Hierarchical status and colour preference in Nile tilapia (Oreochromis niloticus)

We studied the colour preference of isolated Nile tilapia (Oreochromis niloticus) and whether previous residence or body size can affect environmental colour choice. In the first phase, a cylindrical tank was divided into five differently coloured compartments (yellow, blue, green, white and red), a single fish was introduced into the tank and the frequency at which this fish visited each compartment was recorded over a 2-day study period. An increasingly larger fish (approx +2 cm in length each time) was then added into the tank on each of days 3, 5 and 7 (=four fish in the tank by day 7), and the frequency at which each fish visited the different compartments of the tank was observed twice a day to obtain visit frequency data on the differently sized fishes. This experiment was replicated six times. In the first phase, the solitary fish established residence inside the yellow compartment on the first and second days. Following the introduction of a larger fish, the smaller fish was displaced from the occupied compartment. Nile tilapia possibly shows this preference for yellow as a function of its visual spectral sensitivity and/or the spectral characteristics of its natural environment. Moreover, body size is an important factor in determining hierarchical dominance and territorial defence, and dominant fish chose the preferred environmental colour compartment as their territory.

Effects of forest fragmentation, anthropogenic edges and fruit colour on the consumption of ornithocoric fruits

We investigated effects of fruit colour (red, black or white), habitat (anthropogenic edges and forest interior) and fragment size on the removal of artificial fruits in semideciduous forests in south-east Brazil. Eight forest fragments ranging from 251 to 36,000 ha were used. We used artificial fruits, which were placed on shrubs between I and 2 m in height and checked after 48 and 96 h for peck marks in the fruits. All three variables affected the probability of consumption of our fruit models. Red and black fruits were statistically more pecked than the white fruits. The probability of fruit consumption was lower in the interior than at the edge and less in small than in large fragments. However, the decrease fruit consumption in small compared with large fragments was more accentuated for red and black fruits than for white fruits. Our results show that habitat reduction and edges affect the chances of a fruit being eaten by birds, which may ultimately affect plant fitness in forest fragments. (C) 2003 Elsevier B.V. Ltd. All rights reserved.

Geographic patterns in fruit colour diversity: do leaves constrain the colour of fleshy fruits?

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Tribute to R.G. Boutilier: Skin colour and body temperature changes in basking Bokermannohyla alvarengai (Bokermann 1956)

In amphibians solar basking far from water sources is relatively uncommon since the highly permeable amphibian skin does not represent a significant barrier to the accompanying risk of losing water by evaporation. A South American frog, Bokermannohyla alvarengai (Bokermann 1956), however, spends a significant amount of the day exposed to full sun and relatively high temperatures. The means by which this frog copes with potentially high rates of evaporative water loss and high body temperatures are unknown. Thus, in this study, skin colour changes, body surface temperature, and evaporative water loss rates were examined under a mixture of field and laboratory conditions to ascertain whether changes in skin reflectivity play an important role in this animal's thermal and hydric balance. Field data demonstrated a tight correlation between the lightness of skin colour and frog temperature, with lighter frogs being captured possessing higher body temperatures. Laboratory experiments supported this relationship, revealing that frogs kept in the dark or at lower temperatures (20 degrees C) had darker skin colours, whereas frogs kept in the light or higher temperatures (30 degrees C) had skin colours of a lighter hue. Light exhibited a stronger influence on skin colour than temperature alone, suggesting that colour change is triggered by the increase in incident solar energy and in anticipation of changes in body temperature. This conclusion is corroborated by the observation that cold, darkly coloured frogs placed in the sun rapidly became lighter in colour during the initial warming up period (over the first 5 min), after which they warmed up more slowly and underwent a further, albeit slower, lightening of skin colour. Surprisingly, despite its natural disposition to bask in the sun, this species does not possess a 'waterproof' skin, since its rates of evaporative water loss were not dissimilar from many hylid species that live in arboreal or semi-aquatic environments. The natural history of B. alvarengai is largely unknown and, therefore, it is likely that the herein reported colour change and basking behaviour represent a complex interaction between thermoregulation and water balance with other ecologically relevant functions, such as crypsis.

Loss in tocopherols and oxidative stability during the frying of frozen cassava chips

The present study was aimed at verifying tocopherols losses and oxidative stability changes in vegetable oils used in discontinuous frying. The frying of frozen cassava chips was carried out in a household electric frying pan, where the oil was heated to a temperature of 180 degrees C for 25 hours, with fresh oil replacement. The results obtained from the analytical determinations were submitted to variance analysis, in a factorial scheme, using a completely randomized design, making it possible to determine the influence of the type of oil and frying times on changes in the oil. The data show that the smallest changes occur in palm oil, which is more saturated. For sunflower and cottonseed oils, which are more unsaturated, there was a clear decrease in both tocopherol concentration and oxidative stability.

The night and day of dung beetles (Coleoptera, Scarabaeidae) in the Serra do Japi, Brazil: elytra colour related to daily activity

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effects of nitrate and phosphate availabilities on growth, photosynthesis and pigment and protein contents in colour strains of Hypnea musciformis (Wulfen in Jacqu.) J.V. Lamour. (Gigartinales, Rhodophyta)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Arrays of gold microelectrodes made from split integrated circuit chips

A simple and inexpensive way to fabricate arrays of gold microelectrodes is proposed. Integrated circuit chips are sawed through their middle, normal to the longest axis, leading to destruction of the silicon circuit and rupture of the gold wires that interconnect it with the external terminals. Polishing the resulting rough surface converts the tips of the wires embedded in the chip halves into arrays of gold microdisks of about 25 mu m diameter. The number of active microelectrodes (MEs), of an array depends on the number of pins in the chip, n, being typically (n/2)-4. These MEs can be used individually or externally interconnected in any combination. X-ray images of the chips and micrographs of the resulting surface of the polished arrays have revealed variable distances between neighbor MEs, which are, however, larger than 10 times the radius of the disks. This feature of the MEs prevents diffusional cross-talk between electrodes. The use of these microdisk electrodes for analytical purposes exhibits sigmoidal voltammograms, and chronoamperometric experiments confirm the nonlinear i vs. t(1/2) plots, typical for processes where radial diffusion prevails. Satisfactory uniformity was observed for the response of each electrode of an array, indicating similarity of geometry and disk areas. The potentialities of these MEs were demonstrated by the determination of cadmium at ppb levels using square wave voltammetry with preconcentration. Due to the relative ease with which these MEs can be manufactured and their good performance in (chemical) analysis, wide applications in electrochemistry and electroanalysis is envisioned.

A square-wave voltammetric method for analysing the colour marker quinizarine in petrol and diesel fuels

This work presents an electroanalytical method based on square-wave voltammetry (SWV) for the determination of quinizarine (QNZ) in a mixture of Britton-Robinson buffer 0.08 mol L-1 with 30% of acetonitrile. The QNZ was oxidized at glassy carbon electrode in and the well-defined peak at +0.45 V vs. Ag/AgCl can be used for its determination as colour marker in fuel samples. All parameters were optimized and analytical curves can be constructed for QNZ concentrations ranging from 2.0 x 10(-6) mol L-1 to 1.4 x 10(-5) mol L-1, using f = 60 Hz and E-sw = 25 mV. The method offers a limit detection of 4.12 x 10(-7) mol L-1 and a standard deviation of 4.5% when six measurements of 1.25 x 10(-5) mol L-1 are compared. The method was successfully applied for determining QNZ in gasoline and diesel oil and the obtained results showed good agreement with those reported previously. (c) 2006 Elsevier Ltd. All rights reserved.

Flow-through cell based on an array of gold microelectrodes obtained from modified integrated circuit chips

The construction of a flow-through cell incorporating an array of gold microelectrodes is described and its application to flow injection analysis with amperometric detection is presented, Simple modification of almost any conventional integrated circuit chip, used as an inexpensive source of pre-assembled gold micro-wires, leads to the rapid and successful preparation of arrays of 8-48 elements, the polymeric encapsulation material from the top face of the chip is removed by abrasion until the gold micro-mires (used to interconnect the silicon circuit to the external contact pins of the chip) are disrupted and their transversal (elliptical) sections become exposed. Once polished, the flat and smooth top surface of the gold microelectrode-array chip (MEAC) is provided with a spacer and fitted under pressure against an acrylic block with the reference and auxiliary electrodes, to form the electrochemical (thin-layer) flow cell, while the contact pins are plugged into a standard IC socket, This design ensures autonomous electric contact with each electrode and allows fast dismantling for polishing or substitution, the performance of flow cells with MEACs was investigated utilizing the technique of reverse pulse amperometry without oxygen removal, A method was established for the determination of the copper concentration in sugar cane spirit, regulated by law for beverages, Samples from industrial producers and small-scale (alembic) brewers were compared, With a 24 MEAC, a detection limit of 30 mu g I-l of copper (4.7 x 10(-7) mol l(-1) of Cu-II for 100 mu l injections) was calculated, Routine operation was established at a frequency of 60-90 determinations per hour, Intercomparison with atomic absorption spectrometric determinations resulted in excellent agreement.

Effects of ambient colour on colour preference and growth of juvenile rainbow trout Oncorhynchus mykiss (Walbaum)

Colour preference of individual juvenile rainbow trout Oncorhynchus mykiss was tested at 1 and 12 degrees C, and also at 12 degrees C after a 42 day growth experiment under white, blue, green, yellow or red ambient colour. All experiments were carried out under controlled laboratory conditions and the preference was assessed by the location of the fish in a preference tank with four chambers. Rainbow trout showed a preference for blue and green at 1 degrees C and for green at 12 degrees C. After the growth experiment the fish reared in blue tanks preferred blue and green but green was the most preferred colour for the fish reared in green, yellow and red tanks. Yellow and especially red chambers were avoided, irrespective of the ambient colour during the growth trial. The final mass of fish reared in the red aquaria was significantly smaller than that of the fish in green tanks. In addition, when the data of the preference tests were correlated with the data of the growth experiment using mean values of the four tested colours, a very good linear relationship was observed between the preference (i.e. visit frequency in coloured compartments) and growth rate as well as food intake. When considering the results both from the preference and growth trials it is suggested that green is the best environmental colour for rearing juvenile rainbow trout while rearing in a red environment cannot be recommended. (c) 2008 The Authors Journal compilation (c) 2008 The Fisheries Society of the British Isles.

The correlation between subordinate fish eye colour and received attacks: a negative social feedback mechanism for the reduction of aggression during the formation of dominance hierarchies

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effects of environmental colour on growth of Nile tilapia, Oreochromis niloticus (Linnaeus, 1758), maintained individually or in groups

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Study on the mutagenicity and antimutagenicity of a natural food colour (annatto) in mouse bone marrow cells

Most manufactured foods contain chemicals added as a deliberate part of the manufacturing process. The aims of the present study were to evaluate the mutagenicity and antimutagenicity of annatto, a natural pigment extracted from the Bixa orellana L. and widely used as a colorant in foods. The micronucleus test was performed in bone marrow cells from Swiss male mice treated with one of the three concentrations of annatto (1330, 5330 and 10,670 ppm), incorporated into the diet. The animals were fed with the diets for 7 days and sacrificed 24 h after the last treatment. For the evaluation of the antimutagenic potential of annatto, at day 7, the animals received an intraperitoneal injection of cyclophosphamide (50 mg/kg body weight). Under the concentrations tested annatto did not present mutagenic or antimutagenic activities on the mice bone marrow cells. However, an increased frequency of micronucleated cells was observed when the highest concentration (10,670 ppm) was administered simultaneously with cyclophosphamide. In conclusion, the data indicate that annatto colour, for the conditions used, is neither mutagenic nor an inhibitor of induced mutations, although it should be used carefully since high doses may increase the effect of a mutagen. © 2003 Elsevier Science Ltd. All rights reserved.

Evaluation of hardness and colour change of soft liners after accelerated ageing.

INTRODUCTION: Soft liners have been developed to offer comfort to denture wearers. However, this comfort is compromised when there is a change in the properties of the material, causing colour change, solubility, absorption and hardening. These characteristics can compromise the longevity of soft liners. AIM: The aim of this in vitro study was to investigate the effect of ageing on both the hardness and colour change of two soft liners following accelerated ageing. METHODS: Two denture liners, one resin based (Trusoft, Bosworth, Illinois, USA) and one silicone based (Ufi Gel P, Voco GMBH, Cuxhaven, Germany), were tested in this study for both hardness (using the Shore A scale) and colour change (using the CIE L*a*b* colour scale), initially and after 1008 hours (6 weeks) of accelerated ageing. Statistical analysis was performed using the unpaired t-test with the Welch correction. RESULTS: These indicated that both materials increased in hardness and underwent colour change after accelerated ageing. The initial hardness of Trusoft was far lower than that of Ufi Gel P (18.2 Shore A units vs 34.8 Shore A units). However, for Trusoft the changes for both hardness (from 18.2 to 52.1 Shore A units) and colour change (16.85 on the CIE L*a*b* colour scale) were greater than those for Ufi Gel P, for which hardness changed from 34.8 to 36.5 Shore A units and the colour change was 5.19 on the CIE L*a*b* colour scale. CONCLUSIONS: Ufi Gel P underwent less hardness and colour change after accelerated ageing than Trusoft. On the other hand, the use of Trusoft may be preferable in cases where initial softness is a major consideration, such as when relining an immediate denture after implant surgery.