Protesters at pro-ERA Demonstration and Women '80 Demonstration

Inscription: Verso: Women '80 demonstration, New York. Around the clock watch for the ERA.

Pro-ERA Demonstration and Women '80 Demonstration.

Inscription: Verso: Women '80 demonstration, New York. Around the clock watch for the ERA.

Pro-ERA Demonstration and Women '80 Demonstration.

Inscription: Verso: Women '80 demonstration, New York. Around the clock watch for the ERA.

Dynamic classifiers for neonatal brain monitoring

Brain injury due to lack of oxygen or impaired blood flow around the time of birth, may cause long term neurological dysfunction or death in severe cases. The treatments need to be initiated as soon as possible and tailored according to the nature of the injury to achieve best outcomes. The Electroencephalogram (EEG) currently provides the best insight into neurological activities. However, its interpretation presents formidable challenge for the neurophsiologists. Moreover, such expertise is not widely available particularly around the clock in a typical busy Neonatal Intensive Care Unit (NICU). Therefore, an automated computerized system for detecting and grading the severity of brain injuries could be of great help for medical staff to diagnose and then initiate on-time treatments. In this study, automated systems for detection of neonatal seizures and grading the severity of Hypoxic-Ischemic Encephalopathy (HIE) using EEG and Heart Rate (HR) signals are presented. It is well known that there is a lot of contextual and temporal information present in the EEG and HR signals if examined at longer time scale. The systems developed in the past, exploited this information either at very early stage of the system without any intelligent block or at very later stage where presence of such information is much reduced. This work has particularly focused on the development of a system that can incorporate the contextual information at the middle (classifier) level. This is achieved by using dynamic classifiers that are able to process the sequences of feature vectors rather than only one feature vector at a time.

Radiopacity and Chemical resistance of Elastomer-Barium sulphate nanocomposites

The Human race of our century is in gluttonous search for novel engineering products which led to a skyrocketed progress in research and fabrication of filled polymers. Recently, a big window has been opened up for speciality polymers especially elastomers with promising properties. Among the many reasons why rubbers are widely used in the process industries, three are considered as important. Firstly, rubbers operate in a variety of environments and possess usable ranges of deformity and durability and can be exploited through suitable and more or less conventional equipment design principles. Secondly, rubber is an eminently suitable construction material for protection against corrosion in the chemical plant and equipment against various corrosive chemicals as, acids and alkalies and if property tailored, can shield ionising radiations as X-rays and gamma rays in medical industry, with minimum maintenance lower down time, negligible corrosion and a preferred choice for aggressive corroding and ionising environment. Thirdly, rubber can readily and hastily, and at a relatively lower cost, be converted into serviceable products, having intricate shapes and dimensions. In a century’s gap, large employment of flexible polymer materials in the different segments of industry has stimulated the development of new materials with special properties, which paved its way to the synthesis of various nanoscale materials. At nano scale, one makes an entry into a world where multidisciplinary sciences meet and utilises the previously unapproached infinitesimal length scale, having dimension which measure upto one billionth of a meter, to create novel properties. The nano fillers augment the elastomers properties in an astonishing fashion due to their multifunctional nature and unprecedented properties have been exhibited by these polymer-nanocomposites just to beat the shortcomings of traditional micro composites. The current research aims to investigate the possibility of using synthesised nano barium sulphate for fabricating elastomer-based nanocomposites and thereby imparting several properties to the rubber. In this thesis, nano materials, their synthesis, structure, properties and applications are studied. The properties of barium sulphate like chemical resistance and radiopacity have been utilized in the present study and is imparted to the elastomers by preparing composites.

La perception du temps et sa modulation par la température chez les guêpes parasitoïdes

Les modèles d'optimalité postulent que les animaux en quête de ressources utilisent le taux de gain de valeur adaptative pour optimiser plusieurs comportements tels que la répartition du temps lors de l’exploitation d‘un agrégat et l'investissement en progénitures. Bien que la durée de plusieurs comportements doit être régulée, peu d’évidences de la perception du temps sont actuellement disponibles pour les insectes et aucune pour les guêpes parasitoïdes, et ce malgré leur importance en tant que modèles écologiques. De plus, puisque les guêpes parasitoïdes sont poïkilothermes, cette capacité pourrait être affectée par la température. Nous avons supposé que les guêpes parasitoïdes auraient la capacité de percevoir le temps, à la fois de façon prospective (mesure du temps écoulé) et rétrospective (durée d'un événement passé), afin d'optimiser les décisions liées à l'exploitation d’agrégats d’hôtes et à la reproduction. Nous avons également émis l'hypothèse que la température aurait une incidence sur la perception du temps des guêpes parasitoïdes. Pour la mesure prospective du temps, nous avons utilisé la capacité d’apprentissage associatif de Microplitis croceipes (Hymenoptera: Braconidae). Les guêpes ont été entraînées à associer une odeur à la durée d'un intervalle entre des hôtes. Après leur entraînement, elles ont été testées dans un tunnel de vol avec un choix d’odeurs. Les guêpes ont choisi majoritairement l'odeur associée à l'intervalle de temps auquel elles étaient testées. Nous avons également investigué le rôle de la dépense énergétique sur la mesure du temps. Suite à une restriction de mouvement des guêpes pendant l'intervalle de temps entre les hôtes, elles choisissaient aléatoirement dans le tunnel de vol. L'absence de dépense énergétique les aurait rendues incapables de mesurer le temps. La dépense d'énergie est donc un substitut essentiel pour mesurer le temps. Pour la mesure rétrospective du temps, nous avons utilisé le processus d'évaluation de l'hôte de Trichogramma euproctidis (Hymenoptera: Trichogrammatidae). Certains trichogrammes utilisent la durée du transit initial sur l'œuf hôte afin d’en évaluer la taille et d’ajuster le nombre d’œufs à y pondre. Nous avons augmenté artificiellement la durée de transit initiale de T. euproctidis en suspendant l'œuf hôte pour le faire paraître plus gros qu'un œuf de taille similaire. Une augmentation de la durée de transit initiale a augmenté la taille de la ponte. Ceci démontre la capacité de T. euproctidis de mesurer la durée du transit initial, et donc d’une mesure du temps rétrospective. Pour déterminer si la température modifie la mesure du temps dans les espèces poïkilothermes, nous avons utilisé le comportement d’exploitation d’agrégats d’hôtes de T. euproctidis. Les modèles d’optimalités prédisent que les guêpes devraient rester plus longtemps et quitter à un faible taux de gain de valeur adaptative suite à un déplacement de longue durée plutôt que pour un déplacement de courte durée. Nous avons testé l'impact d'un déplacement de 24 h à différentes températures sur l'exploitation d’agrégats d’hôtes. Un déplacement à température chaude augmente le temps de résidence dans l’agrégat et diminue le taux de gain de valeur adaptative au moment de quitter ; ces comportements sont associés à un trajet de longue durée. L'inverse a été observé lors d’un déplacement à une température froide. Les températures chaude et froide ont modulé la mesure du temps en accélérant ou ralentissant l'horloge biologique, faisant paraître le déplacement respectivement plus long ou plus court qu’il ne l’était réellement. Ces résultats démontrent clairement que les guêpes parasitoïdes ont la capacité de mesurer le temps, autant rétrospectivement que prospectivement. Des preuves directes de leur capacité sont maintenant disponibles pour au moins deux espèces de guêpes parasitoïdes, une composante essentielle des modèles d'optimalité. Le rôle de la dépense énergétique dans la mesure du temps a aussi été démontré. Nos résultats fournissent également la preuve de l'impact de la température sur la perception du temps chez les insectes. L'utilisation de la dépense énergétique en tant que proxy pour mesurer le temps pourrait expliquer une partie de sa thermosensibilité, puisque les guêpes parasitoïdes sont poïkilothermes. Cette mesure du temps sensible à la température pourrait affecter des stratégies de lutte biologique. Sur le terrain, au début de la journée, la température de l'air sera similaire à la température de l'air autour des plantes infestées par des parasites, alors qu'elle sera plus chaude pendant la journée. En lutte biologique augmentative, les guêpes parasitoïdes libérées resteraient plus longtemps dans les agrégats d’hôtes que celles relâchées en début de journée.

Elvaåringars skriftbruk till vardags och i skolan

The written word ‘surrounds us round the clock’. Consequently, it is difficult to determine the border between children’s school literacy and their vernacular literacy outside school. The aim of this article is therefore to describe some everyday literacy events and their relation to literacy events in grade 5 in school.  The concept literacy covers broader ways of reading and writing and is understood in the social context in which it is used and acquired. Children use different written modes of communication outside school, for example, Facebook and blogs, but seldom books. In school, on the other hand, they usually write with a pen and read books made of paper. The children’s vernacular literacy practices and school literacy practices meet during school breaks, where students’ texting and typing are visible. The different use of modes, tools and literacy events among students are something that probably should be problematized and discussed within schools with the aim of drawing on everyday practices to enhance educational development.

Propriedades Psicométricas do Teste Stroop numa Amostra de Adultos da População Portuguesa: estudo preliminar

Objetivos: O presente estudo insere-se no Projeto - Estudos Normativos de Instrumentos Neuropsicologicos (ENIN) e tem por objetivo analisar as propriedades psicométricas do Teste Stroop, fornecendo dados normativos de uma amostra da População Portuguesa. Métodos: Selecionámos e inquirimos 671 sujeitos. As variáveis independentes estudadas foram idade, sexo, escolaridade e profissão. Foram utilizados vários testes neste estudo, contribuindo para a obtenção de validade convergente: Bateria de Avaliação Frontal-FAB, Figura Complexa de Rey-Osterrieth e Teste do Relógio. Foram estudadas a consistência interna e a estabilidade temporal do Teste Stroop. Resultados: A nossa amostra ficou constituída por 310 sujeitos (46,2%) do sexo masculino e 361 (53,8%) do sexo feminino, com idades compreendidas entre os 18 e 100 anos (M = 41,12; DP = 20,85). No que se refere ao nível de escolaridade (M = 5,71; DP = 1,45), este variou entre o 1º Ciclo do Ensino Básico e o Ensino Superior. As profissões, exercidas inseriram-se maioritariamente na categoria das profissões intelectuais (N = 281; 84,9%). Relativamente às variáveis sociodemográficas, verificámos que a idade, sexo, escolaridade e profissão influenciam nas provas de Leitura e Nomeação de Cor do Teste Stroop. No que diz respeito à validade convergente, observámos que a prova de Nomeação de Cor apresentou correlações positivas fracas com o FAB, Figura Complexa de Rey-Cópia (FCR-Cópia) e Teste do Relógio, e correlações positivas moderadas com a prova de Leitura. A consistência interna do Teste Stroop apresentou uma elevada confiabilidade (α = 0,99). A correlação teste-reteste apenas se mostrou significativa para a prova de Nomeação de Cor. Conclusão: Este estudo mostra que o Teste Stroop é promissoriamente confiável como instrumento de avaliação neuropsicológica, podendo potencialmente ser utilizado para qualquer faixa etária da população. Em estudos futuros são necessárias amostras com números mais elevados de participantes nas faixas etárias acima dos 30 anos, representativas dos níveis de escolaridade abaixo do 9ºano, a exercerem profissões manuais, e com residência noutras regiões geográficas para além do Centro. / Objectives: The present study is part of the Project - Estudos Normativos de Instrumentos Neuropsicologicos (ENIN) and aims to analyze the psychometric properties of the Stroop test. Methods: We have selected, and we also enquired 671 subjects. The independent variables studied were age, gender, education and profession. Several tests were used in this study for analysis of convergent validity: convergent validity: Frontal Assessment Battery-FAB, Complex Figure Rey-Osterrieth and the clock test. We also studied the internal consistency and the temporal stability of the Stroop test. Results: Our sample was composed of 310 subjects (46.2%) male and 361 (53.8%) females, with ages between 18 and 100 years (M = 41.12; SD = 20.85). The level of schooling (M = 5.71; SD = 1.45) ranged between the 1st cycle and the Higher Education. The professions were mainly intellectual ones (N = 281; 84.9%). On sociodemographic variables, we found that the age, sex, education and profession influenced reading and Color naming of Stroop test. Regarding convergent validity, Color naming showed weak positive correlations with the FAB, Complex Figure Rey-Copy, and the clock test. Color naming moderate positive correlations with the reading. The internal consistency of the Stroop test was high (α = 0.99). The test-retest correlation was significant only for Color naming. Conclusion: This study shows that the Stroop test is promissory reliable instrument of neuropsychological assessment and may potentially be used for any age range of the population. In future research, it is necessary to enroll samples with higher numbers of participants above 30 years, representative of the levels of schooling below the 9º grade, with more manual professions represented, and with residence in other geographic regions in addition to the Center region of Portugal.

Contributo para o Estudo das Propriedades Psicométricas: Teste do Desenho do Relógio numa Amostra da População Portuguesa

Objetivo: Estudar as propriedades psicométricas do Teste do Desenho do Relógio numa amostra da população portuguesa. Método: A amostra é constituída por 749 pessoas (345 homens e 404 mulheres), com idades compreendidas entre os 18 e os 94 anos. Todos os participantes preencheram uma declaração de consentimento informado e uma bateria de testes neuropsicológicos. Resultados: A média no Teste do Desenho do Relógio foi de 4,10 (DP = 1,25). Os resultados demonstraram que as variáveis sociodemográficas (idade, escolaridade, profissão, regiões e tipologia de áreas urbanas) apresentaram ter influência significativa nas pontuações do Teste do Desenho do Relógio. A confiabilidade e a estabilidade temporal revelaram-se adequadas. Conclusão: Os dados do nosso estudo indicam que o Teste do Desenho do Relógio pode ser utilizado pela população portuguesa. / Purpose: To study the psychometric properties of the Clock Drawing Test in a Portuguese sample. Method: The sample consists of 749 people (345 men and 404 women), aged between 18 and 94 years. All participants filled an informed consent form and a battery of neuropsychological tests. Results: The average in Clock Drawing Test was 4.10 (SD = 1.25). The results showed that the sociodemographic variables (age, education, profession, region, and typology of urban areas) showed significant influence on Clock Drawing Test scores. The reliability and temporal stability of Clock Drawing Test proved appropriate. Conclusion: The data from our study indicate that the Clock Drawing Test may be used by the Portuguese population.

La perception du temps et sa modulation par la température chez les guêpes parasitoïdes

Les modèles d'optimalité postulent que les animaux en quête de ressources utilisent le taux de gain de valeur adaptative pour optimiser plusieurs comportements tels que la répartition du temps lors de l’exploitation d‘un agrégat et l'investissement en progénitures. Bien que la durée de plusieurs comportements doit être régulée, peu d’évidences de la perception du temps sont actuellement disponibles pour les insectes et aucune pour les guêpes parasitoïdes, et ce malgré leur importance en tant que modèles écologiques. De plus, puisque les guêpes parasitoïdes sont poïkilothermes, cette capacité pourrait être affectée par la température. Nous avons supposé que les guêpes parasitoïdes auraient la capacité de percevoir le temps, à la fois de façon prospective (mesure du temps écoulé) et rétrospective (durée d'un événement passé), afin d'optimiser les décisions liées à l'exploitation d’agrégats d’hôtes et à la reproduction. Nous avons également émis l'hypothèse que la température aurait une incidence sur la perception du temps des guêpes parasitoïdes. Pour la mesure prospective du temps, nous avons utilisé la capacité d’apprentissage associatif de Microplitis croceipes (Hymenoptera: Braconidae). Les guêpes ont été entraînées à associer une odeur à la durée d'un intervalle entre des hôtes. Après leur entraînement, elles ont été testées dans un tunnel de vol avec un choix d’odeurs. Les guêpes ont choisi majoritairement l'odeur associée à l'intervalle de temps auquel elles étaient testées. Nous avons également investigué le rôle de la dépense énergétique sur la mesure du temps. Suite à une restriction de mouvement des guêpes pendant l'intervalle de temps entre les hôtes, elles choisissaient aléatoirement dans le tunnel de vol. L'absence de dépense énergétique les aurait rendues incapables de mesurer le temps. La dépense d'énergie est donc un substitut essentiel pour mesurer le temps. Pour la mesure rétrospective du temps, nous avons utilisé le processus d'évaluation de l'hôte de Trichogramma euproctidis (Hymenoptera: Trichogrammatidae). Certains trichogrammes utilisent la durée du transit initial sur l'œuf hôte afin d’en évaluer la taille et d’ajuster le nombre d’œufs à y pondre. Nous avons augmenté artificiellement la durée de transit initiale de T. euproctidis en suspendant l'œuf hôte pour le faire paraître plus gros qu'un œuf de taille similaire. Une augmentation de la durée de transit initiale a augmenté la taille de la ponte. Ceci démontre la capacité de T. euproctidis de mesurer la durée du transit initial, et donc d’une mesure du temps rétrospective. Pour déterminer si la température modifie la mesure du temps dans les espèces poïkilothermes, nous avons utilisé le comportement d’exploitation d’agrégats d’hôtes de T. euproctidis. Les modèles d’optimalités prédisent que les guêpes devraient rester plus longtemps et quitter à un faible taux de gain de valeur adaptative suite à un déplacement de longue durée plutôt que pour un déplacement de courte durée. Nous avons testé l'impact d'un déplacement de 24 h à différentes températures sur l'exploitation d’agrégats d’hôtes. Un déplacement à température chaude augmente le temps de résidence dans l’agrégat et diminue le taux de gain de valeur adaptative au moment de quitter ; ces comportements sont associés à un trajet de longue durée. L'inverse a été observé lors d’un déplacement à une température froide. Les températures chaude et froide ont modulé la mesure du temps en accélérant ou ralentissant l'horloge biologique, faisant paraître le déplacement respectivement plus long ou plus court qu’il ne l’était réellement. Ces résultats démontrent clairement que les guêpes parasitoïdes ont la capacité de mesurer le temps, autant rétrospectivement que prospectivement. Des preuves directes de leur capacité sont maintenant disponibles pour au moins deux espèces de guêpes parasitoïdes, une composante essentielle des modèles d'optimalité. Le rôle de la dépense énergétique dans la mesure du temps a aussi été démontré. Nos résultats fournissent également la preuve de l'impact de la température sur la perception du temps chez les insectes. L'utilisation de la dépense énergétique en tant que proxy pour mesurer le temps pourrait expliquer une partie de sa thermosensibilité, puisque les guêpes parasitoïdes sont poïkilothermes. Cette mesure du temps sensible à la température pourrait affecter des stratégies de lutte biologique. Sur le terrain, au début de la journée, la température de l'air sera similaire à la température de l'air autour des plantes infestées par des parasites, alors qu'elle sera plus chaude pendant la journée. En lutte biologique augmentative, les guêpes parasitoïdes libérées resteraient plus longtemps dans les agrégats d’hôtes que celles relâchées en début de journée.

Desenvolvimento de guias didáticos para a utilização de objetos de aprendizagem

Dissertação (mestrado)—Universidade de Brasília, Instituto de Física, Programa de Pós-Graduação em Física, 2015.

Physical Design Methodologies for Low Power and Reliable 3D ICs

As the semiconductor industry struggles to maintain its momentum down the path following the Moore's Law, three dimensional integrated circuit (3D IC) technology has emerged as a promising solution to achieve higher integration density, better performance, and lower power consumption. However, despite its significant improvement in electrical performance, 3D IC presents several serious physical design challenges. In this dissertation, we investigate physical design methodologies for 3D ICs with primary focus on two areas: low power 3D clock tree design, and reliability degradation modeling and management. Clock trees are essential parts for digital system which dissipate a large amount of power due to high capacitive loads. The majority of existing 3D clock tree designs focus on minimizing the total wire length, which produces sub-optimal results for power optimization. In this dissertation, we formulate a 3D clock tree design flow which directly optimizes for clock power. Besides, we also investigate the design methodology for clock gating a 3D clock tree, which uses shutdown gates to selectively turn off unnecessary clock activities. Different from the common assumption in 2D ICs that shutdown gates are cheap thus can be applied at every clock node, shutdown gates in 3D ICs introduce additional control TSVs, which compete with clock TSVs for placement resources. We explore the design methodologies to produce the optimal allocation and placement for clock and control TSVs so that the clock power is minimized. We show that the proposed synthesis flow saves significant clock power while accounting for available TSV placement area. Vertical integration also brings new reliability challenges including TSV's electromigration (EM) and several other reliability loss mechanisms caused by TSV-induced stress. These reliability loss models involve complex inter-dependencies between electrical and thermal conditions, which have not been investigated in the past. In this dissertation we set up an electrical/thermal/reliability co-simulation framework to capture the transient of reliability loss in 3D ICs. We further derive and validate an analytical reliability objective function that can be integrated into the 3D placement design flow. The reliability aware placement scheme enables co-design and co-optimization of both the electrical and reliability property, thus improves both the circuit's performance and its lifetime. Our electrical/reliability co-design scheme avoids unnecessary design cycles or application of ad-hoc fixes that lead to sub-optimal performance. Vertical integration also enables stacking DRAM on top of CPU, providing high bandwidth and short latency. However, non-uniform voltage fluctuation and local thermal hotspot in CPU layers are coupled into DRAM layers, causing a non-uniform bit-cell leakage (thereby bit flip) distribution. We propose a performance-power-resilience simulation framework to capture DRAM soft error in 3D multi-core CPU systems. In addition, a dynamic resilience management (DRM) scheme is investigated, which adaptively tunes CPU's operating points to adjust DRAM's voltage noise and thermal condition during runtime. The DRM uses dynamic frequency scaling to achieve a resilience borrow-in strategy, which effectively enhances DRAM's resilience without sacrificing performance. The proposed physical design methodologies should act as important building blocks for 3D ICs and push 3D ICs toward mainstream acceptance in the near future.

Learning math through movement: physical education as another alternative

The purpose of this study was to determine the cognitive effects of applying physical recreational activities to two groups of pre-school students, related to mathematics to one of the groups and recreational games to the other.  A total of 27 subjects (13 girls and 14 boys) of 5 and a half and 6 and half years of age participated in the study.  The instrument used was a questionnaire including basic math concepts such as geometry, basic operations with concrete elements, and how to read the clock, based on the topics established by the Costa Rican Ministry of Public Education.  Once the instrument was developed, a plan of physical recreational activities related to math was prepared and applied to the experimental group (pre-school B) for one and a half months, while the other group played recreational games.  Data was analyzed using descriptive and inferential statistics.  Positive and significant effects were found in the physical recreational activity program regarding student performance in 10 of the 12 items that were applied to assess mastery of basic math concepts.  In conclusion, using physical education as another instrument to teach other disciplines represents an excellent alternative for pre-school teachers that try to satisfy the learning needs of children that will soon be attending school.  Using movement as part of guided and planned activities plays an indispensable role in children’s lives; therefore, learning academic subjects should be adapted to their needs to explore and know their environment.

Accuracy of rate estimation using relaxed-clock models with a critical focus on the early metazoan radiation

In recent years, a number of phylogenetic methods have been developed for estimating molecular rates and divergence dates under models that relax the molecular clock constraint by allowing rate change throughout the tree. These methods are being used with increasing frequency, but there have been few studies into their accuracy. We tested the accuracy of several relaxed-clock methods (penalized likelihood and Bayesian inference using various models of rate change) using nucleotide sequences simulated on a nine-taxon tree. When the sequences evolved with a constant rate, the methods were able to infer rates accurately, but estimates were more precise when a molecular clock was assumed. When the sequences evolved under a model of autocorrelated rate change, rates were accurately estimated using penalized likelihood and by Bayesian inference using lognormal and exponential models of rate change, while other models did not perform as well. When the sequences evolved under a model of uncorrelated rate change, only Bayesian inference using an exponential rate model performed well. Collectively, the results provide a strong recommendation for using the exponential model of rate change if a conservative approach to divergence time estimation is required. A case study is presented in which we use a simulation-based approach to examine the hypothesis of elevated rates in the Cambrian period, and it is found that these high rate estimates might be an artifact of the rate estimation method. If this bias is present, then the ages of metazoan divergences would be systematically underestimated. The results of this study have implications for studies of molecular rates and divergence dates.

Beat-mixing Rock music: Rock and electronic dance music merge to create the Manarays

This research introduces the proposition that Electronic Dance Music’s beat-mixing function could be implemented to create immediacy in other musical genres. The inclusion of rhythmic sections at the beginning and end of each musical work created a ‘DJ friendly’ environment. The term used in this thesis to refer to the application of beat-mixing in Rock music is ‘ClubRock’. Collaboration between a number of DJs and Rock music professionals applied the process of beat-mixing to blend Rock tracks to produce a continuous ClubRock set. The DJ technique of beat-mixing Rock music transformed static renditions into a fluid creative work. The hybridisation of the two genres, EDM and Rock, resulted in a contribution to Rock music compositional approaches and the production of a unique Rock album; Manarays—Get Lucky.