Solid-state MAS NMR studies on the hydrothermal stability of the zeolite catalysts for residual oil selective catalytic cracking

By using the solid-state MAS NMR technique, the hydrothermal stabilities (under 100% steam at 1073 K) of HZSM-5 zeolites modified by lanthanum and phosphorus have been studied. They are excellent zeolite catalysts for residual oil selective catalytic cracking (RSCC) processes. It was indicated that the introduction of phosphorus to the zeolite via impregnation with orthophosphoric acid led to dealumination as well as formation of different Al species, which were well distinguished by Al-27 3Q MAS NMR. Meanwhile, the hydrothermal stabilities of the zeolites (P/HZSM-5, La-P/HZSM-5) were enhanced even after the samples were treated under severe conditions for a prolonged time. It was found that the Si-O-Al bonds were broken under hydrothermal conditions, while at the same time the phosphorous compounds would occupy the silicon sites to form (SiO)(x)Al(OP)(4 - x) species. With increasing time, more silicon sites around the tetrahedral coordinated Al in the lattice can be replaced till the aluminum is completely expelled from the framework. The existence of lanthanum can partially restrict the breaking of the Si-O-Al bonds and the replacement of the silicon sites by phosphorus, thus preventing dealumination under hydrothermal conditions. This was also proved by P-31 MAS NMR spectra. (C) 2004 Elsevier Inc. All rights reserved.

Residual properties of an injection-molded poly(phenylene ether ketone) carbon composite during flexural fatigue

The present work investigates the effects of cyclic fatigue loading on the residual properties of an injection-molded composite, carbon-fiber-reinforced poly(phenylene ether ketone) (CF/PEK-C), and damage development in this material under fatigue lending. Test specimens, which had been conditioned to various preselected fatigue damage stages, were measured for their residual properties. The results indicated that cyclic fatigue loading alters the constitutive behavior of the injection-molded composite, especially in the non-linear portion of the stress/strain curve. The residual strength decreases with increase in the number of fatigue cycles as a consequence of the accumulation of fatigue damage, which is dominated by the growth of microcracks. While the residual modulus increases slightly with cyclic fatigue loading, this is probably due to the oriented hardening resulting from creep deformation which is induced during cyclic loading. (C) 1997 Elsevier Science Limited.

EFFECT OF ETHYLENE-PROPYLENE COPOLYMER WITH RESIDUAL PE CRYSTALLINITY ON MECHANICAL-PROPERTIES AND MORPHOLOGY OF PP/HDPE BLENDS

Morphology and mechanical properties of polypropylene (PP)/high density polyethylene (HDPE) blends modified by ethylene-propylene copolymers (EPC) with residual PE crystallinity were investigated. The EPC showed different interfacial behavior in PP/HDPE blends of different compositions. A 25/75 blend of PP/HDPE (weight ratio) showed improved tensile strength and elongation at break at low EPC content (5 wt %). For the PP/HDPE = 50/50 blend, the presence of the EPC component tended to make the PP dispersed phase structure transform into a cocontinuous one, probably caused by improved viscosity matching of the two components. Both tensile strength and elongation at break were improved at EPC content of 5 wt %. For PP/HDPE 75/25 blends, the much smaller dispersed HDPE phase and significantly improved elongation at break resulted from compatibilization by EPC copolymers. (C) 1995 John Wiley & Sons, Inc.

Produção de biomassa e teores de nutrientes de Ceiba pentandra e Virola surinamensis na Amazônia Ocidental.

2009

Estimativa do acúmulo de biomassa e carbono por sistema silvipastoril implantado em área montanhosa da Zona da Mata Mineira.

2007

Produção de biomassa de mandioca.

A mandioca (Maninhot esculenta Crantz) pode ser destinada ao consumo humano e animal (ruminantes e herbívoros não ruminantes), podendo-se aproveitar as raízes, excelente fonte de energia, as ramas (parte aérea), ricas em proteína, e os subprodutos da industrialização.Considera-se a mandioca como recurso de grande valor para a alimentação nos trópicos, por apresentar características agronômicas específicas que permitem sua exploração não somente em condições de alta tecnologia como também com deficiência de insumos, e também apresentar ampla versatilidade quanto às possibilidades de uso.A parte aérea da mandioca constitui-se em excelente opção para a alimentação de animais, como substituto de parte dos cereais que compõem as rações. Adotando-se um manejo adequado de cultivo, pode-se obter alta produtividade de massa verde. Tal produção pode ser destinada para a alimentação de animais na forma de feno, silagem e ?in natura?, ou como componente protéico e energético na formulação de rações. Um prato típico da região do Recôncavo da Bahia é a maniçoba, feito à base de folha de mandioca, advindo da culinária africana.

Biomassa arbórea em fragmentos da Mata Atlântica Fluminense.

2008

Minimizing Residual Vibrations in Flexible Systems

Residual vibrations degrade the performance of many systems. Due to the lightweight and flexible nature of space structures, controlling residual vibrations is especially difficult. Also, systems such as the Space Shuttle remote Manipulator System have frequencies that vary significantly based upon configuration and loading. Recently, a technique of minimizing vibrations in flexible structures by command input shaping was developed. This document presents research completed in developing a simple, closed- form method of calculating input shaping sequences for two-mode systems and a system to adapt the command input shaping technique to known changes in system frequency about the workspace. The new techniques were tested on a three-link, flexible manipulator.

Residual Vibration Reduction in Computer Controlled Machines

Control of machines that exhibit flexibility becomes important when designers attempt to push the state of the art with faster, lighter machines. Three steps are necessary for the control of a flexible planet. First, a good model of the plant must exist. Second, a good controller must be designed. Third, inputs to the controller must be constructed using knowledge of the system dynamic response. There is a great deal of literature pertaining to modeling and control but little dealing with the shaping of system inputs. Chapter 2 examines two input shaping techniques based on frequency domain analysis. The first involves the use of the first deriviate of a gaussian exponential as a driving function template. The second, acasual filtering, involves removal of energy from the driving functions at the resonant frequencies of the system. Chapter 3 presents a linear programming technique for generating vibration-reducing driving functions for systems. Chapter 4 extends the results of the previous chapter by developing a direct solution to the new class of driving functions. A detailed analysis of the new technique is presented from five different perspectives and several extensions are presented. Chapter 5 verifies the theories of the previous two chapters with hardware experiments. Because the new technique resembles common signal filtering, chapter 6 compares the new approach to eleven standard filters. The new technique will be shown to result in less residual vibrations, have better robustness to system parameter uncertainty, and require less computation than other currently used shaping techniques.

Estimativa de biomassa e estoque de carbono de uma floresta secundária em Minas Gerais.

Em virtude das preocupações mundiais com as quantidades acumuladas de gases de efeito estufa na atmosfera, 175 países assinaram, durante a ECO 92, no Rio de Janeiro, relatório sobre o Painel de Mudanças Climáticas, indicando a necessidade de reduzir as emissões desses gases. Um dos mecanismos, com essa finalidade que tem despertado grande interesse é o financiamento de grandes plantios de árvores visando o seqüestro de quantidades significativas de carbono através da fotossíntese. Tendo em vista que a legislação brasileira de meio ambiente determina a manutenção de uma reserva legal de pelo menos 20% de vegetação natural nas propriedades rurais do sudeste e, considerando-se a forte atividade agropecuária dessa região onde, na paisagem rural, predominam pastos, cultivos e reflorestamentos com Eucalyptus a recuperação das áreas de reserva legal pode atingir escala de interesse, além de contemplar demandas por uma maior proteção da biodiversidade. O presente estudo apresenta estimativas de biomassa e estoque de carbono de uma floresta secundária de cerca de 37 anos por meio de medições diretas, utilizando o método da árvore média. O estudo fitossociológico apontou sete espécies cujas árvores representam cerca de 80,5% de dominância e 77,9% de densidade do sítio, sendo Canudo de Pito, (Mabea fistulifera ? Euphorbiaceae) a espécie arbórea dominante. Obtiveram-se, para biomassa, estimativas de 64.005 Kg.ha-1 por densidade e, por dominância, 66.127 Kg.ha-1. A esses totais correspondem, respectivamente, em quantidades de carbono, 28.802 Kg.ha-1 e 29.757 Kg.ha-1.

Estimativa do estoque de carbono na biomassa do clone de Seringueira RRIM 600 em solos da Zona da Mata, Minas Gerais.

2003