract will also be released. The POA introduces changes for licencing of real estate agents, property developers and resident letting agents as well as significant changes for the contract formation process. The AFAA includes the trust account and claim fund provisions of PAMDA, which avoids duplication of these provisions across each of the industry-specific Bills. The most significant change is to the process for making a claim against the fund for the conduct of property agents.
Resumo:
The aluminum (Al) doped polycrystalline p-type β-phase iron disilicide (p-β-FeSi2) is grown by thermal diffusion of Al from Al-passivated n-type Si(100) surface into FeSi2 during crystallization of amorphous FeSi2 to form a p-type β-FeSi 2/n-Si(100) heterostructure solar cell. The structural and photovoltaic properties of p-type β-FeSi2/n-type c-Si structures is then investigated in detail by using X-ray diffraction, Raman spectroscopy, transmission electron microscopy analysis, and electrical characterization. The results are compared with Al-doped p-β-FeSi2 prepared by using cosputtering of Al and FeSi2 layers on Al-passivated n-Si(100) substrates. A significant improvement in the maximum open-circuit voltage (Voc) from 120 to 320 mV is achieved upon the introduction of Al doping through cosputtering of Al and amorphous FeSi2 layer. The improvement in Voc is attributed to better structural quality of Al-doped FeSi2 film through Al doping and to the formation of high quality crystalline interface between Al-doped β-FeSi2 and n-type c-Si. The effects of Al-out diffusion on the performance of heterostructure solar cells have been investigated and discussed in detail.