A new approach for wind and solar type DG placement in power distribution networks to enhance systems stability

This paper proposes a distributed generator (DG) placement methodology based on newly defined term reactive power loadability. The effectiveness of the proposed planning is carried out over a distribution test system representative of the Kumamoto area in Japan. Firstly, this paper provides simulation results showing the sensitivity of the location of renewable energy based DG on voltage profile and stability of the system. Then, a suitable location is identified for two principal types DG, i. e., wind and solar, separately to enhance the stability margin of the system. The analysis shows that the proposed approach can reduce the power loss of the system, which in turn, reduces the size of compensating devices.

Incompatibilidade distributiva e desenvolvimento auto-sustentado

Effective macroeconomic stability and sustained economic growth will only be achieved in Brazil when the country settles the distributive inconsistency that arose in the 1970s. Since then the state and the nation started to incur respectively in high domestic and foreign debt. Wages grew at much slower rate than productivity, and income concentrated in the hands of business entrepreneurs and particularly of rentiers. Sheer populist practices, or disguised combination of neo-liberal and neopopulist policies were unable to address the problem. Budget deficits and high inflation, or exchange rate overvaluation and financial crises were the typical outcome. To settle distributive inconsistency by compensating in the short term workers for their income losses is not realistic. Only a consistent growth strategy and a credible commitment to share future growth benefits, combined with active social policies oriented to the poor, will do the job.

Measures of the welfare cost of inflation: a complete ordering

This paper presents three contributions to the literature on the welfare cost of ináation. First, it introduces a new sensible way of measuring this cost - that of a compensating variation in consumption or income, instead of the equivalent variation notion that has been extensively used in empirical and theoretical research during the past fiftt years. We Önd this new measure to be interestingly related to the proxy measure of the shopping-time welfare cost of ináation introduced by Simonsen and Cysne (2001). Secondly, it discusses for which money-demand functions this and the shopping-time measure can be evaluated in an economically meaningful way. And, last but not least, it completely orders a comprehensive set of measures of the welfare cost of ináation for these money-demand specification. All of our results are extended to an economy in which there are many types of monies present, and are illustrated with the log-log money-demand specification.

Controle vetorial de velocidade de uma máquina de indução sem mancais trifásica com bobinado dividido utilizando estimação neural de fluxo

This work describes the study and the implementation of the vector speed control for a three-phase Bearingless induction machine with divided winding of 4 poles and 1,1 kW using the neural rotor flux estimation. The vector speed control operates together with the radial positioning controllers and with the winding currents controllers of the stator phases. For the radial positioning, the forces controlled by the internal machine magnetic fields are used. For the radial forces optimization , a special rotor winding with independent circuits which allows a low rotational torque influence was used. The neural flux estimation applied to the vector speed controls has the objective of compensating the parameter dependences of the conventional estimators in relation to the parameter machine s variations due to the temperature increases or due to the rotor magnetic saturation. The implemented control system allows a direct comparison between the respective responses of the speed and radial positioning controllers to the machine oriented by the neural rotor flux estimator in relation to the conventional flux estimator. All the system control is executed by a program developed in the ANSI C language. The DSP resources used by the system are: the Analog/Digital channels converters, the PWM outputs and the parallel and RS-232 serial interfaces, which are responsible, respectively, by the DSP programming and the data capture through the supervisory system

Controle vetorial de velocidade de um motor de indução trifásico com estimação neural de fluxo

This work describes the study and the implementation of the speed control for a three-phase induction motor of 1,1 kW and 4 poles using the neural rotor flux estimation. The vector speed control operates together with the winding currents controller of the stator phasis. The neural flux estimation applied to the vector speed controls has the objective of compensating the parameter dependences of the conventional estimators in relation to the parameter machine s variations due to the temperature increases or due to the rotor magnetic saturation. The implemented control system allows a direct comparison between the respective responses of the speed controls to the machine oriented by the neural rotor flux estimator in relation to the conventional flux estimator. All the system control is executed by a program developed in the ANSI C language. The main DSP recources used by the system are, respectively, the Analog/Digital channels converters, the PWM outputs and the parallel and RS-232 serial interfaces, which are responsible, respectively, by the DSP programming and the data capture through the supervisory system

Changes on emitter discharge under different water temperature and pressure

The study was conducted at the Research Laboratory of Hydraulic and Irrigation Group in the Rural Engineering Department, Technical University of Madrid (Universidad Politecnica de Madrid), Madrid, Spain. Water temperatures of 20, 30, 40 degrees C and system pressures often encountered in irrigation practices of 80, 90, 100, 110, 120, 130, 140, 150, 160, 170, 180, 190 and 200 k Pa were applied to determine the effects of different water temperatures and pressures on emitter discharge. Non-pressure compensating in-line emitter which has turbulent flow regime with a long-path (labyrinth), emitter discharge was 4 L h(-1) at system pressure of 100 kPa according to the manufacturer recommended, was used. Emitters were spaced 20 cm along the drip laterals with 16 mm diameter. Discharge equations and coefficients of variation related to temperatures of 20, 30 and 40 degrees C were obtained as q = 0.375H(0.51), q = 0.358H(0.52), q = 0.346H(0.53) and 2.68, 2.09, 3.65, respectively. Discharge of the emitter was affected by different system pressures and increased as potentially (R = 0993-0996). In general. the emitter discharge increased with increasing temperature. However, especially in the common system pressures of 90-120 k Pa, differences of obtained emitter discharges between the different water temperatures were not significant (1%).

Contribuições ao método de rastreamento de máxima potência para sistemas fotovoltaicos

The scarcity of natural resources and the search for alternative energy sources promote a rapid change in the energy world. Among the renewable energy sources, solar energy is the most promising, presenting technology of greatest growth rate nowadays. Researchers around the world are seeking ways to facilitate their progress, developing technologies with higher efficiency and lower cost. As a contribution to global progress, this master thesis proposes the development of a strategy of maximum power tracking based on perturbation and observation method for photovoltaic systems. The proposed control strategy is based on active power balance of the system, with a reduced number of sensors. It also allows the PV system to act as a regulator of the power quality at the point of commom coupling (PCC), compensating the harmonic distortion and power factor of the current netw

Probing bilinear R-parity violating supergravity at the LHC

We study the collider phenomenology of bilinear R-parity violating supergravity, the simplest effective model for supersymmetric neutrino masses accounting for the current neutrino oscillation data. At the CERN Large Hadron Collider the center-of-mass energy will be high enough to probe directly these models through the search for the superpartners of the Standard Model (SM) particles. We analyze the impact of R-parity violation on the canonical supersymmetry searches-that is, we examine how the decay of the lightest supersymmetric particle (LSP) via bilinear R-parity violating interactions degrades the average expected missing momentum of the reactions and show how this diminishes the reach in the usual channels for supersymmetry searches. However, the R-parity violating interactions lead to an enhancement of the final states containing isolated same-sign di-leptons and trileptons, compensating the reach loss in the fully inclusive channel. We show how the searches for displaced vertices associated to LSP decay substantially increase the coverage in supergravity parameter space, giving the corresponding reaches for two reference luminosities of 10 and 100 fb(-1) and compare with those of the R-parity conserving minimal supergravity model.

Massive and massless spin-1 particles with gauge symmetry without Stueckelberg fields

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Ultrastructure of the mature testicular vesicle of Pseudonannolene tocaiensis Fontanetti, 1996 (Diplopoda, Pseudonannolenidae)

The mature testicular vesicles of the species Pseudonannolene tocaiensis have three portions: a peripheral portion; a central portion that is typically secretory and between these two an intermediary portion, a lumen filled with spermatozoa. Both secretory and peripheral portions present the same type of cells. The ultrastructural analysis of the peripheral portion suggests it is involved in hormone synthesis. The secretory portion probably contributes to the production of spermatic fluid, compensating for the absence of male accessory glands in this species. (c) 2007 Elsevier Ltd. All rights reserved.

Paracellular Absorption: A Bat Breaks the Mammal Paradigm

Bats tend to have less intestinal tissue than comparably sized nonflying mammals. The corresponding reduction in intestinal volume and hence mass of digesta carried is advantageous because the costs of flight increase with load carried and because take-off and maneuverability are diminished at heavier masses. Water soluble compounds, such as glucose and amino acids, are absorbed in the small intestine mainly via two pathways, the transporter-mediated transcellular and the passive, paracellular pathways. Using the microchiropteran bat Artibeus literatus (mean mass 80.6 +/- 3.7 g), we tested the predictions that absorption of water-soluble compounds that are not actively transported would be extensive as a compensatory mechanism for relatively less intestinal tissue, and would decline with increasing molecular mass in accord with sieve-like paracellular absorption. Using a standard pharmacokinetic technique, we fed, or injected intraperitonealy the metabolically inert carbohydrates L-rhamnose (molecular mass = 164 Da) and cellobiose (molecular mass = 342 Da) which are absorbed only by paracellular transport, and 3-O-methyl-D-glucose (3OMD-glucose) which is absorbed via both mediated (active) and paracellular transport. As predicted, the bioavailability of paracellular probes declined with increasing molecular mass (rhamnose, 90 +/- 11%; cellobiose, 10 +/- 3%, n = 8) and was significantly higher in bats than has been reported for laboratory rats and other mammals. In addition, absorption of 3OMD-glucose was high (96 +/- 11%). We estimated that the bats rely on passive, paracellular absorption for more than 70% of their total glucose absorption, much more than in non-flying mammals. Although possibly compensating for less intestinal tissue, a high intestinal permeability that permits passive absorption might be less selective than a carrier-mediated system for nutrient absorption and might permit toxins to be absorbed from plant and animal material in the intestinal lumen.

Infinite symmetries in the Skyrme model

We show that the Skyrme theory possesses a submodel with an infinite number of local conserved currents. The constraints leading to the submodel explore a decomposition of SU(2) with a complex field parametrizing the symmetric space SU(2)/U(1) and a real field in the direction of U(1). We demonstrate that the Skyrmions of topological charges ii belong to such integrable sector of the theory. Our results open ways to the development of exact methods, compensating for the non-existence of a BPS type sector in the Skyrme theory. (C) 2001 Published by Elsevier B.V. B.V.

Conformal invariance of massless Duffin-Kemmer-Petiau theory in Riemannian spacetimes

We investigate the conformal invariance of massless Duffin-Kemmer-Petiau theory coupled to Riemannian spacetimes. We show that, as usual, in the minimal coupling procedure only the spin I sector of the theory - which corresponds to the electromagnetic field - is conformally invariant. We also show that the conformal invariance of the spin 0 sector can be naturally achieved by introducing a compensating term in the Lagrangian. Such a procedure - besides not modifying the spin I sector - leads to the well-known conformal coupling between the scalar curvature and the massless Klein-Gordon-Fock field. Going beyond the Riemannian spacetimes, we briefly discuss the effects of a nonvanishing torsion in the scalar case.

Seed size and genotype effects on maize (Zea mays L.) yield under different technology levels

Final plant population in maize crop was used as a basis to identify the technology level of a given farmer. Final population of 50,000 plants/hectare was considered as an indication of a high technology level farmer; 35,000 of a medium, and 20,000 of a low technology level farmer. These populations were artificially obtained for the hybrids HT-2X, BR-201, and BR-205 from small, medium and large seeds. The results showed the triple cross hybrid HT-2X to be the most indicated for low technology level regions, due to its lesser sensitivity to variations in seed size and also to its significant outyielding of the other two hybrids. The double cross hybrids BR-201 and BR-205 exhibited much higher sensitivity to variations in seed size so that if they have to be used in a low technology region, the most recommended procedure would be to make use of the largest possible seeds. In conclusion, genotype and seed size seem to be factors capable of compensating for plant population reductions in maize crops. The more prolific hybrids and the largess seeds are more indicated for low technology level regions.

Low triioothyronine (T-3) or reverse triioothyronine (rT(3)) syndrome modifies gene expression in rats with congestive heart failure

Heart failure (NF) is frequently associated with euthyroid sicksyndrome (low T-3 and elevated rT(3)). We investigated if altered thyroid hormone in HF could affect expression of the TH receptor (TR alpha 1), and alpha and beta myosin heavy chains (alpha-MHC beta-MHC). HF was provoked in rats by aortic stenosis. We showed that rT(3) generated front liver and kidney deiodination significantly increased and T-3 decreased in HE; there was significantly higher TR alpha 1 expression, no alpha-MHC expression, but beta-MHC expression. Changes in TR alpha 1 could be compensating for low T-3 from HF.