803 resultados para common agent architecture design


Relevância:

40.00% 40.00%

Publicador:

Resumo:

INTRODUCTION: We present the protocol of a large population-based case-control study of 5 common tumors in Spain (MCC-Spain) that evaluates environmental exposures and genetic factors. METHODS: Between 2008-2013, 10,183 persons aged 20-85 years were enrolled in 23 hospitals and primary care centres in 12 Spanish provinces including 1,115 cases of a new diagnosis of prostate cancer, 1,750 of breast cancer, 2,171 of colorectal cancer, 492 of gastro-oesophageal cancer, 554 cases of chronic lymphocytic leukaemia (CLL) and 4,101 population-based controls matched by frequency to cases by age, sex and region of residence. Participation rates ranged from 57% (stomach cancer) to 87% (CLL cases) and from 30% to 77% in controls. Participants completed a face-to-face computerized interview on sociodemographic factors, environmental exposures, occupation, medication, lifestyle, and personal and family medical history. In addition, participants completed a self-administered food-frequency questionnaire and telephone interviews. Blood samples were collected from 76% of participants while saliva samples were collected in CLL cases and participants refusing blood extractions. Clinical information was recorded for cases and paraffin blocks and/or fresh tumor samples are available in most collaborating hospitals. Genotyping was done through an exome array enriched with genetic markers in specific pathways. Multiple analyses are planned to assess the association of environmental, personal and genetic risk factors for each tumor and to identify pleiotropic effects. DISCUSSION: This study, conducted within the Spanish Consortium for Biomedical Research in Epidemiology & Public Health (CIBERESP), is a unique initiative to evaluate etiological factors for common cancers and will promote cancer research and prevention in Spain.

Relevância:

40.00% 40.00%

Publicador:

Resumo:

Parameters such as tolerance, scale and agility utilized in data sampling for using in Precision Agriculture required an expressive number of researches and development of techniques and instruments for automation. It is highlighted the employment of methodologies in remote sensing used in coupled to a Geographic Information System (GIS), adapted or developed for agricultural use. Aiming this, the application of Agricultural Mobile Robots is a strong tendency, mainly in the European Union, the USA and Japan. In Brazil, researches are necessary for the development of robotics platforms, serving as a basis for semi-autonomous and autonomous navigation systems. The aim of this work is to describe the project of an experimental platform for data acquisition in field for the study of the spatial variability and development of agricultural robotics technologies to operate in agricultural environments. The proposal is based on a systematization of scientific work to choose the design parameters utilized for the construction of the model. The kinematic study of the mechanical structure was made by the virtual prototyping process, based on modeling and simulating of the tension applied in frame, using the.

Relevância:

40.00% 40.00%

Publicador:

Resumo:

Due to various advantages such as flexibility, scalability and updatability, software intensive systems are increasingly embedded in everyday life. The constantly growing number of functions executed by these systems requires a high level of performance from the underlying platform. The main approach to incrementing performance has been the increase of operating frequency of a chip. However, this has led to the problem of power dissipation, which has shifted the focus of research to parallel and distributed computing. Parallel many-core platforms can provide the required level of computational power along with low power consumption. On the one hand, this enables parallel execution of highly intensive applications. With their computational power, these platforms are likely to be used in various application domains: from home use electronics (e.g., video processing) to complex critical control systems. On the other hand, the utilization of the resources has to be efficient in terms of performance and power consumption. However, the high level of on-chip integration results in the increase of the probability of various faults and creation of hotspots leading to thermal problems. Additionally, radiation, which is frequent in space but becomes an issue also at the ground level, can cause transient faults. This can eventually induce a faulty execution of applications. Therefore, it is crucial to develop methods that enable efficient as well as resilient execution of applications. The main objective of the thesis is to propose an approach to design agentbased systems for many-core platforms in a rigorous manner. When designing such a system, we explore and integrate various dynamic reconfiguration mechanisms into agents functionality. The use of these mechanisms enhances resilience of the underlying platform whilst maintaining performance at an acceptable level. The design of the system proceeds according to a formal refinement approach which allows us to ensure correct behaviour of the system with respect to postulated properties. To enable analysis of the proposed system in terms of area overhead as well as performance, we explore an approach, where the developed rigorous models are transformed into a high-level implementation language. Specifically, we investigate methods for deriving fault-free implementations from these models into, e.g., a hardware description language, namely VHDL.

Relevância:

40.00% 40.00%

Publicador:

Resumo:

La leucémie lymphoblastique aigüe (LLA) est une maladie génétique complexe. Malgré que cette maladie hématologique soit le cancer pédiatrique le plus fréquent, ses causes demeurent inconnues. Des études antérieures ont démontrées que le risque à la LLA chez l’enfant pourrait être influencé par des gènes agissant dans le métabolisme des xénobiotiques, dans le maintient de l’intégrité génomique et dans la réponse au stress oxydatif, ainsi que par des facteurs environnementaux. Au cours de mes études doctorales, j’ai tenté de disséquer davantage les bases génétiques de la LLA de l’enfant en postulant que la susceptibilité à cette maladie serait modulée, au moins en partie, par des variants génétiques agissant dans deux voies biologiques fondamentales : le point de contrôle G1/S du cycle cellulaire et la réparation des cassures double-brin de l’ADN. En utilisant une approche unique reposant sur l’analyse d’une cohorte cas-contrôles jumelée à une cohorte de trios enfants-parents, j’ai effectué une étude d’association de type gènes/voies biologiques candidats. Ainsi, j’ai évaluer le rôle de variants provenant de la séquence promotrice de 12 gènes du cycle cellulaire et de 7 gènes de la voie de réparation de l’ADN, dans la susceptibilité à la LLA. De tels polymorphismes dans la région promotrice (pSNPs) pourraient perturber la liaison de facteurs de transcription et mener à des différences dans les niveaux d’expression des gènes pouvant influencer le risque à la maladie. En combinant différentes méthodes analytiques, j’ai évalué le rôle de différents mécanismes génétiques dans le développement de la LLA chez l’enfant. J’ai tout d’abord étudié les associations avec gènes/variants indépendants, et des essaies fonctionnels ont été effectués afin d’évaluer l’impact des pSNPs sur la liaison de facteurs de transcription et l’activité promotrice allèle-spécifique. Ces analyses ont mené à quatre publications. Il est peu probable que ces gènes de susceptibilité agissent seuls; j’ai donc utilisé une approche intégrative afin d’explorer la possibilité que plusieurs variants d’une même voie biologique ou de voies connexes puissent moduler le risque de la maladie; ces travaux ont été soumis pour publication. En outre, le développement précoce de la LLA, voir même in utero, suggère que les parents, et plus particulièrement la mère, pourraient jouer un rôle important dans le développement de cette maladie chez l’enfant. Dans une étude par simulations, j’ai évalué la performance des méthodes d’analyse existantes de détecter des effets fœto-maternels sous un design hybride trios/cas-contrôles. J’ai également investigué l’impact des effets génétiques agissant via la mère sur la susceptibilité à la LLA. Cette étude, récemment publiée, fût la première à démontrer que le risque de la leucémie chez l’enfant peut être modulé par le génotype de sa mère. En conclusions, mes études doctorales ont permis d’identifier des nouveaux gènes de susceptibilité pour la LLA pédiatrique et de mettre en évidence le rôle du cycle cellulaire et de la voie de la réparation de l’ADN dans la leucémogenèse. À terme, ces travaux permettront de mieux comprendre les bases génétiques de la LLA, et conduiront au développement d’outils cliniques qui amélioreront la détection, le diagnostique et le traitement de la leucémie chez l’enfant.

Relevância:

40.00% 40.00%

Publicador:

Resumo:

Contexte : L’anémie falciforme ou drépanocytose est un problème de santé important, particulièrement pour les patients d’origine africaine. La variation phénotypique de l’anémie falciforme est problématique pour le suivi et le traitement des patients. L’architecture génomique responsable de cette variabilité est peu connue. Principe : Mieux saisir la contribution génétique de la variation clinique de cette maladie facilitera l’identification des patients à risque de développer des phénotypes sévères, ainsi que l’adaptation des soins. Objectifs : L’objectif général de cette thèse est de combler les lacunes relatives aux connaissances sur l’épidémiologie génomique de l’anémie falciforme à l’aide d’une cohorte issue au Bénin. Les objectifs spécifiques sont les suivants : 1) caractériser les profils d’expressions génomiques associés à la sévérité de l’anémie falciforme ; 2) identifier des biomarqueurs de la sévérité de l’anémie falciforme ; 3) identifier la régulation génétique des variations transcriptionelles ; 4) identifier des interactions statistiques entre le génotype et le niveau de sévérité associé à l’expression ; 5) identifier des cibles de médicaments pour améliorer l’état des patients atteints d’anémie falciforme. Méthode : Une étude cas-témoins de 250 patients et 61 frères et soeurs non-atteints a été menée au Centre de Prise en charge Médical Intégré du Nourrisson et de la Femme Enceinte atteints de Drépanocytose, au Bénin entre février et décembre 2010. Résultats : Notre analyse a montré que des profils d’expressions sont associés avec la sévérité de l’anémie falciforme. Ces profils sont enrichis de génes des voies biologiques qui contribuent à la progression de la maladie : l’activation plaquettaire, les lymphocytes B, le stress, l’inflammation et la prolifération cellulaire. Des biomarqueurs transcriptionnels ont permis de distinguer les patients ayant des niveaux de sévérité clinique différents. La régulation génétique de la variation de l’expression des gènes a été démontrée et des interactions ont été identifiées. Sur la base de ces résultats génétiques, des cibles de médicaments sont proposées. Conclusion: Ce travail de thèse permet de mieux comprendre l’impact de la génomique sur la sévérité de l’anémie falciforme et ouvre des perspectives de développement de traitements ciblés pour améliorer les soins offerts aux patients.

Relevância:

40.00% 40.00%

Publicador:

Resumo:

Most of the commercial and financial data are stored in decimal fonn. Recently, support for decimal arithmetic has received increased attention due to the growing importance in financial analysis, banking, tax calculation, currency conversion, insurance, telephone billing and accounting. Performing decimal arithmetic with systems that do not support decimal computations may give a result with representation error, conversion error, and/or rounding error. In this world of precision, such errors are no more tolerable. The errors can be eliminated and better accuracy can be achieved if decimal computations are done using Decimal Floating Point (DFP) units. But the floating-point arithmetic units in today's general-purpose microprocessors are based on the binary number system, and the decimal computations are done using binary arithmetic. Only few common decimal numbers can be exactly represented in Binary Floating Point (BF P). ln many; cases, the law requires that results generated from financial calculations performed on a computer should exactly match with manual calculations. Currently many applications involving fractional decimal data perform decimal computations either in software or with a combination of software and hardware. The performance can be dramatically improved by complete hardware DFP units and this leads to the design of processors that include DF P hardware.VLSI implementations using same modular building blocks can decrease system design and manufacturing cost. A multiplexer realization is a natural choice from the viewpoint of cost and speed.This thesis focuses on the design and synthesis of efficient decimal MAC (Multiply ACeumulate) architecture for high speed decimal processors based on IEEE Standard for Floating-point Arithmetic (IEEE 754-2008). The research goal is to design and synthesize deeimal'MAC architectures to achieve higher performance.Efficient design methods and architectures are developed for a high performance DFP MAC unit as part of this research.

Relevância:

40.00% 40.00%

Publicador:

Resumo:

All intelligence relies on search --- for example, the search for an intelligent agent's next action. Search is only likely to succeed in resource-bounded agents if they have already been biased towards finding the right answer. In artificial agents, the primary source of bias is engineering. This dissertation describes an approach, Behavior-Oriented Design (BOD) for engineering complex agents. A complex agent is one that must arbitrate between potentially conflicting goals or behaviors. Behavior-oriented design builds on work in behavior-based and hybrid architectures for agents, and the object oriented approach to software engineering. The primary contributions of this dissertation are: 1.The BOD architecture: a modular architecture with each module providing specialized representations to facilitate learning. This includes one pre-specified module and representation for action selection or behavior arbitration. The specialized representation underlying BOD action selection is Parallel-rooted, Ordered, Slip-stack Hierarchical (POSH) reactive plans. 2.The BOD development process: an iterative process that alternately scales the agent's capabilities then optimizes the agent for simplicity, exploiting tradeoffs between the component representations. This ongoing process for controlling complexity not only provides bias for the behaving agent, but also facilitates its maintenance and extendibility. The secondary contributions of this dissertation include two implementations of POSH action selection, a procedure for identifying useful idioms in agent architectures and using them to distribute knowledge across agent paradigms, several examples of applying BOD idioms to established architectures, an analysis and comparison of the attributes and design trends of a large number of agent architectures, a comparison of biological (particularly mammalian) intelligence to artificial agent architectures, a novel model of primate transitive inference, and many other examples of BOD agents and BOD development.

Relevância:

40.00% 40.00%

Publicador:

Resumo:

El presente proyecto de grado se inscribe bajo el proyecto de Responsabilidad Social Empresarial de la línea de investigación de Realidad Empresarial de la Facultad de Administración de la Universidad del Rosario. El problema de investigación surge de dos problemas actuales, que convergen en la insostenibilidad a largo y mediano plazo de la manera en que se hacen la mayoría de los negocios hoy en día. El primer problema, es el de suficiencia, se evidencia desde el punto de vista del consumidor, el cual pareciera estar diseñado para comprar y acumular objetos y cosas que luego de un tiempo irán a parar a la basura. El segundo problema es el modelo de negocio que extrae recursos, los transforma, los comercializa de manera repetitiva y obliga al cliente a seguir comprando, olvidando que la mayoría de cosas que produce, terminan en el basurero. La deficiencia actual del consumismo insostenible y del diseño que no piensa en las generaciones futuras son dos caras de la misma moneda. Por eso es que se estudia el problema desde la perspectiva tanto del consumidor, como del productor. Las tendencias internacionales relacionadas con la sostenibilidad están llevando a los negocios por una nueva senda, la cual les dará ventajas competitivas a los adoptadores tempranos. A raíz de los problemas planteados y con el objetivo de encontrar la sostenibilidad empresarial, se estudia una posible solución para cada actor del problema. Por el lado del consumidor, se analiza la teoría que gira alrededor del consumo responsable y de cómo los consumidores tienen el poder de causar un efecto positivo con lo que mejor saben hacer: comprando (y eligiendo que comprar). Por el lado del productor se estudia un nuevo modelo de negocios llamado el sistema producto-servicio, el cual se enfoca a satisfacer necesidades de los clientes por medio de una combinación de prestación de servicios y facilitación de productos, en vez de la comercialización de estos. Es decir que en vez de vender cosas que los consumidores quieran acumular (problema de suficiencia), se les vende soluciones que satisfagan sus necesidades, reteniendo la compañía la propiedad sobre los productos que integran al servicio. Se estudia también de que maneras este modelo particular de sistemas producto-servicio puede ser recibido por los consumidores de hoy en día, tan acostumbrados al modelo actual. Se quiere explorar el sistema de productos y servicio como una alternativa empresarial perdurable que solucione los retos ambientales del siglo XXI. Para poder probar la viabilidad de este hipotético modelo que cambia los patrones de interacción de las empresas con los usuarios, se plantea una idea de negocio que integre productos y servicios para satisfacer las necesidades del cliente. Se escogió un área viii caracterizada por ser de las más consumistas y acumuladoras en cuanto al volumen de compras anual de los clientes: el negocio de la ropa. Y no solo cualquier tipo de ropa, sino el de la moda rápida, un modelo que obliga a los consumidores a comprar ropa con una frecuencia aún mayor. Se hizo esto con el objetivo de probar que el modelo propuesto puede funcionar inclusive bajo los supuestos más “consumistas” que existen hoy en día.

Relevância:

40.00% 40.00%

Publicador:

Resumo:

The idea of an expressive component in research is important to the architectural industry. The expressive element - the possibility of expressing the qualitative aspects of the world and adding something new to the existing through experiments and proposals - is characteristic for the field. All research environments, in the science tradition and in the humanities, have their characteristics. On the one hand, they live up to certain common scientific and methodological criteria - originality and transparency – and on the other hand, they have different practices, using different methods. Research is ‘coloured’ by traditions and professions, and research in architecture should be coloured too, taking into consideration that the practice of architects stretches from natural science and sociology to art and that the most important way in which the architect achieves new cognition is through work with form and space – drawings, models and completed works. Probably all good design is informed by some kind of research – research- based design. But can research arise from design?

Relevância:

40.00% 40.00%

Publicador:

Resumo:

Bayesian decision procedures have recently been developed for dose escalation in phase I clinical trials concerning pharmacokinetic responses observed in healthy volunteers. This article describes how that general methodology was extended and evaluated for implementation in a specific phase I trial of a novel compound. At the time of writing, the study is ongoing, and it will be some time before the sponsor will wish to put the results into the public domain. This article is an account of how the study was designed in a way that should prove to be safe, accurate, and efficient whatever the true nature of the compound. The study involves the observation of two pharmacokinetic endpoints relating to the plasma concentration of the compound itself and of a metabolite as well as a safety endpoint relating to the occurrence of adverse events. Construction of the design and its evaluation via simulation are presented.

Relevância:

40.00% 40.00%

Publicador:

Resumo:

We propose a bridge between two important parallel programming paradigms: data parallelism and communicating sequential processes (CSP). Data parallel pipelined architectures obtained with the Alpha language can be embedded in a control intensive application expressed in CSP-based Handel formalism. The interface is formally defined from the semantics of the languages Alpha and Handel. This work will ease the design of compute intensive applications on FPGAs.

Relevância:

40.00% 40.00%

Publicador:

Resumo:

Polyvinylpyrrolidone is a widely used in tablet formulations with the linear form acting as a wetting agent and disintegrant whereas the cross-linked form is a super-disintegrant. We have previously reported that simply mixing the commercial cross-linked polymer with ibuprofen disrupted drug crystallinity with consequent improvements in drug dissolution behavior. In this study, we have designed and synthesized novel cross-linking agents containing a range of oligoether moieties which have then be polymerized with vinylpyrrolidone to generate a suite of novel excipients with enhanced hydrogen-bonding capabilities. The polymers have a porous surface and swell in most common solvents and in water; properties which suggest their value as disintegrants. The polymers were evaluated in simple physical mixtures with ibuprofen as a model poorly-water soluble drug. The results show that the novel PVPs induce the drug to become “X-ray amorphous”, which increased dissolution to a greater extent than that seen with commercial cross-linked PVP. The polymers stabilize the amorphous drug with no evidence for recrystallization seen after 20 weeks storage.