Avaliação da tenacidade à fratura de diferentes sistemas cerâmicos

Although ceramics present high compressive strength, they are brittle materials due to their low tensile strength so they have lower capacity to absorb shocks. This study evaluated the fracture toughness of different ceramic systems, which refers to the ability of a friable material to absorb defformation energy. Three ceramic systems were investigated. Ten cylindrical samples (5,0mm x 3,0mm), were obtained from each ceramic material as follows: G1- 10 samples of Vitadur Alpha (Vita-Zahnfabrik); G2- 10 samples of IPS Empress2 (Ivoclar-Vivadent); G3- 10 samples of In-Ceram Alumina (Vita-Zahnfabrik). Fracture toughness values were collected upon indentation tests that were performed under a heavy load. A microhardness tester (Digital Microhardness Tester FM) utilized a 500gf load cell during 10seconds to perform four impressions on each sample. Statistically significant results were observed (ANOVA and Kruskal-Wallis tests). In-Ceram Alumina presented the highest median toughness values (2,96N/m3/2), followed by Vitadur Alpha (2,08N/m3/2) and IPS Empress2 (1,05N/m3/2). It may be concluded that different ceramic systems present distinct fracture toughness values, thus In-Ceram is capable of absorbing superior stress when compared to Vitadur Alpha and IPS Empress2.

Laminados cerâmicos em dentes tratados endodonticamente: considerações restauradoras e endodônticas com finalidade protética

A harmonia e beleza de um sorriso podem ser comprometidos pela presença de apenas um dente da região anterior que se apresente escurecido, mesmo que os demais elementos estejam alinhados e com forma adequada. A alteração de coloração, mesmo que mínima, sendo na região frontal é capaz de gerar um ponto de tensão e de desequilíbrio no sorriso, concentrando o olhar do observador no local1,2,3. Logo, a demanda dos pacientes por um sorriso estético, belo e harmonioso aumenta o desafio do profissional que visa integrar as características ópticas de um dente anterior despolpado e escurecido com os demais dentes polpados e sem manchamentos significativos. O clareamento é a alternativa mais conservadora para resolver o escurecimento em dentes despolpados. Apesar de resultados satisfatórios, alguns clínicos e autores relutam em assumir, como rotina, os procedimentos de clareamento para dentes despolpados, pelo alto índice de recidiva de escurecimento4,5. Mas, é importante lembrar que as recidivas descritas, normalmente, não contemplam um retorno aos valores inicias de manchamento. Deve ser feito um bom planejamento, levando em considerações fatores como a idade do paciente, o grau de escurecimento, o tempo em que o dente se encontra escurecido e a dificuldade em se alcançar o clareamento do dente, que são determinantes para o sucesso do tratamento clareador e para estabelecer a longevidade do clareamento obtido. Por isso, não são todos os dentes despolpados que apresentam alteração de cor que podem ser clareados, devendo ser avaliados com precisão os critérios estabelecidos3. Os dentes tratados endodonticamente e escurecidos, muitas vezes, necessitam da reintegração estética, associando as técnicas de clareamento com procedimentos restauradores ou, dependendo da condição do dente, a escolha imediata por procedimentos restauradores diretos ou indiretos.

Plástica gengival associada à laminados cerâmicos para resolução estética

Sometimes we face clinical situations in which the lack of harmony in the smile is caused by a major exhibition of the gingival tissue. In these cases the professional should be able to perform a detailed analysis of the static and dynamic components of the smile, in search of a satisfactory planning and treatment which may include different dental specialties. For these situations, the association of periodontics/prosthesis is a viable alternative that has been used positively in search of an aesthetic and functional condition that benefits the patient, without leaving aside the preservation of periodontal tissues and of the remaining structure of the tooth. Thus, the aim of this study was to describe a case in which the association between these two areas was proposed to correct gummy smile and dental vestibularization. Clinical results and the satisfaction of the patient indicate that this multidisciplinary treatment combining periodontal and prosthetic techniques is favorable to positive results in cases of compromised smile aesthetics due to excessive gum tissue.

Construtivismo e métodos tradicionais: uma análise dos processos de alfabetização atuais

This paper intended to observe the alphabetization process in Brazil, looking for the constructivist model and its difficulties also observing the phonic and the syllabic methods in order to consider the adaptations of these methods for the children’s learning writing language. Without choose between one method in particular this article purposes to do a study of the difficulties that the children shows during the learning of the lecture and writing, in order to help the teachers to think about the problems found and how they may obtain solutions for them when they are in the front of a different group of students.

Análise da resposta dielétrica e varistora de compostos cerâmicos multifásicos à base de Ca2CU2Ti4-xSnxO12 (0,0 < x< 4,0)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Ocorrências e usos do Tucumã (astrocaryum vulgare mart) em comunidades ribeirinhas, quilombolas e de agricultores tradicionais no município de Irituia, Pará

The aim of the study is to demonstrate the occurrence and usage of the Tucumã (Astrocaryum vulgare Mart.) in rural areas of the Municipality of Irituia, in the State of Pará (Brazil), since the use of the palm part of the traditional culture of communities of farmers, riparian and quilombola, used in curing diseases in human and domestic animals, building shelters, obtaining fibers, production of tools and crafts, hunting and fishing. In addition to the uses reported by the population, tucumã has potential for the production of oil and biodiesel. In this sense, the Federal University of Pará – UFPA, in a partnership with the Irituia’s Municipal Government, is studying the implementation of an oleaginous processing plant in the municipality, among them, and includes the Tucumã as a potential source. Such proposal stipulates the production in the agroforestry system, as an alternative to the slash and burn agriculture in the region, reconciling environmental conservation with territorial rural development. Considering the results obtained in the field, it has been found an average of 9.4 stumps per hectare, each stump having 7.7 stipes and 4.7 racemes with up to 146 fruits. If all the Tucumã’s stumps were kept until they reached their average productivity capacity, it is estimated that the fruit production in the rural area of the municipality would be around 132.060 tons, which could produce up to 12.665,4 tons/year of pulp oil and 4.768,4 tons/year of nut oil, confirming the supply of raw material to move this productive chain.

Inativação fotodinâmica em biofilme de Streptococcus mutans sobre bráquetes metálicos e cerâmicos: um estudo in vitro

Pós-graduação em Odontologia Restauradora - ICT

Benefícios na execução de uma obra sustentável em contrapartida aos métodos tradicionais da construção civil

The civil construction sector in Brazil is, simultaneously, a necessity that drives the economy and an evil that degrades the environment. Simple choices adopted in an enterprise can make big difference in harm caused by constructive practices, minimizing its harmful to the environment and making it sustainable. These choices, however, involve the use of materials and techniques often unknown by the builders, since the construction industry is very traditional. Even worse, the eco-friendly materials and sustainable techniques also face another obstacle to its use: the prejudice. Builders and customers prefer traditional methods to sustain belief that they present lower quality and higher price. This work raises awareness of the urgency with traditional methods must be overridden, showing practical and simple ways for this replacement, as well as confirm the quality equal to or even higher in the use of alternative materials and techniques, without addition in cost. Thus, the benefits are generated for all parties involved, from builders to residents

Estudo das propriedades ópticas de pós cerâmicos à base de Zn3Ga2Ge2O10: X% Cr3+ (X = 0 ; 0,5 ; 0,75 ; 1,0)

Ceramic powders based on Zn3Ga2Ge2O10: Cr3+ X% (X = 0.0; 0.5; 0.75; 1.0) were synthesized by solid-state reaction method. The gallium-zinc germanate doped with chromium presents an interesting property of phosphorescence, that means, it is capable of emitting light when excited by a source of radiation, and such emission remains for some time after stopping the source. For this reason, these materials can be widely applied in night-vision surveillance, (through the use of solar energy, for example), electronic devices screen, emergency routes signals, control panels indicators in dark environments, etc. In this job were considered different amounts of dopant in order to perform a comparison of structural and photoluminescent properties. For that, some analyses were performed on samples, such as XRD, FT-Raman, SEM, UV-vis and photoluminescence measurements (PL). Such analysis allowed to infer that the presence of chromium results in no phase transformation, so that the four compositions have the same set of phases: cubic, rhombohedral and hexagonal. Although the structure was not changed, chromium influences other properties / characteristics of these materials. Examples are: increase of band-gap, decrease of average particle size, small changes in binding energy checked by Raman and especially the increase of photoluminescent property. The chromium ions have great ease in replacing gallium ions in octahedral sites, resulting in emission of light with a wavelength of about 700 nm (infrared region), which is justified by the spin-forbidden 2E 4A2 transition. In other words, chromium is a favorable luminescent center, acting as a trap in the crystal structure, since it imprisons the excitation energy easily and releases it gradually, allowing the phosphorescence. It was observed that the composition ... (Complete abastract click electronic access below)

Benefícios na execução de uma obra sustentável em contrapartida aos métodos tradicionais da construção civil

The civil construction sector in Brazil is, simultaneously, a necessity that drives the economy and an evil that degrades the environment. Simple choices adopted in an enterprise can make big difference in harm caused by constructive practices, minimizing its harmful to the environment and making it sustainable. These choices, however, involve the use of materials and techniques often unknown by the builders, since the construction industry is very traditional. Even worse, the eco-friendly materials and sustainable techniques also face another obstacle to its use: the prejudice. Builders and customers prefer traditional methods to sustain belief that they present lower quality and higher price. This work raises awareness of the urgency with traditional methods must be overridden, showing practical and simple ways for this replacement, as well as confirm the quality equal to or even higher in the use of alternative materials and techniques, without addition in cost. Thus, the benefits are generated for all parties involved, from builders to residents

Estudo das propriedades ópticas de pós cerâmicos à base de Zn3Ga2Ge2O10: X% Cr3+ (X = 0 ; 0,5 ; 0,75 ; 1,0)

Ceramic powders based on Zn3Ga2Ge2O10: Cr3+ X% (X = 0.0; 0.5; 0.75; 1.0) were synthesized by solid-state reaction method. The gallium-zinc germanate doped with chromium presents an interesting property of phosphorescence, that means, it is capable of emitting light when excited by a source of radiation, and such emission remains for some time after stopping the source. For this reason, these materials can be widely applied in night-vision surveillance, (through the use of solar energy, for example), electronic devices screen, emergency routes signals, control panels indicators in dark environments, etc. In this job were considered different amounts of dopant in order to perform a comparison of structural and photoluminescent properties. For that, some analyses were performed on samples, such as XRD, FT-Raman, SEM, UV-vis and photoluminescence measurements (PL). Such analysis allowed to infer that the presence of chromium results in no phase transformation, so that the four compositions have the same set of phases: cubic, rhombohedral and hexagonal. Although the structure was not changed, chromium influences other properties / characteristics of these materials. Examples are: increase of band-gap, decrease of average particle size, small changes in binding energy checked by Raman and especially the increase of photoluminescent property. The chromium ions have great ease in replacing gallium ions in octahedral sites, resulting in emission of light with a wavelength of about 700 nm (infrared region), which is justified by the spin-forbidden 2E 4A2 transition. In other words, chromium is a favorable luminescent center, acting as a trap in the crystal structure, since it imprisons the excitation energy easily and releases it gradually, allowing the phosphorescence. It was observed that the composition ... (Complete abastract click electronic access below)

Revisão sistemática sobre antissepsia cirúrgica das mãos com preparação alcoólica em comparação aos produtos tradicionais

A antissepsia cirúrgica das mãos visa à prevenção de infecções do sítio cirúrgico, importante causa de morbimortalidade pós-operatória e aumento dos custos hospitalares. Este estudo teve como objetivo comparar a eficácia de preparações alcoólicas com os produtos tradicionais na antissepsia cirúrgica das mãos por meio de uma revisão sistemática da literatura. Foram considerados estudos primários ou secundários, tendo como desfecho a contagem microbiana das mãos ou taxas de infecções do sítio cirúrgico. A busca foi realizada no Portal BVS, PubMed, Ask e MEDLINE. Foram selecionados 25 estudos (2 revisões sistemáticas, 19 experimentais e 4 de coorte). As preparações alcoólicas tiveram uma redução microbiana igual e/ou maior aos produtos tradicionais em 17 estudos e inferior em 4; as taxas de infecções do sítio cirúrgico foram similares. Portanto, existem evidências científicas que suportam a segurança das preparações alcoólicas para antissepsia cirúrgica das mãos.

Resolubilidade da estratégia saúde da família e unidades básicas de saúde tradicionais: contribuições do Pet-Saúde

O Programa de Educação pelo Trabalho para a Saúde (PET-Saúde) materializa uma política indutora de novas relações entre instituições de ensino de nível superior e a rede assistencial à saúde. A Universidade de São Paulo - Campus de Ribeirão Preto e a Secretaria de Saúde do município, selecionadas pelo PET-Saúde/2009, avaliaram a resolubilidade das Unidades Básicas de Saúde (UBS) e das Unidades de Estratégia Saúde da Família (ESF), como forma de contribuir para a qualificação da Atenção Básica. Foi realizado um estudo transversal em 13 Unidades de Saúde (oito ESF e cinco UBS), com a participação de 216 alunos dos cursos da área da saúde, 30 preceptores (profissionais) da rede pública de saúde e cinco tutores (docentes). Foram coletados dados de 12.494 atendimentos, sendo 7.129 (58,9%) em ESF e 4.963 (41,1%) em UBS, compostos por 4.059 (33,6%) pessoas do sexo masculino e 8.035 (66,4%) do feminino.As UBS referenciaram mais pacientes do que as Unidades de ESF (OR = 1,67; IC 95% 1,46 - 1,90; [p < 0,05]). As especialidades com maior demanda por encaminhamentos foram oftalmologia, cardiologia e ortopedia. A ESF apresenta-se como modelo assistencial com maior resolubilidade, e o PET-Saúde é uma iniciativa importante, considerando-se que estimula a ampliação desse modelo.

Aplicación de la datación por termoluminiscencia a materiales cerámicos prehistóricos de Gran Canaria

[ES] La falta de datos cronológicos en la prehistoria de Gran Canaria, obliga a buscar alternativas viables e interdisciplinares. En este trabajo, se experimenta en la adaptación de los materiales cerámicos al del análisis por termoluminiscencia.